Southern Folger 1051E User Manual

JAMB MOUNTED FOR
SWINGING DOORS

Maximum

1051E-1: KEYED ONE SIDE
1051E-2: KEYED BOTH SIDES

APPLICATION:

For maximum security swinging
doors that are to be unlocked
from a remote location. Jamb
mounted. Door position indicator
switch, door closer and heavy
duty door pull are recommended.

security.

E L E C T R I C L O C K S

1051E

SOLENOID OPERATED

ELECTRO-MECHANICAL

DEADLATCH

FUNCTION:

ELECTRIC - Remote switch
activates a solenoid which retracts
the latchbolt. Latchbolt remains
retracted until door is opened
approximately 2", then it releases,
automatically latches and
deadlocks when the door is closed.

MECHANICAL - Latchbolt is
retracted by a paracentric key at
the door and remains retracted
until door is opened approximately
2", then it releases, automatically
latches and deadlocks when the
door is closed.

Automatic deadlatch feature is
suspended when paracentric key
is rotated to mechanical key
hold-back position. Normal
function is resumed when key is
returned to deadlocked position.

UL

Revised 3/09

FOR MORE INFORMATION, PLEASE CALL 210-533-1231

B3

JAMB MOUNTED FOR
SWINGING DOORS

Maximum security.

STANDARD FEATURES:

• Deadlock indication switch

• Mechanical latchback

• Six-tumbler lock

• Plug connector

• Continuous duty solenoid

• Fail secure

• Mounting fasteners

• Mechanical key holdback

• Adjustable deadlock actuator

OPTIONAL FEATURES:

NO LATCHBACK - Latchbolt
remains retracted as long as
control switch is activated.
Latchbolt extends when power

is removed. Specify “NL.”

E L E C T R I C L O C K S

1051E SOLENOID OPERATED

ELECTRO-MECHANICAL

DEADLATCH

Door Preparation

NOTE: Drawing for illustration only. Reference template

Swing Chart: Specify circled swing number when ordering.

Frame Preparation

for specific Information.

EMERGENCY EXIT
DOOR HOLDBACK ­Dead bolt retracted by solenoid or
by key, extended by key only
(no snap latch feature). When
dead bolt is extended, lock is
deadlocked. UL Listing for fire door
not available with this function.
Specify “EED.”

* Indicates lock mounting/ access plate side.

TECHNICAL DATA:

• STANDARD FINISH:
Galvanized

• COVER: 3/16" steel plate

• CASE: 3/16" steel plate

•LATCHBOLT:
Cold-rolled, steel

• DEADLOCK ACTUATOR:
Stainless steel

• PARACENTRIC
CYLINDER:
Silicon bronze/copper alloy

• TUMBLERS: Spring
tempered brass. Tumblers
actuated by phosphor
bronze springs, six
tumblers per lock

• ELECTRICAL: 115 VAC,
1 phase, 60 Hz., 12 amp
inrush current, 0.6 amp
seated current

• LOCK SIZE:
13-3/8" H x 9" W x 3-1/8" D

• LOCK WEIGHT: 50 lbs.

• LATCHBOLT SIZE:
2" x 3/4"

• LATCHBOLT THROW: 1"

• UL Listed for use on

three-hour fire doors.

• UL Listed as burglary
resistant.

• ASTM F 1577 Certified
Impact Test-Grade 1.

B4

Revised 3/09

P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: [phone]