Sony VPL-VW100 User Manual

Sample Code Strings

Below are representative samples of code strings for the VPL-VW100. They can be used together with the
Protocol Manual to help insure that the correct protocol is being implemented in writing the strings. Included
are samples for Power ON and OFF and input selection commands, as well as additional information such as
Check Sum calculation and Port settings.

0xA9,0x17,0x2E,0x00,0x00,0x00,0x3F,0x9A

Power ON

Sample

Power OFF

Sample

Picture Mute ON

Sample

Red indicates verified string

Picture Mute OFF Send as numbers

Sample

Input Video Input DVI

Sample

Input SVideo

Sample

Input A

Sample

Input Component Input HDMI

Sample

： Start Code / End Code

： Command Category

： Data

： Check Sum

A9 17 2E 00 00 00 3F 9A

A9 17 2F 00 00 00 3F 9A

A9 00 30 00 00 01 31 9A

A9 00 30 00 00 00 30 9A

A9 17 2A 00 00 00 3F 9A Sample A9 00 01 00 00 05 05 9A

A9 17 5F 00 00 00 5F 9A

A9 17 2B 00 00 00 3F 9A

A9 17 2c 00 00 00 3f 9A Sample A9 00 01 00 00 04 05 9A

Sample A9 17 2E 00 00 00 3F 9A

NOTE: Check Sum is arrived at by adding together bits 2-5 using OR
function.

Power ON

Hex strings can be verified in Terminal program issued as numbers, not
ASCII, see above.

Port setting is 38400, Parity even, stop bits 1, Hardware Flow control none,
send Hex bits

Input Component

Sample

Wide Mode Full Pic mode Dynamic

Sample

Wide Mode Normal Pic mode Standard

Sample

Wide Mode Wide Zoom Pic mode Cinema

Sample

Wide Mode Zoom Pic Mode User 1

Sample

Wide Mode Subtitle

Sample

A9 00 01 00 00 03 03 9A

A9 00 20 00 00 00 20 9A Sample A9 19 51 00 00 00 59 9a

A9 00 20 00 00 01 21 9A Sample A9 19 52 00 00 00 5B 9a

A9 00 20 00 00 02 22 9A Sample A9 19 53 00 00 00 5B 9a

A9 00 20 00 00 03 23 9A Sample A9 19 54 00 00 00 5D 9a

A9 00 20 00 00 04 24 9A

： Start Code / End Code

： Command Category

： Data

： Check Sum