|
GAS TILTING SKILLET |
A Middleby Company |
30 AND 40 GALLON |
|
|
|
|
Job
Model |
Capacity |
|
BGLTS-30 |
30 Gallon |
114 liter |
BGLTS-40 |
40 Gallon |
152 liter |
Item#
Standard Features
-Stainless steel construction
-Stainless steel spring assisted hinged cover with handle and no drip condensate guide
-Front hinged for easy tilting and pour control
-Removable pour strainer
-5/8” thick stainless steel interior for even heat distribution
-Stainless steel front control console with temperature thermostat, temperature light, tilt switch and high limit thermostat
-Electric motor driven screw hack for smooth and precise tilting action
-BGLTS-30 - 80,000 BTU
BGLTS-40 - 100,000 BTU
CONSTRUCTION SPECIFICATIONS
Southbend gas fired tilting skillet. The BGLTS has a spring assisted hinged stainless steel cover, complete with handle and a no drip condensate guide. The pan body shall be front hinged for tilting and easy pour control and comes complete with a removable pour strainer. Pan is formed from 10 gauge stainless steel with a satin finish exterior and polished interior for ease of cleaning. Cooking surface shall be 5/8” thick stainless steel clad plate ensuring even heat distribution over entire cooking surface. The pan shall be fitted with tubular heating elements clamped to the underside. The pan shall be mounted on a heavy duty welded angel constructed frame on stainless steel tubular legs with adjustable bullet feet on
the front and flange feet on the rear for securing to the floor. Front control console, constructed of #4 finish stainless steel house all controls, which include temperature thermostat, temperature light, tilt switch and high limit thermostat. The skillet operates in a temperature range of 100°F to 450°F (38°C to 232°C)
Tilting is controlled by a electronic motor driven screw jack for smooth and precise tilting action.
The 30 gallon capacity unit is rated at 80,000 BTU and the 40 gallon unit is rated at 100,000 BTU. Both units are AGA/CGA Certified and NSF Approved.
|
|
|
|
Form BGLTS |
A Middleby Company |
05/04 Printed in USA |
|
Loading...