Page 1
SONY
PAL
SUR VEILLANCE
SYSTEMS
SSC-DC10P/DC14P/DC18P
CCD Colour Video Camera
SSC-DC10P
SSC-DC14P
Lenses shown are options.
SSC-DC18P
Page 2
Sony advanced digital technology
Sony advanced digital technology
delivers greater reliability,
delivers greater reliability,
integrity and versatility
integrity and versatility
in CCTV operation
in CCTV operation
Sony introduces the SSC-DC10P/DC14P/DC18P - three,
1/3-inch colour DSP CCD high resolution cameras specifically
designed for surveillance and monitoring systems.
Sony advanced digital technology ensures these cameras
reproduce high fidelity images even under adverse light
conditions. In addition to flexible automatic backlight
compensation with the Smart Control™ feature,these cameras
offer a host of outstanding features such as ATW pro,Turbo
AGC™ and Aperture Control,making them ideal choices for
demanding CCTV applications.
The triple multiplexing power supply capability of the
SSC-DC10P and the AC Line Lock feature on the
SSC-DC14P/DC18P make camera installation and
synchronization remarkably easy and simple.
Sony Hyper HAD CCD technology delivers outstanding picture quality with
Sony Hyper HAD CCD technology delivers outstanding picture quality with
440,000 effective elements. In addition, newly developed
440,000 effective elements. In addition, newly developed
Turbo AGC (Auto Gain Control) drastically improves sensitivity
Turbo AGC (Auto Gain Control) drastically improves sensitivity
SSC-DC10P
SSC-DC14P
SSC-DC18P
The SSC-DC10P/DC14P/DC18P cameras incorporate a densely packed 1/3-inch IT (Interline Transfer) Hyper HAD™
(Hole Accumulated Diode) CCD sensor. With 440,000 effective picture elements,the SSC-DC10P/DC14P/DC18P
deliver an outstanding 470TV lines of horizontal resolution. This highly advanced Sony Hyper HAD sensor offers
remarkably high sensitivity by precisely locating a microlens over each pixel, converging available light onto the
photosensitive layer. Even in minimal lighting condition,the SSC-DC10P/DC14P/DC18P cameras produce pictures with
sufficient contrast and excellent colour fidelity. Also,HAD sensor™ technology ensures an excellent signal-to-noise
ratio of 50dB.
ADVANCED TURBO AGC, A NEW DEVELOPMENT BY SONY
ADVANCED TURBO AGC, A NEW DEVELOPMENT BY SONY
The SSC-DC10P/DC14P/DC18P cameras are equipped with the new Turbo AGC (Auto Gain Control) function,which
improves sensitivity more flexibly and effectively than conventional AGC because Turbo AGC can control video gain in a
range that is 6dB wider than the AGC range. Thus a subject under very low illumination can be distinguished more clearly.
AGC OFF
AGC ON
TURBO AGC ON
Page 3
Sony digitally-controlled Smart Control delivers clear, sharp images even
Sony digitally-controlled Smar t Control delivers clear, sharp images even
in unfavourable light conditions by automatically controlling
in unfavourable light conditions by automatically controlling
“Iris, Gain and White Balance” simultaneously
“Iris, Gain and White Balance” simultaneously
FULL AUTOMATIC BACKLIGHT
FULL AUTOMATIC BACKLIGHT
COMPENSATION (BLC)
COMPENSATION (BLC)
One of the biggest problems in security surveillance operations is strong
backlight which can put the subject into shadow. Of course, surveillance is
meaningless if the subject cannot be clearly identified.
Sony Smart Control,a newly developed digital light level control feature,
overcomes this problem by automatically controlling Iris and Gain with
optimum balance, utilizing highly reliable Sony digital signal processing
technology. Smart Control enables the SSC-DC10P/DC14P/DC18P cameras
to always obtain a clear image with a suitable light level in any situation and
at any time,regardless of changes in incoming light levels such as day to night.
Compared with conventional analogue signal processing cameras which control
Iris and Gain separately, the SSC-DC10P/DC14P/DC18P cameras deal with
these factors more intelligently, ensuring that backlight compensation is
accomplished far more effectively.
Smart Control works flexibly wherever an object appears in the picture
because these cameras sense the entire area of the frame and measure the
average light level. This represents a distinct advance in the measurement of
picture light levels.
Smart Control allows the operator to install the SSC-DC10P/DC14P/DC18P
cameras without any adjustment of light level - another compelling reason for
choosing these cameras for various surveillance and security applications.
ACCURATE COLOUR REPRODUCTION
ACCURATE COLOUR REPRODUCTION
WITH ADVANCED
WITH ADVANCED ATW PR O
ATW PRO
LENS CCD AGC
Iris
Fuzzy
Iris Gain
There is flexibility in the choice of auto iris
lenses:the SSC-DC10P/DC14P/DC18P cameras
accept both Video type (ALC) and DC type
(Non ALC) auto iris lenses. Selection is easily
made using the AUTO IRIS select switch. For
backlight applications,to fully utilize Smart
Control capabilities,the DC type auto iris lens is
recommended.
Video servo type
Lens Selection
A/D
Smart Control
White
Balance
Digital Circuit
Video
DC servo type
Smart Control incorporates a new type of Auto Tracing White Balance mode ,
ATW pro. This mode is ideal when lighting conditions change
frequently, and is particularly suited to applications where the operator needs to
see objects as they appear to the eye. The effective operational colour range is
2500K to 6000K.
The conventional ATW mode can also be selected. This mode
allows the operator to see objects as they appear during
Smart
Smart
Control
Control
is
is
activated
activated
daylight. The colour temperature compensation range
extends down to 2000K and up to 10,000K. This feature
ensures faithful and reliable colour reproduction in the most
varied picture circumstances. For example, this mode is
suitable for a picture of a parking area lit by high pressure
sodium lighting.
Auto iris lens selection
Even if someone is located in the corner of the picture or is moving, their identity can be distinctly captured.
Page 4
APERTURE SHARP MODE PROVIDES CRISPER,
APER TURE SHARP MODE PROVIDES CRISPER,
SHARPER IMAGES
SHARPER IMAGES
Aperture Sharp Mode makes object outlines sharper in the reproduced picture. This mode is ideal for situations where the
object merges into the scene with a similar colour shade. This feature is also effective when a VCR is connected because
sharp,crisp images can be recorded. SHARP or NORMAL mode can be selected.
THE CCD IRIS FUNCTION IMPROVES RELIABILITY AND
THE CCD IRIS FUNCTION IMPROVES RELIABILITY AND
PICTURE MOTION CAPTURE
PICTURE MOTION CAPTURE
As the scene illumination level increases,the SSC-DC10P/DC14P/DC18P cameras respond by automatically controlling the
exposure time of the photosensors. This is achieved by changing the electronic shutter speed of the CCD,in the range of
1/50 of a second to 1/100,000 of a second. The CCD IRIS function is also digitally controlled by the advanced Sony Smart
Control feature. The control of incoming light by the CCD IRIS function is completely electronic and does not require a
conventional mechanical iris control facility inside the camera. This means that reliability is greatly enhanced. An added
benefit to CCD IRIS function is when the information is achieved onto video tapes. Because of the increased shutter speed,
clear still images can be obtained when the tape is reviewed. This facilitates identification of vehicle numbers,etc.
Motion Resolution improved by CCD IRIS Function
<Rotating roulette>
CCD IRIS OFF
– illegible numbers
SSC-DC10P Side view Rear view
MODE selection switch (A/B)
DC12V ON/OFF switch
Auto iris lens
connection
Lock screw for frange-back adjustment
Camera mounting
adaptor
Auto iris lens
selection switch
AGC ON/OFF switch
AGC selection switch
(TURBO/NORMAL)
BLC ON/OFF switch
CCD IRIS ON/OFF switch
White balance selection switch
(ATW pro/ATW)
Aperture level selection switch
(SHARP/NORMAL)
CCD IRIS ON
– legible numbers
MODE A
DC input/VS
sync input/video
output connector
MODE B
Video output
connector
MODE A
Monitor output
connector
MODE B
VS sync input
connector
DC 12V screw
terminals
H (horizontal) PHASE
adjustment screw (+/–)
VIDEO LEVEL
adjustment screw (+/–)
Page 5
SIMPLE SINGLE CABLE WIRING (SSC-DC10P ONLY)
SIMPLE SINGLE CABLE WIRING (SSC-DC10P ONLY)
The SSC-DC10P features optional Triple Multiplexing operation. With only a single coaxial cable , the video and sync
signals can be transmitted together with DC power from the optional YS-W150P/W250P Camera Adaptors. The
camera can be operated up to 600m from these adaptors by using an RG-11A/U (7C-2V) coaxial cable. Since the
SSC-DC10P has a connector for MONITOR OUT function, the picture can be easily checked at the installation point
with a portable monitor. Of course, the SSC-DC10P also operates from a local DC 12V power source using a
commercially available power supply adaptor.
EXTERNAL SYNCHRONIZATION
EXTERNAL SYNCHRONIZATION
SSC-DC10P
The SSC-DC10P also accepts VS (Video and Sync) or composite sync signals so that a number of cameras can be
synchronized.Thus when controlled by a video switcher, camera outputs can be switched without any picture
disturbance.
SSC-DC14P/18P
The SSC-DC14P/18P feature AC Line Lock for external synchronization. The SSC-DC14P operates from 24V AC
while the SSC-DC18P operates from a 220 to 240V AC power source . Using the AC power frequency (50Hz) as the
vertical sync reference provides roll-free switching in multi-camera installations.In addition, as the SSC-DC14P/DC18P
have an externally adjustable Vertical Phase (±90°) control,completely accurate synchronization can be attained.
HIGH RELIABILITY,HIGH DURABILITY MECHANISM
HIGH RELIABILITY,HIGH DURABILITY MECHANISM
C OR CS-MOUNT LENSES CAPABILITY
C OR CS-MOUNT LENSES CAPABILITY
MODERN AND COMPACT DESIGN
MODERN AND COMPACT DESIGN
SSC-DC14P/DC18P Side view Rear view
Lock screw for frange-back adjustment
Video out
Ground terminal
AC 24V, 50Hz screw
terminals
SSC-DC14P
VIDEO LEVEL
adjustment (L/H)
V (vertical phase)
screw (+/-)
Auto iris lens
connection
Camera mounting
adaptor
Auto iris lens
selection switch
Sync selection switch (LL/INT)
AGC ON/OFF switch
AGC selection switch
(TURBO/NORMAL)
BLC ON/OFF switch
CCD IRIS ON/OFF switch
White balance selection switch
(ATW pro/ATW)
Aperture level selection switch
(SHARP/NORMAL)
Video out
SSC-DC18P
VIDEO LEVEL
adjustment (L/H)
V (vertical phase)
screw (+/-)
Page 6
TYPICAL SY STEM
TYPICAL SYSTEM
SSC-DC10P
1. Single camera operation
(a) Mode A : Triple multiplexing operation
(b) Mode B : DC 12V operation
2. Multiple camera operation
SSC-DC10P
SSC-DC10P
SSC-DC10P
SSC-DC10P
Digital
Digital
Digital
Digital
DC POWER,
SYNC,VIDEO
(Coaxial cable)
DC POWER,
SYNC,VIDEO
(Coaxial cable)
DC POWER,
SYNC,VIDEO
(Coaxial cable)
DC POWER,
SYNC,VIDEO
(Coaxial cable)
SSC-DC10P
Digital
SSC-DC10P
Digital
DC 12V
power supply
DC 12V
YS-W250P
AC outlet
MONITOR OUT
Portable Monitor
(Coaxial cable)
DC POWER,
SYNC,VIDEO
FDM-030
YS-W150P
VIIDEO OUT
(Coaxial cable) (Coaxial cable)
AC outlet
Colour Video Monitor
VIDEO OUT
(Coaxial cable)
AC outlet
VIDEO
OUT
(Coaxial
cable)
(ex.SSM-20N1E)
Sequential Switcher
(ex.YS-S104)
EXT
TIMING
IN
(Coaxial
cable)
SWITCH
OUT
Time Lapse VCR
(ex.SVT-5050P)
SEQUENTIAL
MONITOR OUT
(Coaxial cable)
VIDEO
IN
SPOT
MONITOR
OUT
(Coaxial cable)
VIDEO OUT
(Coaxial cable)
Colour Video Monitor
(ex.SSM-20N1E)
Colour Video Monitor
(ex.SSM-20N1E)
Colour Video Monitor
(ex.SSM-20N1E)
SSC-DC14P/DC18P
1. Single camera operation
2. Multiple camera operation
SSC-DC18P
Digital
SSC-DC18P
Digital
SSC-DC14P
Digital
SSC-DC14P
Digital
SSC-DC14P
AC 24V
power supply
SSC-DC18P
AC outlet
AC outlet
Digital
Digital
AC outlet
VIDEO OUT
(Coaxial cable)
VIDEO OUT
(Coaxial cable)
VIDEO OUT
(Coaxial cable)
VIDEO OUT
(Coaxial cable)
VIDEO OUT
(Coaxial cable)
AC outlet
VIDEO OUT
(Coaxial cable)
TIMING IN
(Coaxial cable)
Colour Video Monitor
(ex.SSM-20N1E)
Colour Video Monitor
(ex.SSM-20N1E)
Sequential
Switcher
(ex.YS-S104)
EXT
SWITCH
OUT
Time Lapse VCR
(ex.SVT-5050P)
SEQUENTIAL
MONITOR OUT
(Coaxial cable)
VIDEO IN
AC 24V
power supply
SPOT MONITOR OUT
(Coaxial cable)
VIDEO OUT
(Coaxial cable)
AC outlet
Colour Video Monitor
(ex.SSM-20N1E)
Colour Video Monitor
(ex.SSM-20N1E)
Page 7
Optional Accessories
YS-W150P/W250P Camera Adaptors
The YS-W150P/W250P Camera Adaptors are designed
to transmit power and video/sync signals between the
YS-W150P/W250P and the camera using a single
coaxial cable.The YS-W150P is for use in a single
camera configuration while the YS-W250P is used in
configurations of up to four cameras.Both units have
two camera outputs for each camera input,allowing
the camera picture to be monitored in two locations.
The YS-W150P/W250P not only accept VS sync signal
but also feature AC line lock for external
synchronization.Cable runs of up to 600m (1968ft)
using RG-11A/U(7C-2V) cable is possible.
YS-W150P
YS-W150P Rear Panel
Lenses
1) Auto-iris
Type
(DC Servo type)
Models VCL-3V8WEAP VCL-S02WEAP VCL-S04WEAP
Mount CS CS CS
Focal length 3.5 to 8.0mm 2.8mm 4.0mm
Iris control Auto Auto Auto
Maximum aperture ratio 1: 1.8 1: 1.3 1: 1.4
Maximum object distance 0.2m 0.2m 0.2m
Filter size M30.5 x 0.5mm M30.5 x 0.5mm M30.5 x 0.5mm
Mass 70g (2 oz) 41g (1.4 oz) 75g (3 oz)
Dimensions 42.0 x 52.0 x 47.0 mm 32.0 x39.8 x 33.0 mm 42.0 x39.8 x 33.0 mm
(dia. x H x L) (1 11/16 x 2 1/8 x 1 7/8 inches) (1 5/16 x 1 5/8 x 1 5/16 inches) (1 11/16 x 2 1/8 x 1 7/8 inches)
Cable length 260mm (10 1/4 inch) 310mm (12 1/4 inch) 260mm (10 1/4 inch)
Models TG2813FCS TG0412FCS-3 TG0812FCS-3
Mount CS CS CS
Focal length 2.8mm 4.0mm 8.0mm
Iris control Auto Auto Auto
Maximum aperture ratio 1 : 1.3 1 :1.2 1 : 1.2
Filter size M30.5 x 0.5mm M30.5 x 0.5mm M30.5 x 0.5mm
Mass 41g (1.4 oz) 38g (1.3 oz) 39g (1.4 oz)
Dimensions
(dia. x H x L)
Note By computar By computar By computar
32.0 x 39.8 x 33.0mm 32.0 x 39.8 x 33.0mm 32.0 x 39.8 x 33.0mm
(1 5/16 x 1 5/8 x 1 5/16 inches) (1 5/16 x 1 5/8 x1 5/16 inches) (1 5/16 x 1 5/8 x 1 5/16 inches)
YS-W250P
YS-W250P Rear Panel
SSC-DC10P
SSC-DC14P/DC18P
2) Manual-iris
Type
Models T2616FICS-3 T0412FICS-3 T0812FICS-3
Mount CS CS CS
Focal length 2.6mm 4.0mm 8.0mm
Iris control Manual Manual Manual
Maximum aperture ratio 1 : 1.6 1 :1.2 1 :1.2
Filter size - M30.5 x 0.5mm M30.5 x 0.5mm
Mass 45g (1.6 oz) 68g (2.4 oz) 37g (1.3 oz)
Dimensions 34.5 x 34.7mm 32.0 x 33.0mm 32.0 x 33.0mm
(dia. x L)
Note By computar By computar By computar
Turbo
AGC
APERTURE
Turbo
AGC
APERTURE
(1 3/8 x 1 3/8 inches) (1 5/16 x 1 5/16 inches) (1 5/16 x 1 5/16 inches)
SSC-DC14P SSC-DC18P
Page 8
SSC-DC10P/DC14P/DC18P Specifications
Image device: 1/3-inch Interline Transfer Hyper HAD CCD
Picture elements: 752(H) x 582(V)
Sensing area: 3.3 x 4.4mm (1/3-inch)
Signal system: PAL standard
Scanning system: 625 lines, 2:1 interlace
Sync system: Internal or external with VS or VBS* Internal or external with AC line lock
Horizontal resolution: 470TV lines
Phase control: H phase adjustment (±0.25H) V phase adjustment (±90°)
Lens mount: C/CS mount adjustable
Minimum illumination**: 1.1 lx at F1.2 (30 IRE, Turbo AGC ON)
Aperture: Sharp/Normal switchable
Enhancer: 3H
Automatic gain control (AGC):
CCD IRIS control: ON/OFF switchable, 1/50 to 1/100,000 (second)
White balance: ATW pro/ATW switchable
Backlight compensation: Smart Control
Signal-to-noise ratio: More than 50dB (Weight ON, AGC OFF)
Video out: BNC, 1.0Vp-p, 75Ω, sync negative
Operating temperature: -10 to 50°C (14 to 122°F)
Storage temperature: -40 to 60°C (-40 to 140°F)
Power requirements: Supplied from YS-W150P/W250P or AC 24V, 50Hz AC 220 to 240V, 50Hz
DC 12V from DC 12V power supply adaptor
Power consumption: 4.0W supplied from YS-W150P/W250P or 3.0W at DC 12V 4.5W 5.5W
Mass: 430g (15 oz) 550g (1 lb 3 oz) 770g (1 lb 11 oz)
Auto iris lens type: DC/VIDEO servo type
Connectors: DC 12V terminals AC 24V terminals, VIDEO OUT (BNC)
Mode A (Triple multiplexing operation): VIDEO OUT (BNC), GND
DC IN/VS IN/VIDEO OUT (BNC), MONITOR OUT (BNC)
Mode B (DC 12V operation):VIDEO OUT (BNC), VS IN (BNC)
Supplied accessories: Lens connector, lens mount cap, operating instruction manual
Dimensions:
SSC-DC10P/DC14P/DC18P SSC-DC10P SSC-DC14P/18P
/4)
1
57 (2
70 (27/8)
/8)
3
9 (
110 (43/8)
121.2 (47/8)
*The Burst signal is not locked.
**The specifications for minimum illumination apply to all SSC-DC10P units, to SSC-DC14P units from serial number 401,201 onwards and to SSC-DC18P units from serial number 402,801 onwards.
SSC-DC14P and SSC-DC18P units with serial numbers lower than the those have the following minimum illumination performance.
1.2 lx at F1.2 (30 IRE, Turbo AGC ON)
1.9 lx at F1.2 (50 IRE, Turbo AGC ON)
13 lx at F1.2 (100 IRE, Turbo AGC ON)
SSC-DC10P SSC-DC14P SSC-DC18P
1.7 lx at F1.2 (50 IRE, Turbo AGC ON)
10 lx at F1.2 (100 IRE, Turbo AGC ON)
Turbo/Nor mal/OFF switchable
LENS (4-pin)
42
Pin DC servo
1 Control (-)
2 Control (+)
3 Drive (+)
4 Dr ive (-) (GND)(+)
1/4" UNC (20pitch)
/16)
5
32 (1
M2x4
130 (51/8)
141 (55/8)
Digital
53 (21/8)
Digital
31
49 (115/16)
32 (15/16)
1/4" UNC (20pitch)
32 (15/16)
/16)
5
32 (1
M2x4
Unit: mm (inch)
YS-W150P/W250P Specifications
Power requirements: AC 220 to 240V, 50Hz
Power consumption: 15W 48W
Operating temperature: –10°C to 50°C (14°F to 122°F)
Input connectors: CAMERA IN (BNC), SYNC IN (BNC) CAMERA IN 1 to 4 (BNC × 4), SYNC IN (BNC)
Output connectors:
VIDEO OUT (BNC × 2), SYNC OUT (BNC, Loop-through, 75Ω ON/OFF)
Synchronization: Internal or external with VS or AC line lock
Maximum cable length: 300m (984ft) using RG-59B/U (3C-2V)
Cable compensation: 3 steps (100/200/300m)
Mass: 1.9kg (4 lb 3 oz) 3.6kg (7 lb 15 oz)
Dimensions:
YS-W150P YS-W250P
YS-W150P YS-W250P
VIDEO OUT A: 1 to 4 (BNC × 4), VIDEO OUT B: 1 to 4 (BNC × 4)
SYNC OUT (BNC, Loop-through, 75Ω ON/OFF)
500m (1640ft) using RG-6A/U (5C-2V)
600m (1968ft) using RG-11A/U (7C-2V)
)
/4
3
1
212 (83/8
330 (13
)
)
(
44
)
/8
1
2
(
52
Features and specifications subject to change without notice.Sony is a registered trademark of Sony Corporation.
“Hyper HAD”, “HAD sensor”, “Smart Control” and “Turbo AGC” are trademarks of Sony Corporation.
1 2 3 4
424 (163/4
330 (13)
)
)
/4
3
1
(
44
/8)
1
52 (2
Unit: mm (inch)
Distributed by
Printed in Japan
MK4068OHB9701P1-015
©1997 Sony Corporation
Loading...