Southern Folger 10120AM User Manual

JAMB MOUNTED FOR SWINGING DOORS

Medium and maximum security.

E L E C T R I C L O C K S

10120AM

MOTOR OPERATED

ELECTRO-MECHANICAL

10120AM-1: KEYED ONE SIDE 10120AM-2: KEYED BOTH SIDES

APPLICATION:

Medium and maximum security swinging doors that are to be unlocked from a remote location. Jamb mounted. Door position indicator switch, door closer and heavy duty door pull are recommended.

FUNCTION:

ELECTRIC - Remote switch activates a motor which retracts the latchbolt. Latchbolt remains retracted until door is opened approximately 2", then it releases, automatically latches and deadlocks when the door is closed.

DEADLATCH

MECHANICAL - Latchbolt is retracted with a mogul key at the door, and remains retracted until door is opened approximately 2", then it releases and automatically latches and deadlocks when the door is closed.

Revised 3/09

FOR MORE INFORMATION, PLEASE CALL 210-533-1231

B11

JAMB MOUNTED FOR SWINGING DOORS

Medium and maximum security.

STANDARD FEATURES:

• Deadlock indication switch

• Mechanical latchback

• Strike with security fasteners

• Mogul cylinder (US26D Finish)

• Plug connector

• High torque motor

• Fail secure

• Mounting fasteners

OPTIONAL FEATURES:

HALF CYCLE HOLDBACK - Remote two-position maintained contact switch is required for this function. Latchbolt is retracted electrically when switch is in open position. When remote switch is returned to locked position, latchbolt will extend when door is opened approximately 2". UL Listing for fire door not available with this function. Specify “D.”

NO LATCHBACK - Allows latchbolt to extend without opening door. Normally used with “D” function. Specify “NL.”

KNOB FUNCTION - Bolt retracted by knob on opposite side of mogul cylinder only. Specify “K.”

MECHANICAL KEY HOLDBACK - Bolt retracted by key, remains retracted until manually projected with key. UL Listing for fire door not available with this function. Specify “MKH.”

LOCAL ELECTRIC KEYSWITCH - Day key provides local electric operation and may be disabled from remote control point. Master key provides both electric and mechanical operation. Specify “LEK.”

NOTE: Master keying available.

KEY CYLINDER EXTENDER - An option in place of providing a recess in the frame when keying on the stop side is required. Available in 3" or 5". 3” extender can be used on openings up to 6” jamb. 5” extender can be used on openings up to 8” jamb. Specify “KCE,” then extender size. Other lengths available upon request.

PROVIDE:(See Fig.1)

1. Dimension “A” (overall frame width)

2. Dimension “B” (edge of frame to center line of lockbolt)

24 VDC MOTOR - Specify “24 VDC.”

E L E C T R I C L O C K S

10120AM MOTOR OPERATED

ELECTRO-MECHANICAL DEADLATCH

Preparation

Door

NOTE: Drawing for illustration only. Reference template

Swing Chart: Specify circled swing number when ordering.

Indicates both mounting /access plate side.

TECHNICAL DATA:

• STANDARD FINISH: Galvanized

• COVER: 10 gauge steel plate

• CASE: 10 gauge steel plate

• STRIKE: Stainless steel

• LATCHBOLT: Stainless steel

• DEADLOCK ACTUATOR: Stainless steel

• MOGUL CYLINDER: US26D

• MOGUL KEYS: Nickel Silver

• PIN TUMBLERS: Combination nickel silver and stainless steel, 6 tumblers per lock

Frame Preparation

for specific Information.

• ELECTRICAL: 115 VAC, 1 phase, 60 Hz., 2.4 amp inrush, 1.8 amp running, 24 VDC (Optional) 3.3 amp

maximum

• LOCK SIZE: 12" H x 5-7/16" W x 3-1/2" D

• LOCK WEIGHT: 19 lbs.

• LATCHBOLT SIZE: 1-1/2" x 3/4"

• LATCHBOLT THROW: 1"

• UL Listed for use on threehour fire doors.

• UL Listed as burglary resistant.

• ASTM F 1577 Certified

Impact Test-Grade1. (115VAC and 24 VDC motor)

B12

Revised 3/09

P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: 210-533-2211