Page 1
SLV-SE100/SE200/SE250/SE300/
SE400/SE450/SX100/SX250
RMT-V257/V257A/V257B/V257C/V287
SERVICE MANUAL
AEP Model
SLV-SE100A1/A2/K,SE200V1/V2,
SE250B/D/P,SE300D1/D2,
SE400K,SE450B/D/K/P,
SX100K,SX250D
UK Model
SLV-SE200G/I,SE300G
East European Model
Russian Model
SLV-SE100K,SE400K,
SE450K,SX100K
(Except UK Model)
(UK Model only)
Photo : SL V -SE450D
RMT-V257B
Refer to the SERVICE MANUAL of VHS
MECHANICAL ADJUSTMENT
for
MECHANICAL ADJUSTMENTS. (9-921-647-11)
The abbreviations of SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250 contained in this service manual
are indicated when these models are common to all their corresponding models as given below.
Abbreviated models name
All models name
SLV-
SE100
SE100A1
SE100A2
SE100K
SE200
SE200G
SE200I
SE200V1
SE200V2
SE250
SE250B
SE250D
SE250P
SE300
SE300D1
SE300D2
SE300G
SE400
SE400K
SE450
SE450B
SE450D
SE450K
SE450P
SX100
SX100K
SX250
SX250D
SPECIFICATIONS
System
C
hannel coverage
SLV-SE100K,SE400K,SE450K,SX100K:
PAL (B/G, D/K)
VHF E2–E12, R1–R12
UHF E21–E69, R21–R69
CATV S1–S41, S01–S05
SLV-SE200G/I, SE300G:
PAL ( I)
VHF IA to IJ, SA10 to SA13 (SLV-SE200I only)
UHF B21 to B69
CATV S01 to S05, S1 to S20 (SLV-SE200I only)
HYPER S21 to S41 (SLV-SE200I only)
SLV-SE100A1/A2, SE200V1/V2, SE250D/P,
SE300D1/D2, SE450D/P, SX250D:
PAL ( B/G)
VHF E2 to E12
Canaux VHF italiens A to H
UHF E21 to E69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
SLV-SE250B,SE450B:
SECAM (L):
VHF F2 to F10
UHF F21 to F69
CATV B to Q
HYPER S21 to S41
PAL (B/G):
VHF E2 to E12
Canaux VHF italiens A to H
UHF E21 to E69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
RF output signal
UHF channels 21–69
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP: PAL/MESECAM 23.39 mm/s
NTSC 33.35 mm/s
(SLV-SE250B,SE450B only)
SECAM 23,39 mm/s (recording/playback)
M
ESECAM 23,39 mm/s (playback only)
LP*: PAL/MESECAM 11.70 mm/s
(playback only, except: SLV-SE200G/I, SE300G)
(recording/playback: SLV-SE200G/I, SE300G)
NTSC 16.67 mm/s (playback only)
(SLV-SE450B only)
SECAM 11,70 mm/s (recording/playback)
M
ESECAM 11,70 mm/s (playback only)
EP*: NTSC 11.12 mm/s (playback only)
(SLV-SE200G/I, SE250D/P, SE300D1/D2/G,
Maximum recording/playback time
Fast-forward and rewind time
SE450B/D/P, SX250D)
10 hrs. in LP mode (with E300 tape)
Approx. 3 min. (with E180 tape)
S MECHANISM
— Continued on next page —
VIDEO CASSETTE RECORDER
Page 2
Inputs and outputs
LINE-1 (TV)
i
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
SLV-SE250B/D/P, SE450B/D/P, SX250D:
DECODER/
SLV-SE300D1/D2:
DECODER/
SLV-SE300D1/D2/G:
LINE-2 IN
SLV-SE300G:
LINE-3 IN
tLINE-2 IN
21-pin
Video input: pin 20
Audio input: pins 2 and 6
tLINE-3 IN
21-pin
Video input: pin 20
Audio input: pins 2 and 6
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jack (1)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
21-pin
Video input: pin 20
Audio input: pins 2 and 6
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
18 W
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions
prox. 355 × 96 × 285 mm (w/h/d)
Ap
(Approx. 14 × 3 /
including projecting parts and controls
Mass
Approx. 3.6 kg (Approx. 7 lb 15 oz.)
71
8
× 11 /4 inches)
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to change without
notice.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
2. Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair . Point
them out to the customer and recommend their replacement.
4. Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
— 2 —
Page 3
TABLE OF CONTENTS
SERVICE NOTE
1. ERROR CODE INDICATION···········································4
1 GENERAL
Getting Started···········································································1-1
Step 1 : Unpacking ································································1-1
Step 2 : Setting up the remote commander ····························1-1
Step 3 : Connecting the VCR·················································1-2
Step 4 : Tuning your TV to the VCR ·····································1-2
Step 5 : Setting up the VCR with the Auto Set Up function··1-3
Step 6 : Setting the clock ·······················································1-4
Selecting a language ······························································ 1-5
Presetting channels ································································1-5
Changing/disabling programme positions ·····························1-6
Basic Operations········································································1-8
Playing a tape·········································································1-8
Recording TV programmes ···················································1-9
Recording TV programmes using the ShowView system ···1-10
Recording TV programmes using the timer ························1-11
Additional Operations ·····························································1-12
Playing/searching at various speeds ····································1-12
Setting the recording duration time ·····································1-12
Checking/changing/cancelling timer settings ······················1-12
Searching using the Smart Search function ·························1-13
Adjusting the picture ···························································1-14
Changing menu options ·······················································1-14
Editing with another VCR ··················································· 1-15
Additional Information ····························································1-15
Troubleshooting ···································································1-15
Index to parts and controls··················································· 1-16
2 DISASSEMBLY
2-1. CASE, FRONT PANEL BLOCK ASSEMBLY··············2-1
2-2. KK-22 BOARD (SE300, SE450B/D/P),
JK-179 BOARD (SE300) ················································2-1
2-3. REAR PANEL ·································································2-2
2-4. POWER BLOCK, MA-372 BOARD······························ 2-2
2-5. MECHANISM DECK·····················································2-3
2-6. INTERNAL VIEWS························································2-4
2-7. CIRCUIT BOARDS LOCATION···································2-5
3 BLOCK DIAGRAMS
3-1. OVERALL BLOCK DIAGRAM ····································3-1
3-2. VIDEO BLOCK DIAGRAM ··········································3-3
3-3. SERVO/SYSTEM CONTROL BLOCK DIAGRAM ·····3-5
3-4. AUDIO BLOCK DIAGRAM ··········································3-7
3-5. POWER BLOCK DIAGRAM·········································3-9
4 PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1. FRAME SCHEMATIC DIAGRAM································4-3
4-2. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS ············································4-5
• MA-372 (VIDEO, AUDIO, SERVO/SYSTEM
CONTROL, TUNER, POWER SUPPLY)
PRINTED WIRING BOARD ·························4-5
• MA-372 (1/10)(REC/PB HEAD AMP)
SCHEMA)TIC DIAGRAM ····························4-7
• MA-372 (2/10)(SECAM PROCESSOR)
SCHEMATIC DIAGRAM ······························4-9
• MA-372 (3/10)(VPD/PDC)
SCHEMATIC DIAGRAM ····························4-11
• MA-372 (4/10)(Y/C, AUDIO PROCESSOR)
SCHEMATIC DIAGRAM ····························4-13
• MA-372 (5/10)(SERVO/SYSTEM CONTROL)
SCHEMATIC DIAGRAM ····························4-15
• MA-372 (6/10)(USER CONTROL)
SCHEMATIC DIAGRAM ····························4-17
• MA-372 (7/10)(INPUT/OUTPUT)
SCHEMATIC DIAGRAM ····························4-19
• MA-372 (8/10)(C+ SWITCH)
SCHEMATIC DIAGRAM ····························4-21
• MA-372 (9/10)(TUNER)
SCHEMATIC DIAGRAM ····························4-23
• MA-372 (10/10)(POWER SUPPLY)
SCHEMATIC DIAGRAM ····························4-25
• JK-179 (LINE-2 IN)
PRINTED WIRING BOARD AND
SCHEMATIC DIAGRAM ····························4-27
• KK-22 (DIAL TIMER)
PRINTED WIRING BOARD AND
SCHEMATIC DIAGRAM ····························4-27
• POWER SUPPLY BLOCK
PRINTED WIRING BOARD ·······················4-28
• POWER SUPPLY BLOCK
SCHEMATIC DIAGRAM ····························4-29
5 INTERFACE, IC PIN FUNCTION
DESCRIPTION
5-1. SYSTEM CONTROL — VIDEO/RP BLOCK
INTERFACE (MA-372 BOARD IC162) ························5-1
5-2. SYSTEM CONTROL — SERVO PERIPHERAL
CIRCUIT INTERFACE (MA-372 BOARD IC162) ·······5-1
5-3. SYSTEM CONTROL — MECHANISM BLOCK
INTERFACE (MA-372 BOARD IC162) ························5-2
5-4. SYSTEM CONTROL — SYSTEM CONTROL
PERIPHERAL CIRCUIT INTERFACE
(MA-372 BOARD IC162)···············································5-2
5-5. SYSTEM CONTROL — AUDIO BLOCK INTERFACE
(MA-372 BOARD IC162)···············································5-2
5-6. SERVO/SYSTEM CONTROL MICROPROCESSOR
PIN FUNCTIONS (MA-372 BOARD IC162)················5-3
5-7. MODE CONTROL PIN FUNCTIONS
(MA-372 BOARD IC420)···············································5-5
6 ADJUSTMENTS
6-1. MECHANICAL ADJUSTMENTS ·································6-1
6-2. ELECTRICAL ADJUSTMENTS ···································6-1
2-1. PREPARATION BEFORE ADJUSTMENT···················6-1
2-1-1.Equipment Required ························································6-1
2-1-2.Equipment Connection ····················································6-1
2-1-3.Set-up of Adjustment······················································· 6-1
2-1-4.Alignment Tape ·······························································6-1
2-1-5.Input/Output Levels and Impedance ·······························6-2
2-1-6.Adjustment Sequence ······················································6-2
2-2. POWER SUPPLY CHECK ·············································6-2
2-2-1.Output Voltage Check (MA-372 Board) ·························6-2
2-3. SERVO SYSTEM CHECK ·············································6-3
2-3-1.RF Switching Position Adjustment (MA-372 Board) ·····6-3
2-4. AUDIO SYSTEM ADJUSTMENT·································6-3
2-4-1.Normal Audio System Adjustment ··································6-3
2-4-2.ACE Head Adjustment ····················································6-3
2-4-3.E-E Output Level Check ·················································6-3
2-4-4.Frequency Response Check·············································6-3
2-5. ADJUSTING PARTS LOCATION DIAGRAM ·············6-4
7 REPAIR PARTS LIST
7-1. EXPLODED VIEWS ······················································7-1
7-1-1.FRONT PANEL AND UPPER CASE SECTION ··········7-1
7-1-2.CHASSIS SECTION·······················································7-2
7-1-3.MECHANISM DECK SECTION-1 ·······························7-3
7-1-4.MECHANISM DECK SECTION-2 ·······························7-4
7-1-5.MECHANISM DECK SECTION-3 ·······························7-5
7-2. ELECTRICAL PARTS LIST ··········································7-6
— 3 —
Page 4
SERVICE NOTE
1. ERROR CODE INDICATION
• Error codes are indicated using the lower 5 digits in the fluorescent display tube.
“At this time, Colon “:” between character is not indicated.”
Mode code indication when the error has occurred.
Error code
ERROR CODE
0 No error
1 Cam encoder error Loading direction
2 Cam encoder error Unloading direction
3 T reel error
4 S reel error
5 Capstan error
6 Drum error
7 Error on initializing
8 Cassette loading error
9 Reserve
MODE CODE
0 Power-on eject 10 FWD x1 20 REW play
1 Power-on initial 11 FWD x2 21 Cas. loading
2 Power-off eject 12 CUE 22 Tape loading
3 Power-off stop 13 PB-pause 23 Power-off loading
4 FF 14 RVS-pause 24 Mecha. error (Power on)
5 REW 15 RVS x1 25 Power-on eject initial
6 REC 16 RVS x2 26 Power-off eject initial
7 REC- pause 17 REV 27 APC REC
8 Power-on stop 18 Power-off initial 28 Cas. loading
9 PB 19 Mecha. error (Power off) (No auto PB check)
— 4 —
Page 5
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SECTION 1
GENERAL
This section is extracted from instruction
manual. (SLV-SE100K/SX100K/SE400K/
SE450K model)(3-868-344-11)
1-1
Page 6
1-2
Page 7
1-3
Page 8
1-4
Page 9
1-5
Page 10
1-6
Page 11
1-7
Page 12
1-8
Page 13
1-9
Page 14
1-10
Page 15
1-11
Page 16
1-12
Page 17
1-13
Page 18
1-14
Page 19
1-15
Page 20
1-16
Page 21
1-17
Page 22
MEMO
1-18E
Page 23
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SECTION 2
DISASSEMBLY
NOTE: Follow the disassembly procedure in the numerical order given.
2-1. CASE, FRONT PANEL BLOCK ASSEMBLY
6 Panel block assembly
(Engaged by the hook.)
Hooks
Hooks
1 T apping screw
4 Connector
3 Upper case
2 Tapping screw
5 Connector
Hooks
Hooks
2-2. KK-22 BOARD (SE300, SE450B/D/P), JK-179 BOARD (SE300)
5 T wo screws
6 JK-179 board
7 Pin jack cover
Front panel assembly
(B2.6 × 8)
2 KK-22 board
4 Dial timer escutcheon
3 Dial timer knob
1 Two screws
(B2.6 × 8)
2-1
Page 24
2-3. REAR PANEL
r
2 Rear panel
(Engaged by the hook.)
Hooks
Hooks
Hooks
1 POWER code stoppe
2-4. POWER BLOCK, MA-372 BOARD
4 T wo screws
(Sumitite (B3) +BV)
5 T wo screws
(Sumitite (B3) +BV)
2 T wo screws
3 Power block
6 MA-372 board with
mechanism deck
1 One connector
2-2
Page 25
2-5. MECHANISM DECK
4 Screw
(BVTP 3 × 12)
0 Mechanism deck
3 Three connectors
6 T wo screws
(BVTP 3 × 12)
2 Screw
(BVTP 3 × 12)
1 Flexible board
5 MD base (R)
9 MA-372 board
8 MD base (M)
7 MD base (R)
2-3
Page 26
2-6. INTERNAL VIEWS
— T op View —
M901
Drum Assembly
DZH-78E-R 1-772-359-11 (SE100A1/A2/K,SE200V1/V2,SE250B,SX100K)
DZH-92D-R 1-772-361-11 (SE200G/I,SE250D/P,SE300D1/D2/G,SX250D)
DZH-93D-R 1-772-362-11 (SE400K,SE450B/D/K/P)
ACE head block assembly
A-6775-791-A
FE head
1-500-144-11
— Bottom View —
Reel (S) table
3-977-507-01
Pinch press block assembly
A-6759-863-B
FL complete assembly
A-6759-619-B
Reel (T) table
3-977-508-01
M902
DC motor (capstan)
1-698-971-11
M903
Cam motor assembly (LOADING)
X-3947-577-1
2-4
Rubber belt
3-977-510-01
Page 27
2-7. CIRCUIT BOARDS LOCATION
JK-179 (SE300)
(LINE-2 IN)
MA-372
VIDEO, AUDIO,
SERVO/SYSTEM CONTROL,
TUNER, POWER SUPPLY
POWER BLOCK
KK-22 (SE300, SE450B/D/P)
(DIAL TIMER (PUSH/TURN))
2-5
Page 28
MEMO
2-6E
Page 29
3-1. OVERALL BLOCK DIAGRAM
(SEE PAGE 4-7,9,11,13,15,17,19,21,23,25)
IC200
PROCESSOR
PB Y/C
REC Y/C
C SYNC
IC350
HEAD
SW
T380,Q380
BIAS
ERASE
OSC
EXCEPT
SE100,SE200,
SE400K,SE450K,
SX100K MODEL
SE300
MODEL
SP
CH 1
SP
CH 2
LP
CH 1
LP
CH 2
EXCEPT
SE100,SE200,
SE400K,SE450K,
SX100K MODEL
SE300
MODEL
NORMAL
AUDIO
VIDEO
HEAD
REC/
PB
ERASE
HEAD
FULL
ERASE
HEAD
CN500
VIDEO
IN
CN500
LINE 1
IN
CN570
LINE 3
IN
J481
LINE 2
IN
CN500
AUDIO
IN
CN500
LINE 1
IN
CN570
LINE 3
IN
J481
LINE 2
IN
MA-372 BOARD
V IN
20
V IN
20
JK-179
BOARD
FRONT VIDEO
(SEE PAGE 4-27)
A (L)
6
A (R)
2
A (L)
6
A (R)
2
JK-179
BOARD
FR (L)
(SEE PAGE 4-27)
A HEAD PB
A HEAD REC
16
IC260
VIDEO
REC/PB
AMP
SECTION 3
BLOCK DIAGRAMS
BUFF
(1/2)
Y/C
EXCEPT
SE100,SE250P,SE400K,
TU VIDEO
Q VD
IIC DATA
IIC CLK
SE250,SE300,SE450B/D/P,
SX250D MODEL
IC580
C+
SWITCH
IC200
AUDIO
PROCESSOR
IC162
OSD
SE450P,SX100K
MODEL
VPS/
PDC
IC850
SE250B,SE450B MODEL
IC970
SECAM
PROC.
L1 (L)
TU M
DEC/VTR
SE100,SE200,SE400K,
SE450K,SX100K MODEL
(2/2)
(1/2)
IIC DATA
IIC CLK
SE100,SE200,SE400K,
SE450K MODEL
JS581
JS580
EXCEPT
SE100,SE400K,SX100K
MODEL
AV
LINK
JS582
V OUT
A (L) OUT
AV LINK
AV CONT
AV
CONT
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
(2/2)
IC162
SYSTEM
CONTROL
19
CN500
3
LINE 1
OUT
10
8
CN570
LINE 3
19
OUT
EXCEPT
SE100,SE200,
SE400K,SE450K,
SX100K MODEL
VHF/
UHF
IN
OUT
MOD V
TU700/701
MOD A
TU VIDEO
TU M
IIC DATA
IIC CLK
DRUM
SERVO
CAPSTAN
SERVO
D VS
D PG
D FG
CAP VS
CAP FG
CTL REC/PB
IC130
SIGNAL
CONTROL
AFT
AV CONT
AV LINK I/O
Q VD
IIC DATA
IIC CLK
DEC/VTR
CAM +,-
MODE1-4
T REEL FG
S REEL FG
T SENS
S SENS
T/S LED
REMOTE
FLD SDA/CS
PH100
T REEL
PH101
S REEL
Q102
LED
DRIVE
Q101
T SENS
Q100
S SENS
LOADING
MOTOR
SW12V
D100
(T/S LED)
IC460
REMOTE
CONTROL
RECEIVER
IC420
DRIVE
IC161
EEPROM
FUNC KEY 1
S460-464
FUNCTION
KEY
IC160
POWER
FAIL DET
RESET
PULSE GEN
FUNC KEY 2
S470,471,473,474,476,477
S478 (SE300)
FUNCTION
KEY
DRUM MOTOR
CAPSTAN MOTOR
CAPSTAN
+F -F
FL
JK-179 BOARD
(SEE PAGE 4-27)
SE300 MODEL
KK-22 BOARD
(SEE PAGE 4-27)
SE300,SE450B/D/P MODEL
M901
DRUM
M
MOTOR
DRUM
PG
DRUM
FG
M902
CAPSTAN
M
MOTOR
FG
ROTAR Y
SWITCH
ND420
FLUORESCENT
INDICAT OR TUBE
S481,482
FUNCTION
KEY
S401
DIAL TIMER
PUSH/TURN
M
CTL
AMP
M903
LOADING
MOTOR
3-1 3-2
Page 30
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
3-2. VIDEO BLOCK DIAGRAM
CN480
Q501,502
CONT
Q800-804
Q540
1
PB
PB
PB
PB
(SEE PAGE 4-7,9)
LINK
AV
AV
AV CONT
TO AV LINK
FROM AV LINK
I CONT IC162 25
C+ DET IC162
FROM
TUNER
BLOCK
SE250,SE300D1/D2,SE450B/D/P,
SX250 MODEL ONLY
CN501
1
VIDEO REC/PB AMP
COMP
HA
CONT
REC
AGC
DET
REC
AGC
IC260
TU701
IC260
1
12
9
DET
COMP OUT
REC
IC162
21
IC162
73
85
IC162
60
24
TU VIDEO
C SYNC
RF ENV
ENV
PB RF
HA SWP
RF SWP
REC C
ATT
REC Y RF
REC H
REC CUR ADJ
TRICK H
TO/FROM
SYSCON
BLOCK
(SEE PAGE 3-5)
IC200
ql
H
5
6
7
2
3
4
10
9
11
4.4Vp-p
40
38
36
34
29
19
1
IC200 5 REC
0.1µsec/div
CLP
CLP
CLP
CLP
CLP
FM
AGC
470mVp-p
C200 es,eh REC
H
IC200
Y/C PROCESSOR
R
P
PB
EQ
IC200
(1/2)
LPF
2
SE250B,SE450B
MODEL ONLY
CN500
LINE 1
IN
CN570
LINE 3
IN
EXCEPT
SE100,SE200,
SE400K,SE450K,
SX100K MODEL
CNJ500
VIDEO
IN
SE300
MODEL ONLY
J481
LINE 2
IN
DRUM
VIDEO
HEAD
SP
CH1
SP
CH2
LP
CH1
LP
CH2
CHECK
PIN
MA-372 BOARD
EXCEPT
SE100,SE400K,SX100K
MODEL
AV CONT
8
AV LINK
10
V IN
20
I
16
R
15
G
11
B
7
B
7
G
11
R
15
I
16
C+ DET
8
V IN
20
R
MODEL ONLY
JK-179 BOARD
FRONT VIDEO IN
(SEE PAGE 4-27)
6
5
4
5
3
2
1
2
1
2
5
CN261
CN262
PB RF
RF SWP
AV ADJ
16
19
24
21
17
22
CN262 1 PB RF
CN260 7 PB
1.0Vp-p
SW1
SW2
6dB AMP
SW3
6dB AMP
IC200
wg
REC
H
R
P
C
Q200
4 6
AMP
REC
280mVp-p
H
Q204
SECAM
SW
SW
SYNC
SEP
32
25
23
2.1Vp-p
2
5
96
REC H
28
REC CUR ADJ
100
TRICK H
IC200 wg PB
ACC
AMP
REC C
REC Y RF
Q510
BUFFER
V OUT
CN500
LINE 1
19
OUT
Q850
BUFFER
FROM
SYSCON
BLOCK
(SEE PAGE 3-5)
VIDEO
31
AGC
AGC
2.1Vp-p
H
ya
REC
IC200
H
R
FBC 1/2
P
Y/C
MIX
R
PIC
P
CONT
IC162
IC162
IC162
270mVp-p
CHARA
INS
R
P
72
71
13
IIC DATA
IC200
LPF
IIC CLK
Q VD
ya
6dB
AMP
KIL
B.D
PB
H
14
Q VD
270mVp-p
NAP BPF
YNR
RP
16 17
SERIAL
DECODER
INV
27
13
12
44 46 47
1H
DL
CLP
5361
1H/2H
55
DL
EXCEPT
SE100,SE250P,
SE400K,SE450P,
SX100K MODEL
BUFFER
42
CLK IN
AMP
LPF
BACK UP
SUB
COMV.
DOUBLE
IC200
AMP
LIM
9, 0
H
PB
SUB
BPF
500mVp-p
MAIN
COMV.
DEM
IC200 9, 0 REC
BPF2
SUB
LPF
H
R
P
520mVp-p
BPF1
R
P
BGA-B
BGA-A
9 10
PB
PB
REC
BGA
KIL
REC
EQ
RF SWP
99
FM
MOD
C ROT
97
MAIN
EMPH.
EMPH.
A MUTE
95
N.L
DETAIL
ENH
Q201
DE
EMPH
P
R
DL
EQ
CLP
B
REC
APC
PA
VXO2
VCO
SLD
Q203
50
45PB-H
5259
63
69
70
65
62
60
Q202
Q202
BUFFER
4.43MHz
17
5
4
X200
CVBS
9
DAVN
SDA
SCL
IC850
VPS/PDC
Q661
BUFFER
Q973
BUFFER
Q975,976 Q970
SW
SE250E,SE300D1/D2,SE450B/D/P,
SX250 MODEL ONLY
Q541
BUFFER
IC162
OSD
59
PDC DAV IN
50
OSD V IN
56
C VIDEO IN
IC970
SECAM PROC
15
VIDEO IN
17
PB C
2
FSC
4.43
21
BELL
FILTER
Q974
BUFFER
IC200
IC200
IC200
yd
yd
REC
PB
H
yl
4.43MHz
16
11
27
13
H
CTL
REC C
C SYNC
PB RF
300mVp-p
300mVp-p
400mVp-p
MOD V
(1/3)
OSD V OUT
26DET
1
TU701
52
Q972
SW
TO
TUNER
6
BLOCK
(SEE PAGE 3-6)
Q660
BUFFER
BUFFER
SECAM DET
SECAM ON
V OUT
EXCEPT
SE100,SE200,SE400K,
SE450K,SX100K MODEL
SE250B,SE450B MODEL ONLY
IC162
86
TO/ FROM
SYSCON
IC162
BLOCK
67
(SEE PAGE 3-5)
CN570
LINE 3
19
OUT
CN262
2
V
RF SWP
25Hz
0.5Vp-p
5.0Vp-p
0.1µsec/div
IC260 0 REC
470mVp-p
280mVp-p
H
A MUTE IC162
C ROT
RF ENV
COMP OUT
HA SWP
RF SWP
ADJ SW
IC162
IC162
IC162
IC162
IC162
S467
63
15
8
TO/FROM
SYSCON
17
16
(SEE PAGE 3-5)
18
BLOCK
16
3-3 3-4
Page 31
3-3. SERVO/SYSTEM CONTROL BLOCK DIAGRAM
757Hz
4.6Vp-p
PS120
4.5Vp-p
(SEE PAGE 4-13,19)
IC162
SERVO CONTROL
77
DRUM ERR
90
DRUM PG
89
DRUM FG
76
CAP ERR
24
CAP RVS
87
CAP FG
95
CTL +
94
CTL -
IC130
LOADING
MOTOR DRIVE
2
CAM -
10
CAM +
TO/FROM
VIDEO
BLOCK
(SEE PAGE 3-3,4)
AUDIO
BLOCK
(SEE PAGE 3-7,8)
(2/3)
IN2
4
IC200
IC200
IC200
TO
M
HALL
DEVICE
M901
DRUM MOTOR
SW5V
HALL
DEVICE
M902
CAPSTAN
MOTOR
OUTPUT
OUTPUT
MATRIX
U+
VCC
UV+
VW+
W-
U
V
W
CAPSTAN
FG
VCC
VM
TL
PG
FG
S100
ENCODER
POSITION
CTL
CTL
HEAD
HEAD
CAM
MECHA
1
2
3
4
7
1
6
5
2
3
FOR
CHECK
M903
LOADING
MOTOR
M
MA-372 BOARD
MTR12V
CN101
1
D VS
2
IC162 o; DRUM PG
40msec
D PG
3
D FG
4
M12V
CN102
7
1
LIMITER
6
CAP VS
5
CAP RVS
2
CAP FG
3
IC162 ij CAP FG
CN350
7
6
CN262
CTL
4
CN104
1
2
3
MODE1
4
MODE2
3
MODE3
2
MODE4
1
D110
SW5VM12V
D6V
IC162 il DRUM FG
300Hz
T/S LED
og
CTL IN+ REC
IC162
25Hz
Q501,502
Q501,502
Q800-804
Q540
CN570
,IC850
16
,IC850
17
IC200
IC200
IC200
IC260
IC260
IC260
,IC260
99
Q972
IC970
Q591
Q580
D100
D161
D160
B
14
95
97
B
26
B
B
D5V
L160
L161
4.2Vp-p
D5V
5.0Vp-p
IC162
IC162 eh 32kHz (OUT)
AV CONT
TO AV LINK
FROM AV LINK
I CONT
8
C+ DET
5
IIC DATA
4
IIC CLK
A MUTE
C ROT
6
RF ENV
2
COMP OUT
3
HA SWP
4
RF SWP
SECAM ON
SECAM DET
A MUTE
DEC/VTR
Q VD
SW12V
17.734475kHz
el
(OUT)
L140
5
7
IC160
RESET
PULSE
GEN.
POWER
FAIL
DET.
PH100
T REEL
FG
PH101
S REEL
FG
Q101
TAKE END
SENSOR
Q100
SUPPLY END
SENSOR
5.0Vp-p
3.1Vp-p
S101
REC
PROOF
Q104
Q103C
6
8
Q102
LED
DRIVE
X160
17.734475MHz
X160
32.768kHz
MODE1
MODE2
MODE3
MODE4
SYSTEM CONTROL
37
VCC
99
AVCC
98
AMP VCC
34
RST
78
POWER FAIL
80
T REEL FG
79
S REEL FG
T SENS
7
S SENS
6
20
END LED
IN
38
OUT
39
32kHz IN35
36
32kHz OUT
97
CTL AMP OUT
30
REC PRF
33
CAM
29
MODE1
28
MODE2
27
MODE3
26
MODE4
21
AV CONT
73
TO AV LINK
85
FROM AV LINK
I CONT
25
AV COUT IN/C+ DET
60
IIC DATA
72
71
IIC CLK
13
Q VD
15
C ROT
8
RF ENV
17
ENV S
16
HA SWP
18
RF SWP
SECAM ON67
SECAM DET
86
63
A MUTE
58
DEC/VTR
IC162
IC162
IC162 rg
(EEP) IIC DATA
(EEP) IIC CLK
IC162
i;
450msec
ul
1.4sec
OSC CHARA (OUT)
23.3MHz
MTR 12V CONT
SW 12V CONT
(3/3)
TU AFT
TU SW1
TU SW2
T REEL
TAPE TOP PLAY
4.6Vp-p
S REEL
TAPE TOP PLAY
5.0Vp-p
FLD DATA
FLD CLK
FLD CS
REMOCON
KKP+
KKP-
FU KEY1
FU KEY2
OSC IN
OSC OUT
4.6Vp-p
-14V CONT
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
CN161
RESET
4
DATA
2
CLOCK
IC161
L660
R733
R731
5
6
EEPROM
EEPROM
SE100K,SE200V1/V2,
SE300G,SE400K,SE450K,
32
31
3
83
84
68
70
66
14
11
12
5
4
44
45
64
65
74
75
TU700/
TU701
EXCEPT
SE200G,SE300G
MODEL
EXCEPT
SX100K MODEL
SE100A1/A2 MODEL
ON PAL 4.43
MTR 12V CONT
SW 5V CONT
-11V CONT
C+SW 12V CONTC+5V CONT
IN
VHF/
UHF
OUT
23
AFT
19
SW1
20
SW2
3
SDA
12
SDA
5
SCL
11
SCL
IC460
REMOTE
1
CONTROL
RECEIVER
EXCEPT
S467
NTSC PB
ADJ SW CN262
POWER BLOCK
(SEE PAGE 3-10)
3
VIDEO
5
BLOCK
(SEE PAGE 3-4)
TO
13
15
12
TO
V OUT
MOD V
MOD A
M OUT
FL DRIVER
D IN
CLK
CS
D5V
IC420
LED
IRDREC
24
6
2
21
S1
S17
G1
G6
TU VIDEO IC200
MOD V CN500
MOD A IC580
TU M IC580
43
27
21
26
D420 (SE300,480)
19
S460,461,462
463,464
FUNCTION
KEY
POWER
EJECT
FUNCTION
KEY
KKP SW
40
TO/FROM
VIDEO
BLOCK
19
(SEE PAGE 3-4)
14
TO/FROM
AUDIO
BLOCK
1
3
(SEE PAGE 3-7,8)
ND420
VACUUM FLUORESCENT
INDICAT OR TUBE
TO
POWER BLOCK
S470,471,473
474,476,477
S478 (SE300,480)
F -F +
CHECK
3
SE300 ONLY
JK-179 BOARD
(SEE PAGE 4-27)
CN480CN501
S482
5
5
6
6
S481
POWER
EJECT
KK-22 BOARD
CN402
CN460
4
4
3
3
2
2
S410 (SE300,450,480)
DIAL TIMER
PUSH/TURN
SE300,SE450B/D/P MODEL
16
3-5 3-6
Page 32
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
3-4. AUDIO BLOCK DIAGRAM
MA-372 BOARD
TUNER BLOCK
(SEE PAGE 3-6)
(SEE PAGE 3-5)
(SEE PAGE 4-9,11)
SE250,SE300,SE450B/D/P,
FROM
FROM
SYSCON
BLOCK
TU701
SE100,SE200,SE400K,
SE450K,SX100K MODEL
IC162
SX250D MODEL
TU M
21
DEC/VTR
58
1
2
3
5
12
13
JS581
Q580 Q582
JS580
IC580
C+ SWITCH
11 9
SE100,SE200,SE400K.
SE450K MODEL
MOD A TU701
15
4
FROM
SYSCON
BLOCK
IC162
63
A MUTE
2
TO
TUNER BLOCK
(SEE PAGE 3-6)
EXCEPT
SE100,SE200,SE400K,
SE450K,SX100K MODEL
FL572
Q591
MUTEMUTE
A (L) OUT
A (R) OUT
EXCEPT
SE100,SE200,SE400K,
SE450K,SX100K MODEL
CN570
3
LINE 3
AUDIO
1
(SEE PAGE 3-5)
14
10
Q581
FL502
A (L) OUT
A (R) OUT
CN500
3
LINE 1
AUDIO
1
SE300
MODEL
J481
LINE2
AUDIO
EXCEPT
SE100,SE200,SE400K,
SE450K,SX100K MODEL
JK-179
BOARD
CN480 CN501
FR (L)
(SEE PAGE 4-27)
CN500
AUDIO
REC/PB
HEAD
AUDIO
ERASE
HEAD
LINE 1
IN
CN570
LINE 3
IN
33
6
2
6
2
4
3
1
A (L)
A (R)
A (L)
A (R)
CN350
FL500
FL570
IC350
HEAD
SW
(2/2)
IC200
AUDIO
PROCESSOR
A SW CTL 1
24
A SW CTL 2
26
EQREC
90
PB:
LP,SP
74
76
78
80
PB LOW OUT
98
AUTO
88
42
AUTO
BIAS
89
REC:EP,LP
PB:EP
87
94 93
92
91
86
P
R
ALC
REC
REC
LINE
AMP
VREF
MUTE
81
8385
FULL
ERASE
HEAD
T380,Q380
CN351
1
16
BIAS
ERASE
OSC
Q350
BIAS
SW
3-7 3-8
Page 33
3-5. POWER BLOCK DIAGRAM
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
POWER SUPPLY BLOCK
F001
L001,002
LINE
FILTER
CN001
AC
IN
16
RECT
Q101
SWITCHING
REG.
(SEE PAGE 4-29)
T101
POWER
TRANS
PC101
PHOTO
INTERRUPTER
D201
D301
D401
D601
L301
L401
CN101
MA-372 BOARD
(SEE PAGE 4-21,27)
SE250B,SE450B MODEL
TU700/701
IC970
22
L720 L721
L270
SECAM
VCC
D750
R711
IC200
Y/C PROC
AUDIO PROC
39
ALWAYS 5V
11
Y VCC
58
C VCC
56
CCD VCC
75
A VCC
IC260
VIDEO
R/P AMP
13
ALL 5V
PH100,101
T/S
REEL
Q100,101
T/S
SENSOR
7
L750
D607
D606
30V1630V
1
L701
D100
T/E LED
BB (5V)
5V
25
14
L160
L161
5V
(701 ONLY)
Q751,752
SW
19
20
4
L140
5
7
IC850
VPS/PDC
VDD D
VDD A
Q800-804
AV LINK
CIRCUIT
MB (5V)
L662
VCC2
VCC1
EEPROM
8
VCC
D140
Q103,104
SWITCH
IC160
RESET
PULSE
POWER
IC161
EXCEPT
SE100,
SE250P,
SE400K,
SE450K,
SX100K
MODEL
EXCEPT
SE100,
SE400K,
SX100K
MODEL
GEN.
FAIL
DET.
6
8
IC162
SERVO/SYSTEM
CONTROL
10
MODE CONT
65
SW5V CONT
64
MTR12V CONT
75
C+/SW12V CONT
74
-11V CONT
53
OSD VCC
37
VCC
99
AVCC
98
AMP VCC
34
RESET
78
P FAIL
MOTOR DRIVE
8
9
L460
IC130
LOADING
VCC1
VCC2
IC460
REMOTE
CONTROL
RECEIVER
3
VCC
IC420
FL DRIVER
1
VDD
44
VDD
16
VEE
17
VEE
ND420
FLUORESCENT
INDICA TOR TUBE
PS120
SW 5V
MTR 12V
D110
MTR 12V
MTR 12V
F-F+
CN102
CN101
1
7
1
M903
CAPSTAN
MOTOR
M901
DRUM
MOTOR
L975
+35V
5
CN600
5
PS603
Q720,721
SWITCH
SW 5V COUT
IC580
IC601
+13V
6
7
8
9
10
+13V
+13V
D+6V
D+6V
6
7
8
9
10
Q601,603
SE250,SE300,
SE450B/D/P,
SX250D MODEL
PS602
PS600
SWITCH
Q600,604,611
12V
REG
4
Q607,608
C+ VCC
SWITCH
5V
REG
T380,Q380
C+ 12V
21
ERASE
OSC
D603
OSD V
C+/SW 12V CONT
MTR 12V CONT
EXCEPT
SE250,SE300,SE450B/D/P,
SX250D MODEL
JS603
CC
L380
L580
Q612,613
SWITCH
MTR 12V
D+6V
D+6V
C+ 5V
SW 5V
L350
C+ 12V
SW 12V
SE250,SE300,SE450B/D/P,
SX250D MODEL
16
C+ SW
VCC
L205
L202
L203
L204
IC350
HEAD SW
1
VCC
-11V
11
11
PS601
L601
Q602,605,606
SWITCH
–11V
+F
–F
-11V CONT
3-9 3-10
Page 34
MEMO
3-12E
Page 35
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SECTION 4
PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING
BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is
printed in each block.)
(For printed wiring boards)
• b: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
• Through hole is omitted.
• Circled numbers refer to waveforms.
• There are few cases that the part printed on diagram
isn’t mounted in this model.
• Chip parts.
C
BE
(For schematic diagrams)
• All capacitors are in µF unless otherwise noted. pF : µµF.
50V or less are not indicated except for electrolytics and
tantalums.
• Chip resistors are 1/10W unless otherwise noted.
kΩ=1000Ω, MΩ=1000kΩ.
• Caution when replacing chip parts.
New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum capacitor, Because it is damaged by the heat.
• Some chip part will be indicated as follows.
Transistor Diode
5
64
2
13
5
46
2
31
45
2
31
12
4
53
3
21321321
Example C541 L452
22U 10UH
TA A 2520
Kinds of capacitor
Temperature characteristics
External dimensions (mm)
• Constants of resistors, capacitors, ICs and etc with XX indicate
that they are not used.
In such cases, the unused circuits may be indicated.
• Parts with ★ differ according to the model/destination.
Refer to the mount table for each function.
• All variable and adjustable resistors have characteristic curve B,
unless otherwise noted.
• Signal name
XEDIT→ EDIT PB/XREC → PB/REC
• 2 : non flammable resistor
• 1 : fusible resistor
• C : panel designation
• : internal component.
• U : B+ Line.
• V : B– Line.
• Circled numbers refer to waveforms.
• Readings are taken with a color-bar signal input.
• Voltage are dc between ground and measurement points.
• Readings are taken with a digital multimeter (DC10MΩ).
• Voltage variations may be noted due to normal production
tolerances.
• C : adjustment for repair.
• Circled numbers refer to waveforms.
When indicating parts by reference
number, please include the board name.
Note : The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
4-1
Page 36
MA-372 BOARD
(REC/PB BLOCK)
1
CN262 1 PB RF
IC260 7 PB
V
2
CN262 2 RF SWP
25Hz
3
IC260 9 REC
0.1µsec/div
4
IC260 0 REC
0.5Vp-p
5.0Vp-p
200mVp-p
9
IC200 es,eh REC
H
0
IC200 ya REC
0
IC200 ya PB
H
qa
IC200 yd REC
w;
qf
IC200 wg REC
1.0Vp-p
H
qf
IC200 wg PB
320mVp-p
H
H
2.3Vp-p
2.2Vp-p
IC162 ij CAP FG
757Hz
wa
IC162 og CTL IN+ REC
25Hz
ws
IC162 i;
T REEL
TAPE TOP PLAY
4.8Vp-p
5.0Vp-p
(SERVO/SYSTEM CONTROL
BLOCK)
qg
240mVp-p
IC162 eh 32kHz (OUT)
3.1Vp-p
wd
440msec
IC162 ul
5.0Vp-p
S REEL
TAPE TOP PLAY
H
(VIDEO BLOCK)
5
IC200 5 REC
0.1µsec/div
6
IC200 2 REC
H
7
T380 6 REC
300mVp-p
470mVp-p
300mVp-p
qa
IC200 yd PB
H
qs
IC200 ql
H
qd
IC200 9, 0 REC
H
qh
IC162 el
H
400mVp-p
300mVp-p
4.6Vp-p
460mVp-p
qj
IC162 rg
qk
IC162 o; DRUM PG
40msec
ql
IC162 il DRUM FG
17.734475kHz
(OUT)
OSC CHARA (OUT)
23.3MHz
5.6 Vp-p
5.6Vp-p
5.0Vp-p
1.4sec
wf
IC420 2 X OUT
3.3MHz
5.0Vp-p
3.3Vp-p
8
70kHz±10kHz
IC200 yl
4.43MHz
46Vp-p
410mVp-p
qd
IC200 9, 0 PB
300Hz
650mVp-p
H
5.0Vp-p
4-2
Page 37
4-1. FRAME SCHEMATIC DIAGRAM
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
B
C
D
E
F
B to B
6P
AN GND
FRONT AU IN
AU GND
POWER SW
EJECT SW
4P
KKP SW
KKP +
KKP -
4
11
10
9
8
7
6
5
4
3
2
1
1
2
3
4
5
6
4
3
2
1
MA-372 BOARD
RC
WRITING
RP
CHECK
M903
LOADING
MOTOR
M902
CAPSTAN
MOTOR
M
M
1
2
3
1
2
3
4
5
6
7
8
9
CN161
CN262
CN104
CN102
SW 5V
CAP RVS
CAP FG
CTL-REF
CAP VS
LIMITTER
MTR 12V
MTR GND
AN GND
1
CN600
11P
11
A
POWER
SUPPLY
BLOCK
3P
AC
AC IN
220-240V
50HZ
SE300 ONLY
JK-179
BOARD
KK-22
BOARD
SE300,SE450B/D/P ONLY
BOARD IN
6PCN480
1
FRONT VIDEO IN
2
AN GND
3
FRONT AU IN
4
AU GND
5
POWER SW
6
EJECT SW
BOARD IN
4P
CN402
KKP SW
4
KKP +
3
KKP -
2
D GND D GND
1
1
NC
2
AC
3
FR-81
(SE300 ONLY)
DI-58
(SE300,SE450B/D/P ONLY)
-11V
10
6V
9
6V
8
13V
7
13V
13V
6
5
35V
4
AU GND
3
AN GND
2
AN GND
1
AN GND
CN501
FRONT VIDEO IN
CN460
73265
1/10 REC/PB HEAD AMP
2/10 SECAM PROCESSOR
3/10 VPS/PDC
4/10 Y/C,AUDIO PROCESSOR
5/10 SERVO/SYSTEM CONTROL
6/10 USER CONTROL
7/10 INPUT/OUTPUT
8/10 C+ SWITCH
9/10 TUNER
4P
4
RESET
3
CLOCK
2
DATA
1
D GND
5P
5
AV ADJ
4
CTL
3
GND
RF SWP
2
1
PB RF
B to B
3P
1
CAM(-)
N.C.
2
3
CAM(+)
9P
B to B
1
2
3
4
5
6
7
8
9
8
6P
CN261
1
LP CH2 F
LP CH1,2 S
2
3
LP CH1 F
4
SP CH2 F
SP CH1,2 S
5
6
SP CH1 F
FAC-8
FE-138
FFM-36
7
6
5
4
3
2
1
1
2
3
1
2
3
4
5
CTL(X)
CTL(Y)
GND(AU)
GND(AU)
MTR 12V
MTR GND
CN350
A HEAD PB
A HEAD REC
A ERASE HEAD
FE HEAD
N.C.
GND(AU)
D VS
D PG
D FG
7P
3PCN351
5PCN101
10 129
6P
LP CH1,2 S
SP CH1,2 S
CTL(X)
CTL(Y)
GND(AU)
A HEAD(X)
A HEAD(Y)
GND(AU)
A ERASE HEAD
FULL ERASE(X)
FULL ERASE(Y)
LP CH2 F
LP CH1 F
SP CH2 F
SP CH1 F
MTR GND
MTR 12V
D VS
D PG
D FG
11
CTL
HEAD
AUDIO
HEAD
ERASE
HEAD
VIDEO HEAD
LP
CH2
LP
CH1
SP
CH2
SP
CH1
1
2
3
4
5
6
1
2
3
4
5
6
7
M
FULL
ERASE
HEAD
M901
DRUM
MOTOR
1
2
1
2
3
4
5
16
FRAME SCHEMATIC DIAGRAM
4-3 4-4
Page 38
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
MA-372 (VIDEO, AUDIO, SERVO/SYSTEM CONTROL, TUNER, POWER SUPPLY) PRINTED WIRING BOARD
MA-372 BOARD
D100 D-7
D100 H-3
D140 B-10
D424 A-3
D500 I-3
D504 I-3
D509 J-2
D511 I-4
D513 I-4
D515 J-4
D540 J-7
D542 I-6
D544 I-6
D571 I-5
D575 I-5
D576 I-6
D600 E-2
D601 E-2
D602 E-2
D603 F-2
D606 B-3
D607 B-13
D750 J-12
D751 J-12
IC130 B-3
IC160 B-13
IC161 C-12
IC162 C-10
IC200 F-9
IC260 I-10
IC260 I-10
IC420 A-8
IC460 A-5
IC580 I-11
IC601 G-2
IC970 H-5
Q100 E-11
Q101 E-3
Q102 D-6
Q103 B-10
Q104 B-10
Q200 H-7
Q201 G-8
Q202 E-8
Q204 H-7
Q270 I-8
Q271 J-9
Q350 H-10
Q380 H-9
Q501 I-3
Q502 I-3
Q510 I-4
Q510 I-4
Q540 I-6
Q541 I-6
Q580 G-12
Q581 H-12
Q582 H-12
Q583 I-11
Q600 E-2
Q601 G-2
Q603 F-3
Q604 E-2
Q605 E-2
Q606 D-2
Q607 F-1
Q608 G-2
Q611 E-2
Q612 F-2
Q613 F-2
Q660 D-9
Q661 D-11
Q702 G-12
Q720 C-1
Q721 D-1
Q750 J-12
Q751 H-12
Q752 H-12
Q800 C-9
Q801 C-8
Q802 C-9
Q803 C-8
Q804 C-9
Q850 F-11
Q970 G-5
Q971 H-5
Q972 F-5
Q973 G-5
Q974 F-5
Q975 G-5
Q976 G-5
There are few cases that the part printed on this diagram isn’t mounted in this model.
VIDEO, AUDIO, SERVO/SYSTEM CONTROL, TUNER, POWER SUPPLY
MA-372
4-6
Page 39
For schematic diagram
JK-179 (SE300)
(LINE-2 IN)
KK-22 (SE300, SE450B/D/P)
(DIAL TIMER (PUSH/TURN))
POWER BLOCK
MA-372
VIDEO, AUDIO,
SERVO/SYSTEM CONTROL,
TUNER, POWER SUPPLY
• Refer to page 4-2 for waveforms.
1
MA-372 BOARD(1/10)
REC/PB HEAD AMP(RP BLOCK)
A
B
C
XX MARK:NO MOUNT
VIDEO HEAD
LP CH2
LP CH1
SP CH2
SP CH1
SIGNAL PATH
D
CHROMA
REC
PB
*MARKED:MOUNT TABLE
E
16
F
C271
C272
IC260
R270
R272
R274
R276
SE450 B/D/K/P
SE400K
0.01u/50V B
0.01u/25V B
LA70011
560
2700
4700
8200
1
2
3
4
5
6
VIDEO SIGNAL
SE300 G/D1/D2,
SE250 B/D/P,
SE200 G,SX250D
CN261
LP CH2 F
LP CH1.2 S
LP CH1 F
SP CH2 F
SP CH1.2 S
SP CH1 F
1800
Y/CHROMAY
6P
XX
XX
LA70001
XX
5600
15k
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
1
2
3
4
5
6
SE200 V1/V2,
SE100 A1/A2,
SX100K
1200
JL265
JL264
JL263
JL260
JL261
JL262
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
4
L270
100uH
B+
732658
IC260
REC/PB HEAD AMP
C280
100u
C279
0.1u
C277
6.3V
R271
560
R270
IC260
*
5.0
ALL 5V
R272
JL273
*
B
XX
*
C271
*
C275
0.01u
C273
C270
C278
0.022u
B
B
XX
XX
C276
0.1u
C274
C272
R4.0/P0
R1.5/P2.0
R3.9/P2.0
R3.9/P0
R2.5/P0
B
R3.9/P2.0
XX
R1.0/P2.0
R1.0/P0
*
R2.5/P0
R1.0/P2.0
131415161718192021222324
PB ON
10k
REC OFF
PB OFF
H.SYNC
DET
AGC
VCC
AMP
CURRENT
AMP
BIAS
AMP
VCCVCC
AMP
CURRENT
BIAS
10k
EP OFF
SP OFF
REC
AMP
VCC
H
PB OFF
SW30
REC
AMP
SW30
L
1k
COMP
SP OFF
AGC
EP OFF
SP
EP
TO HA
ATT
HA
ENVELOPE
HA
CONT
H.SYNC
4
1
C286
R283
XX
R274
0
*
R276
C284
0.22u
0R273
R275
XX
Q270
XX
*
B
Q271
XX
R284
R285
0
XX
C287
XX
R3.6/P0
R4.3/P0.1
R3.5/P0
R3.5/P0
R0/P1.7
R0/P1.6
DET
0.3
R1.7/P2.1
0
R0/P0.5
R4.3/P4.4
123456789101112
R277
22k
R278
22k
R279
22k
C283
0.01u
C288
100p
B
C281
0.01u
B
C282
0.01u
B
3
CH
L271
2.2uH
C289
18p
C285
0.01u
10 129
B
R280
100k
1
JL270
JL271
11
CN262
5P
1
PB RF
RF SWP
2
GND
3
CTL
4
AV ADJ
5
FOR
CHECK
2
RECCUR
JL272
RECH
RECC
100R286
JL268
JL269
JL267
B+
RECYRF
PBRF
CSYNC
TRICKH
CTLCHK
LP/SP_
RFENV
RFSWP
HASW
COMPOUT
ADJSW
SW5V
ANGND
1
2
3
19
TO(4/10)
TO(5/10)
TO(6/10)
TO(10/10)
4-7 4-8
REC/PB HEAD AMP
MA-372 (1/10)
Page 40
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for printed wiring board.
A
B
C
D
1
MA-372 BOARD(2/10)
SECAM PROCESSOR(SE BLOCK)
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
C970
220p
CH
R970
33k
R971
33k
0
SYNC GATE
GEN./V-SEP
to MUTE
*
B+
IC970
MODE
CTL
to REC MUTE
to PB MUTE
1234567891011121314
0
4.43MHZ
0
C971 2.2u 50V
JL972
0.3
AFC
VCO
Filter Adj.
B
0
R0.1/P00
BGP
GEN
0
BC972 4700p
150k
R968
SECAM
DEF
CONTROL
LOGIC
FO
OFFSET
4
73265
8
109
(SE450B,SE250B ONLY)
CSYNC
SEDET
VIDEO
B+
L975
10uH
5.0
Q972
PDTA114EK-115
SWITCH
BC978 4700p
CHC979 150p
L970 6.8uH
8200
R978
0
C977
10k
R979
0.01u
B
R0.6/
P0
100k
R980
Q970
2PB709AR-115
4.43
BELL FILTER
R982
R981
27k
C980
0.1u
47k
B
C981
0.01u
B
0
C994
0.01u
B
0
0
R997
10k
Q975
PDTA114EK-115
SWITCH
0
Q976
PDTC144EK-115
SWITCH
R998
10k
0
C995
10u
16V
R0/
P4.3
0
0
B+
R993
C992
0.01u
8200
B
0
0
0
0
0
0
0
0
0
4.3MHZ
1516171819202122232425262728
R/P
R
P
SYNC
GATE
BPFA
SYNC
1/4
GATE
AGC
AGC
AMP
AMP
0
0
VCC
4.3MHZ
OSC
from
FO
LIM
ADJ.
X2
FO
ADJ.
1.1MHZ
OSC
GND
0
0
0
1REF
P
R
CR
VR
2.2M
X2
BPF
CR
VR
R
P
1REF
0
0
B
PB
MUTE
R
LIM
4.3M
BPFB
P
R
1.1M
BPF
P
REC
MUTE
REC
B
4.2V
0
0
0
to SECAM DET
JL975
SECAM PROCESSOR
IC970
R989
1k
L973
47uH
C988
100p
CH
0
Q973
2PD601AR-115
BUFFER
R994
39k
0
R0.6/
P3.4
C993
0.01u
B
SW5V
PB3V
SEON
SECAMON
PBC
ANGND
PBRF
RECC
FSC
4
TO(4/10)
E
F
R973
220k
R972
27k
22k
R974
BC973 0.01u
R976 2700
1u BC974
BC975 0.022u
CHC976 2200p
JL970
47k
R977
JL971
47k
R986
16
BC982 680p
27uH
L971
C984
0.01u
R975
B
0
5600
R983
XX
R984
Q971
XX
XX
R987
R988
10k
100p CHC985
L972
47uH
JL973
R985 470
C996
C986
10u
16V
JL974
CH
10p
R991
R990
0.47u
XX
0
C987
C983
0.001u
R969
6800
L974
XX
R999
B
R995
10k
C991
0.1u
B
0
0
Q974
2PD601AR-115
BUFFER
R996
39k
0
R3.4/
P0.1
B
C989
XX
C990
XX
R992
XX
SIGNAL PATH
VIDEO SIGNAL
CHROMA
REC
PB
Y
Y/CHROMA
SECAM PROCESSOR
MA-372 (2/10)
4-9 4-10
Page 41
For schematic diagram
• Refer to page 4-5 for printed wiring board.
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
1
MA-372 BOARD(3/10)
VSP/PDC(VP BLOCK)
A
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
5
TO(5/10)
B
C
D
E
28
24
TO(4/10)
TO(10/10)
IICCLK
IICDAT
PDCDAV
IC850
VSP/PDC
VIDEO
DGND
D5V
32
4
(EXCEPT:SE100 A1/A2/K,SX100K,
SE250 P,SE400K,SE450P)
5.0
0.033u
2.1
R2.7/
1k
DAVN
PD 1
R2.6/P0
R2.5/P0
B
P2.8
R858
6800
N.C.
N.C.
R860
R862
2200
C854
C856
0.1u
2PB709AR-115
BUFFER
XX
EHB
TI
11 12 13 14 15 16 17 18 19 20
C853
R851
15k
R850
C851
100
10u
50V
R852
22k
R853
B+
VCS
IC850
SDA5650X-GEG
PD 2
2.5
R857
6800
1.2M
C852
2200p
B
F
Q850
CS
VCO 1
C855
0.22u
5.0
R859
1.2M
B
1.4
R861
680k
SDA
IREF
5.0
R1.2/P0.9
SCL
CVBS
R856
100k
JL852
12345678910
N.C.
N.C.
VSSA
VSSD
VDDA
VDDD
5.0
5.0
C850
0.1u
F
F
G
16
SIGNAL PATH
VIDEO SIGNAL
CHROMA
REC
PB
Y
Y/CHROMA
VSP/PDC
4-11
MA-372 (3/10)
Page 42
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for printed wiring board.
• Refer to page 4-2 for waveforms.
• Refer to page 4-31 for mounted table.
1
MA-372 BOARD(4/10)
Y/C,AUDIO PROCESSOR(VI BLOCK)
XX MARK:NO MOUNT
A
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
B
C
D
E
F
G
6
H
1
I
FULL ERASE HEAD
J
K
ACE HEAD
ERASE
HEAD
AUDIO
HEAD
CTL
HEAD
16
26 18
B+
C+5V
AUGND
ANGND
SW5V
C04
C380
0.047u
PET
4
5
6
R383
180
20
TO(10/10)
7
IC350
HEAD SELECTOR
TO(8/10)
TO(1/10)
18
CTLGND
CTL_X
CTL_Y
C01
C02
C03
C04
C05
C06
D01
D02
D03
D04
3
2
1
JL352
JL353
1
2
3
JL354
4
JL355
5
6
JL144
7
JL145
JL146
L1AUIN
FRAUIN
C+TU_M
LINEOUT
ASWCTL1
ASWCTL2
TRICKH
RECH
RECCUR
RECYRF
PBRF
RECC
CSYNC
3P
CN351
3
AU GND
N.C.
2
1
FE HEAD
7PCN350
1
A ERASE HEAD
2
AU GND
3
A HEAD REC
4
A HEAD PB
5
AU GND
6
CTL (Y)
7
CTL (X)
TO(5/10)
T380
BIAS
OSCILLATION
8
7
5
JS350
XX
3
2
0.01u
1
R380
47
PB
BA7755AF-E2
vcc
IC350
1234
5.1
C370
XX
B+
JL360
IC200
Y/C PROCESSOR
AUDIO PROCESSOR
IC200
LA71562M-MPB
C357
4.7u
R357
50V
8200
R360
R382
R4.8/P5.1
1
R2.1/P5.1
XX
R359
4.7k
Q350
2SC1815GR-TPE2
BIAS SW
C362
16V
47u
R364
270
C364
10u
50V
C366
50V
C367
0.01u
B
L380
100uH
C383
47u
16V
Q380
2SD879-AA
BIAS
C381
ERASE
B
OSC
R381
3.9k
C382
0.01u
B
R2.2/P5.1
R371
18k
2.4
5678
R3.4/
P1.2
0
R370
JL356
12k
JL361
R361
XX
R358
C358
1.8k
1u B
R362
1.2k
R363
18k
R2.0/
P0
C359
C360
1500p
B
1500p
R0.8/
P5.1
C363
4.7u
50V
C365
0.01u
B
R366
10k
R365
330k
1u
JL357
820R368
JL358
B02
D02
JL201
B04
R235
47k
B05
R236
47k
D01
D04
0
8
9 17
10 12 13
11
1473
16
19154
SIGNAL PATH
B+
CHROMA
VIDEO SIGNAL
Y
Y/CHROMA
REC
B+
E01
E05
E02
B+
PB
SIGNAL PATH
Ref.signal
ANGND
PB3V
B+
SW5V
FSC
SECAMON
SEDET
VIDEO
SEON
PBC
CSYNC
RECC
PBRF
TUNERV
VIDEO
E01
E02
E03
E04
E05
B01
B02
B04
B05
JL202
JL203
JL200
L1VIN
DECVIN
L1VOUT
DECVOUT
FRONTVIN
SEON
SEDET
FROMOSDV
TOOSDV
QVD
AMUTE
CROTVI
RFSWP
IICCLK
IICDAT
C351
47u
C01
68k
R355
C354
5.6k
R356
16V33u
C355
C356
2.4
0
R0/
P2.3
Vref
2.3V
2.3
MUTE
81828384858687888990919293949596979899100
0
AMP
LINE
2.3
A-GND
2.4
REC
AMP
2.4
R0.4/
P0
R2.0/
REC-EP.LP
P5.1
PB-EP
B
R0.8/
P0
2.4
2.4
R367
6.8k
R4.3/
REC
0
R2.3/
PB:LP.SP
P0
R3.1/
P2.3
R2.3/
P0
0
RECH OUT
R4.3/
P0
C ROT IN
R0.7/
P0
PB LOW OUT
R0.8/
P0.9
P4.4
TRICK H
OUT
6
R0.1/
R227
C200
0
L206
*
C253
*
CH
R228
0
0
0.01u
B
Q204
*
SECAM
SW
R233
*
ALC
DET
R
P
Vref
REC
AUTO
BIAS
EQ
AMP
FM
AGC
PB
EQ
BAL
TC1
1 2 3 4 5 6 7 8 9 101112131415161718192021222324252627282930
P0
P0
1.9
P2.6
R4.0/
R2.3/
JL206
C201
1u
50V
R1.9/P1.3
2PD601AR-115
C03
C02
16V
50V10u
*
68k
L350
R350
R352
100uH
5.6kR351
*
R353
B
C353
0.22u
ALC
DET
MUTE
R201
F
2.2M
R354
C352
0.1u
B
*
JL359
2.3
5.1
2.3
R0/
A-Vcc
4
1
2
3
SW1
ALC
Sub
CONV
Main
FM
EMPH
MOD
REC
DOUBLE
EQ
LIM
5
ACC
DET
FILT
3.0
P1.6
P2.0
R1.7/
R1.9/
B
JL207
C206
C204
0.01u
R204
330
L200
39uH
3.8
C205
*
CH
R1.2/
P1.9
R206
R200
*
10k
R205
330
Q200
B+
XX
XX
C203
C202
R202
0.047u
0.01u B
B
C350
0.22u
0.6
R4.0/
P4.1
R0/
P2.0
P2.5
SECAM
DET
8
KIL
DET
RA
B
ACC
P
DET
R
BPF2
P
Main
Sub
CONV
BPF
R
R
P
N.L.
EMPH
SUB
DEMOD
LPF
13
CLAMP
Y-Vcc
VIDEO
PEAKING
3.0
5.1
P2.5
R0/
R2.4/
P1.6
B
C208
1u
JL208
50V
0.047u
C207
R2.4/
27p
P2.5
CH
XX
*
R234
R207
C209
180p
CH
L201
100uH
R209
4.7k
R208
1.8k
Q201
2PD601AR-115
DEEMPHAMP
B
5.1
C210
DETAIL
27p
X200
VXO2
ENH
R0.1/
CH
R232
R203
4.433619MHz
JL209
2.7
C-GND
REC
APC
B-UP
AMP
C-LPF
R
KIL
P
P1.5
R0.6/
C218
0.01u
B
R1.8/
R210
560
*
C211
1.8k
0
VXO1
REC
APC
PB
BGA-B
PB
BGA-A
REC
BGA
R
P
R
0
P3.4
F
0.1u
P1.9
C219
JL217
B01
C213
B
R211
REC
APC
ACC
AMP
FMAGC
1u
C222
B
1u
C216
B
0.022u
B
1.2k
R212
B
C212
0.047u
8.2k
5.1
11
P
P
R
DET
1.5
B+
C221
C220
47u
16V
2.1
COMB
SERIAL
DECODER
5.0
R213
470
B
*
B
B
B
C215
C217
0.01u
0.1u
C214
R0/
0.01u
3.3
R0/
P3.5
R3.9/
0
R0/
AMP
LPF
KIL
B.D.
NAP
BPF
P5.0
R214
470
C255
0.01u
CLK
DATA
P3.5
P3.3
VCO
SLD
D.L
EQ
TH
D.L
EQ
BPF1
YNR
R
P
R
LPF
P
1/2
FBC
P
Y/C
MIX
12 14
SYNC
SEP
EQ
CTL
M-Emph
R0/
P1.4
R0/
P1.1
R0/
P0.3
JL210
R215
100
L202
10uH
*
R216
C228
B
390p
CH
L204
L203
10uH
10uH
C225
47u
6.3V
C223
0.1u
F
B
C224
0.01u
3.3
5.1
INV
P
R
R
PIC
CONT
DHP
NC
6dB
AMP
FILT.
Y-GND
R0/
P0.8
R229
C227
C226
47u
0.01u
6.3V
B
R237
XX
5.1
R0/
P2.5
C-Vcc
NTSC:H
1H/2H
D.L
CCD GND
0
2.5
1.8
515253545556575859606162636465666768697071727374757677787980
3Fsc
CLK IN
10
1H
D.L
PB-H OUT
VCA
CLAMP
AFC
FILT
CLAMP1
3
M
N.L.
De-EM
0.1
JL211
R217
*
XX
C05
1
2
1
3
4
OSD
SW2
SW3
R0/
SW1
R
P
Chara
INS.
6dB
6dB
AMP
AMP
R0/
P0.1
R0/
P2.0
R0/
P2.5
P1.7
JL212
JL213
R219
R218
47
0
R230
R231
XX
XX
C06
ALWAYS 5V
2
3
4
CLAMP2
REG
CLAMP3
AGC
TC2
CLAMP4
FBC
9
VIDEO
AGC
CLAMP5
SYNC
DET
R0/
P2.2
R0/
P4.8
JL214
C229
0.1u
B
E03
E04
C243
0.047u
B
D03
5.1
2.7
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Q202
2PD601AR-115
BUFFER
2.1
C230
0.1u
R0/
F
P0.8
R0/
P2.0
R9.3/
P9.4
R2.1/P2.0
1.4
R1.4/P0
2.3
R0/
C231
P4.3
1u
B
R0/
JL215
P2.0
R0/
P3.1
C232
R2.9/
1u
B
P0
R0/
C235
P3.4
1u
B
C233
R2.9/
0.1u
B
P3.0
5.1
R1.8/
P0
0
R2.0/
P0
R1.4/
P1.6
R0/
P1.8
1.9
R2.1/
P0
R2.9/
P3.0
C234
0.01u
R221
47
C236
R222
47p
*
R223
*
C238
10u
50V
0.01u
CH
C239
*CH
C240
*
B+
R220
1k
C244
0.01u
B
C245
0.1u
B
R225
C246
2.2k
0.01u
B
Q203
2PB709AR-115
BUFFER
C249
10u
16V
R226
1.8k
C256
C247
XX B
B
C248
16V
47u
B
C237
L205
0.1u
10uH
B
C241
C250
*
47u
16V
C242
C251
*
50V22u
C252
1u
B
R224
JL216
2.2k
1u
P
AUDIO
SIGNAL
REC
4
17
28
7
11
TO(2/10)
TO(9/10)
TO(3/10)
TO(7/10)
TO(5/10)
REC/PB
PB
Y/C, AUDIO PROCESSOR
MA-372 (4/10)
4-13 4-14
Page 43
For schematic diagram
• Refer to page 4-5 for printed wiring board.
• Refer to page 4-2 for waveforms.
• Refer to page 4-31 for mounted table.
1
MA-372 BOARD(5/10)
SERVO/SYSTEM CONTROL(SS BLOCK)
XX MARK:NO MOUNT
A
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
12
TO(9/10)
B
14
TO(8/10)
C
2
TO(1/10)
26
SS83
SS84
SS71
SS72
SS10
SS03
SS65
SS58
SS63
SS48
SS08
SS17
SS97
SS16
SS18
MODCONT
PCONT_SW5V
DEC/VTR_
COMPOUT
CTLCHK
TUSW1
TUSW2
IICCLK
IICDAT
TUAFT
AMUTE
LP/SP_
RFENV
HASW
RFSWP
D
RESET
CLOCK
D GND
SS25
SS60
SS21
SS18
SS72
SS71
SS50
SS52
SS63
SS15
SS13
SS86
SS67
SS72
SS71
SS59
SS14
SS66
SS68
SS70
SS05
SS04
SS11
SS12
SS64
SS74
SS65
SS75
4
3
2
DATA
1
ICONT
9
TO(7/10)
E
11
TO(4/10)
F
5
G
TO(3/10)
H
10
TO(6/10)
I
J
21
TO(10/10)
K
AVCONT
AVLINK
TOOSDV
FROMOSDV
CROTVI
PDCDAV
REMOCON
FLDSDA
FLDSCLK
FUKEY1
FUKEY2
PCONT_M12V
-11VCONT
PCONT_SW5V
C+/SW12VCONT
D5V_BACKUP
OSDVCC
MTR12V
MTRGND
OPEN
C+DET
RFSWP
IICDAT
IICCLK
AMUTE
SEDET
SEON
IICDAT
IICCLK
FLDCS
KKP+
SW12V
SW5V
ANGND
DGND
QVD
KKP-
B+
D5V
B+
B+
B+
B+
CN161
4P
L
16
C150
4.7u
50V
SS03
SS04
SS05
SS06
SS07
SS08
SS10
SS11
SS12
SS13
SS14
SS15
SS16
SS17
SS18
SS20
SS21
SS24
SS25
SS26
SS27
SS28
SS29
SS30
D140
1SS355TE-17
PDTC144EK-115
Q103
SWITCH
R162
10k
R160
*
R161
L160
22uH
4.5
*
0.01u B
0.01u B
1234
1234
R110
2.2k
0
C160
C161
R165
*
B+
IC160
RESET,PULSE GEN
POWER FAIL DET
IC160
MM1256XF-BE
IC161
EEPROM
IC161
M24C08-WMN6T
C162
0.22
5.5V
F
(CAP DOUBLE LAYER)
B+
P4.3
2PB709AR-115
POWER ON/OFF
R163
10k
R164
10k
R167
6.8k
L161
22uH
R5.0/P5.1
R4.8/P5.0
R5.0/P5.1
C163
0.01u B
R5.0/P5.1
R5.0/P5.1
C164
100u
16V
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
16
JL143
JL141
C146
2200p
B
JL131
JL133
JL121
JL122
JL123
JL124
JL125
JL127
JL128
JL129
C114
0.01u
B
JL115
JL114
JL113
JL112
JL111
R106
R107
39
39
1/4W
1/4W
C103
330u
6.3V
B+
JL117
PH100
GP3S120S
(T REEL)
1
2
3
1 SW 5V
2 CAP RVS
3 CAP FG
4 CTL-REF
5 CAP VS
6 LIMITTER
7 MTR 12V
8 MTR GND
9 AN GND
5
4
3
2
1
C104
XX
R100
15k
JL106
CN104 3P
CAM(-)
CAM(+)
CAM(+)
CN101 5P
MTR GND
D.FG
D.PG
D.VS
MTR 12V
CTL_X
CTL_Y
CTLGND
9PCN102
5.0
Q101
RPT-37PBT3
(T SENS)
(MODE)
S100
JL100
JL101
LOADING MOTOR
1
2
3
CAPSTAN MOTOR
1
2
3
4
5
6
7
8
9
5
4
3
2
1
R108
JL109
C105
0.001u
JL103
JL102
18
TO(4/10)
M903
M902
M901
DRUM MOTOR
22k
B
M
M
M
VCC 1
R120
47k
C120
0.01u
0.01u
B
R102
VCC 1
R13.6/P18.6
C132
XX
B
C113
0.01u
B
15k
GP3S120S
JL105
CAM(+)
R13.6/P13.5
C121
0.01u
0.4
R105
2.2k
2SC1815GR-TPE2
PH101
(S REEL)
154
IC130
LOADING MOTOR DRIVE
0.3
C130
XX
C134
0.01u
B
R123
4.7k
R124
470
R121
47k
B
R115
47k
JL108
1.7
(T/E LED)
Q102
LED DRIVE
(T/E LED)
R101
470
1/4W
JL118
C101
0.001u
R122
D100
GL528V1
B
R142
1.2k
XX
0.001u
JL116
R143
4.7k
C100
B
5
15
1.5
2.4
AMPC
21
32KHz(in)
1.5
JL163
C169
22p
CH
SS91
C144
22u
50V
R2.9/P2.4
R1.9/P2.4
CTL IN-
CTL IN+
RC CHECK
SERVO/SYSTEM CONTROL
32KHz(out)
17.734475MHz(in)
VCC
2.1
2.1
R5.0/P5.1
JL164
17.734475MHz
X161
C171
15p
C172
CH
15p
CH
C170
0.1u
B
JL165
C145
2.5
AMP VREF IN
IC162
17.734475MHz(out)
SS97
L140
22uH
R111
R5.0/
P0
47k
C149
220u
R0/
OUT 1
VCC 1
OUT 2
VCC 2
W.ENA
DATA
16V
5.0
Q104
JL166
0.6
R1.2/P0.1
JL167
4.7
R5.0/P5.1
4.5
5.0
5.0
R0/P1.6
R166
*
5.0
5.0
5.0
0
R0/P5.0
R2.1/P2.9
0
R0/P0.5
R2.2/P2.9
2.4
5.0
5.0
0
0
0
0
R0/P5.0
R0/P5.3
R168
5.0
150k
5678
R169
470k
C166
0.01u
B
5.0
CLK
5678
C165
0.01u
B
C141
C140
0.01u
100u
16V
C148
0.01u
B
123456789101112131415161718192021222324252627282930
DEST1
DEST2
TU AFT
FU KEY2
FU KEY1
S SENS
T SENS
RF ENV
AF ENV
MOD CONT
KKP +
KKP -
QVD
REMOCON
CROT
HA SW
ENV S
RF SWP
AF SWP
END LED
AV CONT
AF REC P
FULL ERS
CAP RVS
I CONT
MODE4
MODE3
MODE2
MODE1
REC PRF
R189
R171
1k
10k
JL160
JL161
R170
SS78
3.3k
JL168
JL169
C143
22u
50V
B
JL140
B
C142
0.022u
B+
5.0
5.0
2.4
AVCC
AMP VCC
24V CONT
CTL AMP OUT
RESET
IIC DAT1(EEP)
IIC CLK1(EEP)
CAM
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
2.2
4.8
R5.2/P5.3
R5.0/P5.1
JL162
32.768kHz
X160
C167
0.047u
B
C168
22p
CH
SS33
SS90
SS89
SS87
C173
100u
680p
16V
B
470
470
R177
R178
2.5
0.2
2.4
AMP VSS
DRUM FG
DRUM PG
AMP VREF OUT
20
18
19
SDA(VI/HF/TU/NICAM.ZWEI/MOD/VPS/DNR)
SCL(VI/HF/TU/NICAM.ZWEI/MOD/VPS/DNR)
IC162
*
16
VSS
CLK SEL
NICAM CLK
NICAM DATA
0
R5.0/P5.1
330
R176
C660
18p
R673
10k
8
SS86
SS85
470
R179
2.405.000
CAP FG
SECAM DET
OSC CHARA(IN)
OSC CHARA(OUT)LPOSD LPF
2.3
R0/P2.3
JL662
L660
2.2uH
0.0047u
CH
C661
18p
CH
SS84
SS83
TU SW2
FROM AV LINK
DIV CLOCK OUT/JOGLED CONT
17
NUB
1.7
1k
R660
C662
B
9 17
JS140
81828384858687888990919293949596979899100
DMS -
DMS +
TU SW1
T REEL
S REEL
P FAIL
23
DRUM ERR
CAP ERR
C+5V CONT
-14V CONT
TO AV LINK
FLD CLOCK
18V CONT OUT
TO FLD DATA
SECAM ON
FLD CS
SW5V CONT
MTR12V CONT
A MUTE
TA MUTE
AV CONT IN/C+ DET
PDC DAV
DEC/VTR_
NUA
C V IN(C SYNC IN)
OSD SECAM C IN
HLF(SLICER LPF)
OSD VCC
OSD V OUT
OSD W LEVEL
OSD V IN
OSD GND
0
R1.9/P2.0
JL660
C663
0.01u
B
SS48
SS50
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
C665
L661
*
*
C664
R661
0.1u
1M
B
R670
470
R2.6/
P2.0
R671
R1.9/
0
P2.0
2PB709AR-115
10 12 13
11
SS73
B+
R800
R807
*
*
D800
*
Q803
*
R180
6.8k
R181
3.3k
R196
3.3k
C670
R663
1u
1.5k
C669
0.0039u
B
R666
R665
XX
L662
22uH
EXCEPT:SE400K,SE100D1/A2/K,SX100K
R5.0/P5.1
4.5
R5.0/
P5.1
Q802
5.0
*
Q801
*
4.4
R803
*
0
R802
*
R804
*
B
0
L663
22uH
C671
R664
22p
CH
R667
0
330
R1.9/
P2.0
C673
XX
Q800
*
4.5
R4.4/
0
P4.3
R806
*
R182
R183
R185
R668
100
R669
100
R2.6/P2.7
Q660
2PB709AR-115
R2.5/
P0
R805
R184
0
470
470
0
22
R5.0/P5.4
5.0
5.0
R5.0/P2.6
2.6
R2.6/P4.4
R0/P5.0
R5.0/P0
R0/P5.5
5.0
R5.0/P4.9
4.9
5.0
3.9
4.9
5.0
0
0
0
R5.0/P5.1
0
2.0
R0/P0.2
2.0
5.2
R1.9/P2.6
0
Q661
”¯˚BUFFER
JL199
C801
*
B
4.8
B+
B+
*
R672
C666
R662
560p
470
CH
C667
0.01u
B
C672
0.01u
B
C668
100u
6.3V
B+
B+
1473
LB1943NIC130
R813
R801
*
*
SS85
5.0
0
Q804
*
SS33
*
SS80
SS79
SS24
SS87
SS78
SS77
SS91
SS76
SS76
SS75
SS74
SS73
SS72
SS71
SS70
SS68
SS67
SS66
SS89
SS65
SS90
SS64
SS77
SS63
SS60
SS59
SS58
SS06
SS52
JL661
SS20
SS07
SS30
SS79
SS80
SS29
SS28
SS27
SS26
B+
B+
B+
IN1
MTR(GND)
12345678910
B+
IN2
VCH
VCL
CAM(-)
R0.3/P0
B
C133
470
R132
0.01u
JL130
B+
R114
47k
MPG06D-6052PKG3
PS120
0.4A
R2.2/P2.4
D130
C124
XX
C115
0.1u
C107
47u
16V
D110
V REF
R4.8/P5.0
6.3
R130
15k
R133
R131
XX
47k
C131
47u
XX
16V
JS130
C122
C123
47u
16V
F
C108
1u
B
B+
R103
22k
JL107
5.0
R104
1k
Q100
C102
RPT-37PBT3
0.001u
(S SENS)
B
B+
JL104
S101
(REC PROOF)
SW12V
SW5V
ANGND
MTR12V
MTRGND
D5V
SIGNAL PATH
REC
Drum speed servo
Drum phase servo
Drum servo (speed and phase)
Capstan speed servo
Capstan servo (speed and phase)
Ref.signal
PBREC/PB
Note : The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
4-15 4-16
SERVO/SYSTEM CONTROL
MA-372 (5/10)
Page 44
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for MA-372 board printed wiring board.
• Refer to page 4-27 for KK-22 board printed wiring board.
• Refer to page 4-2 for waveform.
1
MA-372 BOARD(6/10)
USER CONTROL(FR BLOCK)
XX MARK:NO MOUNT
A
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
B
C
D
10
TO(5/10)
E
22
TO(10/10)
F
3
TO(1/10)
15
TO(7/10)
G
H
SE450 B/D/P,SE300 ONLY
CN402
*
CN460
*
KKP+
KKP-
REMOCON
FUKEY1
FUKEY2
FLDCS
FLDSDA
FLDSCLK
-11V
-F
+F
D5V
DGND
ANGND
ADJSW
EJECTSW
POWERSW
B
1
6
S1
KKP SW
KKP+
KKP-
D GND
JL413
4
JL414
3
JL415
2
JL416
1
KK-22 BOARD
R424
JL409
KKP SW
KKP+
KKP-
D GND
4
3
2
1
JL410
JL411
JL412
R425
0
0
B- B-
B+
C428
C429
XX
XX
4
IC460
SIRCS RECEIVER
S410
DIAL TIMER
PUSH/TURN
A
D
4E5
3
7
2
R460
10k
D424
STZ6.8N-T146
R470
10k
IC460
RPM6940
GND
OUT
5.0
123
5.0
C427
47u
16V
VCC
R471
330
R461
JL460
JL470
R-4.6/P-0.1
R-4.6/P-4.5
R-6.9/P-6.8
R-9.2/P-9.1
S467
PB
NTSC
4.43
NTSC
ON
PAL TV
-11.3
-11.3
-11.3
-11.3
10 12 139
S11
S12
S13
S14
S15
S16
S17
G6
-9.1
G5
-9.1
G4
-9.1
G3
23 24 25 26 27 28 29 30 31 32 33
C424
10u
16V
(5L)
73265
C423
0.01u
C421
22p
C422
0.1u
B
CH
B
R422
1k
R464
2.2k
S462
R474
3.9k
JL473
R5.0/P5.1
1234567891011
VDD
2.1
X OUT
VSS
2.1
X IN
R5.0/P0
RESET
AN5
AN4
AN3
AN2
AN1
AN0
R420
R421
R423
XXC425
1SS355TE-17
R465
3.3k
S463
R475
2.7k
B+
C420
47u
6.3V
(5L)
C460
XX
L460
R427
47uH
47
R462
1k
330
S460
EXCEPT;SE300
R472
1k
R463
1.5k
JL461 JL462 JL463 JL464
S461
R473
0
JL471 JL474
R5.0/P5.1
24
R4.0/P3.9
12 13 14 15 16 17 18 19 20 21 22
0
0
0
D421
S464
TRACKING+ON/STANDBY EJECT REC (REW)
R476
4.7k
8
S1
S2
S3
VDD
-11.30-11.3
R-2.4/P0
S4
IC420
TIMING GENERATOR
IC420
M35500BGP
D IN
D OUT
CS
↑
R4.9/P0
SLR-342VCT31
R466
0
CLK
VEE
4.9
R-11.4/P-11.3
↓
D420
JL420
R467
R468
0
R477
6.8k
JL476 JL477 JL478
R469
27k
R478
15k
S7
S5
S6LED1(RR)
R2.0/P0
R-6.9/P0
R-6.9/P0
(IRDREC)
LED2
VEE
R-11.4/P-11.3
-11.3
SE300 ONLY
EXCEPT;SE100 A1/A2
47k
JL467
BR
COM
MK
R479
47k
R426
470
1/10W
S8
R-6.9/P0
N.C.
3
2
1
S9
R-2.4/P-0.1-2.4
G1
-9.1
S2
5
4
S1
SE300 ONLY
3435363738394041424344
S10
R-9.1/P-6.8
G2
-9.1
11
ND420
F-
1
2
F-
4
P1
P2
5
P3
6
P4
7
P5
8
P6
9
P7
10
P8
11
P9
12
P10
13
P11
14
P12
15
P13
16
P14
17
P15
18
P16
19
P17
20
N.C.
21
G6
22
G5
23
G4
24
G3
25
G2
26
G1
27
F+
29
F+
30
FLUORESCENT INDICATOR TUBE
16
USER CONTROL
MA-372 (6/10)
S471S470
S473
S474
(PAUSE)(FF)STOP PLAY
S476
TRACKING-
S477
AUTO SET UP
(RF CHANNEL)
S478
SYNCHRO REC
4-17 4-18
Page 45
For schematic diagram
• Refer to page 4-5 for MA-372 board printed wiring board.
• Refer to page 4-27 for JK-179 board printed wiring board.
1
MA-372 BOARD(7/10)
INPUT/OUTPUT(IO BLOCK)
A
XX MARK:NO MOUNT
25
TO(10/10)
26
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
ANGND
B+
C+12V
AUGND
B
DECVIN
7
TO(4/10)
DECVOUT
L1VOUT
FRONTVIN
L1VIN
C
D
E
8
TO(9/10)
MODV
F
ICONT
9
TO(5/10)
G
16
TO(8/10)
SE300 ONLY
H
I
15
TO(6/10)
J
K
16
L
C+DET
AVCONT
AVLINK
E2AUIN
E2AUOUT
L1AUIN
L1AUOUT
FRAUIN
CN501
EJECTSW
POWERSW
CN480
*
FRONT VIDEO IN
FRONT AU(L) IN
POWER SW
EJECT SW
6P
EJECT SW
POWER SW
FRONT AU IN
FRONT VIDEO IN
AN GND
AU GND
AU GND
AN GND
1
2
3
4
5
6
6
5
4
3
2
1
JL543
JL544
JL545
JL546
JL547
S482
JL483
JL482
JL481
JL480
JK-179 BOARD
XX MARK:NO MOUNT
S481
D491
STZ6.8N-T146
3
EJECT
ON/STANDBY
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
73
R543
*
R542
*
Q541
XX
*
1.6
BUFFER
0.8
R541
*
D571
*
D575
*
C511
47u
16V
R11.9/
P3.6
R11.9/
P12.0
Q501
PDTA114EK-115
AV CONT SW
D500
STZ6.8N-T146
D504
STZ6.8N-T146
C510
0.01u
R3.6/
P11.9
C512
47u
16V
FL570
B
R515
*
FL572
*
R510
*
2PB709AR-115
BUFFER
R1.7/P1.8
R514
330
R516
4700
PDTC144EK-115
1k
AV CONT SW
FL500
FL502
8
9
10 12 13
11
14
MA-372 BOARD (7/10)
*MARKED = MOUNT TABLE
SE250, SE300D1/D2, SE100, SE200,
D540
*
CN570
CN500
*
DECODER/
LINE-3 IN
DECODER/
ENTREE
LINE-3
21P
LINE-1(TV)
LIGNE-1(TV)
SW GND
*
R548
Q540
*
CONT SW
R547
*
R570
R571
*
*
C570
0.0047u
R572
*
R511
150 1/4W
Q510
R513
XX
0
Q502
R502
4700
B
R2.4/
C513
470u
P2.5
6.3V
R512
75
R5-1/
P5.0
R500
R501
470
470
R549
*
0
D542
C572
0.0047u
R545 *
R546
D544
*
D570
C571
0.0047u
B
D513
STZ6.8N-T146
R517
STZ6.8N-T146
D512
UDZ-TE-17-13B
C500
D508
*
B
*
*
75
D515
C502
0.0047u
B
0.0047u
PDZ6.8B-115
B
D509
XX
0
0
JL541
JL540
D576
D511
PDZ6.8B-115
UDZ-TE-17-13B
JL542
*
D514
D505
PDZ6.8B-115
21
V IN
20
V OUT
19
SW GND
18
SW GND
17
I
16
R
15
SW GND
14
SW GND
13
N.C.
12
G
11
N.C.
10
SW GND
9
C+DET
8
B
7
A(L) IN
6
SW GND
5
A GND
4
A(L) OUT
3
A(R) IN
2
A(R) OUT
1
21
SW GND
V IN
20
V OUT
19
SW GND
18
SW GND
17
I
16
R
15
SW GND
14
SW GND
13
N.C.
12
G
11
AV_LINC
10
SW GND
9
AV CONT
8
B
7
A(L) IN
6
SW GND
5
A GND
4
A(L) OUT
3
A(R) IN
2
A(R) OUT
1
CNJ500
XX
REF.NO
CN570
D540
D542
D544
D570
D571
D575
D576
FL570
FL572
Q540
Q541
R510
R541
R542
R543
R545
R546
R547
R548
R549
R570
R571
R572
R574
SE450B/D/P, SE300G SE400, SE450K,
SX250D SX100
21P ✕✕
STZ6.8N-T146 ✕✕
STZ6.8N-T146 ✕✕
UDZS-TE17-6.8B ✕✕
UDZS-TE17-6.8B ✕✕
STZ6.8N-T146 ✕✕
STZ6.8N-T146 ✕✕
UDZS-TE17-13B ✕✕
a ✕✕
a ✕✕
2PB709AR-115 ✕✕
2PB709AR-115 ✕✕
180 150
100 ✕✕
180 ✕✕
150 ✕✕
33k ✕✕
47k ✕✕
1k ✕✕
75 ✕✕
75 ✕✕
470 ✕✕
470 ✕✕
470 ✕✕
100k ✕✕
SIGNAL PATH
REC
VIDEO SIGNAL
CHROMA
Y/CHROMA
Y
PB
AUDIO
SIGNAL
R491
C493
XX
C481
XX
R480
XX
STZ6.8N-T146
5
C541
R574
*
L510
100uH
B+
XX
C494
XX
J481
2P
4MGND
1
3
2
D481
L
5SW
3MONO
2VGND
1V
V
AUDIO
VIDEO
LINE-2IN
4
1
2
D493
PDZ6.8B-115
2
1
4-19 4-20
INPUT/OUTPUT
MA-372 (7/10)
Page 46
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for printed wiring board.
A
B
C
D
E
F
1
MA-372 BOARD(8/10)
C+ SWITCH(AU BLOCK)
AMUTE
DEC/VTR_
TU_M
MOD_A
ANGND
C+12V
AUGND
16
14
13
27
TO(5/10)
TO(9/10)
TO(10/10)
4
73265
8
109
11
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
JL584
JL589
JL588
JL581
JL582
R580
1k
R581
4700
SE250,SX250,SE300,
SE400 B/D/R ONLY
C580
10u
50V
IC580
C+ SWITCH
Q580
PDTC144EK-115
INDERTER
0
R582
10k
12.1
EXCEPT:SE300G
Q581
PDTC144EK-115
SWITCH
0.1
R583
10k
12.1
Q582
PDTC144EK-115
SWITCH
0.1
12.1
R584
10k
JL580
B+
MC14053BFEL
IC580
SE100,SX100K,SE200,
SE400K,SE450K ONLY
JS580
0
C582
10u
50V
100k
R586
6.4
6.4
6.4
6.4
12.1
C581
10u
50V
6.4
0
6.4
6.4
C583
10u
50V
R585
100k
9 10111213141516
P0
12.1
R12.1/
EXCEPT:SE300G
R587
100k
6.4
12345678
V
CC
12.1
C588
10u
50V
C584
0.1u
SE100,SX100K,SE200,
SE400K,SE450K ONLY
JS581
0
C586
C585
10u
10u
50V
50V
Q591
MUTE
0
2PD601AR-115
R589
R593
XX
100k
B
Q583
2PD601AR-115
12.1
R595
2200
6.4
C587
10u
50V
7.1
R590
1k
0
1SS355TE-17
SIGNAL PATH
1SS355TE-17
D590
D591
B+
L580
100uH
R594
10k
R596
15k
EXCEPT:
SE300G
REC
AUDIO
SIGNAL
PB
JL587
JL586
JL585
E2AUOUT
E2AUIN
FRAUIN
L1AUOUT
L1AUIN
L1AUIN
FRAUIN
C+TU_M
ASWCTL2
ASWCTL1
LINEOUT
SE250,SX250,SE300,
SE450 B/D/P ONLY
16
TO(7/10)
6
TO(4/10)
C+ SWITCH
MA-372 (8/10)
4-21 4-22
Page 47
For schematic diagram
• Refer to page 4-5 for printed wiring board.
1
265
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
8
10 12 139
11
1473
154
16
17
MA-372 BOARD(9/10)
TUNER(TU BLOCK)
A
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
B
C
D
E
F
G
H
I
16
TU701
SE100K,SE200V1/V2,SE400K,SE450K,SX100K
AERIAL
ANTENNA
IN
(ENTREE)
OUT
(SORTIE)
JL752
JL754
BB(5V)
MOD A
AERIAL
ANTENNA
SCL
SDA
SDA
100
R755
30V
MB(5V)
711
JL753
100
R754
N.C.5VN.C.
RF AGC
SCL
MOD V
5V
30V
N.C.
N.C.
IF
470
R705
R704
470
SW1
IF
181318103141512 16217546 9
19
M OUT
SW2
20
21 22 23 24 25
AFT
SIF
V OUT
IN
(ENTREE)
OUT
(SORTIE)
B+
8
TO(7/10)
MODV
B+
B+
17
TO(4/10)
TUNERV
TU700
BB(5V)
B+
BTF-3MU604
EXCEPT SE100K,SE200V1/V2,SE400K,SE450K,SX100K
SDA
MOD V
30V
MB(5V)
MOD A
SCL
711
B+
EXCEPT
SE100K,SE400K
SX450K,SX100K
JL705
RF AGC
C710
SIGNAL PATH
N.C.
SDA
SCL
N.C.
TP
N.C.
30V
N.C.
5V
JL704
SW1
SW2
19
20
21 22 23 24
JL702
M OUT
V OUT
SIF
AFT
JL703
REC
PB
IF
181318103141512 16217546 9
CHROMA
VIDEO SIGNAL
Y
Y/CHROMA
B+
B+
22u
50V
JS754
XX
B+
AUDIO
SIGNAL
B+
ANGND
B+
SW30V
23
TO(10/10)
12
TO(5/10)
13
TO(8/10)
MODCONT
PCONT_SW5V
SW5V
C+12V
IICDAT
IICCLK
TUSW1
TUSW2
TUAFT
MOD_A
TU_M
B+
B+
D6V
B+
R733
470
EXCEPT:SE200G,SE300G
R731 470
EXCEPT:SE100K,SE200V1/V2/G,SE300G,
SE400K,SE450K,SX100K
L700
XX
R34.8/P34.6
Q720
JL706
R701
XX
2.3
C701
10u
50V
C707
C706
XX
XX
Q702
XX
2SA1309A-QRSTA
POWER CONTROL
R702
0
0
R703
XX
R34.7/P34.6
B+
R723
R724
100k
3.3k
0.7
R726
R725
R34.0/P33.9
22k
2PD601AR-115
SWITCH
L720
68uH
L721
MTZJ-T-77-33
22uH
R711
C721
22u
50V
390
1/4W
100k
0
Q721
C720
XX
D702
C704
10u
50V
C705
0.047u
B+
B+
B+
L701
2.2uH
R751
XX
R713
C702
JL700
100
XX
C700
XX
JL701
C709
C708
0.01u
47u
B+
16V
B
R714
470k
B
S1G-G2P
Q750
XX
C751
C750
XX
XX
JS752
JS753
XX
D750
L750
2.2uH
5.05.8
0
XX
D751
XX
D752
B+
C752
100u
16V
R756
10k
R5.0/
P5.1
Q751
PDTC144EK-115
SWITCH
C753
0.1u
B
Q752
2PB709AR-115
POWER CONTROL
R4.2/
P0.1
R757
0.1
B+
4.95.0
L751
1k
C754
470u
6.3V
C755
XX
JS751
XX
4-23 4-24
TUNER
MA-372 (9/10)
Page 48
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for printed wiring board.
1
4
73265
8
10 12 139
11
MA-372 BOARD(10/10)
A
B
C
D
E
F
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
CN600 11P
TO
POWER BLOCK
BOARD
(SEE PAGE
4-30)
AU GND
GND
GND
GND
-11V
IC601
PQ12RD08
Q601
1k
Q611
2PD601AR-115
5.8
R602
47k
C603
22u
50V
12.8
R603
0.60mm
R601
1/4W
SWITCH
5.8
6V SWITCH
2SB733-T-34
12V SWITCH
R13.6/P13.5
180
2W
JS601
1k
R11.1/
P5.8
2SC2785TP-FEK
R11.1/P11.2
5.1
Q600
2SD2394-F
R605
0.8
4700
R604
4700
6.4
Q604
SWITCH
JS602
XX
R-11.5/
P11.5
R-10.8/
P10.7
2SD774-T-4
SWITCH SWITCH
13.6
R600
1/4W
R0.8/P0.7
Q603
ET600
1
2
3
JL600
4
35V
13V
13V
13V
6V
6V
JL601
5
JL602
6
JL603
7
8
9
JL604
10
11
JL605
PS600
PS601
0.4A
1A
JL606
L601
10uH
R627
2PD601AR-115
SWITCH
XX
JS600
*
B
C601
0.01u
5.2
5.8
5.8
C602
XX
R607
1500
C604
47u
16V
D600
1SS355TE-17
D601
1SS355TE-17
D602
PDZ5.1B-115
Q602
R-11.4/
P11.4
JL608
JL609
R606
6800
C612
0.01u
B
13V212V3GND4CONT
1
13.6
12.1
C613
100u
16V
D607
S1G-G2P
EXCEPT:
D606
S1G-G2P
R622
2.7
1/2W
R626
C615
22u
50V
Q608
SWITCH
JL614
1k
JL619
C611
47u
16V
4.4
C621
XX
JS603
Q613
PDTC144EK-115
POWER CONTROL
R624
10k
Q612
12V SWITCH
2SB1122-ST-TD
12.0
C620
0.1u
B
C605
10u
R608
50V
560
1/4W
R609
220
1/4W
R610
220
1/4W
0
PDTC144EK-115
5.0
JL607
JL610
Q606
C607
0.01u
PS602
B
0.25A
C606
XX
5.8
Q605
PDTA114EK-115
SWITCH
0
5.8
0
R625
4700
R11.4/P0
12.1
JL611
R611
1k
5.8
5.1
Q607
2SB1122-ST-TD
SWITCH
5.8
S1G-G2P
SE250,SE300,SE450B/D/P,
SX250D
R615
820
D603
PS603
0.25A
4.8
0.1
PDTC144EK-115
2.8
R618
1800
R617
1k
SE250,SE300,
SE450B/D/P,
SX250D
R613
22
3W
IC601
12V REG
JL618
C614
XX
R623
5.6
1/2W
10
R614
JL617
JL612
JL613
1W
JL421
JL616
C+12V
AUGND
ANGND
C+12V
ANGND
AUGND
C+5V
SW5V
ANGND
AUGND
SW5V
ANGND
PCONT_M12V
-11VCONT
PCONT_SW5V
C+/SW12VCONT
MTR12V
MTRGND
SW5V
SW12V
ANGND
OSDVCC
D5V
D5V_BACKUP
DGND
DGND
D5V
D5V
DGND
ANGND
+F
-F
-11V
D6V
C+12V
SW5V
ANGND
SW30V
27
TO(8/10)
25
TO(7/10)
20
TO(4/10)
19
TO(1/10)
21
TO(5/10)
24
TO(3/10)
22
TO(6/10)
23
TO(9/10)
G
16
H
POWER SUPPLY
MA-372 (10/10)
SIGNAL PATH
VIDEO SIGNAL
Y/CHROMA
CHROMA SIGNAL
Y
AUDIO
REC
PB
4-25 4-26
Note : The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
Page 49
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
JK-179 (SE300)
(LINE-2 IN)
KK-22 (SE300, SE450B/D/P)
(DIAL TIMER (PUSH/TURN))
POWER BLOCK
MA-372
VIDEO, AUDIO,
SERVO/SYSTEM CONTROL,
TUNER, POWER SUPPLY
JK-179 (LINE-2 IN) PRINTED WIRING BOARD (SE300 only)
There are few cases that the part printed on this diagram isn’t
mounted in this model.
KK-22 (DIAL TIMER) PRINTED WIRING BOARD
(SE300, SE450B/D/P only)
There are few cases that the part printed on this diagram isn’t
mounted in this model.
4-27
LINE-2 IN
JK-179
DIAL TIMER
/
KK-22
Page 50
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
POWER SUPPLY BLOCK (SWITCHING REGURATOR) PRINTED WIRING BOARD
— Ref. No. :1,000 Series —
MA-372
VIDEO, AUDIO,
SERVO/SYSTEM CONTROL,
TUNER, POWER SUPPLY
JK-179 (SE300)
(LINE-2 IN)
POWER BLOCK
KK-22 (SE300, SE450B/D/P)
(DIAL TIMER (PUSH/TURN))
SWITCHING REGURATOR
POWER SUPPLY BLOCK
4-28
Page 51
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
1
POWER BLOCK
– REF. NO. :1000 SERIES –
A
AC IN
220-240V
50Hz
B
C
D
16
Note : The components identified by mark 0 or dotted
F001
3PCN001
1
2NC
3
2A
250V
G4 G3
G5
line with mark 0 are critical for safety.
Replace only with part number specified.
C106
100nF
83V
41012139
ZD103
P6KE350ARL
D003
IN4007
D004
IN4007
(2/2)
C003
47uF
400V
C103
470pF
50V
R101
130k
R102
130k
R103
130k
R104
130k
C102
10uF
50V
D101
ISS133T-77
D102
ERA91-02V3
C004
3300pF
250V
C005
3300pF
250V
Q101
SSS2N90-A
R105
4.7V
R218
2.2k
D103
IN4007
L103
EXCEL
R107
0.75
C104
1.5nF
50V
R110
D001
C002
0.1uF
250V
IN4007
D002
IN4007
Z001
750V
250V
C001
0.047uF
250V
R001
0.5k
L002
26mH
2M
C006
470p
250V
C007
470pF
250V
L001
60uH
C
IC101
PWM
IC101
R112
UC3844A
1234
ZD101
1k
5.1V
0.4W
ZD102
27V
0.4W
22k
Q102
2SC3311A-QTA
R111
10k
C107
22uF
50V
R113
100
5678
D104
ISS133T-77
C105
220nF
63V
LTV817BM-V
PC101
T101
ETB29AZ116AC
5
4
3
2
1
11
L201
EXCELDR35V
EXELDR35V
6
7
8
9
10
L302
ERB83-006V3
ERA91-02V3
D401
C404
D601
D201
IN4007
C201
100uF
50V
D301
FE3C
C304
C401
820uF
16V
C
C601
330uF
25V
C301
820uF
25V
R505
1.8k
R201
100k
IC501
KA431AZTA
R601
100k
R503
47
PC101
LTV817BM-V
C501
1uF
50V
L301
3.3uH
(1/2)
R504
6.8k
R501
1k
IC501
R502
C302
C303
100uF
10nF
63V
50V
R301
820
L401
3.3uH
1.4k
C402
470uF
10V
C403
10nF
83V
1 GND
2 GND
3 GND
4 AU GND
5 35V
6 13V
7 13V
8 13V
96V
10 6V
11 -11V
14732658
11PCN101
TO
MA-372 BOARD
(10/10)
CN600
(SEE PAGE
4-25)
4-29 4-30
SWITCHING REGURATOR
POWER SUPPLY BLOCK
Page 52
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
MA-372 BOARD (4/10)
*MARKED = MOUNT TABLE
REF.NO
C205
C221
C239
C240
C241
C242
C253
C353
L206
Q204
R206
R207
R216
R217
R222
R223
R228
R232
R233
R352
R353
B D/P K K
47p 50V CH ✕
0.1u 25V B ✕
470p 50V CH ✕
47u ✕
PDTC144EK ✕
100 ✕
47 ✕
0 ✕
4.7k ✕
SE450 SE400
33p 50V CH
0.1u 25V CH
✕
✕
✕
680
2.7k
330k
✕
33k
✕
✕
SE300
G D1/D2
1u 25V B
47p 50V CH
0.1u 25V B
0.22u 16V B
47
4.7k
68k
5.6k
SE250
B D/P
47p 50V CH
0.1u 25V B
470p 50V CH
47u
PDTC144EK
47
0
0.1u 25V CH
100
SX250
D
39p 50V CH
820
820
680k
15k
SE200 SE100 SX100
G/I V1/V2 A1/A2 K
1u 25V B 0.1u 25V CH
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
MA-372 BOARD (5/10)
REF.NO
C665
IC162
L661
R160
R161
R165
R166
R672
B D/P K K
56p 50V CH ✕ 56p 50V CH
M37760MFH-215GP
2uH ✕ 22uH
5.6k 1.5k 8.2k
3.3k 1.5k/✕ 3.3k 1.5k
3.3k ✕
3.3k ✕
1k ✕ 1k
SE450 SE400
SE300
G D1/D2
✕
✕
3.3k ✕
3.3k 12k
3.3k
3.3k
✕
SE250
B D/P
56p 50V CH
M37760MFH-210GP
22uH
5.6k
✕ 5.6k/1.5k
1k
SX250
D
✕
✕
5.6k
1.5k/8.2k 3.3k ✕
SE200 SE100 SX100
G/I V1/V2 A1/A2 K
56p 50V CH
✕ 22uH
3.3k ✕ 8.2k
✕
✕
✕ 1k
4-31
4-32E
Page 53
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SECTION 5
INTERFACE, IC PIN FUNCTION DESCRIPTION
5-1. SYSTEM CONTROL — VIDEO/RP BLOCK INTERFACE (MA-372 BOARD IC162)
Signal
RF SWP
QVD
C.V.IN
*1 Synchronized with drum rotation. 25 Hz 50% duty pluse.
*2 Normally “L”. “H” when video signal is not generated.
*3 Composite sync signal (positive).
Pin No.
MA-372
IC162 qk
MA-372
IC162 qd
MA-372
IC162 th
I/O
STOP/
FF/REW
*1
O
O
I
L
*3
5-2. SYSTEM CONTROL — SERVO PERIPHERAL CIRCUIT INTERFACE
(MA-372 BOARD IC162)
Signal
CTL +IN
DRUM PG
DRUM FG
CAP FG
CAP RVS
CAP ERR
DRUM ERR
*1. 25 Hz pulse.
*2. Pulse in period in proportion to tape speed.
*3. 25 Hz “H” pulse.
*4. 330 Hz pulse.
*5. Unstable period pulse.
*6. DC voltage 1 to 5V.
*7. Hi-Z (2.5 V)
Pin No.
MA-372
IC162 og
MA-372
IC162 o;
MA-372
IC162 il
MA-372
IC162 ij
MA-372
IC162 wf
MA-372
IC162 uh
MA-372
IC162 uj
I/O
I/O
STOP
*7
I
*3
I
*4
I
H/L
O
H/L
O
O
L
*6
TAPE
LOADING
*1
L
*3
FF
*7
*3
*4
*2
L
*6
*6
TAPE
UNLOADING
*1
L
*3
REW
*7
*3
*4
*2
H
*6
*6
PB
*1
*2
*3
TAPE
LOADING
*7
*3
*4
*5
L
*6
*6
REC
*1
L
*3
TAPE
UNLOADING
*7
*3
*4
*5
H
*6
*6
REC/PAUSE
*1
L
*3
PB
*7
*3
*4
*2
L
*6
*6
REC
*1
*3
*4
*2
L
*6
*6
5-1
Page 54
5-3. SYSTEM CONTROL — MECHANISM BLOCK INTERFACE (MA-372 BOARD IC162)
Signal
CAM
MODE 1
MODE 2
MODE 3
MODE 4
REC PRF
T REEL
S REEL
END LED
T SENS
S SENS
*1. “L” when erasing protection tab is bent. “H” when not bent.
*2. Pulse of period in proportion to reel rotating speed.
*3. Approx. 2 msec period “H” pulse.
*4. Normally “L”. 2 msec period “H” pulse when tape top or tape end is detected.
*5. Hi-Z
Pin No.
MA-372
IC162 ed
MA-372
IC162 wl
MA-372
IC162 wk
MA-372
IC162 wj
MA-372
IC162 wh
MA-372
IC162 e;
MA-372
IC162 i;
MA-372
IC162 ul
MA-372
IC162 w;
MA-372
IC162 7
MA-372
IC162 6
I/O
O
I
I
I
I
I
I
I
O
I
I
EJECTED
CASSETTE
LOADING
M
H
H
L
L
L
H/L
H/L
L
*3
*3
H/M
—
—
—
—
*1
H/L
H/L
*3
*3
*3
CASSETTE
UNLOADING
L/M
—
—
—
—
*1
H/L
H/L
*3
*3
*3
TAPE
THREADING
H/M
L
L
H
H
*1
H/L
*2
*3
*4
*4
TAPE
UNTHREADING
L/M
L
L
H
H
*1
H/L
*2
*3
*4
*4
STOP
M
H
H
H
L
*1
H/L
H/L
*3
*4
*4
FF
REW
M
H
H
L
H
*1
*2
*2
*3
*4
*4
PB
REC
M
M
M
H
H
H
H
L
L
L
L
L
H
L
L
*1
*1
*1
*2
*2
*2
*2
*2
*2
*3
*3
*3
*4
*4
*4
*4
*4
*4
5-4. SYSTEM CONTROL — SYSTEM CONTROL PERIPHERAL CIRCUIT INTERFACE
(MA-372 BOARD IC162)
Signal
RESET
Pin No.
MA-372
IC162 ef
I/O
I
Normal “H” , “L” when seryvice Interruption is detected or restored.
I/O level
5-5. SYSTEM CONTROL — AUDIO BLOCK INTERFACE (MA-372 BOARD IC162)
Signal
A MUTE
Pin No.
MA-372
IC162 yd
I/O
STOP/
FF/REW
O
L
TAPE
LOADING
L
TAPE
UNLOADING
L
PB
REC
REC/PAUSE
L
L
H
5-2
Page 55
5-6. SERVO/SYSTEM CONTROL MICROPROCESSOR PIN FUNCTIONS
(MA-372 BOARD IC162)
Pin No.
1
DEST1
2
DEST2
3
TU AFT
4
FU KEY2
5
FU KEY1
6
S SENS
7
T SENS
8
RF ENV
9
N.C.
10
MOD CONT
11
KKP+
12
KKP–
13
QVD
14
REMOCON
15
CROT
16
HA SW
17
ENV S
18
RF SWP
19
AF SWP
20
END LED
21
AV CONT
22
AF REC P
23
FULL ERS
24
CAP RVS
25
I CONT
26
MODE 4
27
MODE 3
28
MODE 2
29
MODE 1
30
REC PRF
31
IIC CLK1 (EEP)
32
IIC DATA1 (EEP)
33
CAM
34
RESET
35
32kHz (IN)
36
32kHz (OUT)
37
Vcc
38
17.734475MHz (IN)
39
17.734475MHz (OUT)
40
Vss
41
NICAM. CLK
42
NICAM. DATA
43
CLK SEL
44
OSC CHARA (IN)
45
OSC CHARA (OUT)
46
NUB
47
OSD LPF
48
LP
49
OSD GND
50
OSD V IN
Pin Name
I/O
—
O
O
O
O
O
O
O
O
O
O
O
O
O
I/O
O
O
O
O
O
I/O
I/O
I/O
O
Function
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Destination identification input 1
Destination identification input 2
AFT input from TUNER for station selection
Function key input (9 keys)
Function key input (9 keys)
Tape end sensor input
Tape top sensor input
Video RF envelope input
N.C.
RF modulator ON/OFF control
KKP 2-phase pulse B input
KKP 2-phase pulse A input
Pseudo VD output
Remote control SIRCS signal input
Head azimuth information
SP/EP head switching signal
Identification signal of SP/EP head output comparison & detection
Video RF switching pulse output
N.C.
End sensor LED output
EURO 21 pin AV CONT signal output
N.C.
N.C.
Inverted capstan signal
EURO 21 pin-I CONT signal output
Cam encode data 4
Cam encode data 3
Cam encode data 2
Cam encode data 1
Safety tab detection input
I2C clock (EEPROM control)
I2C data (EEPROM control)
Cam motor control signal
Reset input
Sub clock input
Sub clock output
Power supply input terminal (high speed mode: 4.0 to 5.5 V, low speed mode: 2.6 to 5.5 V)
Main clock input
Main clock output
Ground terminal
N.C.
N.C.
Selection of oscillation clock when reset is canceled. L: sub clock, H: main & sub clocks
Clock input for OSD character size
Clock output for OSD character size
Connected to Ground
External filter that doubles the fsc, is connected to this terminal
“L” at SP. “H” at EP/LP.
Ground terminal of OSD/slicer
Video signal input for OSD overlay
5-3
Page 56
Pin No.
51
OSD W LEVEL
52
OSD V OUT
53
OSD Vcc
54
HLF (SLICER LPF)
55
OSD SECAM C IN
56
C V IN (C SYNC IN)
57
NUA
58
DEC/VTR
59
PDC DAV
60
AV CONT IN/C+DET
61
DIV CLK OUT/JOG LED CONT
62
TA MUTE
63
A MUTE
64
MTR 12V CONT.
65
SW 5V CONT.
66
FLD CS
67
SECAM ON
68
TO FLD DATA
69
18V CONT
70
FLD CLOCK
SCL
71
(VI/HF/TU/NICAM ZWEI/MOD/VPS/DNR)
SDA
72
(VI/HF/TU/NICAM ZWEI/MOD/VPS/DNR)
73
TO AV LINK
74
–14V CONT
75
C+ 5V CONT
76
CAP ERROR
77
DRUM ERROR
78
P FAIL
79
S REEL
80
T REEL
81
DMS+
82
DMS–
83
TU SW1
84
TU SW2
85
FROM AV LINK
86
SECAM DET
87
CAP FG
88
AMP Vss
89
DRUM FG
90
DRUM PG
91
AMP VREF OUT
92
AMP VREF IN
93
RC CHECK
94
CTL –IN
95
CTL +IN
96
AMP C
97
CTL AMP OUT
98
AMP Vcc
99
AVcc
100
24V CONT
Pin Name
I/O
O
I/O
O
O
O
O
O
O
O
O
O
O
O
I/O
I/O
O
O
O
O
O
O
O
I/O
I/O
O
O
Function
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
OSD white level input
OSD video signal output
Power supply input terminal for OSD/slicer (4.75 V to 5.25 V)
LPF connection terminal for slicer/AFC (This terminal is used as the HLF terminal
when C. Video is input to pin-56.)
Color signal input for SECAM OSD
Video signal input for tuner’s station selection, OSD and servo sync signal detection
(after passing filter)
Connected to Ground
Decoder/VTR switching
PDC/VPS signal reception identification input
CANAL+ connection identification input
Terminal of using JOGLED output or adjustment mode output of clock dividing frequency
Tuner audio mute signal output
Audio mute signal output
Motor 12 V power control signal
SW 5 V power control signal
Chip selection signal for display tube driver
SECAM ON signal/surround audio control (switched by destination)
Serial data out CH0 (FLD)
N.C.
Serial clock CH0 (FLD)
I2C clock (video/HiFi/tuner/ARC/modulator/VPS control)
I2C data (video/HiFi/tuner/ARC/modulator/VPS control)
SMART LINK data output for communication
Power save control
Power save control
Capstan error output
Drum error output
Power failure detection input
Supply reel sensor input
Take up reel sensor input
N.C.
N.C.
Turner system BG/L selection signal
Turner system BGL/L selection signal
SMART LINK data input for communication
SECAM identification input
Capstan FG input
Ground terminal for analog amplifier (connected to Vss)
Drum FG input
Drum PG input
Analog amplifier reference power supply output terminal
Analog amplifier reference power supply output terminal
No use (Fix to “L” on the outside for the terminal only for the input)
CTL signal input/output terminal
CTL signal input/output terminal
CTL amplifier AC Ground terminal
CTL amplifier output
Power supply input terminal for analog amplifier (connected to Vcc)
Power supply input and reference voltage input to A-D converter
N.C.
5-4
Page 57
5-7. MODE CONTROL PIN FUNCTIONS (MA-372 BOARD IC420)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
Pin Name
VDD
X OUT
VSS
X IN
RESET
AN5
AN4
AN3
AN2
AN1
AN0
CS
D IN
D OUT
CLK
VEE
VEE
LED1 (RR)
LED2 (IRDREC)
NC
G1
G2
G3
G4
G5
G6
S17
S16
S15
S14
S13
S12
S11
S10
S9
S8
S7
S6
S5
S4
S3
S2
S1
VDD
I/O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Function
D5V
X’ tal out
Ground.
I
I
I
X’ tal in
RESET input.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
FLD chip select signal out.
FLD IIC BUS (data) input.
Not connect.
FLD clock.
–11V
–11V
RR LED control signal output.
IRDREC LED control signal output.
Not Connect.
Grid terminal 1.
Grid terminal 2.
Grid treminal 3.
Grid treminal 4.
Grid treminal 5.
Grid treminal 6.
Segment terminal 17.
Segment terminal 16.
Segment terminal 15.
Segment terminal 14.
Segment terminal 13.
Segment terminal 12.
Segment terminal 11.
Segment terminal 10.
Segment terminal 9.
Segment terminal 8.
Segment terminal 7.
Segment terminal 6.
Segment terminal 5.
Segment terminal 4.
Segment terminal 3.
Segment terminal 2.
Segment terminal 1.
D5V
5-5
Page 58
MEMO
5-6E
Page 59
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
Red
Horizontal sync signal
Burst signal
(Should be flat)
Approx.
0.3 V
White (75%)
Approx. 0.3 V
Approx. 0.7 V
SECTION 6
ADJUSTMENTS
6-1. MECHANICAL ADJUSTMENTS
For the mechanical adjustments, please refer to the
“VHS MECHANICAL ADJUSTMENT MANUAL
(S MECHANISM)” (9-921-647-11).
6-2. ELECTRICAL ADJUSTMENTS
See the adjusting part location diagram from on page 6-4
for the adjustment.
2-1. PREPARATION BEFORE ADJUSTMENT
2-1-1. Equipment Required
The measuring instruments used for this alignment include:
1) Monitor TV
2) Oscilloscope, dual-trace, bandwidth of 30 MHz or more, with
delay mode (A probe 10:1 should be used unless otherwise
specified.)
3) Frequency counter
4) PAL Pattern generator
5) Remote commander
6) Digital voltmeter
7) Audio generator
8) Audio level meter
9) Audio attenuator
10) Alignment tapes
KRV-51P (PAL) Part No. : 8-192-955-57
2-1-2. Equipment Connection
Unless otherwise specified, connect and adjust the measuring
instruments as shown in the following diagram.
J481
VIDEO IN
Pattern generator VCR
Monitor TV
2-1-3. Set-up of Adjustment
In this adjustment, P AL pattern g enerator is connected with LINE2 input terminal. When check to tuner, connected AERIAL terminal.
Check that the synchronizing signal of the Y signal has an amplitude
of approximately 0.7 V and that the b urst signal has an amplitude of
approximately 0.3 V and its waveform is flat. And check that the
level ratio of burst signal to “red” signal is 0.30 : 0.66. The video
signal (color bar) used for electrical aligning this unit is shown in
Fig. 6-2-2.
Fig. 6-2-2 Color Bar Signals of Pattern Generator
2-1-4. Alignment Tape
• Contents of KRV-51P
Audio signal
Hi-Fi
400Hz
(L/R)
Normal
400Hz
1
2
3
4
Mode
SP
LP
Period
7 minutes
3 minutes
7 minutes
3 minutes
Video signal
Color bar
Monoscope
Color bar
Monoscope
Video output
(75Ω)
CN500 ql V OUT
Fig. 6-2-1
6-1
Page 60
2-1-5. Input/Output Levels and Impedance
Video input: LINE-1 (TV)/LINE-2 IN
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
Video output:LINE-1 (TV)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
Audio input: LINE-1 (TV)/LINE-2 IN
Input level: –7.5 dBs
(0 dBs= 0.775 Vrms)
Input impedance: more than 47 kilohms
Audio output:LINE-1 (TV)
Standard level: –7.5 dBs at load impedance 47
kilohms
Output impedance: less than 10 kilohms
2-1-6. Adjustment Sequence
The adjustments should be performed in the following sequence.
Power Supply Check
Servo System Adjustments
Audio System Adjustments
2-2. POWER SUPPLY CHECK
2-2-1. Output Voltage Check (MA-372 Board)
Mode STANDBY
D5 V Check
Measurement point Cathode of D606
Specified value 4.8 to 5.4 V
Mode E-E
–11 V Check
Measurement point Corrector of Q602
Specified value –13.5 to – 9.5 V
SW +12 V Check
Measurement point IC601 pin 2 or corrector of Q612
Specified value 11.7 to 12.3 V
SW +5 V Check
Measurement point Emitter of Q600
Specified value 4.8 to 5.4 V
MTR12 V Check
Measurement point Corrector of Q601
Specified value 12.6 to 13.6 V
SW +30 V Check
Measurement point Corrector of Q720
Specified value 33.5 to 36.5 V
[Check Method]
1) Each of these supply voltages must meet its specified value.
6-2
Page 61
LINE-2 IN
J481
LINE-1(TV)
CN500
Q601
E
B
Q600
B
E
Q602
BE
15
CN262
2-3. SERVO SYSTEM CHECK
r
2-3-1. RF Switching Position Adjustment
(MA-372 Board)
[Adjustment Purpose]
T o adjust the link of the A-ch and B-ch of the tape playback outputs.
To make the unit compatible with other tapes and units. If this
specification is not satisfied, the link will appear on the screen and
the screen will be disrupted, etc.
2-4-1. Normal Audio System Adjustment
• Make adjustment in the SP mode unless otherwise specified. Use
a normal VHS cassette for an adjustment tape.
• Set AUDIO MONITOR to normal.
2-4-2. ACE Head Adjustment
Refer to the VHS mechanical adjustment manual (S
MECHANISM) (9-921-647-11).
2-5. ADJUSTING PARTS LOCATION DIAGRAM
MA-372 BOARD
(CONDUCTOR SIDE)
Mode Playback
Signal Alignment tape: SP color bar portion
Measurement point CH1: CN262 pin 1 (PB RF)
CH2: CN262 pin 2 (RF SWP)
Measuring instrument Oscilloscope
Adjusting element Remote commander CH+/–
Specified value A=minimize
[Adjustment Method]
1) Playback the alignment tape.
2) Short CN262 pin 5 to Ground.
3) Check that “A P” is indicated on FL display.
4) Adjust so that part A becomes minimized at CH +/–.
5) Write data in EEPROM by pressing PAUSE button.
6) The display “A P” disappears and then the Adjustment mode
terminates.
A
CH1
PB RF
CH2
RF SWP
Fig. 6-2-3
2-4. AUDIO SYSTEM ADJUSTMENT
[Connecting Instruments]
CN500
3 A (L) OUT
4 A GND
J481 AUDIO IN
Audio oscillator
600 Ω
Attenuator
VTR
Audio level meter
or distortion mete
47 kΩ
2-4-3. E-E Output Level Check
[Adjustment purpose]
Confirm that the output level adjust the reference input is within the
specification.
Mode E-E
Signal 400 Hz, –6.3 dBs
Measurement point CN500 Pin 3
Measuring instrument Audio level meter
Specified value –6.3 ± 2 dBs
[Check Method]
1) Input signal of 400 Hz and –6.3 dBs to the J480.
2) Check that the audio output level is –6.3 ± 2 dBs.
2-4-4. Frequency Response Check
[Adjustment purpose]
Confirm that the frequency characteristic is within the specification.
Mode REC and PB (SP mode)
Signal 400 Hz, –26.3 dBs
7 kHz, –26.3 dBs
Measurement point CN500 Pin 3
Measuring instrument Audio level meter
Specified value 0 ± 3 dB
Note: Tape path adjustment must have been completed.
[Confirmation Method]
1) Supply a signal of 400 Hz, –26.3 dBs to J481 AUDIO IN.
2) Connect the audio level meter to CN500 Pin 3.
3) Adjust the attenuator so that the audio level meter will indicate
–26.3 dBs.
4) Make recording in the SP mode.
5) Set an audio line input signal to 7 kHz and make recording.
6) Playback a recorded portion, and measure output levels at 400
Hz and 7 kHz.
7) Confirm that the 7 kHz playback output lev el within a range of
the 400 Hz playback output level 0 dB to ± 3 dB.
JK-179 BOARD
(CONDUCTOR SIDE)
Fig. 6-2-4
6-3
6-4
Page 62
MEMO
6-6E
Page 63
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SECTION 7
REPAIR PARTS LIST
7-1. EXPLODED VIEWS
NOTE:
• -XX, -X mean standardized parts, so they may
have some differences from the original one.
• Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
7-1-1. FRONT PANEL AND UPPER CASE SECTION
18
14
15
• The mechanical parts with no reference number
in the exploded views are not supplied.
17
10
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
8
9
8
19
6
7
2
16
10
11
12
4
1
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
1 X-3950-180-1 PANEL ASSY, FRONT (SE450D)
1 X-3950-181-1 PANEL ASSY, FRONT (SE450B)
1 X-3950-182-1 PANEL ASSY, FRONT (SE450P)
1 X-3950-183-1 PANEL ASSY, FRONT (SE300G)
1 X-3950-184-1 PANEL ASSY, FRONT (SE300D1/D2)
1 X-3950-185-1 PANEL ASSY, FRONT (SE250D)
1 X-3950-186-1 PANEL ASSY, FRONT (SE250B)
1 X-3950-187-1 PANEL ASSY, FRONT (SE250P)
1 X-3950-188-1 PANEL ASSY, FRONT (SX250D)
1 X-3950-189-1 PANEL ASSY, FRONT (SE200G/I)
1 X-3950-190-1 PANEL ASSY, FRONT (SE200V1/V2)
1 X-3950-191-1 PANEL ASSY, FRONT (SE100A1/A2)
1 X-3950-192-1 PANEL ASSY, FRONT (SE450K)
1 X-3950-193-1 PANEL ASSY, FRONT (SE400K)
1 X-3950-194-1 PANEL ASSY, FRONT (SE100K)
1 X-3950-195-1 PANEL ASSY, FRONT (SX100K)
2 3-053-436-01 EMBLEM (NO.5), SONY
(EXCEPT:SE200G/I,SE300G,SX100K,SX250D)
3 3-057-833-01 BUTTON, CENTER
(EXCEPT:SE200G/I,SE250B,SE300G,SE450B,SX100K,SX250D)
3 3-057-833-11 BUTTON, CENTER (SE250B,SE450B)
3 3-057-833-21 BUTTON, CENTER
4 3-057-845-01 PLATE, FROSTED
4 3-057-845-11 PLATE, FROSTED
5 3-058-056-01 SEAL,INSULATOR
6 3-953-432-01 SPRING (GE), FL
7 3-057-841-21 DOOR,CASSETTE
(EXCEPT:SE200G/I,SE300G,SX100K,SX250D)
7 3-057-841-31 DOOR,CASSETTE
3
5
(SE200G/I,SE300G,SX100K,SX250D)
(EXCEPT:SE100A1/A2/K,SE400K,SX100K)
(SE100A1/A2/K,SE400K,SX100K)
(SE200G/I,SE300G,SX100K,SX250D)
13
8 3-363-099-01 SCREW(CASE 3 TP2)
(EXCEPT:SE200G/I,SE300G,SX100K,SX250D)
8 3-363-099-11 SCREW(CASE 3 TP2)
(SE200G/I,SE300G,SX100K,SX250D)
9 3-058-423-21 CASE,UPPER (E)
(EXCEPT:SE200G/I,SE300G,SX100K)
9 3-058-423-31 CASE,UPPER (E)(SE200G/I,SE300G,SX100K)
10 4-921-277-41 SCREW (B2.6X8), TAPPING, BIND
(SE300D1/D2/G,SE450B/D/P)
11 A-6794-738-A KK-22A MOUNT (SE300D1/D2/G,SE450B/D/P)
12 3-057-848-01 ESCUTCHEON, DIAL TIMER
(SE300D1/D2,SE450B/D/P)
12 3-057-848-11 ESCUTCHEON, DIAL TIMER (SE300G)
13 3-057-852-01 KNOB, DIAL TIMER (SE300D1/D2,SE450B/D/P)
13 3-057-852-11 KNOB, DIAL TIMER (SE300G)
14 A-6794-737-A JK-179A MOUNT (SE300D1/D2/G)
15 3-057-846-01 HOLDER, PIN JACK (SE300D1/D2)
15 3-057-846-11 HOLDER, PIN JACK (SE300G)
16 3-057-847-01 LENSSS (SE300D1/D2/G)
17 1-418-008-11 COMMANDER, STANDARD (RMT-V257)
(SE100A1/A2/K,SE200V1/V2,SX100K)
17 1-418-008-21 COMMANDER, STANDARD(RMT-V257A)
(SE250B)
17 1-418-008-31 COMMANDER, STANDARD(RMT-V257B)
(SE200G/I/D/P,SE450D/P/K,SX250D)
17 1-418-008-41 COMMANDER, STANDARD(RMT-V257C)
(SE450B)
17 1-418-781-11 COMMANDER, STANDARD (RMT-V287)
(SE300D1/D2/G)
18 3-709-433-01 COVER, REMOTE CONTROL BATTERY
(FOR RMT-V257,V257A,V257B,V257C,V287)
019 1-777-854-21 CORD, POWER
7-1
Page 64
7-1-2. CHASSIS SECTION
52
#1
52
#1
53
51
not supplied
not supplied
52
#1
not supplied
52
54
55
52
52
56
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
51 A-6713-557-A MA-372A COMPLETE PC BOARD
(SE100K,SX100K)
51 A-6713-558-A MA-372B COMPLETE PC BOARD (SE450K)
51 A-6713-559-A MA-372C COMPLETE PC BOARD (SE400K)
51 A-6713-560-A MA-372D COMPLETE PC BOARD (SE100A1/A2)
51 A-6713-561-A MA-372E COMPLETE PC BOARD (SE200G)
51 A-6713-562-A MA-372F COMPLETE PC BOARD (SE200I)
51 A-6713-563-A MA-372G COMPLETE PC BOARD (SE200V1/V2)
51 A-6713-564-A MA-372H COMPLETE PC BOARD
(SE250D,SX250D)
51 A-6713-565-A MA-372I COMPLETE PC BOARD (SE250P)
51 A-6713-566-A MA-372J COMPLETE PC BOARD (SE250B)
51 A-6713-567-A MA-372K COMPLETE PC BOARD (SE300D1/D2)
51 A-6713-568-A MA-372L COMPLETE PC BOARD (SE300G)
51 A-6713-569-A MA-372M COMPLETE PC BOARD (SE450D)
51 A-6713-570-A MA-372N COMPLETE PC BOARD (SE450P)
51 A-6713-571-A MA-372O COMPLETE PC BOARD (SE450B)
52 3-970-608-21 SUMITITE (B3), +BV
53 1-792-019-11 CABLE, FLAT (FFM-36)
54 1-792-018-11 CABLE, FLAT (FAC-8)
55 3-057-836-01 PANEL, REAR (E) (SE300D1/D2)
55 3-057-836-11 PANEL, REAR (E)
55 3-057-836-21 PANEL, REAR (E) (SE100A1/A2)
55 3-057-836-31 PANEL, REAR (E) (SE300G)
55 3-057-836-41 PANEL, REAR (E)
056 1-468-459-11 POWER BLOCK
Note : The components identified by mark 0 or dotted
7-2
(SE100K,SE200G/I/V1/V2,SE400K,SE450K,SX100K)
line with mark 0 are critical for safety.
Replace only with part number specified.
(SE250B/D/P,SE450B/D/P,SX250D)
Page 65
7-1-3. MECHANISM DECK SECTION-1
707
708
706
726
705
704
703
723
722
709
#701
710
not
supplied
712
711
701
716
713
714
702
701
721
720
725
724
719
715
717
718
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
701 3-977-509-01 WASHER, THRUST
702 3-977-507-01 TABLE, REEL (S)
703 3-977-508-01 TABLE, REEL (T)
704 1-500-144-11 HEAD, FE
705 3-977-495-01 SHAFT TG2
714 3-977-514-01 OPENER, LID
715 3-977-441-03 GEAR, PINCH PRESSING
716 3-977-445-02 GEAR, TG8 ARM DRIVING
717 3-977-465-01 SPRING,EXTENSION(RVS BRAKE)
718 X-3947-582-1 ARM ASSY, RVS BRAKE
706 3-977-494-01 HOLDER, FEH
707 A-6759-619-B FL COMPLETE ASSY
708 3-977-535-01 PLATE, LUMINOUS (END SENSOR)
709 3-977-536-01 PLATE, LUMINOUS (TOP SENSOR)
710 3-970-471-01 SPRING (DECK OPEN), TORSION
711 A-6759-863-B PRESS BLOCK ASSY, PINCH
712 3-958-455-01 SPRING (PINCH), TENSION
713 3-977-447-01 GEAR, ELEVATOR
719 3-977-446-01 GEAR, TG8 ARM
720 X-3947-590-1 TG8 ASSY
721 A-6775-791-A ACE BLOCK ASSY (ALPS) (EURO 3)
722 3-974-556-11 +HEXA TT 2.6X9 (TAPER)
723 3-979-508-01 SCREW +HEXA TP SW 3X8
724 3-719-381-01 SCREW (M2X4)
725 3-736-045-01 BEARING (NO FLANG), BALL
726 3-058-999-01 PLATE, DRUM COVER
7-3
Page 66
7-1-4. MECHANISM DECK SECTION-2
771
M901
772
773
753
756
755
754
760
758
757
752
761
766
#701
764
762
763
762
763
#702
765
751
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
751 X-3947-581-4 BRAKE ASSY,MAIN(T)
752 3-977-462-01 SPRING,EXTENTION. (MAIN BRAKE)
753 X-3947-573-1 ARM ASSY, PENDULUM
754 X-3947-580-5 BRAKE ASSY, MAIN(S)
755 3-977-513-02 LEVER, REC. PROOF
756 3-976-767-01 SPRING, TENS. (REC. PROOF)
757 3-977-487-01 BOSS, TG1 FULCRUM
758 X-3950-427-1 TG1 ASSY (SD)
760 3-977-488-01 SPRING (POWER TENSION)
761 A-6750-324-A SHUTTLE (S) BLOCK ASSY (VW32)
762 X-3944-378-1 ROLLER ASSY, GUIDE
763 3-965-178-01 SPRING
764 3-969-632-04 BASE, DRUM
765 A-6750-328-E SHUTTLE (T) BLOCK ASSY (VW32)
766 3-977-501-01 PLATE, LUMINOUS
771 A-6746-074-G ROLLER BLOCK ASSY, HC
772 X-3947-255-1 ROLLER ASSY, HC
773 3-975-724-07 ARM, HC
M901 1-774-359-11 DRUM ASSY DZH-78E-R
(SE100V1/V2/K,SE200V1/V2,SE250B,SX100K)
M901 1-774-361-11 DRUM ASSY DZH-92D-R
(SE200G/I,SE250D/P,SE300D1/D2/G,SX250D)
M901 1-774-362-11 DRUM ASSY DZH-93D-R
(SE400K,SE450B/D/K/P)
7-4
Page 67
7-1-5. MECHANISM DECK SECTION-3
816
815
817
#701
833
831
804
832
812
809
805
811
810
808
806
803
814
807
M902
813
828
827
826
829
818
836
803
819
820
821
822
823
824
830
M903
803
802
801
825
835
#703
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
801 3-977-437-01 RETAINER,CAM MOTOR
802 X-3947-584-1 ASSY, REEL DIRECT
803 3-977-443-01 WASHER, STOPPER
804 3-977-438-01 WORM - WHEEL
805 3-977-506-01 ARM, LIMITTER SELECTION
806 3-977-444-01 GEAR, PINCH TRANSMISSION
807 3-977-515-01 GUIDE, FL SLIDER
808 3-977-517-01 PLATE, SLIDE, FL
809 3-977-519-01 SPRING, TENS. (LIMIT, FL)
810 3-977-518-02 PLATE, LIMITTER, FL
811 3-977-516-01 HOLDER, FL SLIDER
812 3-977-877-01 PLATE, RETAINER
813 3-977-504-01 GEAR, CLUTCH
814 X-3947-585-1 GEAR ASSY, PULLEY
815 3-977-510-01 BELT, RUBBER
816 3-056-952-11 WASHER, STOPPER
817 3-977-439-01 GEAR, CAM
818 3-977-442-03 SLIDER
819 3-977-455-01 GEAR, LOADING(T)
820 3-977-456-03 SPRING, TORSION (LOAD T)
821 X-3947-579-1 LEVER ASSY, LOADING(T)
822 3-977-451-01 GEAR, LOADING(S)
823 3-977-452-01 SPRING, TORSION (LOAD S)
824 X-3947-578-1 LEVER ASSY, LOADING(S)
825 X-3947-576-2 CHASSIS ASSY, MECHANICAL
826 3-977-468-01 SHAFT, CAPSTAN BRAKE
827 3-977-467-02 SPRING, CAP BRAKE
828 X-3947-583-1 BRAKE ASSY, CAPSTAN
829 3-977-489-01 ARM, TG1 DRIVING
830 A-6759-616-A GEAR BLOCK ASSY, LOADING(S)
831 1-541-309-11 MOTOR, L (RF-370C) (LOADING)
832 1-766-723-21 CONNECTOR, BOARD TO BOARD 3P
833 3-977-436-01 WORM
835 3-989-917-01 SPACER (REC PROOF)
836 3-056-824-01 WASHER, STOPPER
M902 1-698-971-11 MOTOR, DC (CAPSTAN)
M903 X-3947-577-1 MOTOR ASSY, CAM (LOADING)
7-5
Page 68
KK-22JK-179
MA-372
7-2. ELECTRICAL PARTS LIST
NOTE:
• Due to standardization, replacements in the
parts list may be different from the parts
specified in the diagrams or the components
used on the set.
• -XX, -X mean standardized parts, so they may
have some difference from the original one.
• Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
• CAPACITORS:
uF: µF
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
A-6794-737-A JK-179A BOARD, COMPLETE (SE300)
***********************
< CAPACITOR >
C481 1-163-009-11 CERAMIC CHIP 0.001uF 10% 50V
C493 1-163-009-11 CERAMIC CHIP 0.001uF 10% 50V
< DIODE >
D481 8-719-067-40 DIODE STZ6.8N-T146
D491 8-719-067-40 DIODE STZ6.8N-T146
D493 8-719-070-59 DIODE PDZ6.8B-115
< JACK >
J481 1-695-451-11 JACK, PIN 2P (LINE-2 IN)
< RESISTOR >
R480 1-216-022-00 METAL CHIP 75 5% 1/10W
R491 1-216-041-00 METAL CHIP 470 5% 1/10W
< SWITCH >
S481 1-771-410-21 SWITCH, TACT (EJECT)
S482 1-771-410-21 SWITCH, TACT (POWER)
************************************************************
A-6794-738-A KK-22A BOARD, COMPLETE
**********************
• RESISTORS
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F: nonflammable
• COILS
uH: µH
• SEMICONDUCTORS
In each case, u: µ, for example:
uA...: µA... , uPA... , µPA... ,
uPB... , µPB... , uPC... , µPC... ,
uPD..., µPD...
(SE300,SE450B/D/P)
* 3-960-273-01 SPACER, TOP END
* 3-960-274-01 SPACER, LED
When indicating parts by reference number,
please include the board name.
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
A-6713-563-A MA-372G COMPLETE BOARD, COMPLETE
(SE200V1/V2)
********************************
A-6713-564-A MA-372H COMPLETE BOARD, COMPLETE
(SE250D,SX250D)
********************************
A-6713-565-A MA-372I COMPLETE BOARD, COMPLETE
(SE250P)
********************************
A-6713-566-A MA-372J COMPLETE BOARD, COMPLETE
(SE250B)
********************************
A-6713-567-A MA-372K COMPLETE BOARD, COMPLETE
(SE30OD1/D2)
********************************
A-6713-568-A MA-372L COMPLETE BOARD, COMPLETE
(SE300G)
********************************
A-6713-569-A MA-372M COMPLETE BOARD, COMPLETE
(SE450D)
********************************
A-6713-570-A MA-372N COMPLETE BOARD, COMPLETE
(SE450P)
********************************
A-6713-571-A MA-372O COMPLETE BOARD, COMPLETE
(SE450B)
********************************
3-057-854-01 BASE, FL
3-058-480-01 HOLDER, FLO
S410 1-418-156-11 ENCODER, ROTARYRY (DIAL TIMER)
************************************************************
A-6713-557-A MA-372A COMPLETE BOARD, COMPLETE
(SE100K,SX100K)
********************************
A-6713-558-A MA-372B COMPLETE BOARD, COMPLETE
(SE450K)
********************************
A-6713-559-A MA-372C COMPLETE BOARD, COMPLETE
(SE400K)
********************************
A-6713-560-A MA-372D COMPLETE BOARD, COMPLETE
(SE100A1/A2)
********************************
A-6713-561-A MA-372E COMPLETE BOARD, COMPLETE
(SE200G)
********************************
A-6713-562-A MA-372F COMPLETE BOARD, COMPLETE
(SE200I)
********************************
< CAPACITOR >
C100 1-163-009-11 CERAMIC CHIP 0.001uF 10% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C101 1-163-009-11 CERAMIC CHIP 0.001uF 10% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C102 1-163-009-11 CERAMIC CHIP 0.001uF 10% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C103 1-128-057-11 ELECT 330uF 20.00% 6.3V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C105 1-163-009-11 CERAMIC CHIP 0.001uF 10% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
7-6
Page 69
MA-372
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
C107 1-124-589-11 ELECT 47uF 20% 16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C108 1-127-573-91 CERAMIC CHIP 1uF 10% 16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C113 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C114 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C115 1-163-038-91 CERAMIC CHIP 0.1uF 25V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C120 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C121 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C122 1-104-664-11 ELECT 47uF 20.00% 16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C123 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C131 1-124-589-11 ELECT 47uF 20% 16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C163 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C164 1-126-933-11 ELECT 100uF 20.00% 16V
C165 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C166 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C167 1-163-809-11 CERAMIC CHIP 0.047uF 10% 25V
C168 1-163-235-11 CERAMIC CHIP 22PF 5.00% 50V
C169 1-163-235-11 CERAMIC CHIP 22PF 5.00% 50V
C170 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
C171 1-163-231-11 CERAMIC CHIP 15PF 5.00% 50V
C172 1-163-231-11 CERAMIC CHIP 15PF 5.00% 50V
C173 1-163-007-11 CERAMIC CHIP 680PF 10% 50V
C200 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C201 1-126-960-11 ELECT 1uF 20.00% 50V
C202 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C203 1-163-809-11 CERAMIC CHIP 0.047uF 10% 25V
C204 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C205 1-163-241-11 CERAMIC CHIP 39PF 5% 50V
(SE100,SE200,SE250,SE300,SX100K,SX250D)
C205 1-163-239-11 CERAMIC CHIP 33PF 5.00% 50V
(SE400K,SE450)
C206 1-163-809-11 CERAMIC CHIP 0.047uF 10% 25V
C207 1-163-237-11 CERAMIC CHIP 27PF 5.00% 50V
C208 1-126-960-11 ELECT 1uF 20.00% 50V
C209 1-163-257-11 CERAMIC CHIP 180PF 5.00% 50V
C210 1-163-237-11 CERAMIC CHIP 27PF 5.00% 50V
C211 1-109-982-11 CERAMIC CHIP 1uF 10.00% 10V
C212 1-163-809-11 CERAMIC CHIP 0.047uF 10% 25V
C133 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C134 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C140 1-126-933-11 ELECT 100uF 20.00% 16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C141 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C142 1-163-037-11 CERAMIC CHIP 0.022uF 10% 25V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C143 1-126-965-11 ELECT 22uF 20.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C144 1-126-965-11 ELECT 22uF 20.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C145 1-126-933-11 ELECT 100uF 20.00% 16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C146 1-164-161-11 CERAMIC CHIP 0.0022uF 10% 100V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C148 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C213 1-109-982-11 CERAMIC CHIP 1uF 10.00% 10V
C214 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
C215 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C216 1-163-037-11 CERAMIC CHIP 0.022uF 10% 25V
C217 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C218 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C219 1-163-038-91 CERAMIC CHIP 0.1uF 25V
C220 1-104-664-11 ELECT 47uF 20.00% 16V
C221 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
(SE100,SE200V1/V2,SE250B,SE400K,SE450,SX100K)
C221 1-109-982-11 CERAMIC CHIP 1uF 10.00% 10V
(SE200G/I,SE250D/P,SE300,SX250D)
C222 1-109-982-11 CERAMIC CHIP 1uF 10.00% 10V
C223 1-163-038-91 CERAMIC CHIP 0.1uF 25V
C224 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C225 1-124-589-11 ELECT 47uF 20% 16V
C226 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C227 1-124-589-11 ELECT 47uF 20% 16V
C228 1-163-131-00 CERAMIC CHIP 390PF 5% 50V
C229 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
C230 1-163-038-91 CERAMIC CHIP 0.1uF 25V
C231 1-109-982-11 CERAMIC CHIP 1uF 10.00% 10V
C232 1-109-982-11 CERAMIC CHIP 1uF 10.00% 10V
C233 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
C234 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C235 1-109-982-11 CERAMIC CHIP 1uF 10.00% 10V
C236 1-163-243-11 CERAMIC CHIP 47PF 5.00% 50V
C149 1-126-934-11 ELECT 220uF 20.00% 16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C150 1-126-963-11 ELECT 4.7uF 20.00% 50V
C160 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C161 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C162 1-104-905-11 CAPACITOR 0.22F 5.5V
C237 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
C238 1-124-261-00 ELECT 10uF 20% 50V
C239 1-163-243-11 CERAMIC CHIP 47PF 5.00% 50V
(SE300)
C240 1-163-243-11 CERAMIC CHIP 47PF 5.00% 50V
(SE250,SE300,SE450B/D/P,SX250D)
C241 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
(SE300)
7-7
Page 70
MA-372
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
C242 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
(SE250,SE300,SE450B/D/P,SX250D)
C243 1-163-809-11 CERAMIC CHIP 0.047uF 10% 25V
C244 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C245 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
C246 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C247 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C248 1-124-589-11 ELECT 47uF 20% 16V
C249 1-126-157-11 ELECT 10uF 20% 16V
C250 1-124-589-11 ELECT 47uF 20% 16V
C251 1-126-965-11 ELECT 22uF 20.00% 50V
C252 1-109-982-11 CERAMIC CHIP 1uF 10.00% 10V
C253 1-163-133-00 CERAMIC CHIP 470PF 5% 50V
(SE250B,SE450B)
C255 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C271 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE400K,SE450)
C272 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
(SE400K,SE450)
C275 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C276 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
C278 1-163-037-11 CERAMIC CHIP 0.022uF 10% 25V
C279 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
C280 1-124-584-00 ELECT 100uF 20% 10V
C281 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C282 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C283 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C284 1-164-489-11 CERAMIC CHIP 0.22uF 10.00% 16V
C285 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C288 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V
C289 1-163-233-11 CERAMIC CHIP 18PF 5.00% 50V
C350 1-164-489-11 CERAMIC CHIP 0.22uF 10.00% 16V
C351 1-104-664-11 ELECT 47uF 20.00% 16V
C352 1-163-038-91 CERAMIC CHIP 0.1uF 25V
C353 1-164-489-11 CERAMIC CHIP 0.22uF 10.00% 16V
(SE300)
C354 1-126-964-11 ELECT 10uF 20.00% 50V
C355 1-164-489-11 CERAMIC CHIP 0.22uF 10.00% 16V
C356 1-126-966-11 ELECT 33uF 20.00% 16V
C357 1-126-963-11 ELECT 4.7uF 20.00% 50V
C358 1-109-982-11 CERAMIC CHIP 1uF 10.00% 10V
C359 1-163-011-11 CERAMIC CHIP 0.0015uF 10% 50V
C360 1-163-011-11 CERAMIC CHIP 0.0015uF 10% 50V
C362 1-104-664-11 ELECT 47uF 20.00% 16V
C363 1-126-963-11 ELECT 4.7uF 20.00% 50V
C364 1-126-964-11 ELECT 10uF 20.00% 50V
C365 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C366 1-126-960-11 ELECT 1uF 20.00% 50V
C367 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C380 1-137-374-11 MYLAR 0.047uF 5.00% 50V
C381 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C382 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C383 1-104-664-11 ELECT 47uF 20.00% 16V
C420 1-124-589-11 ELECT 47uF 20% 16V
C421 1-163-235-11 CERAMIC CHIP 22PF 5.00% 50V
C422 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
C423 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C424 1-126-157-11 ELECT 10uF 20% 16V
C427 1-104-664-11 ELECT 47uF 20.00% 16V
C500 1-163-017-00 CERAMIC CHIP 0.0047uF 5% 50V
C502 1-163-017-00 CERAMIC CHIP 0.0047uF 5% 50V
C510 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C511 1-104-664-11 ELECT 47uF 20.00% 16V
C512 1-104-664-11 ELECT 47uF 20.00% 16V
C513 1-126-935-11 ELECT 470uF 20.00% 6.3V
C570 1-163-017-00 CERAMIC CHIP 0.0047uF 5% 50V
C571 1-163-017-00 CERAMIC CHIP 0.0047uF 5% 50V
C572 1-163-017-00 CERAMIC CHIP 0.0047uF 5% 50V
C580 1-124-261-00 ELECT 10uF 20% 50V
(SE250,SE300,SE450B/D/P,SX250D)
C581 1-126-964-11 ELECT 10uF 20.00% 50V
(SE250,SE300,SE450B/D/P,SX250D)
C582 1-126-964-11 ELECT 10uF 20.00% 50V
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
C583 1-126-964-11 ELECT 10uF 20.00% 50V
(SE250,SE300,SE450B/D/P,SX250D)
C584 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
(SE250,SE300,SE450B/D/P,SX250D)
C585 1-126-964-11 ELECT 10uF 20.00% 50V
(SE250,SE300,SE450B/D/P,SX250D)
C586 1-126-964-11 ELECT 10uF 20.00% 50V
(SE250,SE300,SE450B/D/P,SX250D)
C587 1-126-964-11 ELECT 10uF 20.00% 50V
(SE250,SE300,SE450B/D/P,SX250D)
C588 1-126-964-11 ELECT 10uF 20.00% 50V
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
C601 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C603 1-128-131-11 ELECT 22uF 20.00% 50V
C604 1-104-664-11 ELECT 47uF 20.00% 16V
C605 1-126-964-11 ELECT 10uF 20.00% 50V
C607 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C611 1-104-664-11 ELECT 47uF 20.00% 16V
C612 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C613 1-126-933-11 ELECT 100uF 20.00% 16V
C615 1-126-965-11 ELECT 22uF 20.00% 50V
C620 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
C660 1-163-233-11 CERAMIC CHIP 18PF 5.00% 50V
C661 1-163-233-11 CERAMIC CHIP 18PF 5.00% 50V
C662 1-163-017-00 CERAMIC CHIP 0.0047uF 5% 50V
C663 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C664 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
C665 1-163-245-11 CERAMIC CHIP 56PF 5.00% 50V
(SE100K,SE250B,SE400K,SE450B/K,SX100K)
C666 1-163-135-00 CERAMIC CHIP 560PF 5% 50V
C667 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C668 1-124-584-00 ELECT 100uF 20% 10V
C669 1-163-016-00 CERAMIC CHIP 0.0039uF 10% 50V
C670 1-109-982-11 CERAMIC CHIP 1uF 10.00% 10V
C671 1-163-235-11 CERAMIC CHIP 22PF 5.00% 50V
C672 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C701 1-126-964-11 ELECT 10uF 20.00% 50V
C704 1-126-964-11 ELECT 10uF 20.00% 50V
C705 1-163-809-11 CERAMIC CHIP 0.047uF 10% 25V
C708 1-104-664-11 ELECT 47uF 20.00% 16V
C709 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
C710 1-126-965-11 ELECT 22uF 20.00% 50V
(SE100A1/A2,SE200,SE250,SE300,SE450B/D/P,SX250D)
C721 1-128-131-11 ELECT 22uF 20.00% 50V
C752 1-126-933-11 ELECT 100uF 20.00% 16V
C753 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
C754 1-126-935-11 ELECT 470uF 20.00% 6.3V
7-8
Page 71
MA-372
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
C801 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE200,SE250,SE300,SE450,SX250D)
C850 1-163-038-91 CERAMIC CHIP 0.1uF 25V
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
C851 1-124-261-00 ELECT 10uF 20% 50V
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
C852 1-164-161-11 CERAMIC CHIP 0.0022uF 10% 100V
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
C853 1-163-989-11 CERAMIC CHIP 0.033uF 10% 25V
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
C855 1-164-489-11 CERAMIC CHIP 0.22uF 10.00% 16V
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
C856 1-163-038-91 CERAMIC CHIP 0.1uF 25V
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
C970 1-163-259-91 CERAMIC CHIP 220PF 5.00% 50V
(SE250B,SE450B)
C971 1-124-257-00 ELECT 2.2uF 20% 50V
(SE250B,SE450B)
C972 1-163-017-00 CERAMIC CHIP 0.0047uF 5% 50V
(SE250B,SE450B)
C973 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE250B,SE450B)
C974 1-109-982-11 CERAMIC CHIP 1uF 10.00% 10V
(SE250B,SE450B)
C975 1-163-037-11 CERAMIC CHIP 0.022uF 10% 25V
(SE250B,SE450B)
C976 1-163-259-91 CERAMIC CHIP 220PF 5.00% 50V
(SE250B,SE450B)
C977 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE250B,SE450B)
C978 1-163-017-00 CERAMIC CHIP 0.0047uF 5% 50V
(SE250B,SE450B)
C979 1-163-255-11 CERAMIC CHIP 150PF 5.00% 50V
(SE250B,SE450B)
C980 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
(SE250B,SE450B)
C981 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE250B,SE450B)
C982 1-163-007-11 CERAMIC CHIP 680PF 10% 50V
(SE250B,SE450B)
C983 1-163-009-11 CERAMIC CHIP 0.001uF 10% 50V
(SE250B,SE450B)
C984 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE250B,SE450B)
C985 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V
(SE250B,SE450B)
C986 1-126-157-11 ELECT 10uF 20% 16V
(SE250B,SE450B)
C987 1-107-823-11 CERAMIC CHIP 0.47uF 10.00% 16V
(SE250B,SE450B)
C988 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V
(SE250B,SE450B)
C991 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
(SE250B,SE450B)
C992 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE250B,SE450B)
C993 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE250B,SE450B)
C994 1-163-021-91 CERAMIC CHIP 0.01uF 10.00% 50V
(SE250B,SE450B)
C995 1-126-157-11 ELECT 10uF 20% 16V
(SE250B,SE450B)
C996 1-163-227-11 CERAMIC CHIP 10PF 0.50PF 50V
(SE250B,SE450B)
< CONNECTOR >
CN101 1-695-328-11 HOUSING, CONNECTOR 5P
CN102 1-779-723-11 CONNECTOR, BOARD TO BOARD 9P
* CN104 1-766-716-11 CONNECTOR, BOARD TO BOARD 3P
CN161 1-506-469-11 PIN, CONNECTOR 4P
CN261 1-793-919-11 CONNECTOR, FFC/FPC 6P
* CN262 1-560-893-00 PIN, CONNECTOR 5P
CN350 1-784-486-11 CONNECTOR, FFC/FPC 7P
CN351 1-506-468-11 PIN, CONNECTOR 3P
CN460 1-506-469-11 PIN, CONNECTOR 4P (SE300,SE450B/D/P)
CN500 1-793-918-11 CONNECTOR, SQUARE TYPE 21P
* CN501 1-568-955-11 PIN, CONNECTOR 6P (SE300)
CN570 1-793-918-11 CONNECTOR, SQUARE TYPE 21P
(SE250,SE300,SE450B/D/P,SX250D)
CN570 1-794-172-11 CONNECTOR, SQUARE TYPE 21P
(SE250,SE300,SE450B/D/P,SX250D)
CN600 1-569-340-11 CONNECTOR, BOARD TO BOARD 11P
< DIODE >
D100 8-719-048-26 DIODE GL528V1
D110 8-719-200-82 DIODE MPG06D-6052PKG3
D140 8-719-988-61 DIODE 1SS355TE-17
D420 8-719-045-62 DIODE SLR-342VCT31 (SE300)
D421 8-719-988-61 DIODE 1SS355TE-17 (SE300)
D424 8-719-067-40 DIODE STZ6.8N-T146
D500 8-719-067-40 DIODE STZ6.8N-T146
D504 8-719-067-40 DIODE STZ6.8N-T146
D505 8-719-070-59 DIODE PDZ6.8B-115
D508 8-719-070-59 DIODE PDZ6.8B-115
D511 8-719-070-59 DIODE PDZ6.8B-115
D512 8-719-977-40 DIODE UDZ-TE-17-13B
D513 8-719-067-40 DIODE STZ6.8N-T146
D514 8-719-977-40 DIODE UDZ-TE-17-13B
D515 8-719-067-40 DIODE STZ6.8N-T146
D540 8-719-067-40 DIODE STZ6.8N-T146
(SE250,SE300,SE450B/D/P,SX250D)
D542 8-719-067-40 DIODE STZ6.8N-T146
(SE250,SE300,SE450B/D/P,SX250D)
D544 8-719-070-59 DIODE PDZ6.8B-115
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
D570 8-719-070-59 DIODE PDZ6.8B-115
(SE250,SE300,SE450B/D/P,SX250D)
D571 8-719-067-40 DIODE STZ6.8N-T146
(SE250,SE300,SE450B/D/P,SX250D)
D575 8-719-067-40 DIODE STZ6.8N-T146
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
D576 8-719-977-40 DIODE UDZ-TE-17-13B
(SE250,SE300,SE450B/D/P,SX250D)
D590 8-719-988-61 DIODE 1SS355TE-17
D591 8-719-988-61 DIODE 1SS355TE-17
D600 8-719-988-61 DIODE 1SS355TE-17
D601 8-719-988-61 DIODE 1SS355TE-17
D602 8-719-070-56 DIODE PDZ5.1B-115
D603 8-719-075-84 DIODE S1G-G2P
(SE250,SE300,SE450B/D/P,SX250D)
D606 8-719-075-84 DIODE S1G-G2P
D607 8-719-075-84 DIODE S1G-G2P
7-9
Page 72
MA-372
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
D702 8-719-982-26 DIODE MTZJ-T-77-33
D750 8-719-075-84 DIODE S1G-G2P
D800 8-719-988-61 DIODE 1SS355TE-17
(SE200,SE250,SE300,SE450,SX250D)
< TERMINAL BOARD >
ET600 1-537-770-21 TERMINAL BOARD, GROUND
< FILTER >
FL500 1-236-163-11 ENCAPSULATED COMPONENT
FL502 1-236-163-11 ENCAPSULATED COMPONENT
FL570 1-236-163-11 ENCAPSULATED COMPONENT
(SE250,SE300,SE450B/D/P,SX250D)
FL572 1-236-163-11 ENCAPSULATED COMPONENT
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
< IC >
IC130 8-759-645-07 IC LB1943N
IC160 8-759-248-87 IC MM1256XF-BE
IC161 8-759-575-72 IC M24C08-WMN6T
IC162 8-759-638-61 IC M37760MFH210GP
(SE100,SE400K,SX100K)
IC162 8-759-638-62 IC M37760MFH215GP
(SE200,SE250,SE300,SE450,SX250D)
IC200 8-759-638-71 IC LA71562M-MPB
IC260 8-759-549-79 IC LA70001
(SE100,SE200,SE250,SE300,SX100K,SX250D)
IC260 8-759-564-36 IC LA70011 (SE400K,SE450)
IC350 8-759-499-30 IC BA7755AF-E2
IC420 8-759-547-59 IC M35500BGP
IC460 8-749-015-48 IC RPM6940
IC580 8-759-009-07 IC MC14053BFEL
(SE250,SE300,SE450B/D/P,SX250D)
0IC601 8-759-438-18 IC PQ12RD08
IC850 8-759-484-61 IC SDA5650X-GEG
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
IC970 8-759-438-17 IC LA7337 (SE250B,SE450B)
< JUMPER RESISTOR >
JR001 1-216-296-91 SHORT 0
JR005 1-216-296-91 SHORT 0
JR006 1-216-296-91 SHORT 0
JR008 1-216-296-91 SHORT 0
JR009 1-216-296-91 SHORT 0
JR002 1-216-296-91 SHORT 0 (SE250B,SE450B)
JR003 1-216-296-91 SHORT 0
(SE250,SE300,SE450B/D/P,SX250D)
JR004 1-216-296-91 SHORT 0
(SE250,SE300,SE450B/D/P,SX250D)
JR007 1-216-296-91 SHORT 0 (SE250B,SE450B)
JR010 1-216-296-91 SHORT 0
JR011 1-216-296-91 SHORT 0
JR012 1-216-296-91 SHORT 0
JR013 1-216-296-91 SHORT 0
JR016 1-216-296-91 SHORT 0
JR014 1-216-296-91 SHORT 0 (SE250B,SE450B)
JR015 1-216-296-91 SHORT 0 (SE250B,SE450B)
JR017 1-216-296-91 SHORT 0 (SE250B,SE450B)
JR018 1-216-296-91 SHORT 0
(SE250,SE300,SE450B/D/P,SX250D)
JR019 1-216-296-91 SHORT 0
(SE250,SE300,SE450B/D/P,SX250D)
JR020 1-216-296-91 SHORT 0
JR021 1-216-296-91 SHORT 0
JR022 1-216-296-91 SHORT 0
JR024 1-216-296-91 SHORT 0
JR025 1-216-296-91 SHORT 0
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
JR026 1-216-296-91 SHORT 0
JR027 1-216-296-91 SHORT 0
JR028 1-216-296-91 SHORT 0
JR029 1-216-296-91 SHORT 0
JR023 1-216-296-91 SHORT 0 (SE250B,SE450B)
JR030 1-216-296-91 SHORT 0
JR031 1-216-296-91 SHORT 0
JR032 1-216-296-91 SHORT 0
JR034 1-216-296-91 SHORT 0
JR036 1-216-296-91 SHORT 0
JR038 1-216-296-91 SHORT 0
JR039 1-216-296-91 SHORT 0
JR033 1-216-296-91 SHORT 0
(SE250,SE300,SE450B/D/P,SX250D)
JR035 1-216-296-91 SHORT 0 (SE250B,SE450B)
JR040 1-216-296-91 SHORT 0
JR042 1-216-296-91 SHORT 0
JR043 1-216-296-91 SHORT 0
JR044 1-216-296-91 SHORT 0
JR041 1-216-296-91 SHORT 0
(SE250,SE300,SE450B/D/P,SX250D)
JR201 1-216-295-91 SHORT 0
JR202 1-216-295-91 SHORT 0
JR203 1-216-295-91 SHORT 0
JR204 1-216-295-91 SHORT 0
JR205 1-216-295-91 SHORT 0
JR206 1-216-295-91 SHORT 0
JR207 1-216-295-91 SHORT 0
JR209 1-216-295-91 SHORT 0
JR208 1-216-295-91 SHORT 0
(SE250,SE300,SE450B/D/P,SX250D)
JR210 1-216-295-91 SHORT 0
JR211 1-216-295-91 SHORT 0
JR212 1-216-295-91 SHORT 0
JR213 1-216-295-91 SHORT 0
JR216 1-216-295-91 SHORT 0
JR218 1-216-295-91 SHORT 0
JR219 1-216-295-91 SHORT 0
JR214 1-216-295-91 SHORT 0 (SE250B,SE450B)
JR215 1-216-295-91 SHORT 0 (SE250B,SE450B)
JR217 1-216-295-91 SHORT 0
(SE250,SE300,SE450B/D/P,SX250D)
JR220 1-216-295-91 SHORT 0
JR221 1-216-295-91 SHORT 0
JR222 1-216-295-91 SHORT 0
7-10
Note : The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
Page 73
MA-372
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
JR226 1-216-295-91 SHORT 0
JR227 1-216-295-91 SHORT 0
JR228 1-216-295-91 SHORT 0
JR229 1-216-295-91 SHORT 0
JR223 1-216-295-91 SHORT 0
(SE250,SE300,SE450B/D/P,SX250D)
PH100 8-749-015-86 PHOTO INTERRUPTER GP3S120S
PH101 8-749-015-86 PHOTO INTERRUPTER GP3S120S
< PHOTO INTERRUPTER >
< IC LINK >
JR230 1-216-295-91 SHORT 0
JR231 1-216-296-91 SHORT 0
JR232 1-216-296-91 SHORT 0
< JUMPER RESISTOR >
JS580 1-216-295-91 SHORT 0
(SE100,SE200,SE400K,SE450K,SX100K)
JS581 1-216-295-91 SHORT 0
(SE100,SE200,SE400K,SE450K,SX100K)
< COIL >
L140 1-414-936-21 INDUCTOR 22uH
L160 1-414-936-21 INDUCTOR 22uH
L161 1-414-936-21 INDUCTOR 22uH
L200 1-414-946-21 INDUCTOR 39uH
L201 1-414-940-21 INDUCTOR 100uH
L202 1-414-934-21 INDUCTOR 10uH
L203 1-414-934-21 INDUCTOR 10uH
L204 1-414-934-21 INDUCTOR 10uH
L205 1-414-934-21 INDUCTOR 10uH
L206 1-414-938-21 INDUCTOR 47uH (SE250B,SE450B)
L270 1-414-940-21 INDUCTOR 100uH
L271 1-414-930-21 INDUCTOR 2.2uH
L350 1-414-940-21 INDUCTOR 100uH
L380 1-414-940-21 INDUCTOR 100uH
L460 1-414-938-21 INDUCTOR 47uH
L510 1-414-940-21 INDUCTOR 100uH
L580 1-414-940-21 INDUCTOR 100uH
(SE250,SE300,SE450B/D/P,SX250D)
L601 1-414-934-21 INDUCTOR 10uH
L660 1-414-930-21 INDUCTOR 2.2uH
L661 1-414-936-21 INDUCTOR 22uH
(SE100K,SE250B,SE400K,SE450B/K,SX100K)
0PS120 1-532-605-00 LINK, IC 0.4A
0PS600 1-532-637-00 LINK, IC 1.0A
0PS601 1-532-605-00 LINK, IC 0.4A
0PS603 1-532-727-11 LINK, IC 0.25A
0PS602 1-532-727-11 LINK, IC 0.25A
(SE250,SE300,SE450B/D/P,SX250D)
< TRANSISTOR >
Q100 8-729-043-84 TRANSISTOR PT380F3
Q101 8-729-043-84 TRANSISTOR PT380F3
Q102 8-729-281-53 TRANSISTOR 2SC1815GR-TPE2
Q103 1-801-806-11 TRANSISTOR DTC144EKA-T146
Q104 8-729-216-22 TRANSISTOR 2PB709AR-115
Q200 8-729-422-33 TRANSISTOR 2PD601AR-115
Q201 8-729-422-33 TRANSISTOR 2PD601AR-115
Q202 8-729-422-33 TRANSISTOR 2PD601AR-115
Q203 8-729-216-22 TRANSISTOR 2PB709AR-115
Q204 1-801-806-11 TRANSISTOR DTC144EKA-T146
(SE250B,SE450B)
Q350 8-729-281-53 TRANSISTOR 2SC1815GR-TPE2
Q380 8-729-802-91 TRANSISTOR 2SD879-AA
Q501 8-729-027-23 TRANSISTOR DTA114EKA-T146
Q502 1-801-806-11 TRANSISTOR DTC144EKA-T146
Q510 8-729-216-22 TRANSISTOR 2PB709AR-115
Q540 8-729-216-22 TRANSISTOR 2PB709AR-115
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
Q541 8-729-216-22 TRANSISTOR 2PB709AR-115
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
Q580 1-801-806-11 TRANSISTOR DTC144EKA-T146
(SE250,SE300,SE450B/D/P,SX250D)
Q581 1-801-806-11 TRANSISTOR DTC144EKA-T146
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
Q582 1-801-806-11 TRANSISTOR DTC144EKA-T146
(SE250,SE300,SE450B/D/P,SX250D)
L662 1-414-936-21 INDUCTOR 22uH
L663 1-414-936-21 INDUCTOR 22uH
L701 1-414-930-21 INDUCTOR 2.2uH
L720 1-414-939-21 INDUCTOR 68uH
L721 1-414-936-21 INDUCTOR 22uH
L750 1-414-930-21 INDUCTOR 2.2uH
L970 1-414-933-21 INDUCTOR 6.8uH (SE250B,SE450B)
L971 1-414-945-21 INDUCTOR 27uH (SE250B,SE450B)
L972 1-414-938-21 INDUCTOR 47uH (SE250B,SE450B)
L973 1-414-938-21 INDUCTOR 47uH (SE250B,SE450B)
L975 1-414-934-21 INDUCTOR 10uH (SE250B,SE450B)
< FLUORESCENT INDICATOR >
ND420 1-517-832-11 INDICATOR TUBE, FLUORESCENT
(SE100K,SE400K,SE450K,SX100K)
ND420 1-517-833-11 INDICATOR TUBE, FLUORESCENT
(SE100A1/A2,SE200,SE250,SE300,SE450B/D/P,SX250D)
Q583 8-729-422-33 TRANSISTOR 2PD601AR-115
Q591 8-729-422-33 TRANSISTOR 2PD601AR-115
Q600 8-729-018-99 TRANSISTOR 2SD2394-F
0Q601 8-729-140-93 TRANSISTOR 2SB733-T-34
Q602 8-729-140-96 TRANSISTOR 2SD774-T-4
Q603 8-729-422-33 TRANSISTOR 2PD601AR-115
Q604 8-729-119-79 TRANSISTOR 2SC2785TP-FEK
Q605 8-729-027-23 TRANSISTOR DTA114EKA-T146
Q606 1-801-806-11 TRANSISTOR DTC144EKA-T146
Q607 8-729-804-41 TRANSISTOR 2SB1122-ST-TD
Q608 1-801-806-11 TRANSISTOR DTC144EKA-T146
Q611 8-729-422-33 TRANSISTOR 2PD601AR-115
Q612 8-729-804-41 TRANSISTOR 2SB1122-ST-TD
Q613 1-801-806-11 TRANSISTOR DTC144EKA-T146
Q660 8-729-216-22 TRANSISTOR 2PB709AR-115
Note : The components identified by mark 0 or dotted
7-11
line with mark 0 are critical for safety.
Replace only with part number specified.
(SE250,SE300,SE450B/D/P,SX250D)
(SE250,SE300,SE450B/D/P,SX250D)
(SE250,SE300,SE450B/D/P,SX250D)
Page 74
MA-372
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
Q661 8-729-216-22 TRANSISTOR 2PB709AR-115
Q720 8-729-119-76 TRANSISTOR 2SA1309A-QRSTA
Q721 8-729-422-33 TRANSISTOR 2PD601AR-115
Q751 1-801-806-11 TRANSISTOR DTC144EKA-T146
Q752 8-729-216-22 TRANSISTOR 2PB709AR-115
Q800 8-729-216-22 TRANSISTOR 2PB709AR-115
(SE200,SE250,SE300,SE450,SX250D)
Q801 8-729-422-33 TRANSISTOR 2PD601AR-115
(SE200,SE250,SE300,SE450,SX250D)
Q802 8-729-422-33 TRANSISTOR 2PD601AR-115
(SE200,SE250,SE300,SE450,SX250D)
Q803 8-729-422-33 TRANSISTOR 2PD601AR-115
(SE200,SE250,SE300,SE450,SX250D)
Q804 1-801-806-11 TRANSISTOR DTC144EKA-T146
(SE200,SE250,SE300,SE450,SX250D)
Q850 8-729-216-22 TRANSISTOR 2PB709AR-115
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
Q970 8-729-216-22 TRANSISTOR 2PB709AR-115
(SE250B,SE450B)
Q972 8-729-027-23 TRANSISTOR DTA114EKA-T146
(SE250B,SE450B)
Q973 8-729-422-33 TRANSISTOR 2PD601AR-115
(SE250B,SE450B)
Q974 8-729-422-33 TRANSISTOR 2PD601AR-115
(SE250B,SE450B)
R160 1-216-053-00 METAL CHIP 1.5K 5% 1/10W
(SE450D/P)
R160 1-216-061-00 METAL CHIP 3.3K 5% 1/10W
(SE300G,SE200G/I)
R161 1-216-075-00 METAL CHIP 12K 5% 1/10W
(SE30OD1/D2)
R161 1-216-067-00 METAL CHIP 5.6K 5% 1/10W
(SE250D,SX250D)
R161 1-216-071-00 METAL CHIP 8.2K 5% 1/10W
(SE200I)
R161 1-216-295-91 SHORT 0
(SE100,SE250B,SE450P,SX100K)
R161 1-216-061-00 METAL CHIP 3.3K 5% 1/10W
(SE200V1/V2,SE300G,SE450B/K)
R161 1-216-053-00 METAL CHIP 1.5K 5% 1/10W
(SE200G,SE250P,SE400K,SE450D)
R162 1-216-073-00 METAL CHIP 10K 5% 1/10W
R163 1-216-073-00 METAL CHIP 10K 5% 1/10W
R164 1-216-073-00 METAL CHIP 10K 5% 1/10W
R165 1-216-061-00 METAL CHIP 3.3K 5% 1/10W
(SE300,SE450B/D/P)
R166 1-216-061-00 METAL CHIP 3.3K 5% 1/10W
(SE300,SE450B/D/P)
R167 1-216-069-00 METAL CHIP 6.8K 5% 1/10W
R168 1-216-101-00 METAL CHIP 150K 5% 1/10W
Q975 8-729-027-23 TRANSISTOR DTA114EKA-T146
(SE250B,SE450B)
Q976 1-801-806-11 TRANSISTOR DTC144EKA-T146
(SE250B,SE450B)
< RESISTOR >
R100 1-216-077-91 RES-CHIP 15K 5% 1/10W
R101 1-249-413-11 CARBON 470 5% 1/4W F
R102 1-216-077-91 RES-CHIP 15K 5% 1/10W
R103 1-216-081-00 METAL CHIP 22K 5% 1/10W
R104 1-216-049-91 RES-CHIP 1K 5% 1/10W
R105 1-216-057-00 METAL CHIP 2.2K 5% 1/10W
R106 1-249-400-11 CARBON 39 5% 1/4W F
R107 1-249-400-11 CARBON 39 5% 1/4W F
R108 1-216-081-00 METAL CHIP 22K 5% 1/10W
R110 1-216-057-00 METAL CHIP 2.2K 5% 1/10W
R111 1-216-089-91 RES-CHIP 47K 5% 1/10W
R114 1-216-089-91 RES-CHIP 47K 5% 1/10W
R115 1-216-089-91 RES-CHIP 47K 5% 1/10W
R120 1-216-089-91 RES-CHIP 47K 5% 1/10W
R121 1-216-089-91 RES-CHIP 47K 5% 1/10W
R123 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R124 1-216-041-00 METAL CHIP 470 5% 1/10W
R130 1-216-077-91 RES-CHIP 15K 5% 1/10W
R132 1-216-041-00 METAL CHIP 470 5% 1/10W
R133 1-216-089-91 RES-CHIP 47K 5% 1/10W
R142 1-216-051-00 METAL CHIP 1.2K 5% 1/10W
R143 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R160 1-216-295-91 SHORT 0
(SE100A1/A2,SE200V1/V2,SE250D/P,SE300D1/D2,SX250D)
R160 1-216-071-00 METAL CHIP 8.2K 5% 1/10W
(SE100K,SE400K,SE450K,SX100K)
R160 1-216-067-00 METAL CHIP 5.6K 5% 1/10W
(SE250B,SE450B)
R169 1-216-113-00 METAL CHIP 470K 5% 1/10W
R170 1-216-061-00 METAL CHIP 3.3K 5% 1/10W
R171 1-216-073-00 METAL CHIP 10K 5% 1/10W
R176 1-216-037-00 METAL CHIP 330 5% 1/10W
R177 1-216-041-00 METAL CHIP 470 5% 1/10W
R178 1-216-041-00 METAL CHIP 470 5% 1/10W
R179 1-216-041-00 METAL CHIP 470 5% 1/10W
R180 1-216-069-00 METAL CHIP 6.8K 5% 1/10W
R181 1-216-061-00 METAL CHIP 3.3K 5% 1/10W
R182 1-216-041-00 METAL CHIP 470 5% 1/10W
R183 1-216-041-00 METAL CHIP 470 5% 1/10W
R184 1-216-295-91 SHORT 0
R185 1-216-295-91 SHORT 0
R189 1-216-049-91 RES-CHIP 1K 5% 1/10W
R196 1-216-061-00 METAL CHIP 3.3K 5% 1/10W
R200 1-216-073-00 METAL CHIP 10K 5% 1/10W
R203 1-216-055-00 METAL CHIP 1.8K 5% 1/10W
R204 1-216-037-00 METAL CHIP 330 5% 1/10W
R205 1-216-037-00 METAL CHIP 330 5% 1/10W
R206 1-216-047-91 RES-CHIP 820 5% 1/10W
(SE100,SE200,SE250,SE300,SX100K,SX250D)
R206 1-216-045-00 METAL CHIP 680 5% 1/10W
(SE400K,SE450)
R207 1-216-047-91 RES-CHIP 820 5% 1/10W
(SE100,SE200,SE250,SE300,SX100K,SX250D)
R207 1-216-059-00 METAL CHIP 2.7K 5% 1/10W
(SE400K,SE450)
R208 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R209 1-216-055-00 METAL CHIP 1.8K 5% 1/10W
R210 1-216-043-91 RES-CHIP 560 5% 1/10W
R211 1-216-071-00 METAL CHIP 8.2K 5% 1/10W
R212 1-216-051-00 METAL CHIP 1.2K 5% 1/10W
R213 1-216-041-00 METAL CHIP 470 5% 1/10W
R214 1-216-041-00 METAL CHIP 470 5% 1/10W
7-12
Page 75
MA-372
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
R215 1-216-025-91 RES-CHIP 100 5% 1/10W
R216 1-216-117-00 METAL CHIP 680K 5% 1/10W
(SE100,SE200,SE250,SE300,SX100K,SX250D)
R216 1-216-109-00 METAL CHIP 330K 5% 1/10W
(SE400K,SE450)
R217 1-216-025-91 RES-CHIP 100 5% 1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
R218 1-216-295-91 SHORT 0
R219 1-216-017-91 RES-CHIP 47 5% 1/10W
R220 1-216-049-91 RES-CHIP 1K 5% 1/10W
R221 1-216-017-91 RES-CHIP 47 5% 1/10W
R222 1-216-017-91 RES-CHIP 47 5% 1/10W
(SE300)
R223 1-216-017-91 RES-CHIP 47 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R224 1-216-057-00 METAL CHIP 2.2K 5% 1/10W
R225 1-216-057-00 METAL CHIP 2.2K 5% 1/10W
R226 1-216-055-00 METAL CHIP 1.8K 5% 1/10W
R227 1-216-295-91 SHORT 0
R228 1-216-295-91 SHORT 0 (SE250B,SE450B)
R232 1-216-077-91 RES-CHIP 15K 5% 1/10W
(SE100,SE200,SE250,SE300,SX100K,SX250D)
R232 1-216-085-00 METAL CHIP 33K 5% 1/10W
(SE400K,SE450)
R233 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
(SE250B,SE450B)
R235 1-216-089-91 RES-CHIP 47K 5% 1/10W
R236 1-216-089-91 RES-CHIP 47K 5% 1/10W
R270 1-216-043-91 RES-CHIP 560 5% 1/10W
(SE400K,SE450)
R271 1-216-043-91 RES-CHIP 560 5% 1/10W
R272 1-216-051-00 METAL CHIP 1.2K 5% 1/10W
(SE100,SE200V1/V2,SE250B,SX100K)
R272 1-216-059-00 METAL CHIP 2.7K 5% 1/10W
(SE400K,SE450)
R272 1-216-055-00 METAL CHIP 1.8K 5% 1/10W
(SE200G/I,SE250D/P,SE300,SX250D)
R273 1-216-295-91 SHORT 0
R274 1-216-067-00 METAL CHIP 5.6K 5% 1/10W
(SE100,SE200,SE250,SE300,SX100K,SX250D)
R274 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
(SE400K,SE450)
R276 1-216-077-91 RES-CHIP 15K 5% 1/10W
(SE100,SE200,SE250,SE300,SX100K,SX250D)
R276 1-216-071-00 METAL CHIP 8.2K 5% 1/10W
(SE400K,SE450)
R277 1-216-081-00 METAL CHIP 22K 5% 1/10W
R278 1-216-081-00 METAL CHIP 22K 5% 1/10W
R279 1-216-081-00 METAL CHIP 22K 5% 1/10W
R280 1-216-097-91 RES-CHIP 100K 5% 1/10W
R283 1-216-295-91 SHORT 0
R284 1-216-295-91 SHORT 0
R286 1-216-025-91 RES-CHIP 100 5% 1/10W
R350 1-216-093-91 RES-CHIP 68K 5% 1/10W
R351 1-216-067-00 METAL CHIP 5.6K 5% 1/10W
R352 1-216-093-91 RES-CHIP 68K 5% 1/10W
(SE300)
R358 1-216-055-00 METAL CHIP 1.8K 5% 1/10W
R359 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R362 1-216-051-00 METAL CHIP 1.2K 5% 1/10W
R363 1-216-079-00 METAL CHIP 18K 5% 1/10W
R364 1-216-035-00 METAL CHIP 270 5% 1/10W
R365 1-216-109-00 METAL CHIP 330K 5% 1/10W
R366 1-216-073-00 METAL CHIP 10K 5% 1/10W
R367 1-216-069-00 METAL CHIP 6.8K 5% 1/10W
R368 1-216-047-91 RES-CHIP 820 5% 1/10W
R370 1-216-075-00 METAL CHIP 12K 5% 1/10W
R371 1-216-079-00 METAL CHIP 18K 5% 1/10W
R380 1-216-017-91 RES-CHIP 47 5% 1/10W
R381 1-216-063-91 RES-CHIP 3.9K 5% 1/10W
R382 1-217-671-11 METAL CHIP 1 5% 1/10W
R383 1-216-031-00 METAL CHIP 180 5% 1/10W
R420 1-216-295-91 SHORT 0
R421 1-216-295-91 SHORT 0
R422 1-216-049-91 RES-CHIP 1K 5% 1/10W
R423 1-216-295-91 SHORT 0
R424 1-216-295-91 SHORT 0 (SE300,SE450B/D/P)
R425 1-216-295-91 SHORT 0 (SE300,SE450B/D/P)
R426 1-216-041-00 METAL CHIP 470 5% 1/10W
(SE300)
R427 1-216-017-91 RES-CHIP 47 5% 1/10W
R460 1-216-073-00 METAL CHIP 10K 5% 1/10W
R461 1-216-037-00 METAL CHIP 330 5% 1/10W
R462 1-216-049-91 RES-CHIP 1K 5% 1/10W
R463 1-216-053-00 METAL CHIP 1.5K 5% 1/10W
R464 1-216-057-00 METAL CHIP 2.2K 5% 1/10W
R465 1-216-061-00 METAL CHIP 3.3K 5% 1/10W
R466 1-216-295-91 SHORT 0
R467 1-216-295-91 SHORT 0
R468 1-216-083-00 METAL CHIP 27K 5% 1/10W
R469 1-216-089-91 RES-CHIP 47K 5% 1/10W
(SE100K,SE200,SE250,SE300,SE400K,SE450,SX100K,SX250D)
R470 1-216-073-00 METAL CHIP 10K 5% 1/10W
R471 1-216-037-00 METAL CHIP 330 5% 1/10W
R472 1-216-049-91 RES-CHIP 1K 5% 1/10W
R473 1-216-295-91 SHORT 0
R474 1-216-063-91 RES-CHIP 3.9K 5% 1/10W
R475 1-216-059-00 METAL CHIP 2.7K 5% 1/10W
R476 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R477 1-216-069-00 METAL CHIP 6.8K 5% 1/10W
R478 1-216-077-91 RES-CHIP 15K 5% 1/10W
R479 1-216-089-91 RES-CHIP 47K 5% 1/10W
(SE300)
R500 1-216-041-00 METAL CHIP 470 5% 1/10W
R501 1-216-041-00 METAL CHIP 470 5% 1/10W
R502 1-216-041-00 METAL CHIP 470 5% 1/10W
R510 1-249-407-11 CARBON 150 5% 1/4W F
(SE100,SE200G/V1/V2,SE300G,SE400K,SE450K,SX100K)
R510 1-249-408-11 CARBON 180 5% 1/4W F
(SE250,SE200I,SE300D1/D2,SE450B/D/P,SX250D)
R511 1-249-407-11 CARBON 150 5% 1/4W F
R512 1-216-022-00 METAL CHIP 75 5% 1/10W
R353 1-216-067-00 METAL CHIP 5.6K 5% 1/10W
(SE300)
R354 1-216-129-00 METAL CHIP 2.2M 5% 1/10W
R355 1-216-093-91 RES-CHIP 68K 5% 1/10W
R356 1-216-067-00 METAL CHIP 5.6K 5% 1/10W
R357 1-216-071-00 METAL CHIP 8.2K 5% 1/10W
R514 1-216-037-00 METAL CHIP 330 5% 1/10W
R515 1-216-049-91 RES-CHIP 1K 5% 1/10W
R516 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R517 1-216-022-00 METAL CHIP 75 5% 1/10W
R541 1-216-025-91 RES-CHIP 100 5% 1/10W
(SE250,SE200I,SE300D1/D2,SE450B/D/P,SX250D)
7-13
Page 76
MA-372
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
R542 1-249-408-11 CARBON 180 5% 1/4W F
(SE250,SE200I,SE300D1/D2,SE450B/D/P,SX250D)
R543 1-249-407-11 CARBON 150 5% 1/4W F
(SE250,SE200I,SE300D1/D2,SE450B/D/P,SX250D)
R545 1-216-085-00 METAL CHIP 33K 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R546 1-216-089-91 RES-CHIP 47K 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R547 1-216-049-91 RES-CHIP 1K 5% 1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
R548 1-216-022-00 METAL CHIP 75 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R549 1-216-022-00 METAL CHIP 75 5% 1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
R570 1-216-041-00 METAL CHIP 470 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R571 1-216-041-00 METAL CHIP 470 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R572 1-216-041-00 METAL CHIP 470 5% 1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
R574 1-216-097-91 RES-CHIP 100K 5% 1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
R580 1-216-049-91 RES-CHIP 1K 5% 1/10W
R581 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R582 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R583 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
R618 1-216-055-00 METAL CHIP 1.8K 5% 1/10W
R622 1-260-297-11 CARBON 2.7 5% 1/2W
R623 1-260-073-11 CARBON 5.6 5% 1/2W
R624 1-216-073-00 METAL CHIP 10K 5% 1/10W
R625 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R626 1-216-049-91 RES-CHIP 1K 5% 1/10W
R660 1-216-049-91 RES-CHIP 1K 5% 1/10W
R661 1-216-121-91 RES-CHIP 1M 5% 1/10W
R662 1-216-041-00 METAL CHIP 470 5% 1/10W
R663 1-216-053-00 METAL CHIP 1.5K 5% 1/10W
R664 1-216-295-91 SHORT 0
R666 1-216-295-91 SHORT 0
R667 1-216-037-00 METAL CHIP 330 5% 1/10W
R668 1-216-025-91 RES-CHIP 100 5% 1/10W
R669 1-216-025-91 RES-CHIP 100 5% 1/10W
R670 1-216-041-00 METAL CHIP 470 5% 1/10W
R671 1-216-295-91 SHORT 0
R672 1-216-049-91 RES-CHIP 1K 5% 1/10W
(SE100K,SE250B,SE400K,SE450B/K,SX100K)
R673 1-216-073-00 METAL CHIP 10K 5% 1/10W
R702 1-216-295-91 SHORT 0
R704 1-216-041-00 METAL CHIP 470 5% 1/10W
R705 1-216-041-00 METAL CHIP 470 5% 1/10W
R711 1-212-895-00 FUSIBLE 390 5% 1/4W
R713 1-216-025-91 RES-CHIP 100 5% 1/10W
R714 1-216-113-00 METAL CHIP 470K 5% 1/10W
R584 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R585 1-216-097-91 RES-CHIP 100K 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R586 1-216-097-91 RES-CHIP 100K 5% 1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
R587 1-216-097-91 RES-CHIP 100K 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R590 1-216-049-91 RES-CHIP 1K 5% 1/10W
R593 1-216-097-91 RES-CHIP 100K 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R594 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R595 1-216-057-00 METAL CHIP 2.2K 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R596 1-216-077-91 RES-CHIP 15K 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R600 1-249-417-11 CARBON 1K 5% 1/4W F
R601 1-249-417-11 CARBON 1K 5% 1/4W F
R602 1-216-089-91 RES-CHIP 47K 5% 1/10W
R603 1-216-452-11 METAL OXIDE 180 5% 2W
R604 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R605 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R606 1-216-069-00 METAL CHIP 6.8K 5% 1/10W
R607 1-216-053-00 METAL CHIP 1.5K 5% 1/10W
R608 1-249-414-11 CARBON 560 5% 1/4W F
R609 1-247-815-91 CARBON 220 5% 1/4W
R610 1-247-815-91 CARBON 220 5% 1/4W
R611 1-216-049-91 RES-CHIP 1K 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R613 1-215-907-11 METAL OXIDE 22 5% 3W
R614 1-215-857-11 METAL OXIDE 10 5% 1W
R615 1-216-047-91 RES-CHIP 820 5% 1/10W
(SE250,SE300,SE450B/D/P,SX250D)
R617 1-216-049-91 RES-CHIP 1K 5% 1/10W
R723 1-216-097-91 RES-CHIP 100K 5% 1/10W
R724 1-216-061-00 METAL CHIP 3.3K 5% 1/10W
R725 1-216-081-00 METAL CHIP 22K 5% 1/10W
R726 1-216-097-91 RES-CHIP 100K 5% 1/10W
R731 1-216-041-00 METAL CHIP 470 5% 1/10W
(SE100A1/A2,SE200I/V1/V2,SE250,
SE300D1/D2,SE450B/D/P,SX250D)
R733 1-216-041-00 METAL CHIP 470 5% 1/10W
(SE100,SE200I/V1/V2,SE250,SE300D1/D2,
SE400K,SE450,SX100K,SX250D)
R754 1-216-025-91 RES-CHIP 100 5% 1/10W
R755 1-216-025-91 RES-CHIP 100 5% 1/10W
R756 1-216-073-00 METAL CHIP 10K 5% 1/10W
R757 1-216-049-91 RES-CHIP 1K 5% 1/10W
R800 1-216-101-00 METAL CHIP 150K 5% 1/10W
(SE200,SE250,SE300,SE450,SX250D)
R801 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE200,SE250,SE300,SE450,SX250D)
R802 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE200,SE250,SE300,SE450,SX250D)
R803 1-216-081-00 METAL CHIP 22K 5% 1/10W
(SE200,SE250,SE300,SE450,SX250D)
R804 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE200,SE250,SE300,SE450,SX250D)
R805 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE200,SE250,SE300,SE450,SX250D)
R806 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE200,SE250,SE300,SE450,SX250D)
R807 1-216-085-00 METAL CHIP 33K 5% 1/10W
(SE200,SE250,SE300,SE450,SX250D)
R813 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE200,SE250,SE300,SE450,SX250D)
R850 1-216-025-91 RES-CHIP 100 5% 1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
7-14
Page 77
MA-372
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
R851 1-216-077-91 RES-CHIP 15K 5% 1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
R852 1-216-081-00 METAL CHIP 22K 5% 1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
R853 1-216-049-91 RES-CHIP 1K 5% 1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
R856 1-216-097-91 RES-CHIP 100K 5% 1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
R857 1-216-069-00 METAL CHIP 6.8K 5% 1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
R858 1-216-069-00 METAL CHIP 6.8K 5% 1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
R859 1-216-123-11 METAL CHIP 1.2M 5% 1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
R860 1-216-123-11 METAL CHIP 1.2M 5% 1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
R861 1-216-117-00 METAL CHIP 680K 5% 1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
R862 1-216-057-00 METAL CHIP 2.2K 5% 1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
R968 1-216-101-00 METAL CHIP 150K 5% 1/10W
(SE250B,SE450B)
R969 1-216-069-00 METAL CHIP 6.8K 5% 1/10W
(SE250B,SE450B)
R970 1-216-085-00 METAL CHIP 33K 5% 1/10W
(SE250B,SE450B)
R971 1-216-085-00 METAL CHIP 33K 5% 1/10W
(SE250B,SE450B)
R972 1-216-083-00 METAL CHIP 27K 5% 1/10W
(SE250B,SE450B)
R990 1-216-295-91 SHORT 0 (SE250B,SE450B)
R993 1-216-071-00 METAL CHIP 8.2K 5% 1/10W
(SE250B,SE450B)
R994 1-216-689-11 METAL CHIP 39K 0.5% 1/10W
(SE250B,SE450B)
R995 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE250B,SE450B)
R996 1-216-689-11 METAL CHIP 39K 0.5% 1/10W
(SE250B,SE450B)
R997 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE250B,SE450B)
R998 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE250B,SE450B)
R999 1-216-295-91 SHORT 0 (SE250B,SE450B)
< SWITCH >
S100 1-771-155-11 SWITCH, ROTARY
S101 1-571-958-11 SWITCH, PUSH (1 KEY)
S460 1-771-410-21 SWITCH, TACT
(SE100,SE200,SE250,SE400K,SE450,SX100K,SX250D)
S461 1-771-410-21 SWITCH, TACT
(SE100,SE200,SE250,SE400K,SE450,SX100K,SX250D)
S462 1-771-410-21 SWITCH, TACT
S463 1-771-410-21 SWITCH, TACT
S464 1-771-410-21 SWITCH, TACT
S467 1-571-588-11 SWITCH, SLIDE
(SE100K,SE200,SE250,SE300,SE400K,SE450,SX100K,SX250D)
S470 1-771-410-21 SWITCH, TACT
S471 1-771-410-21 SWITCH, TACT
R973 1-216-105-91 RES-CHIP 220K 5% 1/10W
(SE250B,SE450B)
R974 1-216-081-00 METAL CHIP 22K 5% 1/10W
(SE250B,SE450B)
R975 1-216-295-91 SHORT 0
(SE250B,SE450B)
R976 1-216-059-00 METAL CHIP 2.7K 5% 1/10W
(SE250B,SE450B)
R977 1-216-089-91 RES-CHIP 47K 5% 1/10W
(SE250B,SE450B)
R978 1-216-071-00 METAL CHIP 8.2K 5% 1/10W
(SE250B,SE450B)
R979 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE250B,SE450B)
R980 1-216-097-91 RES-CHIP 100K 5% 1/10W
(SE250B,SE450B)
R981 1-216-083-00 METAL CHIP 27K 5% 1/10W
(SE250B,SE450B)
R982 1-216-089-91 RES-CHIP 47K 5% 1/10W
(SE250B,SE450B)
R983 1-216-067-00 METAL CHIP 5.6K 5% 1/10W
(SE250B,SE450B)
R985 1-216-041-00 METAL CHIP 470 5% 1/10W
(SE250B,SE450B)
R986 1-216-089-91 RES-CHIP 47K 5% 1/10W
(SE250B,SE450B)
R988 1-216-073-00 METAL CHIP 10K 5% 1/10W
(SE250B,SE450B)
R989 1-216-049-91 RES-CHIP 1K 5% 1/10W
(SE250B,SE450B)
S473 1-771-410-21 SWITCH, TACT
S474 1-771-410-21 SWITCH, TACT
S476 1-771-410-21 SWITCH, TACT
S477 1-771-410-21 SWITCH, TACT
S478 1-771-410-21 SWITCH, TACT (SE300)
< TRANSFORMER >
T380 1-433-479-11 TRANSFORMER, BIAS OSCILLATION
< TUNER >
TU700 1-693-435-41 TUNER, IF (BTF-3MC445) (SE250B,SE450B)
TU700 1-693-433-51 TUNER, IF (BTF-3MC404)
(SE200V1/V2/I,SE250D/P,SE30OD1/D2,SE450D/P,SX250D)
TU700 1-693-432-11 TUNER, IF (BTF-2MU601) (SE200G,SE300G)
TU701 1-693-480-11 TUNER, IF (BTF-2MC422)
(SE100A1/A2/K,SE200V1/V2,SE400K,SE450K,SX100K)
< VIBRATOR >
X160 1-579-463-11 VIBRATOR, CRYSTAL (32.768kHz)
X161 1-781-717-21 VIBRATOR, CRYSTAL (17.734MHz)
X200 1-579-608-21 VIBRATOR, CRYSTAL (4.433MHz)
************************************************************
7-15
Page 78
POWER BLOCK
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
0 1-468-459-11 POWER BLOCK
************
(Ref.No.:1,000 Series)
< CAPACITOR >
0C001 9-885-001-95 PLASTIC FILM CAPACITOR 0.047uF 250V
0C002 9-885-001-96 PLASTIC FILM CAPACITOR 0.1uF 250V
C003 9-885-001-97 ELECTROLYTIC CAPACITOR 47uF 400V
0C004 9-885-001-98 CERAMIC CAPACITOR 3300pF 250V
0C005 9-885-001-98 CERAMIC CAPACITOR 3300pF 250V
0C006 9-885-001-99 CERAMIC CAPACITOR 470pF 250V
0C007 9-885-001-99 CERAMIC CAPACITOR 470pF 250V
C102 1-126-964-91 ELECTROLYTIC CAPACITOR 10uF 50V
C103 9-885-002-00 CERAMIC CAPACITOR 470pF 50V
C104 9-885-002-01 PLASTIC FILM CAPACITOR 1.5nF 5% 50V
C105 9-885-002-02 PLASTIC FILM CAPACITOR 220nF 63V
C106 9-885-002-03 PLASTIC FILM CAPACITOR 100nH 83V
C107 1-128-965-91 ELECTROLYTIC CAPACITOR 22uF 50V
C201 1-126-968-91 ELECTROLYTIC CAPACITOR 100uF 50V
C301 9-880-907-01 ELECTROLYTIC CAPACITOR 820uF 25V
C302 1-126-968-91 ELECTROLYTIC CAPACITOR 100uF 50V
C303 9-885-002-04 PLASTIC FILM CAPACITOR 10nF 83V
C401 9-880-908-01 ELECTROLYTIC CAPACITOR 820uF 16V
C402 1-126-925-91 ELECTROLYTIC CAPACITOR 470uF 10V
C403 9-885-002-04 PLASTIC FILM CAPACITOR 10nF 83V
C501 1-126-960-91 ELECTROLYTIC CAPACITOR 1uF 50V
C601 9-880-909-01 ELECTROLYTIC CAPACITOR 330uF 25V
< CONNECTOR >
CN001 1-580-230-11 CONNECTOR 2 P
CN101 1-784-642-11 CONNECTOR 11 P
< DIODE >
0L001 9-885-002-10 LINE FILTER 60uH 3.0A
0L002 9-885-002-11 LINE FILTER 26mH 0.4A
L101 9-885-002-12 FERRITE BEAD INDUCTOR
L201 9-885-002-12 FERRITE BEAD INDUCTOR
L301 9-885-002-13 CHOKE 3.3uH 2.2A
L302 9-885-002-12 FERRITE BEAD INDUCTOR
L401 9-885-001-13 CHOKE 3.3uH 2.2A
0PC101 9-880-921-01 OPTOISOLATOR
0Q101 9-880-922-01 POWER FET
Q102 9-885-002-14 TRANSISTOR
0R001 9-885-002-15 CARBON FILM RESISTOR 2M 0.5W
R101 1-247-882-91 CARBON FILM RESISTOR 130K 0.25W
R102 1-247-882-91 CARBON FILM RESISTOR 130K 0.25W
R103 1-247-882-91 CARBON FILM RESISTOR 130K 0.25W
R104 1-247-882-91 CARBON FILM RESISTOR 130K 0.25W
R105 9-885-002-16 METAL FILM RESISTOR 4.7 0.5W
R107 9-885-002-17 METAL FILM RESISTOR 0.75 0.5W
R110 1-214-761-11 METAL FILM RESISTOR 22K 1% 0.25W
R111 1-247-855-91 CARBON FILM RESISTOR 10K 0.25W
R112 1-247-831-91 CARBON FILM RESISTOR 1K 0.25W
R113 1-247-807-91 CARBON FILM RESISTOR 100 0.25W
R201 1-247-879-91 CARBON FILM RESISTOR 100 0.25W
R218 1-247-839-91 CARBON FILM RESISTOR 2.2K 0.25W
R301 1-247-829-91 CARBON FILM RESISTOR 820 0.25W
R501 1-214-729-11 METAL FILM RESISTOR 1K 1% 0.25W
< COIL >
< ISOLATOR >
< TRANSISTOR >
< RESISTOR >
D001 9-885-002-05 DIODE
D002 9-885-002-05 DIODE
D003 9-885-002-05 DIODE
D004 9-885-002-05 DIODE
D101 9-885-002-06 DIODE
D102 9-885-002-07 DIODE
D103 9-885-002-05 DIODE
D104 9-885-002-06 DIODE
D201 9-885-002-05 DIODE
D301 9-880-915-01 DIODE
D401 9-885-002-08 DIODE
D601 9-885-002-07 DIODE
< FUSE >
0F001 9-884-454-01 FUSE 2A/250V
< IC >
IC101 9-885-002-09 IC uC3844A
IC501 9-880-920-01 IC KA431AETA
R502 9-885-002-18 METAL FILM RESISTOR 1.4K 1% 0.25W
R503 1-247-799-91 CARBON FILM RESISTOR 47 0.25W
R504 1-247-851-91 CARBON FILM RESISTOR 6.8K 0.25W
R505 1-247-837-91 CARBON FILM RESISTOR 1.8K 0.25W
R601 1-247-879-91 CARBON FILM RESISTOR 100K 0.25W
< TRANSFORMER >
0T101 9-885-002-19 SWITCHING TRANSFORMER
< VARISTOR >
0Z001 9-880-923-01 METALOXID-VARISTOR 750V D=10
< ZENER DIODE >
ZD101 9-880-924-01 ZENER DIODE 0.4W 5.1V
ZD102 9-885-002-20 ZENER DIODE 0.4W 27V
ZD103 9-880-926-01 VOLTAGE SUPRESSOR 600W 350V
************************************************************
7-16
Note : The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
Page 79
Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks
MISCELLANEOUS
*************
019 1-777-854-21 CORD, POWER
53 1-792-019-11 CABLE, FLAT (FFM-36)
54 1-792-018-11 CABLE, FLAT (FAC-8)
056 1-468-459-11 POWER BLOCK
704 1-500-144-11 HEAD, FE
832 1-766-723-21 CONNECTOR, BOARD TO BOARD 3P
M901 1-774-359-11 DRUM ASSY, DZH-78E-R
(SE100V1/V2/K,SE200V1/V2,SE250B,SX100K)
M901 1-774-361-11 DRUM ASSY, DZH-92D-R
(SE200G/I,SE250D/P,SE300D1/D2/G,SX250D)
M901 1-774-362-11 DRUM ASSY, DZH-93D-R
(SE400K,SE450B/D/K/P)
M902 1-698-971-11 MOTOR, DC (CAPSTAN)
M903 1-541-309-11 MOTOR, L (RF-370C) (LOADING)
************************************************************
ACCESSORIES & PACKING MATERIALS
*******************************
1-418-008-11 COMMANDER, STANDARD (RMT-V257)
(SE100A1/A2/K,SE200V1/V2,SX100K)
1-418-008-21 COMMANDER, STANDARD(RMT-V257A)
(SE250B)
1-418-008-31 COMMANDER, STANDARD(RMT-V257B)
(SE200G/I/D/P,SE450D/P/K,SX250D)
1-418-008-41 COMMANDER, STANDARD(RMT-V257C)
(SE450B)
1-418-781-11 COMMANDER, STANDARD (RMT-V287)
(SE300D1/D2/G)
************************************************************
#1 7-685-648-79 SCREW +BVTP 3X12 TYPE2
#701 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
#702 7-682-147-01 SCREW +P 3X6
#703 7-685-133-19 SCREW (DIA. 2.6) (IT3B)
3-868-344-31 MANUAL, INSTRUCTION (POLISH)
(SE100K,SE400K,SE450K,SX100K)
3-868-344-41 MANUAL, INSTRUCTION (HUNGARIAN)
(SE100K,SE400K,SE450K,SX100K)
3-868-344-51 MANUAL, INSTRUCTION (RUSSIAN)
(SE100K,SE400K)
3-868-345-11 MANUAL, INSTRUCTION (ENGLISH)
(SE200G/I,SE300G)
3-868-346-11 MANUAL, INSTRUCTION (FRENCH)
(SE250B,SE450B)
**************
HARDWARE LIST
**************
0 1-770-019-11 ADAPTOR, CONVERSION PLUG 3P
1-696-593-11 CORD, CONNECTION (PAL)
(SE200G/I,SE300G)
3-709-433-01 COVER, REMOTE CONTROL BATTERY
(FOR RMT-V257,V257A,V257B,V257C,V287)
3-868-342-11 MANUAL, INSTRUCTION (FRENCH)
(SE100A1,SE100V1,SE200D,SE300D1,SE450D)
3-868-342-21 MANUAL, INSTRUCTION (SPANISH)
(SE100A2,SE250P,SE300D2,SE450P,SX250D)
3-868-342-31 MANUAL, INSTRUCTION (GERMAN)
(SE100A1,SE200V1,SE250D,SE300D1,SE450D,SX250D)
3-868-342-41 MANUAL, INSTRUCTION (ITALIAN)
(SE100A,SE200V1,SE250D,SE300D1,SE450D/P)
3-868-342-51 MANUAL, INSTRUCTION (DUTCH)
(SE100A1,SE200V1,SE300D1,SE450D)
3-868-342-61 MANUAL, INSTRUCTION (PORTUGUESE)
(SE100A1,SE300D2,SE450D)
3-868-342-71 MANUAL, INSTRUCTION (GREEK)
(SE100A1,SE200V2,SE450P)
3-868-343-11 MANUAL, INSTRUCTION (SWEDISH)
(SE100A1,SE200V2,SE300D2,SX250D)
3-868-343-21 MANUAL, INSTRUCTION (DANISH)
(SE100A2,SE200V2,SE300D2,SX250D)
3-868-343-31 MANUAL, INSTRUCTION (FINNISH)
(SE100A2,SE200V2,SE300D2,SX250D)
3-868-344-11 MANUAL, INSTRUCTION (ENGLISH)
(SE100K,SE400K,SE450K,SX100K)
3-868-344-21 MANUAL, INSTRUCTION (CZECH)
(SE100K,SE400K,SE450K,SX100K)
7-17
Note : The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
Page 80
MEMO
7-18E
Page 81
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
9-921-750-11
Sony Corporation
Home Video Division Company
— 104 —
Printed in Hungary ©2000.2
2000B167561-1
Published by Quality Assurance Dept.
Loading...