Page 1
The XC-E Series are compact, light-weight one-piece black and white
cameras incorporating the latest 1/2 and 1/3 type Interline (IT) CCD
which produces new levels of picture detail. With dimensions of
29 x 29 x 30 mm*, these cameras can easily be installed in places
where installation was previously difficult for other larger cameras.
The XC-E Series offer three different model ranges that only differ in
spectral sensitivity as to suit various application environments. The
XC-ES Series (XC-ES50/ES50CE, XC-ES50L/ES50LCE,
XC-ES51/ES51CE and XC-ES30/ES30CE) are standard models for
general use under visible light conditions. The XC-EI Series
(XC-EI50/EI50CE and XC-EI30/EI30CE) offer excellent near-infrared
sensitivity. Under low light conditions or when used with IR LED
illumination systems, these cameras provide clear images. The XC-EU
Series (XC-EU50/EU50CE) offer near-ultraviolet sensitivity in the i-line,
or 365 nm, range. The short wavelength allows the XC-EU Series to
capture very fine detail. All models have identical dimensions and
controls, making them easy to interchange. A variety of settings are
available for differing subject and lighting conditions. All camera
control switches are accessible from the outside of the camera.
Excellent vibration and shock characteristics make these cameras
ideal for demanding machine vision applications.
* The XC-ES50L/ES50LCE, which are L-type versions of the XC-ES50/
ES50CE, measure 29 (W) x 42.5 (H) x 43.8 (D) mm.
B/W Video Camera Module
XC-E Series
www.sonybiz.net/vision
Features
XC-ES50/ES50CE/ES50L/ES50LCE/ES51/ES51CE/
EI50/EI50CE/EU50/EU50CE: 1/2 type IT CCD
XC-ES30/ES30CE/EI30/EI30CE: 1/3 type IT CCD
Compact and light weight: 29 (W) x 29 (H) x 30 (D) mm,
50 g except for XC-ES50L/ES50LCE:
29 (W) x 42.5 (H) x 43.8 (D) mm, 110 g
Near-infrared sensitivity: XC-EI50/EI50CE,
XC-EI30/EI30CE
Near-ultraviolet sensitivity: XC-EU50/EU50CE
Minimum illumination at F1.4:
0.3 lx: XC-ES50/ES50CE/ES30/ES30CE
3.0 lx: XC-ES50L/ES50LCE
0.1 lx: XC-EI50/EI50CE
0.2 lx: XC-ES51/ES51CE/EI30/EI30CE
High S/N Ratio: 60 dB
Electronic shutter function:
1/100 to 1/10,000 s: EIA, 1/120 to 1/10,000 s: CCIR
Flexible trigger shutter function
Scanning system: 2:1 interlaced
Frame/field exposure
Restart/reset function
Synchronization: internal/external (HD/VD)
High shock and vibration tolerance
Lead-free products
Page 2
XC-E Series
Applicable wavelength range Applicable wavelength range
Standard model
XC-ES50/ES50CE
XC-ES50L/ES50LCE
XC-ES51/ES51CE
XC-ES30/ES30CE
Near IR model
XC-EI50/EI50CE
XC-EI30/EI30CE
Accessories
400-770 nm 400-770 nm
300 400 700 800 900 300 400 700 800 900
UV model
XC-EU50/EU50CE
300-420 nm
300 400 700 800 900
Applicable wavelength range
Spectral response
300 400
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
500 600 700 800 900 1000
Wavelength (nm)
XC-ES/ST Series
XC-EI Series
XC-EU Series
Standard CCD with IR Cut Filters
Note following differences between models:
• XC-EI models are more sensitive than XC-ES models, not only in near-IR range but in visible range as well.
• XC-ES51/ES51CE has an improved sensitivity over XC-ES50/ES50CE.
• XC-EU models are only sensitive in near-UV range and are not susceptable to disturbance from surrounding
visible light.
• XC-ES50L/ES50LCE include an IR Cut Filter.
Compact camera adaptor
DC-700/700CE
• Compact, lightweight (700 g, 1 lb 8 oz)
• External sync IN/OUT
• Trigger input / WEN output
• New EIAJ standard 12 pin connector
• Dimensions: 110 (W) x 53 (H) x 160 (D) mm
(4
3
⁄8 x 2 1⁄2 x 6 3⁄8 inches)
12 pin camera cable (CE standard)
• CCXC-12P02N (2 m)
• CCXC-12P05N (5 m)
• CCXC-12P10N (10 m)
• CCXC-12P25N (25 m)
Tripod adaptor
VCT-333I
• ABS
• Approx. 6.1 g (0.2 oz)
• Dimensions: 18 (W) x 6 (H) x 27 (D) mm
(2
2
⁄32 x 1⁄4 x 1⁄8 inches)
The XC-EU50/EU50CE models are compact and light-weight
cameras that have near-ultraviolet sensitivity in the i-line, or 365 nm,
range. Examples of typical application areas are PCB and solder
inspection, document proofing, microscopy, medical and
cosmetics applications. Using UV lighting, the short wavelength
allows the XC-EU50/EU50CE models to capture clearly very fine
detail and surface structures, which cannot be detected using
visible or IR lighting, including very small scratches, dust or
blemishes, as well as special fluorescent materials.
Page 3
XC-E Series Specifications
XC-ES50 XC-ES50L XC-ES51 XC-ES30 XC-EI50 XC-EI30 XC-EU50
Image device 1/2 type IT CCD 1/3 type IT CCD 1/2 type IT CCD 1/3 type IT CCD 1/2 type IT CCD
Effective picture elements 768 (H) x 494 (V)
Signal system EIA (standard)
Horizontal frequency 15.734 kHz
Vertical frequency 59.94 Hz
Cell size (µm) 8.4 x 9.8 6.35 x 7.4 8.4 x 9.8 6.35 x 7.4 8.4 x 9.8
Lens mount C mount
Flange back 17.526 mm
Sync system Internal/External (auto)
External sync system HD/VD (2 to 5 Vp-p)
External sync frequency ± 1 %
Jitter Less than ± 50 nsec
Scanning system 2:1 Interlaced
Video output 1.0 Vp-p, negative, 75 Ω unbalanced
Horizontal resolution 570 TV lines
Sensitivity
(Gamma ON, MIN GAIN, 400 lx F5.6 400 lx F4 400 lx F8 400 lx F4 400 lx F11 400 lx F8 –
No IR cut filter)
Minimum illumination* 0.3 lx 3.0 lx 0.2 lx 0.3 lx 0.1 lx 0.2 lx –
S/N ratio 60 dB
Gain AGC/Manual selectable
Gamma ON/OFF selectable
Normal shutter 1/100 to 1/10,000 s
External trigger shutter** 1/4 to 1/10,000 s
Power requirements DC 12 V (+9 to +16 V)
Power consumtion 1.6 W 1.4 W 1.6 W 1.4 W 1.6 W
Dimension (W) x (H) x (D) 29 x 29 x 30 mm 29 x 42.5 x 43.8 mm 29 x 29 x 30 m m
Mass 50 g (2 oz) 110 g (4 oz) 50 g (2 oz)
Operating temperature -5 to +45 °C (23 to 104 °F)
Operating humidity 20 to 80 %
Storage temperature -30 to +60 °C (-22 to +140 °F)
Storage humidity 20 to 95 %
Vibration resistance 10 G (20 to 200 Hz)
Shock resistance 70 G
MTBF 126,000 hrs.
Regulatory compliance UL1492, FCC Class B Digital Device, CE (EN61326/97 + A1/98), AS4251.1 + AS4252.2
Supplied accessories Lens mount cap (1), Operating instructions (1)
* (F1.4, AGC ON, without IR cut filter) ** Using Dip switch on the rear panel or Using trigger pulse width
XC-ES50CE XC-ES50LCE XC-ES51CE XC-ES30CE XC-EI50CE XC-EI30CE XC-EU50CE
Image device 1/2 type IT CCD 1/3 type IT CCD 1/2 type IT CCD 1/3 type IT CCD 1/2 type IT CCD
Effective picture elements 752 (H) x 582 (V)
Signal system CCIR (standard)
Horizontal frequency 15.625 kHz
Vertical frequency 50 Hz
Cell size (µm) 8.6 x 8.3 6.5 x 6.25 8.6 x 8.3 6.5 x 6.25 8.6 x 8.3
Lens mount C mount
Flange back 17.526 mm
Sync system Internal/External (auto)
External sync system HD/VD (2 to 5 Vp-p)
External sync frequency ± 1 %
Jitter Less than ± 50 nsec
Scanning system 2:1 Interlaced
Video output 1.0 Vp-p, negative, 75 Ω unbalanced
Horizontal resolution 560 TV lines
Sensitivity
(Gamma ON, MIN GAIN, 400 lx F5.6 400 lx F4 400 lx F8 400 lx F4 400 lx F11 400 lx F8 –
No IR cut filter)
Minimum illumination* 0.3 lx 3.0 lx 0.2 lx 0.3 lx 0.1 lx 0.2 lx –
S/N ratio 60 dB
Gain AGC/Manual selectable
Gamma ON/OFF selectable
Normal shutter 1/120 to 1/10,000 s
External trigger shutter** 1/4 to 1/8,000 s
Power requirements DC 12 V (+9 to +16 V)
Power consumtion 1.6 W 1.4 W 1.6 W 1.4 W 1.6 W
Dimension (W) x (H) x (D) 29 x 29 x 30 mm 29 x 42.5 x 43.8 mm 29 x 29 x 30 mm
Mass 50 g (2 oz) 110 g (4 oz) 50 g (2 oz)
Operating temperature -5 to +45 °C (23 to 104 °F)
Operating humidity 20 to 80 %
Storage temperature -30 to +60 °C (-22 to +140 °F)
Storage humidity 20 to 95 %
Vibration resistance 10 G (20 to 200 Hz)
Shock resistance 70 G
MTBF 126,000 hrs.
Regulatory compliance UL1492, FCC Class B Digital Device, CE (EN61326/97 + A1/98), AS4251.1 + AS4252.2
Supplied accessories Lens mount cap (1), Operating instructions (1)
* (F1.4, AGC ON, without IR cut filter) ** Using Dip switch on the rear panel or Using trigger pulse width
Page 4
www.sonybiz.net/frenchfries
© La tre klara radioj saltas. Nau pura kalkuliloj skribas kvin belega bieroj, sed ses stulta arboj helfis tri malklara radioj, kaj ses
domoj kuris, sed tri cxambroj parolis, kaj ses klara hundoj batos du bona tratoj, sed Denvero vere forte helfis ses cxambroj.
La biero falis, kaj kvin klara sxipoj mangxas ses birdoj. Du telefonoj havas tri alrapida kalkuliloj. Ses hundoj acxetis Kolorado,
sed tri tratoj tre bone batos kvin pura birdoj. Kvar tratoj pripensis Londono.
www.sonybiz.net/vision
XC-E Series
© 2005 Sony Europe, a division of Sony UK Ltd. Sony is a registered trademark of Sony Corporation, Japan. All rights reserved. Reproduction in whole or in
part without permission is prohibited. Design and specifications are subject to change without notice. All non-metric weights and measures are approximate.
CA XC-E Series/GB- / /2005
LO-77ERK
Extension rings kit
Tripod adaptor
VCT-333I
CCXC-12P02N
Camera cable
C-mount lens
AC
VIDEO OUT
HD/VD
TRIG
WEN
Camera adaptor
DC-700/700CE
(New EIAJ standard 12 pin connector)
CCXC-12P05N
CCXC-12P10N
CCXC-12P25N
XC-ES50/ES50CE
XC-ES50L/ES50LCE*
2
*1 Only VCL-50Y-M is applicable to the XC-EU50/EU50CE.
*2 The XC-ES50L/ES50LCE cannot be attached to the VCT-333I.
*3 HD/VD is not available at C.SYNC.
XC-ES30/ES30CE
XC-EI50/EI50CE
XC-EI30/EI30CE
XC-EU50/EU50CE
VCL-08YM
VCL-12YM
VCL-16Y-M
VCL-25Y-M
VCL-50Y-M
Connection Diagram
Dimensions & Rear Panel Factory setting mode of rear panel
Unit: mm
29
29
29
12
6.5
22
29
10
30
6.5 5.5
16
+-0.2
12 +
-
0.1
52.5 +
-
0.2
16.5 +
-
0.2
29 +
-
0.2
Ø
27.5
6.5
30
(20.8)
15
+-0.3
29 +
-
0.2
28 +
-
0.3 (7.8)
5.5
(36.6)
4-M3 depth 5
C0.5
C0.5
C0.5
1
3
4
2
NO.SWITCH NAME FACTORY-SETTING MODE
1
Shutter speed/Mode Dip switch 1-4: Shutter speed OFF
setting DIP switch Dip switch 5: FRAME/FIELD FRAME
Dip switch 6-8: External trigger
Normal
shutter mode, restart/ reset mode
Dip switch 9: Gamma ON/OFF OFF
Dip switch 0: GAIN Manual
2
Manual GAIN (M GAIN) control knob Twelve o'clock position
3
HD/VD signal input/output switch EXT
4
75 Ω termination switch ON
12-pin multi-connector
XC-ES50/ES50CE/ES51/ES51CE/ES30/ES30CE
XC-EI50/EI50CE/EI30/EI30CE/EU50/EU50CE
XC-ES50L/ES50LCE
PIN NO.EXTERNAL SYNC (HD/VD) INTERNAL SYNC (HD/VD)
1 GND GND
2 +12 V +12 V
3 GND GND
4 VIDEO output VIDEO output
5 GND GND
6 External HD input Internal HD output
7 External VD input
*1
Internal VD output
8 GND GND
9 -0 WEN output
*2
WEN output
*2
!¡ TRIG input TRIG input
!™ GND GND
*1 HD/VD input is required when using restart, reset mode.
*2 WEN output works only when in external trigger shutter mode.
1
2
3
4
5
6
7
8
9
!¡
0
!™
12-pin multi-connector
Sony Contacts
ISS for Central Zone +49 221 537 3668
(Austria, Czech Republic, Germany, Hungary, Netherlands, Poland,
Russia, Slovakia, Slovenia,German-speaking Switzerland)
ISS for Nordic Zone +45 43 55 70 77
(Baltics, Denmark, Finland, Norway, Sweden)
ISS for Other Zone +44 1932 816 315
(UK, Ireland, Greece, Israel, South Africa)
ISS for South Zone +33 1 55 90 35 38
(Belgium, France, Portugal, Spain, French-speaking Switzerland)
ISS for Italy +39 (0) 6 334 372 27
Loading...