Sound Devices XL-10 User's Guide

XL-10
Multi-Pin Breakout Cable for 442 Mixer
The XL-10 multi-pin breakout cable provides quick, convienent access to the 442 mixer’s multi­pin audio connector. The XL-10 extends the mix­ers multi-pin connection and provides separate, balanced XLR outputs (left and right) plus the
The XL-10 consists of two pieces, the breakout segment and the Hirose-to-Hirose extension cable. The breakout segment can be used independent of the extension segment for applications where
short cable runs are feasible. Return-A send to the 442. It can be used with cameras or recorders to provide a single cable car­rying multiple signals.
s
i
o
n
n
e
t
x
e
n
i
p
-
i
t
l
u
m
c
a
b
l
e
breakout cable
to 442 multi-pin connector
Operational Notes
• The XL-10 can be used with and without the extension cable.
• Additional microphone cable can be connected to the indi­vidual XLR connectors on the breakout cable. Use high-qual­ity microphone cable when extending the XLR lengths.
• The Return-A segment is unbalanced.
• Additional length segments of extension cable can be added for long cable runs (contact Sound Devices for extension cable suppliers).
Connectors:
XLR Outputs: Neutrik XLR-M, pin-2 (+), pin-3 (-), pin-1 (ground)
Return A:
Length:
Specifications
Cable Type: Belden 1904A
Hirose 10-pin male (2), Hirose 10-pin female (1), Neutrik XLR-M (2), 3.5 mm TRS right-angle (1)
3.5 mm, unbalanced, tip-left, ring-right, sleeve- ground
XLR breakout - 61 cm, 24 inch (3.5 mm 66 cm, 26 inch) extension - 610 cm, 20 ft
Return A to camera/recorder output, head­phone output, TRS stereo
XLR Out (L)
from 442, balanced, output level set on output panel switch
XLR Out (R)
from 442, balanced, output level set on output panel switch
442 Multi-Pin
Outputs
9
8
7
6
5
1 . . . . .L (+) output
2 . . . . .L (–) output
3 . . . . .R (+) output
4 . . . . .R (–) output
5 . . . . .R (+) return A
6 . . . . .n/c
7 . . . . .L (+) return A
8 . . . . .n/c
9 . . . . .ground
10 . . . .ground
1
2
3
4
10
SOUND DEVICES, LLC
300 Wengel Drive • Reedsburg, WI 53959 • USA • phone: (608) 524-0625 • fax: (608) 524-0655 • www.sounddevices.com
© 2004 Sound Devices, LLC
Loading...