Sony VPL-SX235, VPL-SX225, VPL-SW235, VPL-SW225 Product Sheet

VPL-S200 Series

Data Projectors

VPL-SW235 VPL-SW225
VPL-SX235 VPL-SX225

Deliver Powerful Presentations Even in
a Limited Space with Short-throw Projectors

Sony’s VPL-S200 Series short-throw projectors improve ease of use in

the education and business.

In its latest short-throw projector line-up, Sony has added two

higher-brightness models, delivering 3200 lumens XGA (VPL-SX235)

and 3000 lumens WXGA (VPL-SW235).

FEATURES

Simple Installation

Short Projection Distance

Each Projector is equipped with a short focal length lens, which
makes it possible to project images from a shorter distance.

VPL-EX246 VPL-SX235

0.75 m

2.29-3.68 m

The presenter is not distracted by the projected image,
and it’s easier for the audience to see the projected image
because shadow of the presenter on the screen is minimized.

With conventional models

(Normal throw)

“Blend-in” Design

These projectors fit into any
interior with their simple,
stylish, and modern design.

80 inch
image

The values are approximate.

With the VPL-S200 Series

(Short throw)

Natural and Vivid Color

A 3LCD projection system
enables each projector to
present bright and natural
images.
This is achieved by combining
an advanced generation of
inorganic LCD panels that utilize
Sony’s BrightEra™ technology
with the 3LCD projection system.

Constant Brightness

Constant Brightness is a new
lamp technology to keep

1

brightness constant*

at 60%

~ 70% and deliver fine picture

Constant Brightness ON

First day

2 years later*

2

quality over a long period of

2

time.*

*1 Outputs light at a specific brightness

level. It is a technical specification
that projector brightness gradually
reduces over time due to the effect
of other factors.

*2 5 hours/day, 20 days/month,

9 month/year.

Simulated images

Good TCO, Energy-efficient Design

Long-lasting Lamp

By incorporating a high-performance lamp and advanced
lamp-control technology, these projectors deliver an extremely
long lamp replacement time of 10,000 hours*.

* Approximate recommended period, in low mode.

High Image Quality

High Brightness

With a brightness of 3200 lm / 3000 lm*, the projected image
can clearly seen, even in a bright room. Users do not have to
turn down the light or pull closed the curtains or blinds each
time they use the projector.

* VPL-SX235: 3200 lm; VPL-SW235: 3000 lm

VPL-SW235, VPL-SX235Previous short slow

Simulated images

2

VPL-SW235

10,000 hours

VPL-SW125

Conventional

model

6,000 hours

Recommended lamp replacement time

* Lamp mode: low. *Comply with IEC61947 standard.

66% up

Lamp Dimming Function

After 10 seconds of a static signal feed, the lamp dims by
approximately 15%. After a configurable set period of time
this function dims the lamp to as low as approximately 30% of
original brightness.