SoundCraft COMPACT 4, COMPACT 10, COMPACT 4 RW5677, COMPACT 10 RW5678 User Manual

1

USER GUIDEUSER GUIDE

USER GUIDE

PagePage

Page

Safety Symbol GuideSafety Symbol Guide

Safety Symbol Guide

22

2

Approvals and NoticeApprovals and Notice

Approvals and Notice

33

3

WarrantyWarranty

Warranty

44

4

ImporImpor

Impor

tant Safety Instrtant Safety Instr

tant Safety Instr

uctionsuctions

uctions

55

5

CautionsCautions

Cautions

55

5

WarningsWarnings

Warnings

66

6

InstallationInstallation

Installation

77

7

PrecautionsPrecautions

Precautions

88

8

WW

W

ARRANTY AND SAFETY GUIDEARRANTY AND SAFETY GUIDE

ARRANTY AND SAFETY GUIDE

2

USER GUIDEUSER GUIDE

USER GUIDE

SAFETY SYMBOL GUIDESAFETY SYMBOL GUIDE

SAFETY SYMBOL GUIDE

For your own safety and to avoid invalidation of the warranty all text marked with these symbols should be read carefully.

CAUTIONS

The lightning flash with square symbol, is intended to

alert the user to the presence of un-insulated “dangerous

voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock

to persons.

WARNINGS

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

NOTES

Contain important information and useful tips on the operation

of your equipment.

HEADPHONES SAFETY WARNING

Contain important information and useful tips on

headphone outputs and monitoring levels.

3

USER GUIDEUSER GUIDE

USER GUIDE

IMPORTANT

Please read this manual carefully before connecting your mixer

to the mains for the first time.

Parts of the design of this product may be protected by worldwide patents.

Part No. ZM0293-03 Issue:1.5

Soundcraft is a trading division of Harman International Industries Ltd. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Soundcraft shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of Soundcraft.

Harman International Industries Limited Cranborne House Cranborne Road POTTERS BAR Hertfordshire EN6 3JN UK

Tel: +44 (0)1707 665000 Fax: +44 (0)1707 660742 http://www.soundcraft.com

4

USER GUIDEUSER GUIDE

USER GUIDE

WW

W

ARRANTYARRANTY

ARRANTY

1 Soundcraft is a trading division of Harman International Industries Ltd.

End User means the person who first puts the equipment into regular operation.

Dealer means the person other than Soundcraft (if any) from whom the End User purchased the Equipment, provided such a person is authorised for this purpose by Soundcraft or its accredited Distributor. Equipment means the equipment supplied with this manual.

2 If within the period of twelve months from the date of delivery of the Equipment to the End User

it shall prove defective by reason only of faulty materials and/or workmanship to such an extent that the effectiveness and/or usability thereof is materially affected the Equipment or the defective component should be returned to the Dealer or to Soundcraft and subject to the following conditions the Dealer or Soundcraft will repair or replace the defective components. Any components replaced will become the property of Soundcraft.

3 Any Equipment or component returned will be at the risk of the End User whilst in transit (both to

and from the Dealer or Soundcraft) and postage must be prepaid.

4 This warranty shall only be valid if:

a) The Equipment has been properly installed in accordance with instructions contained

in Soundcraft’s manual; and

b) The End User has notified Soundcraft or the Dealer within 14 days of the defect

appearing; and

c) No persons other than authorised representatives of Soundcraft or the Dealer have

effected any replacement of parts maintenance adjustments or repairs to the Equipment; and

d) The End User has used the Equipment only for such purposes as Soundcraft

recommends, with only such operating supplies as meet Soundcraft’s specifications and otherwise in all respects in accordance with Soundcraft’s recommendations.

5 Defects arising as a result of the following are not covered by this Warranty: faulty or negligent

handling, chemical or electro-chemical or electrical influences, accidental damage, Acts of God, neglect, deficiency in electrical power, air-conditioning or humidity control.

6 The benefit of this Warranty may not be assigned by the End User.

7 End Users who are consumers should note their rights under this Warranty are in addition to and

do not affect any other rights to which they may be entitled against the seller of the Equipment.

5

USER GUIDEUSER GUIDE

USER GUIDE

IMPORIMPOR

IMPOR

TT

T

ANT SAFETY INSTRUCTIONSANT SAFETY INSTRUCTIONS

ANT SAFETY INSTRUCTIONS

CAUTIONS

• Use only the AC adaptor supplied:

UK HB10064 KR HB10067 (C4 ONLY) EU HB10065 AZ HB10068 (C4 ONLY) US HB10066 JP HB10069 (C4 ONLY)

Mains voltage selection This setting is not adjustable. The AC adaptors are capable of operating at either 230V AC or 115V AC +/- 10%. Check the voltage rating of the AC adaptor before plugging in.

Do not use the AC adaptor for any other purpose. Replace the complete AC adaptor if the plug, lead or adaptor is damaged. Refer to the Soundcraft dealer from where the equipment was purchased.

The wires in the mains lead are coloured in accordance with the following code:

UK & EUUK & EU

UK & EU

US & CANUS & CAN

US & CAN

Neutral:Neutral:

Neutral: Blue White Live:Live:

Live:Live:

Live: Brown Black

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured Blue or White must be connected to the terminal in the plug which is marked with the letter N.

The wire which is coloured Brown or Black must be connected to the terminal in the plug which is marked with the letter L.

Ensure that these colour codings are followed carefully in the event of the plug being changed.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.

This Class A digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la Classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

6

USER GUIDEUSER GUIDE

USER GUIDE

WW

W

ARNINGSARNINGS

ARNINGS

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• This unit contains no user serviceable parts. Refer all servicing to a qualified service engineer,

through the appropriate Soundcraft dealer.

• Clean the apparatus only with a dry cloth.

• Do not install near any heat sources such as radiators, heat resistors, stoves, or other apparatus

(including amplifiers) that produce heat.

• Do not use this apparatus near water. The apparatus must not be exposed to dripping or splashing.

Objects containing liquid must not be placed on the apparatus.

• The disconnect device is the mains plug; it must remain accessible so as to be readily operable

in use.

• Do not defeat the safety purpose of the polarized or grounding type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles

and the point where they exit from the apparatus.

• Only use cables and hardware specified by the manufacturer.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

• It is recommended that all maintenance and service on the product should be carried out by

Soundcraft or its authorised agents. Soundcraft cannot accept any liability whatsoever for any loss or damage caused by service, maintenance or repair by unauthorised personnel.

• If a trolley is used to carry multiple , use caution when moving the trolley / apparatus combination

to avoid injury from tip-over.

7

USER GUIDEUSER GUIDE

USER GUIDE

INSTINST

INST

ALLAALLA

ALLA

TIONTION

TION

ABOUT THIS MANUAL

This manual describes the safety precautions, warnings, specifications, installation and operating procedures specific to the following Soundcraft products only:

Soundcraft COMPACT4 RW5677 UK / EU / US / KR / AZ / JP Soundcraft COMPACT10 RW5678 UK / EU / US / KR / AZ / JP

The information in this manual should be read by end users of one of the above products only. In particular, this manual should not be read in conjunction with any other product not listed above.

The above products do not contain any user-serviceable parts and the user guide does not contain any technical servicing information. Qualified service personnel can obtain a separate Technical Manual incorporating the user guide, Part No ZM0293-01 from Soundcraft or one of its accredited distributors.

Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Soundcraft shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual.

INSTALLING THE MIXER

Correct connection and positioning of your mixer is important for successful and trouble-free operation. The following sections are intended to give guidance with cabling, connections and configuration of your mixer.

• Choose the mains supply for the sound system with care, and do not share sockets or

earthing with lighting dimmers.

• Position the mixer where the sound can be heard clearly.

• Run audio cables separately from dimmer wiring, using balanced lines wherever possible.

If necessary, cross audio and lighting cables at right angles to minimise the possibility of interference. Keep unbalanced cabling as short as possible.

• Check your cables regularly and label each end for easy identification.

8

USER GUIDEUSER GUIDE

USER GUIDE

GENERAL PRECAUTIONS

Avoid storing or using the mixer in conditions of excessive heat or cold, or in positions where it is likely to be subject to vibration, dust or moisture.

Keep the mixer clean using a soft dry brush, and an occasional wipe with a dry cloth. Do not use any other solvents which may cause damage to paint or plastic parts.

Avoid placing drinks or smoking materials on or near the mixer. Sticky drinks and cigarette ash are frequent causes of damage to connectors, rotary controls and switches.

Regular care and inspection will be rewarded by a long life and maximum reliability.

PRECAUTIONSPRECAUTIONS

PRECAUTIONS

SAFETY PRECAUTIONS

For your own safety and to avoid invalidation of the warranty please read this section carefully.

In particular, you should also read the Cautions and Warnings on pages 5-6 of this manual.

When using mains power, the console must only be

connected to the Mains Voltage indicated on the power

supply.

9

USER GUIDEUSER GUIDE

USER GUIDE

PagePage

Page

Compact User InterCompact User Inter

Compact User Inter

faceface

face

1010

10

The 10 Second TThe 10 Second T

The 10 Second T

utorutor

utor

1111

11

IntroductionIntroduction

Introduction

1212

12

Working Safely with SoundWorking Safely with Sound

Working Safely with Sound

1313

13

The Mixer ExplainedThe Mixer Explained

The Mixer Explained

14-1514-15

14-15

Mixing Audio PathMixing Audio Path

Mixing Audio Path

1616

16

Monitoring Audio PathMonitoring Audio Path

Monitoring Audio Path

1717

17

Wiring UpWiring Up

Wiring Up

18-2018-20

18-20

Problem SolvingProblem Solving

Problem Solving

21

2121

21

Mono Input ChannelsMono Input Channels

Mono Input Channels

22-2422-24

22-24

Stereo Input ChannelsStereo Input Channels

Stereo Input Channels

2525

25

Master SectionMaster Section

Master Section

26-2826-28

26-28

Using YUsing Y

Using Y

our Compact4/10 Consoleour Compact4/10 Console

our Compact4/10 Console

2929

29

Monitoring TipsMonitoring Tips

Monitoring Tips

2929

29

Channel Set-UpChannel Set-Up

Channel Set-Up

3030

30

Operational NotesOperational Notes

Operational Notes

3131

31

Application 1 : Computer Based RecordingApplication 1 : Computer Based Recording

Application 1 : Computer Based Recording

3232

32

Application 2 : Live perApplication 2 : Live per

Application 2 : Live per

forfor

for

mance Mixingmance Mixing

mance Mixing

3333

33

Application 3 : DJ PerApplication 3 : DJ Per

Application 3 : DJ Per

forfor

for

mance Mixingmance Mixing

mance Mixing

3232

32

Application 4 : Electronic News GatheringApplication 4 : Electronic News Gathering

Application 4 : Electronic News Gathering

3333

33

Application 5 ; Broadcast StudioApplication 5 ; Broadcast Studio

Application 5 ; Broadcast Studio

3434

34

Application 6 : House of WorshipApplication 6 : House of Worship

Application 6 : House of Worship

3434

34

FurFur

Fur

ther Inforther Infor

ther Infor

mationmation

mation

3535

35

GlossarGlossar

Glossar

y of Ty of T

y of T

erer

er

ms usedms used

ms used

3636

36

Typical SpecificationsTypical Specifications

Typical Specifications

3737

37

Compact 4 DimensionsCompact 4 Dimensions

Compact 4 Dimensions

3838

38

Compact 10 DimensionsCompact 10 Dimensions

Compact 10 Dimensions

3939

39

Typical Connecting LeadsTypical Connecting Leads

Typical Connecting Leads

40-4140-41

40-41

System Block DiagramSystem Block Diagram

System Block Diagram

4242

42

Gain StrGain Str

Gain Str

uctuructur

uctur

e Diagrame Diagram

e Diagram

4343

43

Compact 4 Mark-Up SheetCompact 4 Mark-Up Sheet

Compact 4 Mark-Up Sheet

4444

44

Compact 10 Mark-Up SheetCompact 10 Mark-Up Sheet

Compact 10 Mark-Up Sheet

4545

45

CONTENTSCONTENTS

CONTENTS

10

USER GUIDEUSER GUIDE

USER GUIDE

COMPCOMP

COMP

ACT USER INTERFACT USER INTERF

ACT USER INTERF

ACEACE

ACE

To get you working as fast as possible, this manual begins with a 10 second tutorial. Here you can find quick information on any feature of the console, and a page reference where you can find a more detailed explanation. Just pick out the feature you need more information on, find the associated number and read the brief explanation on the opposite page. More detail can be found by delving deeper into the user guide.

Owners of Compact10 consoles will notice additonal jack inputs on Stereo Channels 1-4, these can be used for line level inputs from synthesisers, samplers, drum machines etc.

NOTE: ALL SETTINGS ARE SHOWN IN THEIR DEFAULT POSITION - I.E. THE MOST COMMON SETTINGS TO BEGIN A SESSION

1

t

2

3 4

5

6

7

8

9

p

y

d

0

q

ui

g

h

f

s

e

w

o

ar

j k

l

;

z

x c

v

b

n

m

11

USER GUIDEUSER GUIDE

USER GUIDE

THE 10 SECOND TUTOR - COMPTHE 10 SECOND TUTOR - COMP

THE 10 SECOND TUTOR - COMP

ACT4 / COMPACT4 / COMP

ACT4 / COMP

ACT 10ACT 10

ACT 10

1

MIC INPUTMIC INPUT

MIC INPUT Connect Microphones here - read phantom power notes before use (pg 22)

2

LINE INPUTLINE INPUT

LINE INPUT Connect Line level sources here, e.g. Synth, Drum Machine, etc (pg 22)

3

HIGH PASS FILTER HIGH PASS FILTER

HIGH PASS FILTER This is used to remove very low frequencies i.e. mic “popping” (pg 22)

4

INSERT POINTINSERT POINT

INSERT POINT Connect Signal processors here, e.g. Compressor, Gate etc (pg 23)

5

GAIN CONTROL GAIN CONTROL

GAIN CONTROL Adjust this to increase or decrease the level of the incoming signal (pg 23)

678

EQ STAGEEQ STAGE

EQ STAGE Adjust these controls to change the signal tone (the character of the signal) (pg 23)

9

PAN CONTROL PAN CONTROL

PAN CONTROL Use this control to position the signal within the stereo field (pg 24)

0

INPUT CHANNEL LEVEL INPUT CHANNEL LEVEL

INPUT CHANNEL LEVEL This is used to control the level fed to the Mix Bus (pg 24)

q

REC(ORD) SWITCHREC(ORD) SWITCH

REC(ORD) SWITCH This sends the channel being recorded to the record outputs, or the Mix Bus (pg 24)

w

MONITOR SWITCH MONITOR SWITCH

MONITOR SWITCH Press this to listen to the associated signal (pg 24)

e

PHANTOM POWER PHANTOM POWER

PHANTOM POWER Switches on the phantom power (48V) for condenser microphones (pg 22)

WARNING:WARNING:

WARNING: Do Not apply Phantom Power before connecting a microphone

r

D.I. SWITCH D.I. SWITCH

D.I. SWITCH Direct Injection - Press this to get a better signal match when a bass guitar is used (pg 23)

t

R.I.A.A. SWITCH R.I.A.A. SWITCH

R.I.A.A. SWITCH Vinyl Record Deck Compensation - Use only when decks are connected (pg 25)

y

STEREO INPUTS STEREO INPUTS

STEREO INPUTS These two inputs take audio from keyboards, sound modules, samplers etc (pg 25)

ui

PLAYBACK INPUTS PLAYBACK INPUTS

PLAYBACK INPUTS Here you can connect the playback from your soundcard or recording device (pg 28)

op

RECORD OUTPUTSRECORD OUTPUTS

RECORD OUTPUTS To connect the output from the mixer to your soundcard (or recording device) input (pg 28)

a

MONITOR OUTPUTS MONITOR OUTPUTS

MONITOR OUTPUTS These are used to feed your speakers / amp, or monitoring system (pg 26)

s

MIX OUTPUTS MIX OUTPUTS

MIX OUTPUTS Connect these to your recording device, or to your amplification system when using as a

standard mixer, not when using with a computer based system (pg 26)

d

MONITOR LEVELMONITOR LEVEL

MONITOR LEVEL Used to adjust the level sent to your speakers / amp, or monitoring system (pg 26)

f

MIX LEVELMIX LEVEL

MIX LEVEL Used to adjust the level sent from the mix outputs (pg 26)

g

MONO (CHK) SWITCH MONO (CHK) SWITCH

MONO (CHK) SWITCH Use this to hear and check to your mix in mono (pg 26)

h

MONITOR MIX MONITOR MIX

MONITOR MIX Use this to listen to the mix outputs (pg 26)

j

RECORD LEVELRECORD LEVEL

RECORD LEVEL Used to adjust the level sent to your soundcard or recording device (pg 28)

k

PLAYBACK LEVELPLAYBACK LEVEL

PLAYBACK LEVEL Used to adjust the level coming from your soundcard or recording device (pg 28)

l

MAIN METERS MAIN METERS

MAIN METERS These show the level of the signal being monitored (pg 26)

;

MONITOR PLAYBACK MONITOR PLAYBACK

MONITOR PLAYBACK Use this to listen to the playback signal from your soundcard (pg 28)

z

POWER / LOW BAT. POWER / LOW BAT.

POWER / LOW BAT. Indicators for DC power from the adapter, or the battery pack (pg 26)

x

ARTIST MIX ARTIST MIX

ARTIST MIX This lets the artist choose the amount of playback signal required (pg 27)

c

ARTIST LEVEL ARTIST LEVEL

ARTIST LEVEL This controls the level of the signal sent to the artist’s headphones (pg 27)

v

ARTIST HEADPHONES ARTIST HEADPHONES

ARTIST HEADPHONES The artist should plug headphones in here for personal monitoring (pg 27)

b

ENGINEER LEVEL ENGINEER LEVEL

ENGINEER LEVEL This controls the level of the signal sent to the engineer’s headphones (pg 27)

n

ENGINEER HEADPHONESENGINEER HEADPHONES

ENGINEER HEADPHONES The engineer should plug headphones in here for standard monitoring (pg 27)

m

MONITORS/ARTIST MIXMONITORS/ARTIST MIX

MONITORS/ARTIST MIX The engineer, using headphones can listen to the monitor signal or the artist mix (pg 27)

12

USER GUIDEUSER GUIDE

USER GUIDE

INTRODUCTIONINTRODUCTION

INTRODUCTION

Thank you for purchasing a Soundcraft mixer. We take great pride in our latest addition to our range of mixing consoles - you have taken a step in the right direction and we will be with you all the way.

Owning a Soundcraft console brings you the expertise and support of one of the industry’s leading manufacturers, and the results of over three decades of supporting some of the biggest names in the business. Our knowledge has been attained through working in close contact with leading professionals and institutes to bring you products designed to get the best possible results from your mixing.

Built to the highest standards using quality components and surface mount technology, the Compact4 and Compact10 consoles are designed to be as easy to use as possible. We have spent years researching the most efficient methods of control for two key reasons:

1) Engineers, musicians, writers and programmers all need to have very few interruptions to the creative process; our products have been designed to be almost transparent, allowing this process to breathe.

2) Whether performing or recording, time is a very expensive and rare commodity. Our products have a user interface which is recognised by millions to be the industry standard because of its efficiency.

The sonic qualities of our products are exemplary - some of the same circuits which are used on our most expensive consoles are employed in the Compact4, bringing you the great Soundcraft quality in a small format console without compromise.

You will also be glad to know you have a one year warranty with your product from the date of purchase. The Compact4 and Compact10 consoles have been designed using the latest high-end software based engineering packages. Every console from Soundcraft has been proven to stand up to all the stress and rigours of modern day mixing environments.

The Compact4 and Compact10 consoles are manufactured using some of the most advanced techniques in the world, from high density surface mount PCB technology, to computer aided test equipment able to measure signals well outside the range of normal hearing.

As each console passes through to the quality checking stage (just before packing), there is also a human listening station. Something we have learnt over the years is that the human touch counts

- and only by using people can you ensure the product meets the high demands of the user.

NOTE : The packaging which your Soundcraft Compact4 or Compact10 arrived in forms part of the product, and must be retained for future use.

13

USER GUIDEUSER GUIDE

USER GUIDE

WORKING SAFELWORKING SAFEL

WORKING SAFEL

Y WITH SOUNDY WITH SOUND

Y WITH SOUND

Although your new console will not make any noise until you feed it signals, it has the capability to produce sounds which when monitored through an amplifier or headphones can damage hearing over time.

The table below is taken from the Occupational Safety & Health Administration directive on Occupational noise exposure (1926.52):

PERMISSABLE NOISE EXPOSUREPERMISSABLE NOISE EXPOSURE

PERMISSABLE NOISE EXPOSURE

DURATION PER DAY, HOURS SOUND LEVEL dBA SLOW RESPONSE

890 692 495 397 2 100

1.5 102 1 105

0.5 110 <0.25 115

Conforming to this directive will minimise the risk of hearing damage caused by long listening periods. A simple rule to follow is the longer you listen the lower the average volume should be.

Please take care when working with your audio - if you are manipulating controls which you don’t understand (which we all do when we are learning), make sure your monitors are turned down. Remember that your ears are the most important tool of your trade, look after them, and they will look after you.

Most importantly - don’t be afraid to experiment to find out how each parameter affects the sound

- this will extend your creativity and help you to get the best results.

14

USER GUIDEUSER GUIDE

USER GUIDE

THE MIXER EXPLAINEDTHE MIXER EXPLAINED

THE MIXER EXPLAINED

What is an audio mixer ?What is an audio mixer ?

What is an audio mixer ?

The term “mixing” is the combining of audio channels, in most cases to form a stereo output signal made up of left and right channels. Mixers normally have level controls (or faders) on each input to set the required amount of audio before the mixing stage

What other functions can a Compact mixer perform ?What other functions can a Compact mixer perform ?

What other functions can a Compact mixer perform ?

The Compact4 and Compact10 consoles can also be used to process audio. You can:

a) Apply Equalisation ( change the tone of the audio ). This is done using the EQ controls for the low, mid and high bands.

b) Place an audio processor over a particular signal, this is achieved using the insert point to peform additional processing such as compression, or adding fx such as reverb.

c) Control the audio position within the stereo field (the sound stage created by your speakers/monitors).

d) Increase or decrease the incoming signal level in order to achieve the best signal to noise ratio (audio quality). This parameter is known as “gain”.

The Compact4 and Compact10 consoles can also be used to route audio, you can:

a) Send audio to record outputs, normally fed to your recording system. The source can be unbalanced for use with consumer soundcards, or balanced for professional soundcards.

b) Send audio to the mix output, used to feed a PA when performing.

The term “monitoring” can be more simply described as listening to audio channels. Mixers normally have monitor switches in various parts of the mixing process to check channels, before and after mixing.

The Compact4 and Compact10 consoles can also be used to monitor (using ears and eyes) audio. You can:

a) Send audio to the LED meters and the monitor outputs simultaneously. You always see what you hear from your monitor outputs which will feed the speakers in your main listening position.

b) Send audio to the artist headphone output, used to allow the artist to independently control their own personal mix without affecting any other outputs

15

USER GUIDEUSER GUIDE

USER GUIDE

What kind of things can I plug into it ?What kind of things can I plug into it ?

What kind of things can I plug into it ?

We can’t possibly list all of them here, but below are a few of the most common sources:

a) Microphones, both dynamic and condensor types can be used. Channel One also has a high-pass filter which removes the sub bass frequencies when singing “b” and “p” sounds.

b) Guitars, there is even a DI circuit to enhance bass guitars, which is located on a mono channel

c) Synths/Keyboards, line level stereo outputs can be fed to the stereo input channels.

d) Decks, or turntables if you’re that way inclined, can be fed to stereo inputs with RIAA Equalisation. The RIAA Equalisation returns the tone of the deck input to that of the original signal (as RIAA-EQ is applied when cutting vinyl).

e) Computer, both Mac and PC systems have a host audio card, often found on the motherboard. The unbalanced connection from the host (or consumer soundcard) can be connected to the phono playback inputs.

f) Professional Soundcards, or Digital Audio Workstations can be connected to the 3-pole ‘A’ gauge balanced jack playback inputs.

g) CDR/DAT/MD/MP3 - the outputs of these consumer, or professional devices can be connected to the unbalanced phono inputs, or the 3-pole ‘A’ gauge balanced jack stereo inputs (Compact10 only).

h) Another mixer, often called a sub-mixer will be used to mix a drum kit, or an orchestral outfit. The outputs of this mixer can be connected to the unbalanced phono inputs, or the 3-pole ‘A’ gauge balanced jack stereo inputs (Compact10 only).

Wow that’s a lot of stuff for such a small mixer ?Wow that’s a lot of stuff for such a small mixer ?

Wow that’s a lot of stuff for such a small mixer ?

Yes it is, you should be happy, you made a good choice.

Why don’t other manufacturers design consoles like this ?Why don’t other manufacturers design consoles like this ?

Why don’t other manufacturers design consoles like this ?

a) Because they are out of touch ?

b) Because they are not very innovative ?

c) Because they don’t have the experience ?

d) Because they don’t listen to their users ?

Who knows :-)

SoundCraft COMPACT 4, COMPACT 10, COMPACT 4 RW5677, COMPACT 10 RW5678 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual