Page 1
3LCD Projectors
VPL-FE40
VPL-FE40L
VPL-FX40
VPL-FX40L
Page 2
Bright, stylish, easy to install, and simple to use, the
Sony VPL-FE40 and VPL-FX40
*1
3LCD projectors incorporate
enhanced networking capabilities to deliver seamless
presentations in a wide variety of locations from any PC
on the network.
Delivering an extremely bright 4000 ANSI lumens
VPL-FE40 and VPL-FX40 are excellent projectors for high-impact multimedia
presentations. For applications ranging from business conferences and seminars to
education, in locations such as boardrooms, large conference rooms, R&D facilities,
and university classrooms, these projectors will captivate audiences with
breathtaking image quality.
The VPL-FE40 offers incredible SXGA+ resolution to project clear and crisp images
even on large screens, while the VPL-FX40 offers native XGA resolution for high
image quality. With its outstanding functionality, simple operation, and network
capabilities, these projectors provide you with the tools to perform seamless
presentations. The projectors‘ ability to accept a broad array of signals, including
those from sources equipped with the latest High-Definition Multimedia Interface
(HDMI), can increase the dynamics of your presentations. And with the VPL-FE40L
and VPL-FX40L, you can choose a lens that meets the requirements of your specific
applications. System integrators will appreciate the projectors‘ design, which
includes features for easy installation, such as a centered lens and power zoom,
focus, and shift, while maintenance personnel can easily replace lamps and clean
filters thanks to their easy access.
With all the features and functionality that you expect from Sony, including those
for installation, projection, usability, and maintenance, the VPL-FE40 and VPL-FX40
are perhaps the most thoughtfully designed projectors available today. Take your
presentations to the next level!
*2
in a sophisticated body, the
*1
Unless otherwise specified, “VPL-FE40” refers to both the VPL-FE40 and VPL-FE40L, and “VPL-FX40”refers to
both the VPL-FX40 and VPL-FX40L.
*2
ANSI Lumen is a standard measuring of the American National Standards Institute IT7.228. Since there are
multiple methods of measuring brightness, the way that brightness is specified will vary among manufacturers.
2
Page 3
FEATURES
High-Quality Images and Incredible
Performance
Outstanding Brightness of 4000 ANSI
Lumens in a Beautifully Styled Projector
Both the Sony VPL-FE40 and VPL-FX40 Data
Projectors achieve an outstanding brightness of 4000
ANSI lumens for dynamic, large-screen presentations
even in high ambient lighting environments. By
combining a new generation of inorganic LCD panels
that utilize Sony BrightEra
powerful 275W lamp, these beautifully styled
projectors are excellent for bringing your
presentations to life.
*3
BrightEra" is a brand name for the category of next
generation LCD panels having pixels with large aperture
ratios and adopting inorganic alignment films. Sony is the
first manufacturer to succeed in developing this technology
for a High-Temperature Polysilicon (HTPS) TFT LCD panel.
Extremely High Resolution (SXGA+ or XGA)
Offering native SXGA+ (1400 x 1050) resolution, the
VPL-FE40 projects extremely clear and detailed highquality images even on a large screen. And the
VPL-FX40 offers native XGA (1024 x 768) resolution
for high picture quality.
TM
technology*3with a
3LCD Projection System
Because the VPL-FE40 and VPL-FX40 adopt a 3LCD
projection system, projected images are bright and
natural. 3LCD is a projection system using three LCD
panels (also known as high-temperature polysilicon or
HTPS). This system provides high light transmission
and excellent color reproduction. It also provides
smooth gradients in dark areas, and even helps
prevent color breakup.
Dynamic Detail Enhancer (DDE) for HighQuality Video Images
This unique Sony video-enhancing technology
incorporated in the VPL-FE40 and VPL-FX40
projectors generates high-quality images of
outstanding clarity. For interlaced video sources, I/P
(Interlace/Progressive) conversion is applied to the
signals to project clear and sharp progressive images.
When displaying film-originated sources, signals
converted by 2-3/2-2 pull down are detected, and
each frame of the original film is accurately
reproduced.
12-bit 3D Gamma Correction and 3D Digital
Comb Filter
The VPL-FE40 and VPL-FX40 projectors incorporate
12-bit 3D Gamma Correction circuitry to perform
highly accurate gamma correction, achieving uniform
image color and brightness that extends right to the
corners of the screen. What‘s more, the 3D Digital
Comb Filter separates Y signals from C signals with
great accuracy, which emphasizes fine images and
shape boundaries.
SXGA+ Resolution: Clear and Detailed Images (simulated image)
Odd-Numbered Lines Even-Numbered Lines
I/P Conversion
(simulated image)
3
Page 4
Installation Flexibility and Easy
Maintenance
Power Zoom/Focus/Picture Shift
(Horizontal and Vertical)
The Zoom, Focus, and Horizontal and Vertical Picture
Shift functions available with the projectors‘ supplied
power-operated lens and optional lenses
controlled both from the projector control panel and
the supplied Remote Commander
be easily adjusted to the desired settings both during
installation and when the projector is in use.
*4
Not available with the optional VPLL-1008 fixed-type lens.
Centered Lens Design
The centered lens provides symmetry for a balanced
installation of the VPL-FE40 and VPL-FX40 projectors,
and makes setup very simple.
*4
can be
TM
unit. Images can
Variety of Optional Lenses
The VPL-FE40 and VPL-FX40 projectors are each
supplied with a power lens as standard for most
general applications. If a specific application requires
a special lens, the VPL-FE40L and VPL-FX40L are
available. The lens is not included with these
projectors, so any of three optional lens types can be
selected. This flexibility allows the VPL-FE40L and
VPL-FX40L to be used for a number of applications –
from long-distance projection in large auditoriums to
short-distance rear-projection applications.
Projection Lens Projection Lens Projection Lens
Fixed Short Focus Lens Middle Focus Zoom Lens Long Focus Zoom Lens
VPLL-1008*6VPLL-Z1024
VPLL-Z1032
Flexible Orientation
The VPL-FE40 and VPL-FX40 projectors can be tilted
90 degrees upwards or downwards. This flexibility
allows the projectors to be used in several different
ways, including in a rear projection system.
Rear Projection System
Twin Stacking Capability
When applications require double the light output,
the VPL-FE40 and VPL-FX40 projectors can be twin-
*5
stacked
matched using the Picture Shift function on each unit.
*5
. Pictures from the two projectors are then
The optional VPLL-1008 lens cannot be used when twin
stacking.
F 2 2.0 - 2.3 2.0 - 2.4
7
Throw ratio*
Zoom — 1.45 1.6
Throwing Distance
8
Screen size*
40-inch — 1880 mm 2590 mm 2550 mm 3940 mm
60-inch 930 mm 2860mm 3940 mm 3890 mm 5980 mm
80-inch 1260 mm 3850 mm 5280 mm 5240 mm 8020 mm
100-inch 1590 mm 4840 mm 6630 mm 6580 mm 10,060 mm
150-inch 2420 mm 7300 mm 9990 mm 9950 mm 15,150 mm
200-inch 3250 mm 9770 mm 13,350 mm 13,310 mm 20,240 mm
300-inch 4910 mm 14,700 mm 20,060 mm 20,040 mm 30,430 mm
400-inch — 19,630 mm 26,780 mm 26,760 mm 40,620 mm
500-inch — 24,570 mm 33,500 mm 33,490 mm 50,810 mm
600-inch — 29,500 mm 40,220 mm 40,220 mm 60,990 mm
*6 When using the VPLL-1008 lens, the center of the image projected from the lens must be
perpendicular to and aligned with the center of the screen vertically (mirror usage is acceptable).
Also, the projector cannot be installed upside-down when using this lens.
*7 Distance between the center of the projector lens and the screen, divided by the screen width.
*8 Viewable area, measured diagonally.
0.78:1 2.38-3.26:1 3.24-4.95:1
Wide Tele Wide Tele
Easy Lamp Replacement and Filter Cleaning
When it‘s time to replace the lamp in the VPL-FE40
and VPL-FX40 projectors, a timely message appears
clearly on the screen. The lamp is accessible from
the side of the projector and the filters from the
front, so lamp replacement and filter cleaning can
be performed without uninstalling the projector.
Direct Power On
Activating this function allows you to skip standby
mode to power on the VPL-FE40 and VPL-FX40
projectors immediately. Direct Power On is ideal for
large-scale facilities such as museums, auditoriums,
and conference halls, with images ready for
projection as soon as the circuit-breaker on the
switchboard is turned on.
4
Easy Lamp Replacement and Filter Cleaning
Page 5
Maintenance and Notifications Via Network
S-VIDEO
MONITOR RGB
RS-232C
IN
AUDIO AUDIO
R/R-Y/P G/Y B/B-Y/P HD VD
AUDIO
HDMI
NETWORK
RGB
AUDIO
VIDEO IN
OUTPUT
REMOTE CONTROL S INPUT C INPUT D INPUT E
PLUG
IN POWER
INPUT A INPUT B
VIDEO AUDIO
L
(MONO)
R
Because the VPL-FE40 and VPL-FX40 projectors can
be connected to a LAN, a number of functions can
be performed remotely using a web browser.
example, the projector‘s current status can be verified
and simple controls, such as powering the unit on or
off, can be performed. Also, the system can be set
up to send automatic e-mail reports to designated
recipients for scheduled maintenance, including
projected lamp life and error reports.
*9
Internet Explorer 5.0 or higher is required.
*9
For
Monitor Output for Presenters
Projected images can be monitored by connecting a
PC display to the VPL-FE40 and VPL-FX40 projectors’
monitor output and placing it in the presenter's field
of view. This allows the presenter to continually face
the audience during the presentation for a fluid and
professional delivery.
Multi-Language OSD
(On-Screen Display)
ID Function for Multi-Projector Installation
The VPL-FE40 and VPL-FX40 projectors have a built-in
ID function, so each projector can be controlled
independently from a single Remote Commander unit.
For multi-projector installations in a single room, this
feature is indispensable both during installation and
operation.
Digital Keystone Adjustment
Vertical Keystone distortion of up to ±30 degrees can
be digitally corrected via the OSD and/or Remote
Commander unit of the VPL-FE40 and VPL-FX40
projectors. This enables detailed images to be
projected with their correct geometry, even when
installation space is limited.
Multiple Interfaces for Flexible
Operation
Multitude of Inputs
The VPL-FE40 and VPL-FX40 projectors accept a wide
variety of input signals, including HDMI
standard for digitally connecting to high-definition
systems), component and composite video, S-Video
(Y/C), and computer signals up to UXGA (fV: 60 Hz) –
which expands the system-connection possibilities.
The VPL-FE40 and VPL-FX40 projectors are equipped
with five BNC connectors, so they can accept signals
from sources such as workstations or professional
video equipment, and these sources can be located far
away from the projector because the interfaces
support long-distance signal transmission.
TM
(the latest
The OSD used for control of the VPL-FE40 and
VPL-FX40 projectors is available in 16 languages:
English, Dutch, French, Italian, German, Spanish,
Portuguese, Russian, Swedish, Norwegian, Japanese,
simplified Chinese, traditional Chinese, Korean, Thai,
and Arabic.
Quiet Operation
The VPL-FE40 and VPL-FX40 projectors are incredibly
quiet, allowing for smooth and undisturbed
presentations. The low fan noise is attributed to a
highly efficient cooling system based on Sony’s
latest technology.
Multi-Function Remote Commander
Unit
The supplied Remote Commander unit for the
VPL-FE40 and VPL-FX40 is useful for both setting up
the projector during installation and changing settings
for a presentation. This unit has buttons for direct
input selection, so users do not
have to toggle through the
entire range of inputs to select
the desired one. With the
projector ID function, each
projector in a multiple-projector
installation can be controlled
independently from a single
remote.
5
Page 6
Network Presentations
LAN
Wireless
Access
Point
Room A Room B
VPL-FE40
VPL-FX40
VPL-FE40
VPL-FX40
PC
PC
PC
PC
When the VPL-FE40 and VPL-FX40 projectors are
installed on a LAN, presentations can be projected from
any PC on that network
LAN cable or wirelessly. Switching from presenter to
presenter is as easy as clicking a mouse – there‘s no
fussing with cables.
*10
Requires supplied application software to be installed
on your PC.
High-Speed Image Transfer over IP
Networks
Because the VPL-FE40 and VPL-FX40 projectors employ
efficient compression and transmission techniques,
they can receive and project images via IP networks for
effective presentations from any networked PC.
In fact, they can even handle animated Microsoft
PowerPoint®presentations.
Network Presentations Using Up To Five
Projectors
Up to five VPL-FE40 or VPL-FX40 projectors can be
connected to a network, with the image from a single
PC projected on each of them. This feature is ideal for
both large venues and multiple rooms in which images
have to be projected from various locations.
Network Presentations Almost Anywhere
By manually registering your PC‘s IP address to the
VPL-FE40 and VPL-FX40 projectors, images can be
projected not only across the country, but across the
globe. This is ideal for applications such as distance
learning and long-distance corporate communication.
*10
– whether connected via a
®
Network Presentation System Diagram
System Requirements to Run Supplied Application Software
Hardware CPU: Intel®Pentium®III 600-MHz processor or faster
Operating System Microsoft
Browser Internet Explorer 5.0 or higher
Sony cannot guarantee that the application software will run properly even though all of the above system
requirements are met.
Notice Regarding Network Presentations
• When an image is sent from a computer to the VPL-FE40 projector, the image is processed using
1024 x 768 pixels.
• Animation effects and the slide show function in Microsoft PowerPoint presentations can be used;
however, transmission delays may occur if a large number of effects are performed at once or if
several slides are turned at once.
• Network transmission is not suitable for video.
• Network transmission should not be used with sound.
• Applications that use DirectX
• When using Windows XP or Windows 2000 Operating Systems, the user must be logged into an
account with computer administrator access.
• Application software is provided in English and Japanese.
• Network presentations may not be possible depending on network environment and available
bandwidth.
Memory: 64 MB or more (128 MB or more is recommended).
128 MB or more is required when using Microsoft®Windows®XP
Hard disk: 10 MB or more of free space
Other hardware requirements: Display (XGA recommended), Network Capability, CD-ROM Drive
®
Windows®98 SE / Windows ME / Windows 2000 /
Windows XP Home Edition, Windows XP Professional Edition
®
application programming interface may not be displayed properly.
Other Features
• Smart APA (Auto Pixel Alignment)
• Password-Authentication System
• Picture/Audio Muting
OPTIONAL ACCESSORIES AND SYSTEMS
LMP-F270
Projector Lamp (for replacement)
PCS-G70
Large-venue Visual Communication Systems
Ideal for distance learnning and corporate videoconferencing applications
6
PSS-610
Suspension Support
RM-PJPK1
Presentation Tool
PCS-G50
Visual Communication Systems
Page 7
Preset Signal Chart
21 (532)
19
5
/8 (116)
2
5
/8
(65.4)
5
1
/4
(133)
19
5
/8 (497)
19
3
/4 (500)
4
1
/2 (112)
11
3
/4 (298)
11 (279)
21
/32 (16.5)
21 (532)
5
3
/4 (145)
3
1
/2 (87.5)
13
7
/8 (352)
1
5
/8 (40)
1
7
/8
(47.5)
No. Preset signal fH (kHz) fV (Hz) Sync SIZE
1 Video 60 Hz Video 60 Hz 15.734 59.940 – –
2 Video 50 Hz Video 50 Hz 15.625 50.000 – –
3 480/60i DTV 480/60i 15.734 59.940 S on G/Y –
4 575/50i DTV 575/50i 15.625 50.000 S on G/Y –
5 480/60p 480/60p (NTSC 31.470 60.000 S on G/Y –
6 575/50p 575/50p (PAL 31.250 50.000 S on G/Y –
7 1080/60i 1035/60i, 1080/60i 33.750 60.000 S on G/Y –
8 1080/50i 1080/50i 28.130 50.000 S on G/Y –
10 720/60p 720/60p 45.000 60.000 S on G/Y –
11 720/50p 720/50p 37.500 50.000 S on G/Y –
12 1080/60p 1080/60p 67.500 60.000 S on G/Y –
13 1080/50p 1080/50p 56.260 50.000 S on G/Y –
21 640 x 350 VGA Mode 1 31.469 70.086 H-pos, V-neg 800
22 VESA 85 (VGA350) 37.861 85.080 H-pos, V-neg 832
23 640 x 400 NEC PC98 24.823 56.416 H-neg, V-neg 848
24 VGA Mode 2 31.469 70.086 H-neg, V-pos 800
25 VESA 85 (VGA400) 37.861 85.080 H-neg, V-pos 832
Progressive
component)
Progressive
component)
Installation Diagrams
(When using the VPL-FE40 or VPL-FX40 with supplied lens)
Floor Installation
Screen size* 40 60 80 100 120 150 180 200 250 300 400 500 600
a min mm 1480 2260 3030 3810 4580 5740 6900 7680 9610 11550 15420 19290 23160
(inches)
max mm 1900 2880 3860 4840 5820 7290 8760 9740 12190 14640 19540 24440 29350
b min mm x-305 x-457 x-610 x-762 x-914 x-1143 x-1372 x-1524 x-1905 x-2286 x-3048 x-3810 x-4572
max x
c min mm x-392 x-545 x-697 x-850 x-1002 x-1231 x-1459 x-1612 x-1993 x-2374 x-3136 x-3898 x-4660
max mm x-88
(58 3/8) (89) (119 5/16) (150 1/8) (180 3/8) (226 1/8) (271 3/4) (302 1/2) (378 1/2) (454 7/8) (607 1/4) (759 5/8) (912)
(inches)
(74 7/8) (113 1/2) (152) (190 5/8) (229 1/4) (287 1/8) (345) (383 5/8) (480) (576 1/2) (769 1/2) (962 3/8) (1155 3/4)
(inches)
(x-12)
(x-18)
(x-24)
(inches) (x-15 1/2
(inches)
) (x-21 1/2
(x-30) (x-36) (x-45) (x-54)
) (x-27 1/2
) (x-33 1/2
) (x-39 1/2
) (x-48 1/2
(x-60) (x-75 1/8
) (x-57 1/2)(x-63 1/2)(x-78 1/2
(x-31/2
)
No. Preset signal fH (kHz) fV (Hz) Sync SIZE
26 640 x 480 VGA Mode 3 31.469 59.940 H-neg, V-neg 800
27 Mac 13 35.000 66.667 H-neg, V-neg 864
28 VESA 72 37.861 72.809 H-neg, V-neg 832
29 VESA 75 (IBM M3) 37.500 75.000 H-neg V-neg 840
30 VESA 85 43.269 85.008 H-neg V-neg 832
31 800 x 600 VESA 56 35.156 56.250 H-pos, V-pos 1024
32 VESA 60 37.879 60.317 H-pos, V-pos 1056
33 VESA 72 48.077 72.188 H-pos, V-pos 1040
34 VESA 75 (IBM M5) 46.875 75.000 H-pos, V-pos 1056
35 VESA 85 53.674 85.061 H-pos, V-pos 1048
36 832 x 624 Mac 16 49.724 74.550 H-neg, V-neg 1152
37 1024 x 768 VESA 60 48.363 60.004 H-neg V-neg 1344
38 VESA 70 56.476 70.069 H-neg V-neg 1328
39 VESA 75 60.023 75.029 H-pos, V-pos 1312
40 VESA 85 68.677 84.997 H-pos, V-pos 1376
45 1280 x 960 VESA 60 60.000 60.000 H-pos, V-pos 1800
46 VESA 75 75.000 75.000 H-pos, V-pos 1728
47 1280 x 1024 VESA 60 63.974 60.013 H-pos, V-pos 1696
48 SXGA VESA75 79.976 75.025 H-pos, V-pos 1688
49 SXGA VESA85 91.146 85.024 H-pos, V-pos 1476
50 1400 x 1050 SXGA+ 65.317 59.978 H-neg, V-pos 1864
51 1600 x 1200 UXGA VESA60 75.000 60.000 H-pos, V-pos 2100
55 1280 x 768 1280 x 768/60 47.776 59.870 H-neg, V-pos 1664
56 1280 x 720 1280 x 720/60 44.772 59.855 H-neg, V-pos 1664
- Preset signal Nos. 1-2, 21-25, 27-31, 33-35, 38-40, 46, 48-49, and 56 are analog only.
- Preset signal Nos. 12 and 13 are digital only.
- Images may not be reproduced correctly when signals other than those listed above are input.
- Contact your local Sony sales office for more information regarding signals not listed.
) (x-90 1/8
) (x-120 1/8
) (x-150 1/8
) (x-180 1/8
) (x-93 1/2
) (x-123 1/2
) (x-153 1/2
) (x-183 1/2
a: Distance between the screen and the center of the lens
b: Distance between the floor and the center of the lens
c: Distance between the floor and the foot of the projector
x: Distance between the floor and the center of the screen (free)
)
x
b
c
)
a
Ceiling Mounted Installation
Screen size* 40 60 80 100 120 150 180 200 250 300 400 500 600
a min mm 1480 2260 3030 3810 4580 5740 6900 7680 9610 11550 15420 19290 23160
(inches)
max mm 1900 2880 3860 4840 5820 7290 8760 9740 12190 14640 19540 24440 29350
b min mm c+85
max mm c+91
x min mm c+85
max mm c+390 c+542 c+695 c+847 c+999 c+1228 c+1457 c+1609 c+1990 c+2371 c+3133 c+3895 c+4657
For both Floor and Ceiling Mount Installations, image can be shifted horizontally by +/- 10 percent of the screen width.
* Viewable area, measured diagonally.
(58 3/8) (89) (119 5/16) (150 1/8) (180 3/8) (226 1/8) (271 3/4) (302 1/2) (378 1/2) (454 7/8) (607 1/4) (759 5/8) (912)
(inches)
(74 7/8) (113 1/2) (152) (190 5/8) (229 1/4) (287 1/8) (345) (383 5/8) (480) (576 1/2) (769 1/2) (962 3/8) (1155 3/4)
(inches)
(inches)
(inches)
(inches)
(c+15 3/8
) (c+21 3/8
) (c+27 3/8
) (c+33 3/8
) (c+39 3/8
) (c+48 3/8
c+3 3/8
c+3 5/8
c+3 3/8
) (c+57 3/8
) (c+63 3/8
) (c+78 3/8
) (c+93 3/8
DIMENSIONS
) (c+123 3/8
) (c+153 3/8
) (c+183 3/8
Unit: inches (mm)
a
b
c
x
a: Distance between the screen and the center of the lens
b: Distance between the ceiling and the center of the lens
c: Distance between the ceiling and the surface of the suspension
support (PSS-610 recommended)
[using adjustment pipe (b): 6, 7, 7 7/8 inches (150, 175, 200 mm)]
[using adjustment pipe (c): 9 7/8, 10 7/8, 11 7/8 inches (250, 275,
)
300 mm)]
x: Distance between the ceiling and the center of the screen (free)
7
Page 8
SPECIFICATIONS
Optical
Projection system 3 LCD panels, 1 lens projection system
LCD panel 0.79-inch SXGA+ panel, 4,410,000 (1400 x 1050 x 3) pixels 0.79-inch XGA panel, 2,359,296 (1024 x 768 x 3) pixels
Projection lens 1.3 times power zoom lens, Not supplied 1.3 times power zoom lens, Not supplied
Lamp 275W ultra high pressure Lamp
Screen coverage 40 to 600 inches* 40 to 600 inches* 40 to 600 inches* 40 to 600 inches*
Light output 4000 ANSI lumens (lamp mode high) , 3200 ANSI lumens (lamp mode standard)
Signals
Color system NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60 (automatically/manually selected)
Resolution Video : 750 TV lines, RGB : 1400 x 1050 pixels Video : 750 TV lines, RGB : 1024 x 768 pixels
Acceptable computer signals fH : 19 to 92KHz, fV : 48 to 92Hz (Up to UXGA (fV 60Hz))
Acceptable video signals 15k RGB 50/60Hz, Progressive Component 50/60Hz, DTV (480/60i, 575/50i, 480/60p, 575/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p),
Speakers
General
Dimensions (W x H x D) 21 x 53/4 x 137/8 inches, (532 x 145 x 352 mm)
Weight Approx. 21 lbs 10 oz (9.8 kg) Approx. 19 lbs 13 oz (9.0 kg) Approx. 21 lbs 10 oz (9.8 kg) Approx. 19 lbs 13 oz (9.0 kg)
Power requirements AC 100 to 240 V, 4.1-1.7 A, 50/60 Hz
Power consumption Max. 400 W, Standby 15 W, Standby (low) 0.5 W
Heat dissipation 1365 BTU
Operating temperature 32 to 95 °F (0 to 35 °C)
Operating humidity 35 to 85% (no condensation)
Storage temperature -4 to 140 °F (-20 to 60 °C)
Storage humidity 10 to 90%
Inputs/Outputs
VIDEO IN
Video Composite Video (RCA phono jack)
S Video Y/C Mini DIN 4-pin
Audio Stereo (RCA phono jack x2)
INPUT A
Analog RGB HD D-sub 15-pin (female)
Audio Stereo mini jack
INPUT B
Analog RGB HD D-sub 15-pin (female)
Audio Stereo mini jack
INPUT C
Analog RGB/component BNC x5 (female)
Audio Stereo mini jack
INPUT D
Digital RGB /Audio HDMI (HDCP)
INPUT E
Network RJ45: 100BASE-TX/10BASE-T
OUTPUT
Monitor outHD D-sub 15pin
Audio Stereo mini jack (variable out)
REMOTE RS-232C: D-sub 9 pin (female)
Control S IN Stereo mini jack (plug-in-power)
Supplied accessories
* viewable area measured diagonally
VPL-FE40 (standard lens) VPL-FE40L (lens is optional) VPL-FX40 (standard lens) VPL-FX40L (lens is optional)
f30.6 to 39.7 mm, F1.66 to 2.18 f30.6 to 39.7 mm, F1.66 to 2.18
(with VPLL-Z1024 or VPLLZ1032), (with VPLL-Z1024 or VPLLZ1032),
60 to 300 inches* (with VPLL-1008) 60 to 300 inches* (with VPLL-1008)
Composite Video, Y/C Video
1.8 W x 2 (Stereo)
Remote Commander Unit
Lens cap Lens hole cover Lens cap Lens hole cover
Operating Instructions and Application Software (CD-ROM)
Size AA (R6) batteries (x2)
AC power cord
Quick Reference Manual
Safety Regulations
Security Label
Warranty Card
• Halogenated flame retardants are not used in cabinets or printed wiring boards.
• Standby power consumption: 0.5 W
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
www.sony.com/projectors
DI-0112
MK10370V1
Reproduction in whole or in part without written permission is prohibited.
© 2006 Sony Electronics Inc. All rights reserved.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Projected images in this brochure are simulated.
Sony, BrightEra and Remote Commander are trademarks of Sony.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
All other trademarks are the property of their respective owners.
Printed in USA (11/06)
Loading...