Sony Trinitron KV-2199M5J, Trinitron KV-J21MF2J, Trinitron KV-J14M1J Operating Instruction
3-862-260-11 (1)
Trinitron Color TV
Operating Instructions
Mode d’emploi
EN
F
PR
A
KV-2199M5J
KV-J21MF2J
KV-J14M1J
1997 by Sony Corporation
2
3
1
p KV-2199M5J/J21MF2J
2
SELECT
SELECT PROGR
1
PROGR
VHF LOW B/G
1
3
Getting Started
Connections
Connecting a VHF antenna or a combination VHF/UHF antenna
— 75-ohm coaxial cable (round)
Attach an optional IEC antenna connector to the 75-ohm coaxial cable. Plug the connector into the (antenna) socket
at the rear of the TV.
Rear of TV
or
Rear of TV
On a wall
Connecting an indoor antenna
3
2
1
Notes
• You are advised to use an outdoor antenna for better reception.
• Model KV-J14M1J is used for illustration purposes, however, the connection procedure is the same for KV-2199M5J and KV-J21MF2J.
Connecting optional equipment
You can connect optional audio/video equipment to your TV such as a VCR, multi disc player, camcorder, video
game or stereo system.
Connecting video equipment using the … (video input) jacks
Front of TV
p KV-J21MF2J
L(MONO) R
p KV-2199M5J/J14M1J
Camcorder
to video and
audio outputs
…
to
(video input)
(video) and
(audio) inputs
When connecting monaural audio/video equipment to model KV-J21MF2J
Connect the yellow plug to and the black plug to -L (MONO).
-EN
4
Getting Started
: Signal flow
Rear of TV
to antenna socket
p KV-J21MF2J
to
…
(video input)
(video) and
(audio) inputs
p KV-2199M5J/J14M1J
When connecting video equipment to the
… (video input) jack
to video
and audio
outputs
to antenna
output
VCR
: Signal flow
Do not connect video equipment to the … (video input) jacks at the front and the rear of your TV simultaneously; otherwise the picture
will not be displayed properly on the screen.
Connecting audio/video equipment using the Ú (monitor output) jack
Rear of TV
to antenna socket
EN
p KV-J21MF2J
p KV-2199M5J/J14M1J
Ú
to
(monitor output)
(video) and
(audio) inputs
to video
and audio
inputs
to antenna
output
Audio system
VCR
or
: Signal flow
When recording through the Ú (monitor output) jack
Do not change the channel or video input while recording with a VCR; otherwise the channel or video input you are recording also will be
changed.
Getting Started
-EN
5
Presetting channels
TV SYSTEM
SELECT
SELECT
B/G I D/K M
AUTO PROGRAM
SELECT
SELECT
VHF LOW B/G
1
You can preset up to 100 TV channels in numerical
sequence from program position 1 using the buttons on
the remote commander or the TV.
You can preset TV channels quickly, automatically or
manually.
Remote commander
Number
If the picture color is poor and/or the sound is
noisy (for KV-J21MF2J/J14M1J)
Select the appropriate TV system as follows:
1 Press SELECT on the remote commander or the TV
until “TV SYSTEM” appears.
2 Press +/– on the remote commander or . +/– on
the TV until the picture and sound become normal.
Notes
• If you do not know your local TV system, consult your nearest
authorized service center or dealer.
• The setting of the “TV SYSTEM” is memorized for each
program position.
Presetting channels automatically
1 Press SELECT on the remote commander or
the TV until “TV SYSTEM” appears on the
screen (for KV-J21MF2J/J14M1J).
or
PROGR +/–
SELECT
+/–
Front of TV
SELECT PROGR
Quick channel presetting
1 Press U to turn on the TV.
When the TV is turned on in standby mode, press
on the remote commander.
u
2 Press +/– on the remote commander or
. +/– on the TV to select the TV system
(for KV-J21MF2J/J14M1J).
or
3 Press SELECT on the remote commander or
the TV until “AUTO PROGRAM” appears on
the screen.
or
4 Press +/– on the remote commander or
. +/– on the TV.
2 Press SELECT and PROGR + on the TV
simultaneously for one to two seconds.
SELECT PROGR
-EN
6
Getting Started
or
1 2 3 1
Loading...