Southern Folger 10195R User Manual
JAMB MOUNTED FOR
SWINGING DOORS
Minimum and medium security.
R E T R O F I T L O C K S
SOUTHERN STEEL 10195R
SOLENOID OPERATED
ELECTRO-MECHANICAL
10195R-1: KEYED ONE SIDE
10195R-2: KEYED TWO SIDES
APPLICATION:
Direct replacement for Southern
Steel 10195 series locks.
Minimum and medium security
swinging doors that are to be
unlocked from a remote
location. Jamb mounted.
Door position indicator switch,
door closer and heavy duty
door pull are recommended.
FUNCTION:
ELECTRIC - Remote switch
activates a solenoid which
retracts the latchbolt. Latchbolt
remains retracted approximately
2 seconds, then it releases,
automatically latches and
deadlocks when the door
is closed.
DEADLATCH REPLACEMENT
MECHANICAL - Latchbolt is
retracted with a builder’s
hardware key at the door, and
remains retracted while key is
held in retracted position. When
latchbolt is no longer held by
key, the lock latches and
deadlocks when the door
is closed.
11/12
FOR MORE INFORMATION, PLEASE CALL 210-533-1231
R1
JAMB MOUNTED FOR
ADAPTING CONTROL
MODULE INCLUDED
(
NOT SHOWN)
STRIKE IS DOOR
DEPTH DEPENDENT
DOOR MODIFICATION
MAY BE REQUIRED
T
O FIT LIP ON STRIKE
CYLINDER
PROTECTING
R
ING / COLLAR
P
ER CUSTOMER
SWINGING DOORS
Minimum and medium security.
STANDARD FEATURES:
• Deadlock indication switch
• 2 second electrical holdback
• Strike with security fasteners
• Faceplate with security fasteners
• Plug connector
• High power, dual coil solenoid with
overload protection. Intermittent
coil is protected by module.
Second coil is continuous duty.
• Fail secure
• Mounting fasteners
R E T R O F I T L O C K S
10195R SOLENOID OPERATED
ELECTRO-MECHANICAL
DEADLATCH REPLACEMENT
OPTIONAL FEATURES:
FOR ORDERING NEW BUILDER’S
HARDWARE CYLINDERS Specify:
• “10195R-1” keyed one side.
• “10195R-2” keyed both sides.
KEY CYLINDER EXTENDER Special order - priced on request.
R2
11/12
Strike is supplied with lip. Modifications for clearance may be required.
NOTE: Drawing for illustration only. Reference template
Swing Chart: Specify circled swing number when ordering.
TECHNICAL DATA:
• STANDARD FINISH: US32D
• LOCK BODY: Stainless steel
• FACE PLATE: Stainless steel
• LATCHBOLT: Stainless steel
• DEADLOCK ACTUATOR:
Stainless steel
• ELECTRICAL:
24 VDC, 3.6 amp inrush,
.32 amp seated*
• LOCK SIZE:
13-3/8" H x 1-1/2" W x 1-13/16" D
• LOCK WEIGHT: 4.1 lbs.
• LATCHBOLT SIZE: 1-5/8" H x 5/8" TK
• LATCHBOLT THROW: 3/4"
• BUILDER’S CYLINDER:
1-5/32" diameter with standard
Yale cam or equal
*Minimum voltage 22VDC when unlock solenoid energized.
Maximum voltage not greater than 28VDC at any point.
Frame Preparation
for specific Information.
TO ORDER:
• Provide door thickness
of 1-3/4" or 2"
• Handing
P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: 210-533-2211
Loading...