SPECIFICATIONS
AUDIO OUT:
Phono, Max. 1 V rms when input is 500 mV rms, impedance more than 1 k½
INPUT B/C: Open for optional IFB board
CONTROL S IN/
Stereo mini jack 5 Vp-p,
PLUG IN POWER:
Plug in power DC 5 V maximum output 60 mA
CONTROL S OUT: Stereo mini jack 5 Vp-p
REMOTE
RS-232C/ RS-422A*3:
D-sub 9-pin (female)
PJ COM*4: D-sub 9-pin x2 (female)
Trig: Mini jack
Power ON: 12 V, output impedance 4.7 k½
Power OFF: 0 V
SAFETY REGULATIONS
VPL-FX200: UL 1950, cUL 950, FCC Class A, IC Class A
VPL-FX200: EN 60 950 (TÜV), CE, C-tick
ACCESSORIES
SUPPLIED ACCESSORIES:
Remote commander RM-PJ1001
Remote commander cable (15 m)
AA size battery (x3)
AC power cord
PJ COM termination
Lens ring
Operation manual
Installation manual
OPTIONAL ACCESSORIES:
Projector quadruple lamp (for replacement) LMP-Q120
Projector individual lamp LMP-S120
1.3 times zoom standard focus lens VPLL-Z2019
1.6 times zoom long focus lens VPLL-Z2025
1.5 times zoom long focus lens VPLL-Z2039
Fixed long focus lens VPLL-2075
Fixed short focus lens VPLL-2014
Fixed short focus lens VPLL-2009
Stack stand (for twin and triple stacking) SU-PJ2000
Suspension support PSS-2000
Suspension support PSS-10
Signal adaptor HD D-sub 15-pin®D-sub 9-pin (for SIC Cable) ADP-10
Signal adaptor Macintosh®®VGA ADP-20
D-sub HD 15-pin®5 BNC cable SMF-400
D-sub HD 15-pin®D-sub HD 15-pin SMF-401
Interface board IFB-12A/20/21/30/1000/50
Signal interface cable SIC-20A/20B/20C/21/22
Signal interface switcher PC-3000
9-pin remote cable RCC-5G/10G/30G (for RS-422A)
Remote commander RM-PJ3000S*
5
Remote control receiver RM-PJ10
100-inch flat screen VPS-100FH*
6
120-inch flat screen VPS-120FH*
6
*1 ANSI lumens is a measuring method of the American National Standards Institute ANSI IT7.228.
*2 The VPL-FX200 supports 1125/60/2:1 and 1125/59.94/2:1 (SMPTE-240M/274M) HDTV systems.
*3 RS-232C/RS-422A selectable.
*4 PJ COM complies with RS-485.
*5 Laser Type: Class II
Wavelength:645 nm
Output: l mW
*6 Not available in some areas. For details, contact your nearest Sony office.
OPTICAL
Projection system: 3 LCD panels, 1 lens projection
LCD panel: 1.8-inch TFT LCD panel, 2,359,296 pixels (786,432 pixels x3)
Lamp: 120 W UHP lamp (x4)
Light output: ANSI 3100 lm*1(typical)
Projection picture size: 40-inch to 500-inch (viewable area, measured diagonally)
Optional projection lenses:
Throwing distance (unit: mm)
40-inch 100-inch 300-inch
VPLL-Z2019
(1.3 times zoom lens)
1,490 - 1,890 3,870 - 4,880 11,820 - 14,840
VPLL-Z2025
(1.6 times zoom lens)
N.A. 5,020 - 7,750 15,430 - 23,580
VPLL-Z2039
(1.5 times zoom lens)
N.A. 7,990 - 11,480 24,300 - 34,760
VPLL-2075
(fixed long focus lens)
N.A. 15,000 44,660
VPLL-2014
(fixed short focus lens)
1,030 2,760 8,520
VPLL-2009
(fixed short focus lens)
640 1,800 5,670
GENERAL
Color system: NTSC/PAL/SECAM/NTSC4.43/PAL-M (automatically selected)
Resolution: Video: 600 TV lines
RGB: 1024 x 768 pixels
Scanning frequency: fH: 15 kHz - 94 kHz
fV: 50 Hz - 120 Hz
Display area: >6.4 µsec
Speaker: 5 W stereo
Power requirements: VPL-FX200: AC 100 to 240 V, 50/60 Hz
(UL approved for AC 120 V operation)
VPL-FX200: AC 220 to 240 V, 50/60 Hz
Power consumption: VPL-FX200: 770 W (Max.), 15 W (Standby)
VPL-FX200: 770 W (Max.), 20 W (Standby)
Heat dissipation: 2628 BTU
Dimensions:
562 (W) x 237 (H) x 649 (D) mm (22 1/4 x 9 3/8 x 25 5/8 inches)
Weight: Approx. 34.5 kg (75 lb 14 oz)
Operating temperature: 0 to 40°C (32 to 104°F)
Operating humidity: 35 to 85% (no condensation)
Storage temperature: -20 to 60°C (-4 to 140°F)
Storage humidity: 10 to 90%
INPUTS/OUTPUTS
VIDEO IN
Composite video: Loop-through BNC 1.0 Vp-p ± 2 dB sync negative, 75 ½
S VIDEO IN
Y IN: BNC 1.0 Vp-p ± 2 dB sync negative, 75 ½
C IN: BNC Burst 0.286 Vp-p ± 2 dB (NTSC), 75 ½ or
0.3 Vp-p ± 2 dB (PAL), 75 ½
Y/C IN: Loop-through Mini DIN 4-pin
Y(luminance): 1.0 Vp-p ± 2 dB sync negative, 75 ½
C(chrominance): Burst 0.286 Vp-p ± 2 dB (NTSC), 75 ½ or
0.3 Vp-p ± 2 dB (PAL), 75 ½
AUDIO IN: Phono, stereo, 500 mV rms, impedance more than 47 k½
INPUT A
Analog RGB/Component: BNC x 5
R/R-Y: 0.7 Vp-p ± 2 dB positive, 75 ½
G: 0.7 Vp-p ± 2 dB positive, 75 ½
G with sync/Y: 1.0 Vp-p ± 2 dB sync negative, 75 ½
B/B-Y: 0.7 Vp-p ± 2 dB positive, 75 ½
SYNC/HD
Composite sync: 0.6 - 8 Vp-p high impedance, sync positive/negative
Horizontal sync: 0.6 - 8 Vp-p high impedance, sync positive/negative
VD
Vertical sync: 0.6 - 8 Vp-p high impedance, sync positive/negative
HDTV
*2(Y/PB/PR): BNC
Y: 1.0 Vp-p ± 2 dB positive, 75 ½,
Tri-level sync: ±0.3 Vp-p
Bi-level sync: 0.3 Vp-p
PB/PR: ±0.35 Vp-p ± 2 dB positive, 75 ½
HDTV
*2(GBR): BNC
G with sync: 1.0 Vp-p ± 2 dB, 75 ½,
Tri-level sync: ±0.3 Vp-p
Bi-level sync: 0.3 Vp-p
B/R: 0.7 Vp-p ± 2 dB positive, 75 ½
Audio IN: Phono, stereo, 500 mV rms, impedance more than 47 k½