Sony SGPT11 Series Quick start guide

Inserting a SIM Card

Make sure all the cables are unplugged from your tablet device, and then shut down the tablet device.



Make sure there are no protrusions on the cutting surface after detaching the SIM card from its plastic package.



Quick Start Guide

Insert a pin or paper clip
(not supplied) into the SIM card
eject hole.

Eject the SIM tray. Place a SIM card on the SIM tray

so that the cutout of the SIM card
fits that of the SIM tray.

© 2011 Sony Corporation Printed in China 4-297-722-11 (1)

Insert the SIM tray.

Tablet Device SGPT11 Series



3seconds

Support Website

For more information about your
tablet device, see http://support.
sony-europe.com/computing/
tablet/

In the Box

AC adapter



AC power cord (mains lead)



Strap



Quick Start Guide (this document)



Important Information



Charging the Battery

Connect the AC power cord (mains lead), AC adapter, AC outlet (wall
socket) and your tablet device in the order shown by the numbers
in above figure.
Be sure to plug the AC adapter into the tablet device charge
connector in the direction shown above.

Turning On Your Tablet Device

After inserting a SIM card into your tablet device according to the
procedures on the back side of this guide, press and hold the

(power) button for three seconds.



When the tablet device turns on, perform the initial settings
according to the displayed instructions.

Accessing the Help guide

From your tablet device:



Tap [Apps] - [Help guide].

From a PC browser:



http://support.sony-europe.com/computing/tablet/manuals/
helpguide_sgpt1/GB