Sony STR-DE445, STR-DE545, STR-SE501 Service Manual

STR-DE445/DE545/SE501
SERVICE MANUAL
Photo: STR-DE445
Dolby Laboratories Licensing Corporation. “DOLBY” the double-D symbol ; “AC-3” and “PRO LOGIC” are trademarks of Dolby Laboratories Licensing Corporation.
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 8 loads, both channels driven, from 20 – 20,000 Hz; rated 100a) W per channel minimum RMS power, with no more than
0.09% total harmonic distortion from 250 mW to rated output (US model only). STR-DE445: a) 80 W
Amplifier section
Rated Power Output at Stereo mode
US model: (8 20 Hz – 20 kHz, THD
0.09 % ) EXCEPT US: (8 1 kHz, THD 0.7 %) STR-DE545/SE501: 100 W + 100 W STR-DE445: 80 W + 80 W
Reference Power Output
(8 at 1 kHz, THD 0.7 %) STR-DE545/SE501: Front: 100 W + 100 W Center: 100 W Rear: 100 W + 100 W STR-DE445: Front: 80 W + 80 W Center: 80 W Rear: 80 W + 80 W
Frequency response
CD, MD/TAPE, DVD/LD, TV/ SAT, VIDEO, AUX: 10 Hz – 50 kHz +0.5/–2 dB (with sound field, tone, and bass boost bypassed)
Inputs (Analog) 5.1 CH INPUT, CD, DVD/LD,
b) Input short. c) Weighted nework, input level.
Inputs (Digital) DVD/LD (coaxial):
*) STR-DE545 and STR-SE501 only.
Outputs MD/TAPE, (REC OUT); VIDEO
MD/TAPE, TV/SAT, VIDEO, AUX: Sensitivity: 250 mV Impedance: 50 k
b)
S/N
: 96 dB (A, 250 mVc))
Sensitivity: — Impedance: 75 S/N: 100 dB (A, 20 kHz LPF) DVD/LD, TV/SAT* (Optical): Sensitivity: — Impedance: — S/N: 100 dB (A, 20 kHz LPF)
(AUDIO OUT): Voltage: 250 mV, Impedance: 10 k SUB WOOFER: Voltage: 2 V Impedance: 1 k PHONES: Accepts low- and high­ impedance headphones
US Model
STR-DE445/DE545/SE501
Canadian Model
AEP Model
UK Model
STR-DE445/DE545
E Model
Chinese Model
PX Model
STR-DE545
BASS BOOST +6 dB at 70 Hz
TONE ±6 dB at 100 Hz and 10 kHz
Sampling Frequency
48 kHz
FM tuner section
Tuning range 87.5 – 108.0 MHz
Antenna terminals 75 , unbalanced
Sensitivity Mono: 18.3 dBf, 2.2 µV/75
Stereo: 38.3 dBf, 22.5 µV/75
Usable sensitivity 11.2 dBf, 1 µV/75
S/N Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3 % Stereo: 0.5 %
Separation 45 dB at 1 kHz
Frequency response
30 Hz – 15 kHz +0.5/–2 dB
Selectivity 60 dB at 400 kHz
— Continued on next page —
FM STEREO FM-AM RECEIVER
1
3-4. SCHEMATIC DIAGRAM DIGITAL SECTION
See page 7 for Waveforms.
See page 21 for IC Pin Functions.
STR-DE445/DE545/SE501
PIN
FUNCTION
PIN
FUNCTION
PIN
FUNCTION
11 11
3-6. SCHEMATIC DIAGRAM MAIN (1/3) SECTION
See page 7 for Waveforms.
See page 28 for IC Block Diagrams.
STR-DE445/DE545/SE501
13 13
Loading...
+ 4 hidden pages