Sony STR-DA4ES BROCHURE
STR-DA4ES
ES Receiver
•
NNeeww!!
7 Channel Amplifier Design
•
NNeeww!!
Decodes dts 96/24, dts-ES (Discrete/Matrix 6.1) Dolby Digital EX
•
NNeeww!!
Composite to S-Video Up Conversion Circuitry
•
NNeeww!!
12 Volt Trigger (2)and IR Repeat (1 In / 2 Out)
•
NNeeww!!
RS - 232C Control for Custom Integration
Digital Section
• 32-Bit Dolby Digital, Dolby
Pro Logic and dts Decoder
• 7.1 Decoding
• 32 + 32 Bit Full Digital
Signal Processors with 17
Acoustic Environments
• Digital Cinema Sound™
System with Cinema Studio
EX modes
• Digital Concert Hall A/B for
Surround Sound Playback
of Stereo Music Sources
• Dolby® Digital EX Decoding
• dts®
• Dolby® Pro Logic II
• dts® - ES (Matrix 7.1)
• dts® 96/24
• dts® NEO:6
• Sound Field Program:
Cinema - 7
Music - 10
Auto Format Decoding - 1
• Cinema Studio EX A/B/C
Mode
• Digital Concert Hall
• Analog Direct Mode for
Purity of Analog Signal
• Matrix 6.1 Mode
• 7.1 and Digital Concert Hall
A/B
• 96k/24Bit PCM
Amplifier Section
• 7 Channel Amplifier:
110W x 7, 110W x 2
@8 ohms, 20-20kHz
• 4 ohm/8 ohm Switching
• Optimum Preamplification
Processing for Improved
S/N Ratio
• Circuit Device: Discrete
• A/B or A+B Speaker Switch
Front Speakers
• Analog Direct/Analog
Pureness Control
Inputs and Outputs
• 2 Zone/2 Room Audio and
Video Output - Independent
Source Selection and
Volume
• 5.1 and 7.1 Multi-Channel
Analog Input x 2
• 7.1 Channel Pre-Amplifier
Output x 1
• 2 HD Capable Component
Video Inputs/1 Output
• Phono (MM)
• 4 Analog Audio Inputs/2
Output
• 4 Optical Digital Audio
Inputs/1 Output
• 2 Coaxial Digital Input
• 5 Composite Video Inputs/2
Outputs
• 5 S-Video Inputs/2 Output
• 1 Composite Monitor Output
• 1 S-Video Monitor Output
• Front Composite A/V Inputs
• Control A1 II / Control S
Construction Features
• Aluminum Panel
• Frame andBeam
Construction
• Cast Aluminum Heat Sink
• Large Pellet Transistors
• Screw Type Speaker
Terminals
• Gold Plated Inputs/Outputs
• New Circuit Board Design
Convenience Features
• Sound Field Link with Lock
• Tone Control (Electric)
Equalizer: B, M, T/B, M,
T/B, T/B, T
• Multi-Channel Decoding
Blue LED
• On Screen Display
• Analog Bass Management
• Video Up Converter
• RC-232C forUpgrade and
Control
• Tuner with 30 Preset
Channels and Direct Tuning
• Preprogrammed and
Learning Remote Control
with Macros
KEY FEATURES
ADDITIONAL FEATURES
Product Information
Power with Precision Inside this 44 pound behemoth lies a
sonic dream made into reality. Attention to detail is represented
within every element of the design. It is within the amplifier where
form truly meets function.The STR-DA4ES employs unique construction elements to ensure purity with power.The design used to
create the amplifier within the STR-DA4ES is known as a “horizontally” opposed chassis.The output stage of the receiver is built with
the utmost regard to purity of output. Left and Right signal elements are opposed channel by channel on the two separate
heatsinks. Even the heatsinks themselves have been redesigned to
eliminate resonance introduced into the output transistors in a
design known as Sfin.This attention to detail is typically only seen
in the world of high-end separates. Now the quality separates can
be realized within one chassis.
ADDITIONAL FEATURES
KEY TECHNOLOGY
Product Information
Specifications
Amplifier Section
• Multi-Channel Mode:
110W x 7, 0.05% THD
• Stereo Mode (2 Channel):
110 Watts Per Channel x 2
8 ohms, 20 - 20kHz, 0.05%
THD
• Input Sensitivity/Impedance:
Phone: 2.5mV/50 kOhm
Line (CD):150mV/50 kOhm
• Frequency Response (2 20kHz):
Phono: RIAA ±0.5dB
Line (CD): 10Hz-100kHz
+0.5/-2db
• S/N Ratio (IHF-A Network):
Phono: 86dB
Line (CD): 100dB
• Rec Out Level/Impedance:
150mV/10 kOhm
• Pre Out Level/Impedance:
Front:2V/1 kOhm
Center: 2V/1 kOhm
Rear: 2V/1 kOhm
Woofer:2V/1 kOhm
Video Section
• Input Sensitivity/Impedance:
CompositeIn:1Vp-p/75 ohm
S-VideoIn(Y):1Vp-p/75 ohm
S-VideoIn(C):0.286Vp-p/75
ohm
• OutputSensitivity/Impedance :
CompositeIn:1Vp-p/75 ohm
S-VideoIn(Y):1Vp-p/75ohm
S-Video In (C): 0.286Vpp/75 ohm
General
• Power Requirements:
AC120V, 60Hz
• Power Consumption
(Standby): 1W
• Power Consumption (in
Operation): 420W
Accessories
Supplied Accessories
• Instruction Manual
• RM-LP211 Remote Control
Weights & Measures
• Dimensions (W x H x D):
17" x 6.8" x 18.3"
• Weight: 44 lbs.
STR-DA4ES
ES Receiver
©2002 Sony Electronics Inc. All rights
reserved. Features and specifications are
subject to change without notice.
ANTENNA
C
OPTICA
ND/DAT
OPTICA
MD/DA
OPTICA
TV/SAT
OPTICA
D
OPTICA
C
COAXIAL
D
COAXIAL
D
VD/LD
D
VD/LD
D
/SAC
I
N
OUT
I
N
I
N
I
N
/SAC
I
N
I
N
A
IGITAL
D
L
L
T
L
L
L
D
SSIG
NAB
75Ω COAXIAL
LE
FM
IR REMOTE
I
R
OUT 1
I
R
OUT 2
IR I
N
MAI
N
OO
M
R
2
ND
OO
M
R
OUT
TRIGGE
RS232C
U
R
AM
PHONO
IN
L
R
SIGNAL GND
U
COMPONEN
TV/SAT IN DVD/LD IN
Y
R
B
/B-Y
R
/R-Y
P
CD
/S
ACD
IN
FRONT
L
R
MULTI
T VIDEO
MONITOR OUT
MD/DATTAPE
OUTINOUT
SURROUND
CENTER
CHANN
EL INPUT
MONITO
FRONT
L
R
2
MULTI
R
S2 VIDEO
OUT
VIDEO
OUT
IN
SURROUND SURR BACK
CHANN
TV/SATDVD/L
OUTIN
STATUS IN
S2 VIDEOINS2 VIDEO
IN
VIDEOINVIDEO
IN
AUDIO
AUDIO
IN
IN
CENTER
SUB WOOFERSUB WOOFER
EL INPUT
VIDEO 2VIDEO
D
CONTROL S
S2 VIDEO
OUT
VIDEO VIDEO
OUT
AUDIO AUDIO
OUT
FRONT
SURROUND SURR BACK
L
R
1
IN
IN
IN
PRE OUT
OUT
OUT
OUT
OUT
S2 VIDEO
1
IN
IN
IN
CENTER
SUB WOOFER
CTR
A1
2ND
R
OOM
VIDEO OUT
AUDIO
OUT
VARIABLE
IMPEDANCE USE 4-16
L
+
A
+
B
+
+
R
R
R
–
–
–
–
Ω
FRONT
S
URROUND
S
URR BACK
SPEAKERS
L
–
–
L
–
–
L
AC
OUTLET
CENTE
R
–
+
+
+
+
IMPE
DANC
E SELECTO
4 Ω 8 Ω
+
R
Loading...