SONY ELECTRONICS INC. PROVIDES
NO WARRANTY WITH REGARD TO
THIS MANUAL, THE SOFTWARE, OR
OTHER INFORMA TION CONTAINED
HEREIN AND HEREBY EXPRESSLY
DISCLAIMS ANY IMPLIED
WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR ANY PARTICULAR
PURPOSE WITH REGARD TO THIS
MANUAL, THE SOFTWARE, OR SUCH
OTHER INFORMA TION . IN NO EVENT
SHALL SONY ELECTRONICS INC. BE
LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, OR SPECIAL
DAMAGES, WHETHER BASED ON
TORT, CONTRACT, OR OTHERWISE,
ARISING OUT OF OR IN CONNECTION
WITH THIS MANUAL, THE SOFTWARE,
OR OTHER INFORMATION
CONTAINED HEREIN OR THE USE
THEREOF.
Sony Electronics Inc. reserves the right to
make any modification to this manual or
the information contained herein at any
time without notice. The software
described herein is governed by the terms
of a separate user license agreement.
This product contains software owned by
Sony and licensed by third parties. Use of
such software is subject to the terms and
conditions of license agreements enclosed
with this product. Some of the software
may not be transported or used outside the
United States. Software specifications are
subject to change without notice and may
not necessarily be identical to current r etail
versions.
Updates and additions to software may
require an additional charge . Subscri ptions
to online service providers may require a
fee and credit card information. Financial
services may require prior arrangements
with participating financial institutions.
As an ENERGY STAR
Partner, Sony Corporation
has determined that this
E
product meets the
S
TAR guidelines for energy
efficiency.
The International ENERGY STAR Office
Equipment Program is an international
program that promotes energy saving
through the use of computers and other
office equipment. The program backs the
development and dissemination of
products with functions that effectively
reduce energy consumption. It is an open
system in which business proprietors can
participate voluntarily. The targeted
products are office equipment such as
computers, displays, printers, facsimiles
and copiers. Their standards and logos are
uniform among participating nations.
E
NERGY STAR is a U.S. registered mark.
Sony, i.LINK, VAIO and the VAIO logo are
trademarks of Sony Corporation.
Windows, Windows NT, and the Windows
logo are registered trademarks of Micr osoft
Corporation. Intel, SpeedStep, and
Pentium are trademarks of Intel
Corporation.
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents and
other intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
All other trademarks are trademarks of
their respective owners.
NERGY
Owners Record
The model number and serial number are
located on the bottom of your Sony VAIO®
Notebook. Record the serial number in the
space provided here. Refer to the model
and serial number when you call your
Sony Service Center.
To prevent fire or shock hazard, do
not expose your notebook computer
to rain or moisture.
❏
To avoid electrical shock, do not open
the cabinet. Refer servicing to
qualified personnel only.
❏
Never install modem or telephone
wiring during a lightning storm.
❏
Never install telephone jacks in wet
locations unless the jack is specifically
designed for wet locations.
❏
Never touch uninsulated telephone
wire or terminals unless the telephone
line has been disconnected at the
network interface.
❏
Use caution when installing or
modifying telephone lines.
❏
Avoid using the modem during an
electrical storm.
❏
Do not use the modem or a telephone
to report a gas leak in the vicinity of
the leak.
❏
A socket outlet should be as close as
possible to the unit and easily
accessible.
To change the backup battery,
!
please contact your nearest Sony
Service Center.
Caution - The use of optical
!
instruments with this product will
increase eye hazard. As the laser
beam used in this product is
harmful to the eyes, do not
attempt to disassemble the
cabinet. Refer servicing to
qualified personnel only.
For DVD-ROM: Danger - Visible and
!
invisible laser radiation when
open. Avoid direct exposure to
beam.
For CD-RW: Danger - Invisible laser
!
radiation when open. Avoid direct
exposure to beam.
Caution: To reduce the risk of fire,
!
use only No. 26 AWG or larger
telecommunication line cord.
AVERTISSE
AVERTISSEMENT
❏
Pour prévenir tout risque d’incendie
ou d’électrocution, garder cet appar eil
à l’abri de la pluie et de l’humidité.
❏
Pour prévenir tout risque
d’électrocution, ne pas ouvrir le
châssis de cet appareil et ne confier
son entretien qu’à une personne
qualifiée.
❏
Ne jamais effectuer l’installatio n de fil
modem ou téléphone durant un orage
électrique.
❏
Ne jamais effectuer l’installation
d’une prise téléphonique dans un
endroit mouillé à moins que la prise
soit conçue à cet effet.
❏
Ne jamais toucher un fil téléphonique
à découvert ou un terminal à moins
que la ligne téléphonique n’ait été
débranché de l’interface réseau.
❏
Soyez très prudent lorsque vous
installez ou modifiez les lignes
téléphoniques.
❏
Évitez d’utiliser le modem durant un
orage électrique.
❏
N'utilisez pas le modem ni le
téléphone pour prévenir d'une fuite
de gaz vous êtes près de la fuite.
❏
L’appareil doit être le plus près
possible d’une prise murale pour en
faciliter l’accès.
Pour changer la pile de rechange,
!
veuillez contacter votre centre de
service Sony le plus près.
Avertissement - L'utilisation
!
d'instruments optiques avec ce
produit augmente les risques pour
les yeux. Puisque le faisceau laser
utilisé dans ce produit est
dommageable pour les yeux, ne
tentez pas de désassembler le
boîtier. Adressez-vous à un agent
de service qualifié.
Danger : Radiation laser visible et
!
invisible si ouvert. Évitez
lexposition directe au faisceau.
Pour les CD-RW : Danger :
!
Radiation laser visible et invisible
si ouvert. Évitez l'exposition
directe au faisceau.
Attention : Afin de réduire les
!
risques d'incendie, n'utilisez qu'un
cordon de communication N0. 26
AWG ou plus gros.
If you have questions about this product,
you can reach the Sony Customer
Information Service Center at 1-8884SONYPC; or write to the Sony Customer
Information Service Center at 12451
Gateway Blvd., Ft. Myers, FL 33913 or find
Sony Customer Service on the web at:
http://www.sony.com.pcsupport
The number below is for FCC related
matters only. Sony Customer Support can
be reached at http://www.sony.com/
pcsupport
Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: PCG-9241, PCG-9242,
Responsible Party: Sony Electronics Inc.
Address:1 Sony Drive
Telephone: 201-930-6972
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential inst allation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user
is encouraged to try to correct the
interference by one or more of the
following measures:
❏
Reorient or relocate the receiving
antenna.
❏
Increase the separation between the
equipment and the receiver.
❏
Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
❏
Consult the dealer or an experienced
radio/TV technician for help.
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
Only peripherals (computer input/output
devices, terminals, printers, etc.) that
comply with FCC Class B limits may be
attached to this computer product.
Operation with non-compliant peripherals
is likely to result in interference to radio
and television reception.
All cables used to connect peripherals must
be shielded and grounded. Operation with
cables, connected to peripherals, that are
not shielded and grounded, may result in
interference to radio and television
reception.
FCC Part 68
This equipment complies with Part 68 of
the FCC rules. On the bottom of this
equipment is a label that contains, among
other information, the FCC equivalence
number (REN) for this equipment. If
requested, this information must be
provided to the telephone company.
This modem uses the USOC RJ-1 1
telephone jack.
The REN is used to determine the quantity
of devices which may be connected to the
telephone line. Excessive RENs on the
telephone line may result in the devices not
ringing in response to an incoming call. In
most, but not all areas, the sum of the RENs
should not exceed five (5.0). To be certain
of the number of devices that may be
connected to the line, as determined by the
total RENs, contact the telephone company
to determine the maximum REN for the
calling area.
If the terminal equipment causes harm to
the telephone network, the telephone
company will notify you in advance that
temporary discontinuance of service may
be required. But if advance notice is not
practical, the telephone company will
notify the customer as soon as possible.
Also, you will be advised of your right to
file a complaint with the FCC if you believe
it is necessary.
The telephone company may make
changes in its facilities, equipment,
operations or procedures that could affect
the operations of the equipment. If this
happens, the telephone company will
provide advance notice in order for you to
make the necessary modifications in order
to maintain uninterrupted service.
If trouble is experienced with this
equipment, you can reach the Sony
Customer Information Service Center at 1888-4SONYPC; or write to the Sony
Customer Information Service Center at
12451 Gateway Blvd., Ft. Myers, FL 33913
or find Sony Customer Service on the web
at: http://www.sony.com.pcsupport
Repair of this equipment should be made
only by a Sony Service Center or Sony
authorized agent. For the Sony Service
Center nearest you, call 1-888-4SONYPC
(1-888-476-6972).
This equipment cannot be used on public
coin service provided by the telephone
company. Connection to Party Line Service
is subject to state and possible provincial
tariffs. (Contact the state or pr ovincial
utility service commission, public service
commission, or corporation commission,
for information.)
Telephone Consumer
Protection Act of 1991
(United States)
The T elephone Consumer Pr otection Act of
1991 makes it unlawful for any person to
use a computer or other electronic device to
send any message via a telephone facsimile
machine unless such message clearly
contains, in a margin at the top or bottom
of each transmitted page or on the first
page of the transmission, the date and time
it is sent and an identification of the
business, other entity, or individual
sending the message, and the telephone
number of the sending machine or such
business, other entity, or individual.
In order to program this information into
your facsimile machine, see your fax
software documentation.
Telephone Consumer
Guidelines (Canada)
Please refer to your telephone directory
under ‘Privacy Issues’ and/or ‘Terms of
Service.’ For more detailed information,
please contact:
CRTC
Terrasses de la Chaudiére, Tour centrale
1 promenade du Portage, 5 étage Hull PQ
K1A 0N2.
This Class B digital apparatus complies
with Canadian ICES-003.
Cet àppareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Do not handle damaged or leaking
!
lithium ion batteries.
Ne pas manipuler les batteries au
!
lithium-ion qui fuient ou sont
endommagées.
Danger of explosion if battery is
!
incorrectly replaced. Replace only
with the same or equivalent type
recommended by the
manufacturer. Discard used
batteries according to the
manufacturers instructions.
Une batterie non conforme
!
présente un danger d'explosion.
La remplacer seulement par une
batterie identique ou de type
équivalent recommandé par le
fabricant. Évacuer les batteries
usées selon les directives du
fabricant.
DISPOSAL OF LITHIUM ION
BATTERY
You can return your unwanted lithium ion
batteries to your nearest Sony Service
Center or Factory Service Center.
In some areas the disposal of lithium ion
✍
batteries in household or business trash
may be prohibited.
For the Sony Service Center nearest you,
call 1-888-476-6972 in the United States or
1-800-961-7669 in Canada.
The battery pack used in this
!
device may present a fire or
chemical burn hazard if mistreated.
Do not disassemble, heat above
212°F (100°C) or incinerate.
Dispose of used battery promptly.
Keep away from children.
La manutention incorrecte du
!
module de batterie de cet appareil
présente un risque d'incendie ou
de brûlures chimiques. Ne pas
démonter, incinérer ou exposer à
une température de plus de 100°C.
Évacuer promptement la batterie
usée. Garder hors de portée des
enfants.
INDUSTRY CANADA NOTICE
NOTICE: The Industry Canada label
identifies certified equipment. This
certification means that the equipment
meets certain telecommunications network
protective, operational and safety
requirements as prescribed in the
appropriate Terminal Equipment Technical
Requirements document(s). The
Department does not guarantee the
equipment will operate to the user’s
satisfaction.
Before installing this equipment, users
should ensure that it is permissible to be
connected to the facilities of the local
telecommunications company. The
equipment must also be installed using an
acceptable method of connection.
The customer should be aware that
compliance with the above conditions may
not prevent degradation of service in some
situations.
Repairs to certified equipment should be
coordinated by a representative designated
by the supplier. Equipment malfunctions
or any repairs or alterations made by the
user to this equipment may give the
telecommunications company cause to
request that the user disconnect the
equipment.
Users should ensure for their own
protection that the electrical ground
connections of the power utility, telephone
lines and internal metallic water pipe
system, if present, are connected together.
This precaution may be particularly
important in rural areas.
Caution: Users should not attempt to make
such connections themselves, but should
contact the appropriate electric inspection
authority, or electrician, as appropriate.
NOTICE: The Ringer Equivalence Number
(REN) assigned to each terminal device
provides an indication of the maximum
number of terminals allowed to be
connected to a telephone interface. The
termination on an interface may consist of
any combination of devices subject only to
the requirement that the sum of the Ringer
Equivalence Numbers of all the devices
does not exceed 5. The Ringer Equivalence
Number for this equipment is 0.0.
AVIS DE LINDUSTRIE
CANADA
AVIS: L’étiquette d’Industrie Canada
identifie le matériel homologué.
Cette étiquette certifie que le matériel est
conforme aux normes de protection,
d’exploitation et de sécurité des réseaux de
télécommunications, comme le prescrivent
les documents concernant les exigences
techniques relatives au matériel terminal.
Le Ministère n’assure toutefois pas que le
matériel fonctionnera à la satisfaction de
l’utilisateur.
Avant d’installer ce matériel, l’utilisateur
doit s’assurer qu’il est permis de le
raccorder aux installations de l’entreprise
locale de télécommunication. Le matériel
doit également être installé en suivant une
méthode acceptée de raccordement.
L’abonné ne doit pas oublier qu’il est
possible que la conformité aux conditions
énoncées ci-dessus n’empêche pas la
dégradation du service dans certaines
situations.
Les réparations de matériel homologué
doivent être coordonnées par un
représentant désigné par le fournisseur.
L’entreprise de télécommunications peut
demander à l’utilisateur de débrancher un
appareil à la suite de réparations ou de
modifications effectuées par l’utilisateur ou
à cause de mauvais fonctionnement.
Pour sa propre protection, l’utilisateur doit
s’assurer que tous les fils de mise à la terre
de la source d’énergie électrique, des lignes
téléphoniques et des canalisations d’eau
métalliques, s’il y en a, sont raccordés
ensemble. Cette précaution est
particulièrement importante dans les
régions rurales.
Avertissement: L’ut il i sateur ne doit pas
tenter de faire ces raccordements lui-même;
il doit avoir recours à un service
d’inspection des installations électriques,
ou à un électricien, selon le cas.
A VIS: L’indice d’équivalence de la sonnerie
(IES) assigné à chaque dispositif terminal
indique le nombre maximal de terminaux
qui peuvent être raccordés à une interface.
La terminaison d’une interface
téléphonique peut consister en une
combination de quelques dispositifs, à la
seule condition que la somme d’indices
d’équivalence de la sonnerie de tous les
dispositifs n’excède pas 5. L’indice
d’équivalence de la sonnerie de ce matériel
est de 0.0.
Index ................................................................................... 89
NEE
Welcome
Congratulations on your purchase of the Sony VAIO® notebook. Sony
has combined leading-edge technology in audio, video, computing, and
communications to provide you with state-of-the-art personal
computing.
Features
For a complete description of the specifications of your VAIO® notebook, see page 85.
✍
❑
Exceptional performance: Your notebook includes a fast Intel®
Pentium® III processor and a V.90 compatible 56K modem.
❑
Portability: The rechargeable battery pack provides hours of use
without AC power.
❑
Sony audio and video quality: High-quality MPEG1/MPEG2 video,
which supports full-screen display and enables you to take
advantage of today’s advanced multimedia applications, games, and
entertainment software.
❑
Multimedia features: Enjoy the stereo speakers or use a headphone
(not supplied) to listen to audio and video CDs.
❑
Microsoft® Windows® operating system: Your system includes
Microsoft® Windows® 98 Second Edition or Microsoft® Windows®
2000 Professional.
❑
Communications: Access popular online services, send e-mail,
browse the Internet, and use fax features.
❑
Digital Versatile Disc (DVD)†: This new optical storage technology
that provides increased storage capacity and a rich multimedia
computing experience. DVD-ROM drives play both DVD-ROM and
CD-ROM discs.
* Actual upload and download speeds may vary due to line conditions, ISP support, and government.
Certain specially-configured systems may come with a CD-RW drive instead of a DVD-ROM drive.
*
VAIO® Notebook User Guide
Unpacking Your Notebook
Remove the following hardware items from the box:
Main unit
Rechargeable
battery pack
Power cord
AC adapter
Weig ht save r
The removable floppy disk drive is located in the multipurpose bay.
Video cable
Manuals
❑
Read Me First contains Frequently Asked Questions, the most up-todate information on using your computer, and software support
information.
❑
The VAIO® Notebook User Guide (this manual) contains information
on how to get the most from your computer, find help, and solve
common problems. It also includes product specifications.
❑
The VAIO® Consumer Information Guide contains ergonomic
considerations and your computer’s limited warranty statement.
❑
The Microsoft® Windows® 98 Second Edition Getting Started manual
or Microsoft® Windows® 2000 Professional Getting Started manual
explains how to use the basic features of the Windows®
operating
system.
Recovery CDs
❑
System Recovery CD(s)
❑
Application Recovery CD(s)
Software CDs
❑
Microsoft® Word 2000
Other
❑
Setting up your VAIO® Notebook (poster)
❑
Packet containing special product offers
Unpacking Your Notebook
!
"
Setting Up Your Notebook
This section describes how to start using your computer and how to use
your computer’s internal and external devices such as the touchpad,
floppy disk drive, and DVD-ROM drive.
Ergonomic Considerations
You will be using your notebook computer as a portable device in a
variety of environments. Whenever possible, you should attempt to
apply the following ergonomic considerations to both stationary and
portable environments.
Computer positioned
directly in front of you
Arms at desk
level
Wrists relaxed
and flat
❑
Position of your computer – Place the computer directly in front of
you as you work. Keep your forearms horizontal, with your wrists in
a neutral, comfortable position while using the keyboard, touchpad,
#
$
VAIO® Notebook User Guide
or external mouse. Let your upper arms hang naturally at your sides.
Take breaks during sessions with your computer. Excessive use of the
computer may strain muscles or tendons.
❑
Furniture and posture – Sit in a chair with good back support and
armrests. Adjust the level of the chair so your feet are flat on the floor.
A footrest may make you more comfortable. Sit in a relaxed, upright
posture and avoid slouching forward or leaning far backward.
❑
Viewing angle of the computer’s display – Use the display’s tilting
feature to find the best position. Y ou can r educe eye strain and muscle
fatigue by adjusting the tilt of the display to the proper position.
Adjust the brightness setting of the display also.
❑
Lighting – Choose a location where windows and lights do not create
glare and reflection on the display. Use indirect lighting to avoid
bright spots on the display. You can also purchase accessories for
your display that help reduce glare. Proper lighting adds to your
comfort and work effectiveness.
❑
Placement of an external display – When using an external display,
set the display at a comfortable viewing distance. Make sure the
display screen is at eye level or slightly lower when you ar e sitting in
front of the monitor.
Notes on Setup
❑
Do not place your computer in a location subject to:
❑
Heat sources, such as radiators or air ducts
❑
Direct sunlight
❑
Excessive dust
❑
Moisture or rain
❑
Mechanical vibration or shock
❑
Strong magnets or speakers that are not magnetically shielded
❑
Ambient temperature of more than 95º F (35º C) or less than 18º F
(10º C)
❑
High humidity
❑
Do not place electronic equipment near your computer. The
computer’s electromagnetic field may cause a malfunction.
Ergonomic Considerations
❑
Provide adequate air circulation to prevent interna l hea t buildup. Do
not place your computer on porous surfaces such as rugs or blankets,
or near materials such as curtains or draperies that may block its
ventilation slots. Leave a space of at least 8 inches (20 cm) behind the
back panel of the computer.
❑
If the computer is brought directly from a cold location to a warm
one, moisture may condense inside your computer. In this case, allow
at least an hour before turning on your computer. If any problems
occur, unplug your computer, and contact your Sony Service Center.
❑
The computer uses high-frequency radio signals and may cause
interference to radio or TV reception. Should this occur, relocate the
computer a suitable distance away from the set.
❑
Use only specified peripheral equipment and interface cables;
otherwise, problems may result.
❑
Do not use cut or damaged connection cables.
❑
Y our computer will not work with party lines, cannot be connected to
a coin-operated telephone, and may not work with multiple phone
lines or a private branch exchange (PBX).
❑
If the telephone company makes a service call to your home or office
and determines that your computer is responsible for a problem, the
telephone company may bill you for the service call. Also, if you do
not disconnect your computer when it is adversely affecting the
telephone line, the telephone company has the right to disconnect
your service until you correct the problem.
%
&
VAIO® Notebook User Guide
Handling Your Notebook
❑
Clean the cabinet with a soft, dry cloth or a soft cloth lightly
moistened with a mild detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent such as alcohol or benzine,
as these may damage the finish of your computer.
❑
Should any solid object or liquid fall into the computer, shut down
your computer and then unplug it. You may want to have the
computer checked by qualified personnel before operating it any
further.
❑
Do not drop the computer or place heavy objects on top of the
computer.
Customizing Your VAIO® Notebook
for information on use)
24
Power buttonMultipurpose drive bay (pages 28, 46, 49)
3
DVD-ROM drive (page 31)
*
* Certain specifically-configured systems may come with a CD-RW drive instead of a DVD drive.
Back
cover
Modem jack (page 52)
15
26
/Mouse/Keyboard connector (page 62)
37
4
Serial connector
Printer connector (page 58)
Monitor connector (page 59)
USB connectors (page 68)
DC In connector (page 12)
Locating Controls and Connectors
3
There is a ventilation slot located between the USB connector and the DC In connector. Do
✍
not cover the ventilation slot when your computer is on.
Bottom
Port replicator connector cover (pages 54, 56)Tilt stands
1
Multipurpose drive bay RELEASE lever (pages 48, 50)
2
VAIO® Notebook User Guide
Connecting a Power Source
You can use either AC power or a rechargeable battery pack as a power
source.
Using the AC Adapter
1
Plug the cable attached to the AC adapter into the DC In connector on
the computer.
2
Plug one end of the power cord into the AC adapter.
3
Plug the other end of the power cord into an AC outlet.
Notebook
AC adapter
(supplied)
DC In
Notes on the AC Adapter
❑
Your computer operates on 100V-240V AC 50/60 Hz.
❑
Do not share the AC outlet with other power-consuming equipment,
such as a copy machine or shredder.
❑
You can purchase a power strip with a surge protector. This device
prevents damage to your computer caused by sudden power surges
such as those that may occur during an electrical storm.
❑
Do not place heavy objects on the power cord.
❑
To disconnect the cord, pull it out by the plug. Never pull the cord
itself.
❑
Unplug your computer from the wall outlet if you will not be using
the computer for a long time.
❑
When the AC adapter is not used, unplug it from the AC outlet.
❑
Use only the AC adapter supplied. Do not use any other AC adapter.
Power cord (supplied)
Connecting a Power Source
!
Using Battery Power
You can use one or two battery packs as a source of power. The second
battery pack inserts into the multipurpose drive bay on the right side of
the computer . (See “Using Power Saving Modes” on page 44.) Additional
battery packs are available as a separate option.
The battery pack that comes with your computer is not fully charged at
the time of purchase. Follow the steps below to insert and charge the
battery pack.
To insert the battery pack
1
Open the cover of the battery bay.
2
Insert the battery pack into the battery bay on the left side of the
computer.
Battery pack
(supplied)
Label side facing down
3
Close the cover of the battery bay until it clicks.
✍
When attaching your computer to the port replicator, do not attempt to insert or remove the
battery pack. Lifting and turning the computer with a port replicator attached could cause a
temporary loss of power.
"
VAIO® Notebook User Guide
To charge the battery pack
1
Connect the AC adapter to the computer.
2
Insert the battery pack.
The computer automatically charges the battery (the battery indicator
light flashes in a double-blink pattern as the battery charges). When the
battery is 85 percent full, the battery indicator light turns off. This
process takes approximately two hours. To charge the battery
completely, continue charging for an additional hour. See “Displaying
Detailed Battery Information” in the online manual Customizing Your VA IO ® Notebook for information on checking the battery life.
There are two battery indicator lights on the computer:
Battery indicators
Secondary battery pack
(not supplied)
Battery pack (supplied)
Battery IndicatorMeaning
1
2
Battery Indicator
Light StatusMeaning
OnThe computer is using battery power.
Single blinkThe battery is running out of power.
Double blinkThe battery is charging.
OffThe computer is using AC power.
Indicates the status of the battery pack in the battery bay
on the left side of the comput er.
Indicates the status of the battery pack in the
multipurpose drive bay on the right side of the computer .
Connecting a Power Source
To determine the amount of time the battery lasts, see Displaying Battery Information in
✍
the online manual Customizing Your VAIO® Notebook. When the battery power is running
low, both the battery and power indicators blink.
When the computer is directly connected to AC power and has a battery pack in the battery
bay, it uses power from the AC outlet.
See Using a Second Battery Pack on page 46 for information on installing and charging a
battery pack in the multipurpose drive bay.
Keep the battery pack in the computer while it is directly connected to AC power. The battery
pack continues to charge while you are using the computer.
If the battery level falls below 10%, you should either attach the AC adapter to recharge the
battery or shut down your computer and insert a fully charged battery.
You can extend battery life by changing the power-management modes in the PowerPanel
utility. See Using Power Saving Modes on page 44.
The battery pack supplied with your computer is a lithium ion battery and can be recharged at
any time. Charging a partially discharged battery does not affect battery life.
The battery indicator light is on while you use the battery pack as a power source. When
battery life is nearly depleted, the battery indicator starts flashing.
For some software applications and some peripheral devices, your computer may not enter
System Hibernation mode when the battery life is low. To avoid loss of data when using
battery power, you should save your data frequently and manually activate a powermanagement mode, such as System Suspend or System Hibernation.
#
$
VAIO® Notebook User Guide
To remove the battery pack
1
Open the cover of the battery bay.
2
Pull out the battery pack.
3
Close the cover of the battery bay.
You will lose data if you remove the battery pack while the computer is on and
!
not connected to the AC adapter or if you remove the battery while the
computer is in System Suspend/System Idle mode.
Additional Notes on Batteries
❑
Never leave the battery pack in temperatures above 140° F (60° C),
such as under direct sunlight or in a car parked in the sun.
❑
Battery life is shorter in a cold environment. This is due to decreased
battery efficiency at low temperatures.
❑
Charge the batteries at temperatures between 50° F and 80° F (10° C
to 30° C). Lower temperatures require a longer charging time.
❑
While the battery is in use or being discharged, the battery pack heats
up. This is normal and is not cause for concern.
❑
Keep the battery pack away from all sources of heat.
❑
Keep the battery pack dry.
❑
Do not open or try to disassemble the battery pack.
❑
Do not expose the battery pack to any mechanical shock.
❑
If you are not using the computer for an extended period of time,
remove the battery pack from the computer to prevent damage to the
battery.
❑
If, after fully charging the battery pack, the battery power is still low,
the battery pack may be reaching the end of its life and should be
replaced.
❑
You do not need to discharge the battery before recharging.
Connecting a Power Source
❑
If you have not used the battery pack for a considerable amount of
time, recharge the battery.
%
&
VAIO® Notebook User Guide
Starting Your Computer
1
Slide the LCD lock lever in the direction of the arrow, and lift the
cover.
LCD lock lever
2
Press the power button on top of the computer until the green power
indicator light turns on.
Power
button
Power indicator
✍
If you hold the power button in the On position for more than four seconds, the
computer turns off.
3
If necessary, adjust the brightness controls for the LCD display. To
decrease the brightness, press Fn+F5 and then the down or left ar r ow
key. To increase the brightness, press Fn+F5 and then the up or right
arrow key.
Power button
Loading...
+ 76 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.