Sony SLV-ED10ME, SLV-ED10MPS, SLV-ED10PS Service Manual
SLV-ED10ME/ED10MPS/ED10PS/ED10SG/ED40ME/ED40PS/ED40SG/ED60ME/
ED60PS/ED60SG/ED70MN/EZ10AZ/EZ40AZ/EZ60AZ/EZ70AS/EZ70NZ
RMT-V245/V245A/V245C/V247/V247C/V247D/V248C
SERVICE MANUAL
Photo: SLV-ED70MN
• Refer to the SERVICE MANUAL of VHS MECHANICAL
ADJUSTMENTS VI for MECHANICAL ADJUSTMENTS.
(9-921-647-11)
* The abbreviations of ED10, ED40, ED60, ED70, EZ10, EZ40, EZ60 and EZ70
contained in this service manual are indicated when these models are common to all their corresponding models as given below.
Abbreviated
model name
All model
names
SLV-
ED10
ED10ME
ED10MPS
ED10PS
ED10SG
ED40 ED60
ED40ME
ED40PS
ED40SG
ED60ME
ED60PS
ED60SG
ED70
ED70MN
EZ10
EZ10AZ
EZ40
EZ40AZ
Australian Model
SLV-EZ10AZ/EZ40AZ/EZ60AZ/EZ70AS
E Model
SLV-ED10MPS/ED10PS/ED40PS/ED60PS/ED70MN
ME Model
SLV-ED10ME/ED10SG/ED40ME/
ED40SG/ED60ME/ED60SG
Newzealand Model
SLV-EZ10AZ/EZ40AZ/EZ60AZ/EZ70NZ
S MECHANISM
G
EZ60 EZ70
ED60AZ
EZ70AS
EZ70NZ
MICROFILM
VIDEO CASSETTE RECORDER
SPECIFICATIONS
System
Color system
ED10/ED40/ED60/ED70:
PAL, MESECAM, NTSC 3.58,
NTSC 4.43
EZ10/EZ40/EZ60/EZ70:
PAL, NTSC 4.43
TV system
ED10/ED40/ED60/ED70:
B/G, D/K, I
EZ10/EZ40/EZ60/EZ70:
B/G
Channel coverage
ED10/ED40/ED60/ED70:
B/G: VHF E2 to E12/UHF E21 to E69/
CATV S01 to S05, S1 to S41
D/K: VHF R1 to R12, UHF R21 to R69
I: VHF SA4 to SA13/UHF B21 to B69/
CATV S01 to S05, S1 to S41
EZ10/EZ40/EZ60 (COUNTRY is set to AUS),
EZ70AS:
VHF AS0 to AS12, AS5A, AS9A
UHF AS28 to AS69
CATV S01 to S05, S1 to S41
EZ10/EZ40/EZ60 (COUNTRY is set to NZ),
EZ70NZ:
VHF NZ1 to NZ11
UHF E21 to E69
CATV S01 to S05, S1 to S41
RF output signal
ED10/ED40/ED60/ED70/EZ70NZ:
UHF channels 21 to 69
EZ10/EZ40/EZ60/EZ70AS:
UHF channels 28 to 69
Aerial out
75-ohm asymmetrical aerial socket
Inputs and outputs
LINE IN (ED10/EZ10/EZ40/EZ60)
LINE-1 IN (ED40/ED60/ED70/EZ70)
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN (MONO), phono jack (1)
(ED10/ED40/EZ10/EZ40)
AUDIO IN, phono jack (2) (ED60/ED70/
EZ60/EZ70)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE-2 IN (ED40/ED60/ED70/EZ70)
VIDEO IN, phono jack (1)
Input signal: 1Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN (MONO), phono jack (2)
(ED40)
AUDIO IN, phono jack (2) (ED60/ED70/
EZ70)
Input level: 327mVrms
Input impedane: more than 47 kilohms
LINE-3 IN (SAT IN) (ED40/ED60/ED70/
EZ70AS)
VIDEO IN, phono jack (1)
Input signal: 1Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN (MONO), phono jack (2) (ED40)
AUDIO IN, phono jack (2) (ED60/ED70/
EZ70AS)
Input level: 327mVrms
Input impedane: more than 47 kilohms
LINE OUT (ED10/ED40/EZ10/EZ40)
LINE-1 OUT (ED60/ED70/EZ60/EZ70)
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbal-
anced, sync negative
AUDIO OUT, phono jack (1) (ED10/EZ10/
EZ40)
AUDIO OUT (MONO), phono jack (2)
(ED40)
AUDIO OUT, phono jack (2) (ED60/ED70/
EZ60/EZ70)
Standard output: 327 mVrms
Load impedance; 47 kilohms
Output impedance: less than 10 kilohms
LINE-2 OUT (AUDIO) (ED60/ED70/EZ60/EZ70)
AUDIO OUT, phono jack (2)
Standard output: 327 mVrms
Load impedance; 47 kilohms
Output impedance: less than 10 kilohms
SKY TV DECODER (EZ70NZ)
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced.
General
Power requirements
110 – 240 V AC, 50/60 Hz (ED10/ED40/
ED60/ED70)
220-240 V AC, 50 Hz (EZ10/EZ40/EZ60/
EZ70)
Power consumption
18W (ED10/ED40/ED60/EZ10/EZ40)
20W (ED70/EZ60/EZ70)
Operating temperature
5 ˚C to 40 ˚C
Storage temperature
–20 ˚C to 60 ˚C
Dimensions
Approx. 355 × 96 × 289 mm (w/h/d):
(ED10/EZ10)
Approx. 430 × 100 × 295 mm (w/h/d):
(ED40/ED60/ED70/EZ40/EZ60/EZ70)
including projecting parts and controls
Mass
Approx. 3.6 kg: (ED10/EZ10)
Approx. 4.2 kg: (ED40)
Approx. 4.5 kg: (ED60/ED70/EZ40/EZ60/
EZ70)
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Plug adaptor (1) (ED10ME/ED10SG/ED40ME/
ED40SG/ED60ME/ED60SG)
Design and specifications are subject to change
without notice.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer:
1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder
splashes and bridges.
2. Check the interboard wiring to ensure that no wires are
“pinched” or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them
out to the customer and recommend their replacement.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK ! OR DOTTED
LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS
AND IN THE PARTS LIST ARE CRITICAL TO SAFE
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
4. Look for parts which, though functioning, show obvious signs
of deterioration. Point them out to the customer and recommend their replacement.
5. Check the B+ voltage to see it is at the values specified.
– 2 –
• Feature Difference
SLV- ED10 ED40 ED60 ED70 EZ10 EZ40 EZ60 EZ70 EZ70
FEATURE AS NZ
HEAD/CH 2/2 4/4 4/6 4/6 2/2 4/4 4/6 4/6 4/6
NTSC (3.58) (REC/PB) ggggGGGgg
(4.43) (REC/PB) ggggG/gG/gG/gg g
ME-SECAM (REC/PB) ggggGGGGG
REC (NTSC) (SP/EP) ggggGGGgg
(PAL) (SP/LP) ggggggggg
PLAY (NTSC) (SP/LP/EP) ggggggggg
(PAL) (SP/LP) ggggggggg
RCA REAR LINE INPUT gg
RCA REAR LINE OUTPUT g
ADDITIONAL REAR INPUT (SAT IN) G
ADDITIONAL REAR OUTPUT
(AUDIO OUT)
SKYDECODER REAR IN/OUT GGGGGGGGg
RCA FRONT LINE INPUT G
MODULATOR SYSTEM G/K/I G/K/I G/K/I G/K/I G G G G G
CLICK SHUTTLE GGGgGGGgg
REMOTE COMMANDER RMT- V248C V247 V247C V247D V245A V245A V245C V245 V245
g (3pin g (3pin g (3pin
Y.B.B) Y.W.R) Y.W.R) Y.W.R) Y.W.R) Y.W.R)
g (3pin g (3pin g (3pin
Y.B.B) Y.W.R) Y.W.R) Y.W.R)
GGggGGggg
g (3pin g (3pin g (3pin
Y.B.B) Y.W.R) Y.W.R) Y.W.R) Y.W.R)
g (3pin g (3pin
Y.W.R) Y.W.R) Y.W.R) Y.W.R) Y.W.R)
gg
gg
GGG
GGG
g (3pin g (3pin g (3pin
g (3pin g (3pin g (3pin
g (3pin
g (3pin g (3pin
G
– 3 –
TABLE OF CONTENTS
Section Title Page Section Title Page
Feature Difference................................................................... 3
SERVICE NOTE ...................................................................... 5
1. GENERAL
Getting Started .............................................................. 1-1
Basic Operations ........................................................... 1-4
Additional Operations.................................................... 1-8
Editing............................................................................ 1-11
Additional Information ................................................... 1-12
2. DISASSEMBLY
2-1. Upper Case Removal .................................................... 2-1
2-2. GK-12, NK-11, RJ-82 Board Removal .......................... 2-1
2-3. Rear Panel Removal ..................................................... 2-1
2-4. Front Panel Section Removal ....................................... 2-1
2-5. Power Block Removal ................................................... 2-2
2-6. Mechanism Deck Removal ........................................... 2-2
2-7. MA-350 board Removal ................................................ 2-2
2-8. Internal Views ................................................................ 2-3
2-9. Circuit Boards Location ................................................. 2-4
3. BLOCK DIAGRAMS
3-1. Overall Block Diagram .................................................. 3-1
3-2. Servo/System Control Block Diagram .......................... 3-3
3-3. Video Block Diagram..................................................... 3-5
3-4. Audio Block Diagram..................................................... 3-7
3-5. Tuner Block Diagram ..................................................... 3-9
3-6. Mode Control Block Diagram ........................................ 3-11
3-7. Power Block Diagram.................................................... 3-13
4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1. Frame Schematic Diagram ........................................... 4-3
4-2. Printed Wiring Boards and Schematic Diagrams ......... 4-5
MA-350 Printed Wiring Board ....................................... 4-5
MA-350 (Video, Audio) Schematic Diagram ................. 4-9
MA-350 (System Control) Schematic Diagram ............ 4-13
MA-350 (Servo Control) Schematic Diagram ............... 4-15
MA-350 (Hi-Fi Audio) Schematic Diagram.................... 4-17
MA-350 (I/O) Schematic Diagram................................. 4-19
MA-350 (Tuner) Schematic Diagram ............................ 4-21
MA-350 (FL Drive) Schematic Diagram........................ 4-23
MA-350 (Mode Control) Schematic Diagram ............... 4-25
MA-350 (Power Supply) Schematic Diagram............... 4-27
NK-11 Printed Wiring Board and
Schematic Diagram....................................................... 4-29
GK-12 Printed Wiring Board and
Schematic Diagram....................................................... 4-31
DM-85 Printed Wiring Board and
Schematic Diagrams ..................................................... 4-33
MF-317 Printed Wiring Board and
Schematic Diagram....................................................... 4-35
KK-19 Printed Wiring Board and
Schematic Diagram....................................................... 4-37
DS-85, KK-18 Printed Wiring Boards and
Schematic Diagrams ..................................................... 4-39
RJ-82 Printed Wiring Board and
Schematic Diagram ....................................................... 4-41
HS-921SF/921SF1 Printed Wiring Board ..................... 4-43
HS-921SF/921SF1 Schematic Diagram ....................... 4-45
SR-708/718 Printed Wiring Board ................................ 4-47
SR-708/718 Schematic Diagram .................................. 4-49
5. INTERFACE, IC PIN FUNCTION DESCRIPTION
5-1. System Control-Video Block Interface
(MA-350 BOARD IC161)............................................... 5-1
5-2. System Control-Servo Peripheral Circuit Interface
(MA-350 BOARD IC161)............................................... 5-1
5-3. System Control-Mechanism Block Interface
(MA-350 BOARD IC161)............................................... 5-2
5-4. System Control-Audio Block Interface
(MA-350 BOARD IC161)............................................... 5-3
5-5. Servo/System/Tuner/Timer/MODE Control,
OSD Microprocessor Pin Function
(MA-350 BOARD IC161)............................................... 5-4
5-6. NICAM Processor Pin Function
(NK-11 BOARD IC1)...................................................... 5-5
5-7. ZWEITON Processor Pin Function
(GK-12 BOARD IC001) ................................................. 5-5
6. ERROR CODES ....................................................... 6-1
7. ADJUSTMENTS
7-1. Mechanical Adjustments ............................................... 7-1
7-2. Electrical Adjustments ................................................... 7-1
2-1. Pre-Adjustment Preparations........................................ 7-1
2-1-1. Instruments to be Used............................................ 7-1
2-1-2. Connection ............................................................... 7-1
2-1-3. Set-up of Adjustment................................................ 7-1
2-1-4. Alignment Tapes....................................................... 7-1
2-1-5. Specified I/O Level and Impedance......................... 7-1
2-1-6. Adjusting Sequence ................................................. 7-2
2-2. Power Supply Adjustments ........................................... 7-2
2-2-1. Power Supply Check................................................ 7-2
2-2-2. +6 V Adjustment ....................................................... 7-2
2-3. Servo System Adjustment ............................................. 7-2
2-3-1. RF Switching Position Adjustment........................... 7-2
2-4. Audio System Adjustments ........................................... 7-3
2-4-1. Hi-Fi Audio System Adjustment ............................... 7-3
1. AF Switching Position Adjustment ........................... 7-3
2. Frequency Response Check.................................... 7-3
3. Overall Level Characteristic and
Distortion Factor Check ........................................... 7-4
4. Overall S/N Check.................................................... 7-4
2-4-2. Normal Audio System Adjustment ........................... 7-4
1. ACE Head Adjustment ............................................. 7-4
2. E-E Output Level Check .......................................... 7-4
3. Frequency Responce Check.................................... 7-4
4. Overall Level Characteristic and Distortion
Factor Check ............................................................ 7-5
5. Overall S/N Check.................................................... 7-5
2-5. Tuner System Adjustment ............................................. 7-5
2-5-1. Separation Adjustment............................................. 7-5
2-6. Parts Arrangement Diagram for Adjustments ............... 7-6
8. REPAIR PARTS LIST
8-1. Exploded Views ............................................................. 8-1
8-1-1. Front Panel and Cabinet Assemblies
(ED10/EZ 10 ) ............................................................ 8-1
8-1-2. Chassis Assembly (ED10/EZ10).............................. 8-2
8-1-3. Front Panel and Cabinet Assemblies
(ED40/ED60/ED70/EZ40/EZ60/EZ70) .................... 8-3
8-1-4. Chassis Assembly
(ED40/ED60/ED70/EZ40/EZ60/EZ70) .................... 8-5
8-1-5. Mechanism Chassis Assembly (1)........................... 8-6
8-1-6. Mechanism Chassis Assembly (2)........................... 8-7
8-1-7. Mechanism Chassis Assembly (3)........................... 8-8
8-2. Electrical Parts List........................................................ 8-9
– 4 –
SERVICE NOTE
1. DISASSEMBLY
• This set can be disassembled in the order shown below.
Note: Pages in indicated pages in the SERVICE MANUAL.
Pages in indicated pages in the VHS MECHANICAL ADJUSTMENT MANUAL VI.
Set
Upper case
(Page 2-1)
Front Panel
Section
(Page 2-1)
FL Complete
Ass’y
(Page 13)
Retainer
Plate
(Page 22)
FL Slider
Block Ass’y
(Page 22)
Cam Gear
(Page 23)
Pinch Press
Block Ass’y
(Page 14)
Mechanism
Deck
(Page 2-2)
Rubber
Belt
(Page 15)
Capstan
Motor
(Page 15)
Cam Motor
Retainer
(Page 31)
Ground Shaft
Ass’y
(Page 13)
Drum
Ass’y
(Page 13)
Rubber
Belt
(Page 15)
Pully Gear
Ass’y
(Page 29)
Reel Direct
Ass’y
(Page 30)
RJ-82 Board (EXCEPT
ED10/EZ10/EZ40
(Page 2-1)
Rear
Panel
(Page 2-1)
)
Power
Block
(Page 2-2)
MA-323
Board
(Page 2-2)
Rotary
Switch
(Page 2-2)
GK-12 Board
(EZ70: AS)
(Page 2-1)
Tuner
Unit
NK-11 Board
(ED70/EZ70: NZ
(Page 2-1)
)
Rubber
Belt
(Page 15)
Slider
(Page 26)
Loading
Gear (T, S)
(Page 28)
Cam Motor
(Page 31)
– 5 –
SLV-ED10/ED40/ED60/ED70/EZ10/EZ40/EZ60/EZ70
SECTION 1
GENERAL
This section is extracted from SLV -ED70MN
instruction manual. (3-865-382-11)
1-1
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9
1-10
1-11
1-12 E
1-12
SLV-ED10/ED40/ED60/ED70/EZ10/EZ40/EZ60/EZ70
SECTION 2
DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.
2-1. UPPER CASE REMOVAL 2-3. REAR PANEL REMOVAL
1 Two tapping screws
3 Upper case
2 Two tapping screws
2 Harness
7 Rear panel
6 Two claws
1 Power cord
(CN101)
3 Claw
4 Claw
(EXCEPT
ED10/EZ10)
5 Three claws
2-2. GK-12, NK-11, RJ-82 BOARD REMOVAL
7 RJ-82 board
(EXCEPT ED10/
EZ10/EZ40)
2 NK-11 board
(ED70/EZ70NZ)
GK-12 board
(EZ70AS)
1 Connector
(CN751:
ED70/EZ70)
3 Connector
(CN954: EZ70NZ)
4 Connector
(CN951: ED60/ED70/EZ70AS,
CN952: ED40,
CN953: EZ60/EZ70NZ)
5 Two screws
(BVTP3 × 12)
(ED60/ED70/
EZ60/EZ70)
6 Two screws
(BVTP3 × 12)
(ED40/ED60/
ED70/EZ70)
2-4. FRONT PANEL SECTION REMOVAL
5 Connector
(CN481: ED40/
ED60/ED70/EZ70)
7 Three claws
8 Front panel section
3 Flat cable
(CN451: ED40/ED70/EZ70,
CN454: ED60/EZ40/EZ60)
4 Connector
(CN423)
2 Connector
(CN450)
6 Three claws
1 Flat cable
(CN452: EXCEPT ED10/EZ10,
CN453: ED10/EZ10)
2-1
2-5. POWER BLOCK REMOVAL 2-7. MA-350 BOARD REMOVAL
3 MA-350
board
2 Three screws
(B3)
1 Screw (B3)
(EXCEPT
ED10/EZ10)
2 Power cord
3 Two screws
(B3)
4 Power block
1 Connector
(CN600)
(EXCEPT
ED10/EZ10)
2-6. MECHASISM DECK REMOVAL
5 Connector
4 Connector
(FE head )
7 Two screws
(BVTP3 × 12)
3 Connector
(CN101: EXCEPT
ED10/EZ10)
2 Flexible board
(CN201: ED10/EZ10,
CN260: EXCEPT
ED10/EZ10)
(ACE head )
1 Flat cable
6 Screw
(B3)
(ED10/EZ10)
9 Mechanism
deck
8 Screw
(BVTP3 × 12)
3
Note: When mounting the mechanism deck,
first align ¢ mark on the rotary switch.
2-2
2-8. INTERNAL VIEWS
FE head
1-500-144-11
Q100
Tape top sensor
8-729-043-84
Drum assembly (M901) (DZH-89A-R)
1-759-453-11 (ED10/EZ10)
Drum assembly (M901) (DZH-74E/Z-RP)
8-839-037-04 (ED40/EZ40)
Drum assembly (M901) (DZH-95A/Z-RP)
8-839-045-02 (ED60/ED70/EZ60/EZ70)
ACE head assembly
A-6759-620-A
D102
Tape top/end LED
8-719-048-26
Q101
Tape end sensor
8-729-043-84
Capstan motor
1-698-971-11
Drum assembly (M901) (DZH-89A-R)
1-759-453-11 (ED10/EZ10)
Drum assembly (M901) (DZH-74E/Z-RP)
8-839-037-04 (ED40/EZ40)
Drum assembly (M901) (DZH-95A/Z-RP)
8-839-045-02 (ED60/ED70/EZ60/EZ70)
Cam motor assembly
X-3947-577-1
2-3
2-9. CIRCUIT BOARDS LOCATION
ED10/EZ10
MA-350
VIDEO, AUDIO, I/O,
(
SERVO/SYSTEM CONTROL, TUNER
)
POWER BLOCK
HS-921SF: ED10
(
SR-718: EZ10
(POWER SUPPLY)
)
EXCEPT ED10/EZ10
MA-350
VIDEO, AUDIO, I/O,
(
SERVO/SYSTEM CONTROL, TUNER
NK-11 (ED70/EZ70: NZ)
(NICAM)
GK-12 (EZ70: AS)
(ZVEI TONE)
KK-18
(EASY TIMER)
)
DS-85
(MODE CONTROL)
RJ-82 (EXCEPT EZ40)
(ADDITIONAL REAR IN/OUT)
MF-317
MODE CONTROL,
(
FRONT IN
KK-19
(EASY TIMER)
)
DM-85
(MODE CONTROL)
2-4
2-4 E
POWER BLOCK
HS-921SF1: ED40/ED60/ED70
(
SR-708: EZ40/EZ60/EZ70
(POWER SUPPLY)
)
3-1. OVERALL BLOCK DIAGRAM
SLV-ED10/ED40/ED60/ED70/EZ10/EZ40/EZ60/EZ70
SECTION 3
BLOCK DIAGRAMS
3-1 3-2
SLV-ED10/ED40/ED60/ED70/EZ10/EZ40/EZ60/EZ70
3-2. SERVO/SYSTEM CONTROL BLOCK DIAGRAM
IC161 #• REC/PB
4.4Vp-p(2V)
IC161 #ª REC/PB
4.7Vp-p(2V)
IC161 &º REC/PB
2.1Vp-p(32.768kHz)
IC161 &£ REC/PB
3.5Vp-p(10MHz)
IC161 $º REC/PB
4.9Vp-p(2V)
IC161 @¢ REC/PB
5.3Vp-p(2V)
IC161 #¡ REC
5.6Vp-p(2V)
IC161 #™ REC
5.6Vp-p(2V)
3-3 3-4
3-3. VIDEO BLOCK DIAGRAM
SLV-ED10/ED40/ED60/ED70/EZ10/EZ40/EZ60/EZ70
IC201 %º REC/PB
IC201 *¡ REC/PB
5.2Vp-p(2V)
IC201 &∞ REC/PB
552mVp-p(4.433619MHz)
IC201 &¡ REC/PB
120mVp-p(3.579545MHz)
IC201 ^º REC/PB
REC:352mVp-p(H)
PB:552mVp-p(H)
IC201 %• REC/PB
5.4Vp-p(H)
IC161 $£ REC/PB
1.8Vp-p(H)
IC161 $∞ REC/PB
1.8Vp-p(H)
IC161 %£ REC/PB
3.4Vp-p(17.734475MHz)
IC201 *• REC
1.4Vp-p(2V)
IC201 @¡ REC/PB
REC:360mVp-p(H)
PB:456mVp-p(H)
IC201 @§ REC/PB
REC:528mVp-p(H)
PB:624mVp-p(H)
REC:512mVp-p(H)
PB:608mVp-p(H)
IC201 #º REC
1.1Vp-p(H)
3-5 3-6
SLV-ED10/ED40/ED60/ED70/EZ10/EZ40/EZ60/EZ70
3-4. AUDIO BLOCK DIAGRAM
3-7 3-8
3-5. TUNER BLOCK DIAGRAM
SLV-ED10/ED40/ED60/ED70/EZ10/EZ40/EZ60/EZ70
IC001 !∞ REC/PB
148mVp-p(4MHz)
3-9 3-10
IC001 !§ REC/PB
740mVp-p(24.576MHz)
Loading...