
Welcome to Verizon Wireless. You’re now
part of a growing movement that’s about
speed, signal and strength. This guide will
show you how to set up and use your phone,
access special features, and find help.
Charge the Phone
Before turning on your phone, charge it
fully.
1. Insert the small end of the USB cable
into the USB/Charger Port.
2. Insert the other end into the power
adapter, and then plug the power adapter
into an electrical outlet.
NOTE: You can also use a Qi/PMA wireless charging
accessory to charge your phone.
WARNING! Please use only an approved charging accessory
to charge your phone. Improper handling of the charging
port, as well as the use of an incompatible charger, may
cause damage to your device and void the warranty.
Setting Up Your Phone

Optional: Replace the SIM Card
Your phone comes with the SIM card
already installed.
If you need to replace the SIM card:
1. With the phone facing down, open the
SD/SIM card slot cover. Using a fingernail,
pull out the card tray.
2. Remove the SIM card.
3. Carefully insert the new 4G LTE SIM
card into the card tray with the Verizon logo
facing down.
4. Push the card tray back into place. Close
the SD/SIM card slot cover.
1
4
2 3

Optional: Insert the microSD Card
1. With the phone facing down, open the
SD/SIM card slot cover. Using a fingernail,
pull out the card tray.
2. Carefully slide the micro SD card into
the card tray with the gold contacts facing
up.
3. Push the card tray back into place.
Close the SD/SIM card slot cover.
NOTE: The microSD card is sold separately.

Front Camera
Volume/
Zoom Key
USB/Charger Port
Camera Key
Speaker
CAUTION: At purchase, there are two sheets of plastic
film on the front of your device. You can peel off the outer
sheet of film when you start using the device. It is not
recommended to peel off the second sheet of film as it
protects your screen from damage and scratching.
Charging/Notification Light
Power/Lock
Key
Proximity/Light Sensor
Ear Speaker

SD/SIM
Card Slot
NFC
Detection
Area
Headset Jack
Wireless Charge
Detection Area
Back
Camera
Camera
Light
CAUTION: Your device has a capless USB port. The USB port
must be completely dry before a cable can be connected for
charging or data transfer, for example. If your device gets
exposed to water and the USB port gets wet, wipe the device
dry with a microfiber cloth and shake it several times with
the USB port facing downwards. Repeat the procedure until
no moisture is visible in the USB port.
Microphone A
Microphone B