Sony PRSA-CL95 User Manual

Cover with Light for
Reader Daily Edition™

User Guide
PRSA-CL95

©2010 Sony Corporation Pr inted in China

Owner’s Record

The model number is located on the side of the holding slot, and the
serial number is located inside the battery compartment. Record them
in the space provided below. Refer to these numbers in the spaces
whenever you call upon your Sony dealer regarding this product.
Model No. ____________________________
Serial No. ____________________________

WARNING

The following FCC statement applies only to the version of this model
manufactured for sale in the USA. Other versions may not comply with
FCC technical regulations.

• This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

• You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.

4-260-104-11(1)

If the battery cover comes off

The battery cover is designed to come off if opened with
excessive force. To reattach the cover, insert the hook into the hole
on the battery case from one side  to side .

2 Pull the tabs, and insert it into the holes on the Reader™.

Tabs

Holes

3 Raise the flexible light arm and bend it towards the Reader

while adjusting the light unit to a suitable comfortable angle.

High

Light unit

Standard

Before use

Before using this cover, please read this User Guide thoroughly and
retain it for future reference.
PRSA-CL95 is the cover for Reader Daily EditionTM (PRS-950).

Getting started

1 Open the cover of the battery case, and insert the battery

(supplied).

Match  on the battery with  in the battery case.

Notes

• If you do not use the cover for a long period of time, remove the
battery to avoid damage from battery leakage and corrosion.

• Replace battery with a new battery when brightness is degraded.

When you raise the flexible light arm, the light is turned on
automatically, and when you place the flexible light arm back to
the initial position, the light is turned off automatically.

You can set the brightness of the light to (Standard) or (High).
If you need a brighter light, set the brightness control switch ()
to (High).

Notes

• If the battery is running low, the difference in brightness between
(High) and (Standard) may be indistinguishable.

• If the light does not turn on automatically when you raise the flexible
light arm, check the remaining battery level and check that the
battery is installed properly, or replace with a new battery.

After use

Storing the flexible light arm and turning off
the light

Holding slot

Straighten the flexible light arm up as illustrated and rotate the light
unit to its original position, then lower it into the holding slot. The light is
turned off automatically.

Notes

• Be sure the flexible light arm is stored in the holding slot properly.

• If the light does not turn off automatically, check the light window is facing

the device and the light unit stored in its original position ().

Notes on use

• Do not place the unit in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Vibrating
– Strong magnetic fields
– Sandy
– Exposed to direct sunlight

• Do not apply mechanical shock or drop the unit.

• Be sure that nothing metallic comes into contact with the metal parts of

this unit. If this happens, a short circuit may occur and the unit may be
damaged.

• Always keep the metal contacts clean.

• Do not disassemble or convert the unit.

• While the unit is in use, it gets warm. This is normal.

• Keep the unit away from TV or AM receivers, as it may disturb reception.

• To prevent possibly damaging the Reader, make sure that there is no dirt

or dust inside the cover or the Reader before use. If necessary, wipe the
cover or the Reader with a soft cloth, such as a cleaning cloth for
eyeglasses.

• Do not put any cards such as cash cards or credit cards with magnetic

coding near the magnet stored in the brightness control switch, light unit
or holding slot. Otherwise, your cards may become impaired due to the
magnetic effect.

• Do not directly look at the light.

On cleaning

Clean the unit with a soft dry cloth, or a soft cloth lightly moistened with a
mild detergent solution. Do not use any type of solvent, such as alcohol or
benzine, which may damage the finish.

If you have any questions about this product:

Support Website:

http://www.sony.com/readersupport

To remove the Reader

Pull the tabs, and remove the Reader.

Specifications

Brightness control

2 levels (Standard and High)

Battery life

Maximum 19 hours * (at Standard brightness) with a
AAA (LR03) battery

* The time above may differ depending on ambient temperature or

the status of use.

Operating temperature

41°F to 95°F (5°C to 35°C)

Dimensions

Approx. 6 1/8 x 8 1/8 x 3/4 inches (w/h/d)
(Approx. 155 x 204 x 19 mm)

Weight (battery included)

Approx. 6.5 oz (185 g)

Supplied items

AAA (LR03) battery × 1
User Guide × 1

Design and specifications are subject to change without notice.