If you have any questions or for the latest support
information on navigation, visit the website below:
http://www.navu.sony-europe.com/support
Bitte kreuzen Sie zunächst die genaue
Modellbezeichnung in dem dafür vorgesehenen Feld
an.
Tragen Sie danach die Seriennummer (SERIAL NO.) in
dem reservierten Feld ein. Sie finden diese auf einem
Aufkleber, der auf dem Gerätegehäuse angebracht ist.
Nehmen Sie den ausgefüllten Geräte-Pass
anschließend unbedingt aus der Bedienungsanleitung
heraus, falls Sie diese im Fahrzeug aufbewahren
möchten. Bitte bewahren Sie den Geräte-Pass an
einem sicheren Ort auf. Er kann im Falle eines
Diebstahls zur ldentifikation lhres Eigentums dienen.
caraudio
Geräte-Pass
Dieser Geräte-Pass dient als Eigentumsnachweis
für Ihr caraudio-Gerät im Falle eines Diebstahls.
Wir empfehlen, den Geräte-Pass nicht im
Fahrzeug aufzubewahren, um Missbrauch zu
verhindern.
Modellbezeichnung
sNV-U93T
sNV-U83
sNV-U73T
sNV-U53
Seriennummer (SERIAL NO.)
Personal Navigation System
Personal Navigation System
Quick Start Guide
NV-U93T NV-U83
3-275-816-11 (1)
Quick Start Guide
Anleitung zur schnellen
Inbetriebnahme
Guide de démarrage
rapide
Beknopte handleiding
Guida rapida all’uso
Guía de inicio rápido
Snabbstartguide
Guia de iniciação rápida
GB
DE
FR
NL
IT
ES
SE
PT
How to use this manual
When reading this manual, keep the control
layout illustration (on the rear of this page or the
adjacent page) open for quick reference from any
page.
Hinweis zu dieser
Bedienungsanleitung
Wenn Sie diese Bedienungsanleitung lesen,
klappen Sie die Abbildung mit den
Bedienelementen (auf der Rückseite dieser Seite
oder der Seite daneben) auf. So haben Sie sie
beim Lesen immer im Blick.
Comment utiliser ce manuel
Lorsque vous lisez ce manuel, gardez le rabat des
illustrations des commandes (au verso de cette
page ou sur la page adjacente) ouvert pour
pouvoir vous y référer rapidement à partir de
n’importe quelle page.
Deze handleiding gebruiken
Wanneer u deze handleiding leest, houdt u de
illustratie met onderdelen van het apparaat (aan
de achterzijde van deze pagina of de
tegenoverliggende pagina) geopend zodat u deze
vanaf elke pagina snel kunt raadplegen.
Uso del presente manuale
Durante la consultazione del presente manuale,
tenere aperte le illustrazioni di layout di controllo
(nella parte posteriore di questa pagina o in
quella adiacente) per una consultazione rapida in
qualsiasi momento.
Cómo utilizar este manual
Cuando lea este manual, mantenga abierta la
ilustración del diseño de control (en la parte
posterior de esta página o en la página siguiente)
para poder consultarla rápidamente desde
cualquier página.
Hur du använder den här
bruksanvisningen
När du läser den här bruksanvisningen bör du ha
bilden över kontrollerna (på baksidan av den här
sidan eller på nästa sida) öppen för snabb
referens från sidan du är på.
Como utilizar este manual
Quando ler este manual, mantenha aberta a
ilustração do esquema de controlo (no verso
desta página ou a página adjacente), para
possibilitar uma consulta rápida a partir de
qualquer página.
• This Quick Start Guide contains instructions
for basic operations of NV-U93T, U83,
U73T, and U53.
– Before installing and operating this
system, read this manual and the supplied
“Read This First” (Installation Manual)
thoroughly.
For more information, see the PDF manual
on the supplied Application Disc.
– NV-U93T is the model used for screen
illustration purposes.
– Available functions such as POSITION
plus, Bluetooth, or TMC differ depending
on the model.
Check your model name, and refer to the
difference indications in each section of
this manual.
• Illustrations in this manual may differ from
the actual device.
• Retain this manual and “Read This First” in
a place where you can refer to them at any
future time.
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
collection systems)
packaging indicates that this product shall not be treated
as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please contact
your local Civic Office, your household waste disposal
service or the shop where you purchased the product.
Applicable accessory: Car battery adapter
This symbol on the product or on its
Disposal of waste batteries
(applicable in the European Union
and other European countries with
separate collection systems)
This symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste. By ensuring these batteries are
disposed of correctly, you will help prevent potentially
negative consequences for the environment and human
health which could otherwise be caused by inappropriate
waste handling of the battery. The recycling of the
materials will help to conserve natural resources. In case
of products that for safety, performance or data integrity
reasons require a permanent connection with an
incorporated battery, this battery should be replaced by
qualified service staff only. To ensure that the battery will
be treated properly, hand over the product at end-of-life to
the applicable collection point for the recycling of
electrical and electronic equipment. For all other batteries,
please view the section on how to remove the battery from
the product safely. Hand the battery over to the applicable
collection point for the recycling of waste batteries. For
more detailed information about recycling of this product
or battery, please contact your local Civic Office, your
household waste disposal service or the shop where you
purchased the product.
On copyrights
The map and POI data may contain copyrighted
material. Copyrighted data on a “Memory Stick
Duo” should be used within the limits of the
copyright law. Do not violate the previsions of the
copyright law.
On trademarks
• Microsoft and Windows are registered trademarks
of Microsoft Corporation.
•“Memory Stick”, , “Memory Stick Duo”,
, “Memory Stick PRO Duo”,
, “Memory Stick Micro”
(“M2”), “MagicGate”, , “nav-u”
and are trademarks of Sony
Corporation.
“MagicGate” is a generic name of a copyright
protection technology, developed by Sony
Corporation.
• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Sony Corporation is under license.
• All other trademarks are trademarks of their
respective owners.
V-Trafic Information in France is
provided by Mediamobile
company.
Traffic Information in the UK is
provided by ITIS Holdings Plc.
Hereby, Sony Corp., declares that these NV-U93T/
U83 are in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC. For details, please access the
following URL:
http://www.compliance.sony.de/
Use of this radio equipment is not allowed in the
geographical area within a radius of 20 km from
the centre of Ny-Alesund, Svalbard in Norway.
NV-U73T/U53
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo,
108-0075 Japan.
The Authorized Representative for EMC and
product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
For any service or guarantee matters please refer to
the addresses given in separate service or guarantee
documents.
Caution
IN NO EVENT SHALL SONY BE LIABLE
FOR ANY INCIDENTAL, INDIRECT OR
CONSEQUENTIAL DAMAGES OR OTHER
DAMAGES INCLUDING WITHOUT
LIMITATION LOSS OF PROFITS, LOSS OF
REVENUE, LOSS OF DATA, LOSS OF USE
OF THE PRODUCT OR ANY ASSOCIATED
EQUIPMENT, DOWNTIME, AND
PURCHASER’S TIME RELATED TO OR
ARISING OUT OF THE USE OF THIS
PRODUCT, ITS HARDWARE AND/OR ITS
SOFTWARE.
PLEASE READ THIS MANUAL AND THE
SUPPLIED READ THIS FIRST (INSTALLATION
MANUAL) COMPLETELY BEFORE
INSTALLING OR OPERATING YOUR
PERSONAL NAVIGATION SYSTEM.
IMPROPER INSTALLATION OR USE OF THIS
DEVICE MAY CAUSE ACCIDENT, INJURY OR
DEATH.
Be sure to use the supplied or optional car battery
adapter or AC adapter, which is compatible with
the unit/cradle. Otherwise, excessive voltage may
be applied to the unit/cradle and may cause
smoke, fire, or accident.
For details on optional accessories for your
model, see “Specifications” on page 19.
On safety
•Be sure to:
– install the navigation system in a safe place
where it does not obstruct the driver’s view.
– not install the unit above an airbag.
– place the cables and cradle where they do not
obstruct driving.
– attach the unit to the cradle properly, otherwise
the unit may fall.
– clean the surface of the suction cup and
attachment surface before attaching. When
installing on the dashboard, clean the surface on
which the suction cup will be attached. Also,
confirm that the suction cup is securely attached
after installation. Otherwise, the unit or cradle
may fall.
Failure to do so may result in unsafe driving
conditions.
• Do not apply excessive force to the unit or cradle
as it may fall.
• Comply with local traffic rules, laws and
regulations.
• Do not continuously watch the unit while driving.
It is dangerous and may cause a traffic accident.
• If you need to operate the navigation system while
driving, be sure to stop the car in a safe place
before operating.
• Do not modify the unit.
• Do not disassemble the unit except when
disposing of it.
6
On handling
• Do not let foreign objects get inside the connector
of the unit, as it may cause a malfunction.
• When the unit is not in use, turn it off by pressing
?/1 (1)/sliding ?/1 (1). Remove the unit from
the cradle, then disconnect the car battery adapter,
otherwise battery drain may result. Note the
following:
If your car’s cigarette lighter socket is not
connected to ACC on your ignition switch, power
will continue to be supplied to the unit’s built-in
power supply even when the ignition is off or the
unit is not in use.
• Do not connect any accessory other than those
supplied or optional.
• Do not expose the unit to fire or water, as it may
cause malfunction.
• To disconnect a cable, pull it out by grasping the
plug, not the cable.
• Be sure to remove the unit out of the car when
leaving your car to prevent theft or high
temperature damage inside the car.
• Note that the built-in battery cannot be charged
outside the temperature range 5 – 45 ºC (41 –
113 ºF).
• Do not leave the unit in high ambient temperature
as the built-in battery capacity will deteriorate, or
will become unchargeable.
On GPS
As GPS information is obtained from satellites, it
may be impossible or difficult to obtain information
in locations such as:
• Tunnel or underground
• Under a highway
• Between high buildings
• Between tall trees with dense foliage
Note
GPS signal reception may be poor depending on the
material of the car’s windscreen.
On the positioning system
(POSITION plus)
(NV-U93T/U83 only)
The system has a function that allows the current car
position to be correctly displayed even at locations
where the GPS signal is temporarily interrupted or
poorly received, as when going under an overpass.
To activate this function, do the following:
– Attach the unit to the cradle.
– Drive for a while in an area where the GPS
signal is clearly received.
The positioning system will become ready for
operation after you have driven a little with the unit
on.
Notes
• The accuracy of this function may deteriorate if the
unit is installed near a heated or heat-reflecting
windscreen.
• Depending on the conditions, the current car
position or the movement may not be accurately
displayed. This, however, will be corrected as soon
as the GPS signal reception resumes.
• This function is available only during route guidance.
IMPORTANT NOTICE for the
Bluetooth function!
(NV-U93T/U83 only)
Safe and efficient use
Changes or modifications to this unit not expressly
approved by Sony may void the user’s authority to
operate the equipment.
Please check for exceptions, due to national
requirement or limitations, in usage of Bluetooth
equipment before using this product.
Driving
Check the laws and regulations on the use of mobile
(cellular) phones and hands-free equipment in the
areas where you drive.
Always give full attention to driving and pull off the
road and park before making or answering a call if
driving conditions so require.
Radio frequency exposure
RF signals may affect improperly installed or
inadequately shielded electronic systems in cars,
such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed
control systems or air bag systems. For installation
or service of this device, please consult with the
manufacturer or its representative of your car. Faulty
installation or service may be dangerous and may
invalidate any warranty that may apply to this
device.
Consult with the manufacturer of your car to ensure
that the use of your mobile (cellular) phone in the
car will not affect its electronic system.
Check regularly that all wireless device equipment
in your car is mounted and operating properly.
Connecting to other devices
When connecting to any other device, please read its
user guide for detailed safety instructions.
Emergency calls
This Bluetooth car hands-free and the electronic
device connected to the hands-free operate using
radio signals, mobile (cellular) phone, and landline
networks as well as user-programmed function,
which cannot guarantee connection under all
conditions. Therefore do not rely solely upon any
electronic device for essential communications
(such as medical emergencies).
Remember, in order to make or receive calls, the
hands-free and the electronic device connected to
the hands-free must be switched on in a service area
with adequate cellular signal strength.
Emergency calls may not be possible on all mobile
(cellular) phone networks or when certain network
services and/or phone features are in use.
Check with your local service provider.
On the software
Read the “END-USER LICENSE AGREEMENT”
carefully before use.
7
Location of controls
Refer to the pages listed for details.
NV-U93T/U83
a ?/1 (on/standby) button 9
To turn the unit on/off.
b Built-in microphone
To talk on the telephone using the Bluetooth
function.
c Screen buttons 12
d Display window/touch screen
e Auto dimmer sensor
Detects ambient light and automatically
adjusts the display brightness.
f (Bluetooth) indicator
Lights up in blue while outputting the
Bluetooth signal.
g CHG (battery charge) indicator
Lights up in red while charging, and changes
to green when fully charged.
When the adapter is disconnected, the
indicator goes off.
h Cradle connector
i RESET button 22
j DC IN 5V jack
To connect to the car battery adapter or AC
adapter*.
k (USB) jack 15
To connect to a computer with the USB
cable.
l OPEN/RELEASE button
To open the built-in GPS aerial or remove the
unit from the cradle.
For details, see the supplied “Read This
First” (Installation Manual).
m Nameplate
n Built-in GPS aerial
8
o Speaker
Outputs guidance and warnings.
p Memory Stick access indicator
q (Memory Stick Duo) slot
For “Memory Stick Duo” insertion for
functional expansion.
r i (headphones) jack
NV-U73T/U53
A ?/1 (on/standby) switch 9
To turn the unit on/off.
B Screen buttons 12
C CHG (battery charge) indicator
Lights up in red while charging, and changes
to green when fully charged.
When the adapter is disconnected, the
indicator goes off.
D Auto dimmer sensor
Detects ambient light and automatically
adjusts the display brightness.
E Display window/touch screen
F Name plate
G Speaker
Outputs guidance and warnings.
H RELEASE button
To remove the unit from the cradle.
For details, see the supplied “Read This
First” (Installation Manual).
I Memory Stick access indicator
J (Memory Stick Duo) slot
For “Memory Stick Duo” insertion for
functional expansion.
K Built-in GPS aerial
L GPS ANT (GPS antenna (aerial)) jack
To connect the External GPS Antenna VCA42*.
M (USB) jack 15
To connect to a computer with the USB
cable.
N TMC (TMC aerial) jack (NV-U73T only)
To connect the supplied TMC aerial.
O DC IN 5-5.2V jack
To connect to the car battery adapter or AC
adapter*.
P RESET button 22
* Optional accessory
Turning the unit on/off
Basic Operations
Common procedures to operate the system are
explained.
General operations can be performed on the
touch screen. Touch the displayed icons with
your finger gently.
Note
Do not press the display with excessive force, or use
any sharp article, such as a pen, etc., to tap on the
display.
NV-U93T/U83
Press ?/1 (1).
NV-U73T/U53
Slide ?/1 (1).
Note
If you do not use the unit for a long term, the built-in
battery may be depleted, and the unit will not turn on.
In such a case, connect the car battery adapter and
charge the unit.
After you charge the unit, it may take time to receive
GPS signals when turning on the unit.
Performing initial setup
Follow the on-screen instructions to perform the
setup.
The setting can then be further configured in the
setting menu at any time (page 13).
Receiving GPS signals
After the initial installation, park your car in a
safe, open place (no high buildings, etc.) for up
to 20 minutes to allow for GPS signals to
calculate the current car position properly before
using the navigation system.
The GPS signal reception condition icon is
displayed on the screen. The indicator lights
up in red when the signal cannot be received.
Menu operation
The top menu appears when turning on the unit
(except during route guidance, in which case the
map appears).
To show the top menu from the map display,
touch the map.
To return to the top menu from any menu display,
touch VOICE/POS., then touch the map.
During menu operation:
To return to the previous display, touch or
.
To cancel the menu selection, touch VOICE/
POS. (the current car position display appears).
9
Gesture Command operation
Keyboard operation
In map displays (except in map scrolling mode),
by assigning a screen finger stroke such as line,
etc., frequently-used operations can be
performed easily.
ToDraw
start navigation to
your home
a circumflex
start navigation to the
nearest POI (Point Of
Interest) stored on
Quick Links*
Make a call to your
home (NV-U93T/U83
only)
* For details on Quick Links, see page 11.
Quick Link 1
horizontal line
(left to right)
Quick Link 2
vertical line
(downwards)
Quick Link 3
horizontal line
(right to left)
a “V”
10
The keyboard display appears when you need to
enter text.
You need only enter characters in upper case, as
the system automatically converts them to
appropriate characters. You can enter special
characters when necessary.
Candidate/entry field
Number of candidates
ToTo uch
enter an alphabetical
character
enter a special
character
enter a number“123” to switch to the
enter a space
delete a character
select a candidate or the candidate in
show the candidate
list*
* The candidate list automatically appears when
candidates are narrowed down as you continue
inputting characters.
the desired character key
“ÂÄÁ” to switch to the
special character
keyboard, then the
desired character; and
“ABC” to switch back
numeric keyboard, then
the desired number key;
and “ABC” to switch
back
the list
“List”
Route Searching
The system searches for routes automatically
after setting the destination.
Before starting, check that GPS signals are
sufficient for navigation (page 9).
Setting the destination and
starting guidance
The procedure for searching for the route and
starting route guidance is explained.
As an example, setting the destination by the
address is introduced here.
For details on setting the destination in other
ways, see “Setting the destination in other ways”
on page 11.
1 Show the top menu.
In the map display, touch the map.
In the menu display, touch VOICE/POS., then
touch the map.
2 Select “Navigate.”
3 Select “Address Input,” then input the
address details.
Input the items in the order below, and touch
or the candidate in the list to proceed.
For details on how to input characters, see
“Keyboard operation” on page 10.
1 “Country”
2 “Town / Postal Code”
If it is possible to pinpoint the destination
by the selected postal code*
confirmation display appears. Select
“Calculate Route.”
3 “Street / Destination”
4 “No.” or “Intersection”*
The address confirmation display appears.
*1 Available only in the UK and Netherlands.
*2 Selectable only if existent in the selected
street.
4 Select “Calculate Route.”
The route is calculated, and route guidance
starts.
1
, the address
2
Setting the destination in other
ways
You can also set the destination and search for
routes by the following methods.
From the top menu, select the items in the
following order, then “Calculate Route” (if
necessary).
For details, see the supplied PDF manual.
Search Nearby
Searches for routes to a POI, such as restaurant,
hotel, etc., near the current car position.
Select “Search Nearby,” then any of the
following options.
“Quick Link 1 - 3”
Searches for routes to the nearest POI of the
category stored on Quick Links. Categories on
Quick Links can be customized in the setting
menu.
“Search by Name”
Enter the name of the POI directly.
“Search by Category”
Select the desired POI category from the list.
Go Home
Searches for routes to your home when it is
registered.
Navigate
Select “Navigate,” then any of the following
options.
“POI Search Nationwide”
Set a wide search area but with limited search
categories. Suitable when searching big
landmarks such as an airport.
“POI Search Town”
Set a narrow search area but all categories
become the target of the search. Suitable when
searching small places such as a petrol station
and restaurant.
“Address Book”
Searches for routes to a saved destination point.
“Recent Destinations”
Searches for routes to recently searched
destinations.
11
Guidance displays
43
67
1AB C
DEGF5
2
H
I
J K
Once a route has been calculated, visual
guidance navigates you to the destination along
with voice guidance.
Information on map tool menu
VIEW
Map display
Straight-ahead driving
VOICE/
POS.
1 During route guidance:
To switch to the Dynamic Route Information
display.
2 To switch to the call in progress display.*
3 To view detailed TMC information.*2*
4 To adjust the volume.
5 During route guidance:
To hear the next voice guidance.
In map scrolling mode:
To switch to the current car position display.
6 To show option menu.
7 To switch to map scrolling mode.
*1 NV-U93T/U83 only.
Appears only during a call in the map display.
*2 NV-U93T/U73T only.
Appears only when the found route is congested.
*3 iTMC (UK) and v-trafic (France) are optional.
To subscribe the service(s), please visit our
website. http://www.navu.sony-europe.com
Approaching an intersection
1
3
A Current time/GPS status/Battery condition/
TMC status*
1
/Bluetooth status*
2
For details, see the supplied PDF manual.
B Distance/ETA (Estimated Time of Arrival) to
destination
C Current position
D Distance to next turn
E Current street name
F Next street name
G North indicator
H Current direction/Current speed
I Instruction after next
J Bar indicator of the distance to next turn
K Next turn instruction
*1 NV-U93T/U73T only.
*2 NV-U93T/U83 only.
12
Dynamic Route Information
This display shows the distance to the
destination, POI information, etc.
Bluetooth function
(NV-U93T/U83 only)
Activating the Bluetooth
function
1 Touch “Phone” in the top menu.
The Bluetooth function menu appears.
2 Select “Phone Settings.”
3 Set “Bluetooth Signal” to “On.”
Route display
You can view the entire route to the destination.
To view, from map display, select “Options” c
“Show Route.”
Map scrolling mode
You can switch to map scrolling mode from map
display by touching , whether during route
guidance or not.
In map scrolling mode, the crosshair is displayed
on the map, and you can drag the screen to scroll
the map.
Touch / to adjust map scale.
Drag the desired point to the intersection of the
crosshair, then touch to show the map
scrolling mode menu, where you can set the
point as a destination, etc.
Touch to return to the current car position
display.
System Settings
Various settings related to the system and
memory are configurable.
From the top menu, select “More...” c “Settings”
c the desired category c the desired item to
make each setting.
Pairing and connecting this unit
with a mobile phone
The following operation is required only for the
first time.
Connecting with a mobile phone
from this unit
Check that the mobile phone is set to allow for
searching (discoverable) beforehand.
1 Touch “Phone” in the top menu.
2 Select “Phone Settings” c “Connect
Phone” c “New Registration.”
3 When “Search for Phone” appears,
select “OK.”
The process of searching for a connectable
mobile phone begins, then the detected
mobile phone name(s) appear in a list.
Search time varies depending on the number
of mobile phones.
4 Select the mobile phone to connect.
Pairing starts.
continue to next page t
13
5 Input a passkey*.
Input the same passkey for this unit and the
connecting mobile phone. The passkey can be
either your own selected number or the
number determined by the connecting mobile
phone.
For details, see the manual of the connecting
mobile phone.
6 Touch “OK” to confirm.
“Connected” appears and connection is
complete.
Depending on the model of your mobile
phone, the connection may also require an
operation on the mobile phone.
* Passkey may be called “passcode,” “PIN code,” “PIN
number,” “password,” etc., depending on the mobile
phone.
Making calls
You can make a call from the connected mobile
phone by operating this unit.
1 Touch “Phone” in the top menu.
2 Select “Make a Call” c “Numeric
Input.”
3 Input the phone number.
4 Touch to start the call.
To end calls
Touch “End Call.”
Receiving calls
When receiving a call, the ring tone is output
from the unit’s speaker.
1 When receiving a call, touch “Answer.”
The phone call starts.
The built-in microphone of this unit will pick
up your voice.
Using the Supplied Software
The major functions of the software on the
supplied disc are introduced below.
If you insert the disc into your computer, the
screen appears automatically. Follow the onscreen instructions.
Contents
Install PC Connection Software*
PC connection software (ActiveSync) can be
installed. Be sure to log on as administrator when
installing this software.
Language Manager
Language data for on-screen display and voice
guidance can be added to the unit, and
unnecessary language data can be deleted from
the unit.
Read the Manual
You can read the PDF manual which contains
further information on operations available.
Support Link
Easy access to the Sony navigation support site is
available.
Visit this site for technical support, such as
software updates, FAQs, etc.
Map Manager*
Map data can be copied to the unit or “Memory
Stick” (not supplied) from the supplied disc.
When copying, you may need to delete
unnecessary map data to free up memory space.
*1 Installation is required only for Windows 2000/
Windows XP users.
*2 The Map Manager function can be used only for
the model with the disc containing map data.
2
1
14
Connecting to your computer
Before connecting to your computer, install the
PC connection software on your computer.
• For Windows 2000/Windows XP users:
Install ActiveSync from the supplied disc.
• For Windows Vista users:
Download “Windows Mobile Device Center
6.1” or later from the Microsoft support site, if
not already installed.
1 Connect the unit to your computer
with the USB cable.
Notes when transferring data
During transfer, do not:
– disconnect the USB cable.
– enter unit standby mode, or reset the unit.
– shut down the computer, enter computer standby
mode, or restart the computer.
Additional Information
Precautions
On Bluetooth communication
(NV-U93T/U83 only)
• Bluetooth wireless technology operates within
a range of about 10 m (about 30 ft).
Maximum communication range may vary
depending on obstacles (person, metal, wall,
etc.) or electromagnetic environment.
• When using the Bluetooth function, install the
unit at a place within 60 cm (about 20 in) from
the driver.
• The following conditions may affect the
sensitivity of Bluetooth communication.
– There is an obstacle such as a person, metal,
or wall between this unit and mobile phone.
– A device using 2.4 GHz frequency, such as a
wireless LAN device, cordless telephone, or
microwave oven, is in use near this unit.
• Because Bluetooth devices and wireless LAN
(IEEE802.11b/g) use the same frequency,
microwave interference may occur and
resulting in communication speed
deterioration, noise, or invalid connection if
this unit is used near a wireless LAN device. In
such as case, perform the following.
– Use this unit at least 10 m (about 30 ft) away
from the wireless LAN device.
– If this unit is used within 10 m of a wireless
LAN device, turn off the wireless LAN
device.
– Install this unit and mobile phone as near to
each other as possible.
• Microwaves emitting from a Bluetooth device
may affect the operation of electronic medical
devices. Turn off this unit and the mobile phone
in the following locations, as it may cause an
accident.
– where inflammable gas is present, in a
hospital, train, airplane, or a petrol (gas)
station
– near automatic doors or a fire alarm
continue to next page t
15
• This unit supports security capabilities that
comply with the Bluetooth standard to provide
a secure connection when the Bluetooth
wireless technology is used, but security may
not be enough depending on the setting. Be
careful when communicating using Bluetooth
wireless technology.
• We do not take any responsibility for the
leakage of information during Bluetooth
communication.
• Connection with all mobile phones cannot be
guaranteed.
– A mobile phone featuring Bluetooth function
is required to conform to the Bluetooth
standard specified by Bluetooth SIG, and be
authenticated.
– Even if the connected mobile phone conforms
to the above mentioned Bluetooth standard,
some mobile phones may not be connected or
work correctly, depending on the features or
specifications of the mobile phone.
– While talking on the phone hands-free, noise
may occur, depending on the model of your
mobile phone or communication
environment.
• Depending on the mobile phone to be
connected, it may require some time to start
communication.
Others
• Using the Bluetooth device may not function
on mobile phones, depending on radio wave
conditions and location where the equipment is
being used.
• If you experience discomfort after using the
Bluetooth device, stop using the Bluetooth
device immediately. Should any problem
persist, consult your nearest Sony dealer.
16
About the “Memory Stick”
What is a “Memory Stick”?
“Memory Stick” is a compact-size IC recording
medium with a large capacity. It has been
designed not only for exchanging/sharing digital
data among “Memory Stick” compatible
products, but also for serving as an insertable/
removable external storage medium that can save
data.
Types of “Memory Stick Duo” that
the system can use
With the system, you can use the following types
of “Memory Stick Duo.”*
• “Memory Stick Duo” (Not compatible with
MagicGate)
• “MagicGate Memory Stick Duo”*
• “Memory Stick PRO Duo”*
*1 The system has been demonstrated as operable
with a “Memory Stick Duo” with a capacity of 4 GB
or smaller. However, we do not guarantee the
operations of all the “Memory Stick Duo” media.
*2 “MagicGate Memory Stick Duo” and “Memory Stick
PRO Duo” are equipped with MagicGate functions.
MagicGate is copyright protection, using
encryption technology. Data with MagicGate
protection cannot be played with this unit.
Notes
• This system supports only the reading of data on a
“Memory Stick Duo.” “Memory Stick Duo” formatting
and writing cannot be performed.
• This system does not support parallel high-speed
data transfer.
• Standard-size “Memory Stick” cannot be used in this
system.
• When using a “Memory Stick Duo,” make sure to
check correct insertion direction. Wrong usage may
cause trouble with the system.
• Do not insert “Memory Stick Micro” directly into
“Memory Stick PRO” compliant product without M2*
adapter supplied with the media (or sold separately).
If you attempt to insert it without attaching to the
M2* adapter, it may not be able to be removed.
• Do not place the “Memory Stick Duo,” “Memory Stick
Micro,” or M2* adapter within the reach of a small
child to prevent him from swallowing it by accident.
• Avoid removing the “Memory Stick Duo” from the
system while the system is reading data.
1
2
2
• Data may be damaged in such occasions:
– “Memory Stick Duo” is removed or the system is
turned off during a read operation.
– “Memory Stick Duo” is used in a location subject to
static electricity or electrical noises.
• We recommend that you save backup of the
important data.
• Do not bend, drop or apply strong shock to the
“Memory Stick Duo.”
• Do not disassemble or modify the “Memory Stick
Duo.”
• Do not allow the “Memory Stick Duo” to get wet.
• Do not use or store the “Memory Stick Duo” in a
location that is subject to:
– Extremely high temperature, such as in a car
parked in the sun
– Direct sunlight
– High humidity or places with corrosive substances
Connector
Write-protect
switch
Memo area
• Do not touch the “Memory Stick Duo” connector with
your finger or metallic objects.
• You cannot record, edit or delete data if you slide the
write-protect switch to LOCK.
• When you slide the write-protect switch of the
“Memory Stick Duo,” use a thin-pointed device.
• When you use a “Memory Stick Duo” without the
write-protect switch, be careful not to edit or delete
the data by accident.
• When you write on the memo area of the attached
label, do not write forcefully.
• When you carry or store the “Memory Stick Duo,” put
it in the case supplied with it.
* Abbreviation for “Memory Stick Micro.”
Note on LCD panel
Some stationary blue, red or green dots may
appear on the monitor. These are called “bright
spots,” and can happen with any LCD. The LCD
panel is precision-manufactured with more than
99.99 % of its segments functional. However, it
is possible that a small percentage (typically 0.01
%) of the segments may not light up properly.
This will not, however, interfere with your
viewing.
Maintenance
Cleaning
• Clean the surface of the suction cup with a soft,
wet lint-free cloth if it becomes dirty and
attachment strength weakens.
Be sure to dry the suction cup before
reattaching.
• Clean the display window with a commercially
available cleaning cloth.
Note
If the suction cup leaves a trace on the windscreen,
wipe with water.
Fuse replacement
When replacing the fuse in the car battery
adapter, be sure to use one matching the
amperage rating stated on the original fuse (2.5 A). If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as this
could damage the unit.
17
Notes on unit disposal
Remove the built-in lithium-ion battery when
disposing of the unit, and return the battery to a
recycling location.
The procedure for removing the battery is
explained below.
Note
Never disassemble the unit except when disposing of
it.
1 Press the RESET button to turn off the
unit.
2 Remove the rubber plugs on the rear
of the unit, then the screws using a
screw driver.
NV-U93T/U83
Remove the 2 rubber plugs, then the 4 screws.
3 Remove the rear cover.
NV-U93T/U83
Use a sharp object, such as a flat head driver,
in the places shown in the illustration to
release the catches and open the rear cover.
NV-U73T/U53
Press where shown in the illustration 1 and
2 to release the catches, then open the rear cover with your hands 3.
3
1
2
NV-U73T/U53
Remove the 4 rubber plugs, then the 4 screws.
18
4 Remove the battery.
NV-U93T/U83
Before removing the battery, remove the
screw as shown below.
2
4
3
1
NV-U73T/U53
1
2
5 Insulate the connector terminal by
wrapping with a tape.
Notes on the lithium-ion battery
• Keep the battery out of the reach of children.
• Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.
Specifications
NV-U93T/U83
Main unit
Operating temperature: 5 – 45 ºC (41 – 113 ºF)
Power requirements: DC 5 V
from supplied USB cable or optional AC adapter
Connection terminals:
Cradle connector
DC IN 5V jack
USB jack
Headphone jack
Memory card slot: Memory Stick Duo slot
Speaker: 20 × 40 mm (0.8 × 1.6 in) oval speaker
Consumption current: Max. 1.5 A
Dimensions: Approx. 145 × 87 × 20 mm
(5.7 × 3.4 × 0.8 in)
(w × h × d, protruding parts excluded)
Mass: Approx. 250 g (8.8 oz)
Monitor
System: Transmissive liquid crystal display
Drive system: a-Si TFT active matrix system
Dimensions: 4.8 in (16:9)
Modulation method: FHSS
Compatible Bluetooth Profiles*
HFP (Hands-free Profile)
OPP (Object Push Profile)
*1 The actual range will vary depending on factors
such as obstacles between devices, magnetic
fields around a microwave oven, static electricity,
reception sensitivity, aerial’s performance,
operating system, software application, etc.
*2 Bluetooth standard profiles indicate the purpose of
Bluetooth communication between devices.
1
2
:
continue to next page t
19
Cradle
Operating temperature: 5 – 45 ºC (41 – 113 ºF)
Power requirements: DC 5.2 V
from supplied 12 V/24 V car battery adapter
(negative earth)
Connection terminals:
Unit connector
DC IN 5.2V jack
TMC aerial jack (NV-U93T only)
Reception frequency: 87.5 – 108.0 MHz
(NV-U93T only)
Built-in battery charging time/usage
time
Charging time
With the supplied car battery adapter/optional AC
adapter: Approx. 3 hours (with unit turned on), or
1.5 hours (in standby mode)
With the supplied USB cable:
Approx. 3 hours (in standby mode)
Usage time
Up to 2 hours (depending on usage)
Optional accessories
Car Install Kit: XA-49FM
AC Adapter: XA-AC13
Car Battery Adapter: XA-DC3
TMC Car Cradle: NVA-CU5T
Design and specifications are subject to change
without notice.
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Use of rechargeable lithium ion batteries.
• Corrugated cardboard is used for the packaging
cushions.
• VOC (Volatile Organic Compound)-free vegetable
oil based ink is used for printing the carton.
NV-U73T/U53
Main unit
Operating temperature: 5 – 45 ºC (41 - 113 ºF)
Power requirements: DC 5 – 5.2 V
from supplied USB cable, optional AC adapter, or
supplied 12 V/24 V car battery adapter (negative
earth)
Connection terminals:
DC IN 5-5.2V jack
USB jack
External GPS aerial jack
TMC aerial jack (NV-U73T only)
Reception frequency: 87.5 – 108.0 MHz
(NV-U73T only)
Memory card slot: Memory Stick Duo slot
Speaker: ø30 mm (1.2 in) circular speaker
Consumption current: Max. 1.5 A
Dimensions: Approx. 133 × 79 × 20 mm
(5.2 × 3.1 × 0.8 in)
(w × h × d, protruding parts excluded)
Mass: Approx. 210 g (7.4 oz)
Monitor
System: Transmissive liquid crystal display
Drive system: a-Si TFT active matrix system
Dimensions: 4.3 in (16:9)
adapter: Approx. 2 hours (with unit turned on), or
1 hour (in standby mode)
With the supplied USB cable:
Approx. 2 hours (in standby mode)
Usage time
Up to 2 hours (depending on usage)
Optional accessories
Car Install Kit: XA-49FM
AC Adapter: XA-AC13
Car Battery Adapter: XA-DC3
External GPS Antenna: VCA-42
Design and specifications are subject to change
without notice.
20
• Halogenated flame retardants are not used in the
g
certain printed wiring boards.
• Use of rechargeable lithium ion batteries.
• Corrugated cardboard is used for the packaging
cushions.
• VOC (Volatile Organic Compound)-free vegetable
oil based ink is used for printin
the carton.
Troubleshooting
The following checklist will help you remedy
problems you may encounter with your unit.
Before going through the checklist below, check the
connection and operating procedures.
General
The unit does not turn on.
t Charge the built-in battery.
t Check that the car battery adapter is securely
inserted into the cigarette lighter socket.
The built-in battery cannot be charged.
t Turn on the unit, then turn off the unit.
t If the car battery adapter is being used, disconnect
it from the cigarette lighter socket, then reconnect.
t The built-in lithium-ion battery can be charged at
temperatures between 5 – 45 ºC (41 – 113 ºF). The
battery may not be charged if the temperature
inside the unit increases because of direct sunlight
exposure, etc. This is not a malfunction.
t Turn on the computer during USB charge.
Note that the CHG indicator 7/
green in the computer standby mode, even though
the built-in battery is not fully charged.
3 may light up in
GPS signal cannot be received.
Firstly, read the GPS overview (page 6), then check the
GPS status by selecting “More…” in the top menu c
“GPS Status.”
• The system cannot receive GPS signals due to an
obstruction.
t Move your car to a place where signals can be
received clearly.
• There is an obstacle in front of the GPS aerial.
t Install the unit where the signal is not interrupted
by the body of the car, etc.
• GPS signal reception may be poor depending on the
material of the car’s windscreen.
t Use the optional External GPS Antenna VCA-42.
(NV-U73T/U53 only)
The car position on the map does not match
the current road.
The error margin of the signal from the GPS satellites
is too large. A maximum error margin of a few
hundred metres can exist.
Voice guidance cannot be heard.
The volume is set too low.
t Raise the volume (page 12).
The LCD is not displayed normally.
• In high temperatures, the LCD may darken and not
display clearly. In low temperatures, afterimage may
occur on the LCD. These are not malfunctions, and
the LCD will return to normal when the temperature
returns to within the specified operating range.
• The LCD is dark.
t The auto dimmer function may be activated
because its sensor 5 (page 8)/
covered by a hand, etc.
The cradle comes off the attachment surface.
Attachment strength weakens if the surface of the
suction cup or attachment surface becomes dirty.
t Clean the surface of the suction cup and the
attachment surface with a soft, wet lint-free cloth
(page 17).
The demonstration mode starts automatically
even if no operation is performed.
t Turn off the auto demonstration mode by selecting
“More…” in the top menu c “Settings” c “General
Settings” c “Demo Mode.” Then, confirm that
“Demo Mode” is set to off.
4 (page 8) is
continue to next page t
21
Bluetooth function (NV-U93T/U83 only)
The connecting mobile phone cannot detect
this unit.
t Set “Bluetooth Signal” to “On” (page 13).
• While connecting to the mobile phone, this unit
cannot be detected from another mobile phone.
Disconnect the current connection and search for this
unit from another mobile phone.
Bluetooth connection is not possible.
t Perform pairing again.
• Depending on the model of your mobile phone,
searching from this unit may not be possible.
t Search for this unit from the mobile phone.
• Depending on the status of the mobile phone,
searching from this unit may not be possible.
t Search for this unit from the mobile phone.
t Check the pairing and connection procedures in the
manual of the mobile phone, etc., and perform the
operation again.
t Go to the Sony website to verify that the mobile
phone model is one that can be connected to this
unit.
The name of the detected mobile phone does
not appear.
Depending on the status of the mobile phone, it may
not be possible to obtain the name.
The caller’s voice volume is low.
t Adjust the volume by touching +/– in the display.
Echo or noise occurs in phone call
conversations.
• Lower the volume.
• “Noise / Echo Cancellation” is set to “Off.”
t Set “Noise / Echo Cancellation” to “Mode 1” or
“Mode 2.”
• If the ambient noise other than the phone call sound
is loud, try reducing this noise. E.g.: If a window is
open and road noise, etc., is loud, shut the window. If
the air conditioner is loud, lower the air conditioner.
The sound quality of the caller’s voice is poor.
Phone sound quality depends on reception conditions
of mobile phone.
t Move your car to a place where you can enhance
the mobile phone’s signal if the reception is poor.
Some functions do not work.
t Check that the connecting mobile phone supports
the functions in question.
The name of the other party does not appear
when a call is received.
• The other party is not stored in the phone book.
t Store in the phone book.
• The calling phone is not set to send the phone
number.
Pairing failed due to time out.
Depending on the connecting mobile phone, the time
limit for pairing may be short. Try completing the
pairing within the time.
No sound is output from the unit’s speaker
during hands-free call.
t If the sound is output from the mobile phone, set
the mobile phone to output the sound from the
unit’s speaker.
Resetting the unit
If the navigation software freezes, try resetting
the unit.
Press the RESET button, then turn on the unit.
Note
After you reset the unit, it may take time to receive
GPS signals when turning on the unit.
22
Wichtig!
Bitte nehmen Sie sich etwas Zeit, um
den Geräte-Pass vollständig
auszufüllen. Dieser befindet sich auf
der hinteren Umschlagseite dieser
Bedienungsanleitung.
Hinweise zu dieser Anleitung
• In dieser Anleitung zur schnellen
Inbetriebnahme finden Sie Anweisungen zu
den Grundfunktionen der Systeme NVU93T, U83, U73T und U53.
– Bevor Sie das System installieren und
benutzen, lesen Sie bitte diese Anleitung
und das mitgelieferte Dokument „Read
This First“ (Installationsanleitung) genau
durch.
Nähere Erläuterungen finden Sie im
Handbuch (PDF-Format) auf der
mitgelieferten Anwendungs-Disc.
– Für die Abbildungen wurde das Modell
NV-U93T verwendet.
– Welche Funktionen zur Verfügung stehen,
zum Beispiel POSITION plus, Bluetooth
oder TMC, ist je nach Modell
unterschiedlich.
Sehen Sie nach, welche Bezeichnung Ihr
Modell trägt, und achten Sie auf die
Hinweise zu den Unterschieden zwischen
den Modellen in dieser Anleitung.
• Die Abbildungen in dieser Anleitung können
sich von dem eigentlichen Gerät
unterscheiden.
• Bewahren Sie diese Anleitung sowie das
Dokument „Read This First“ zum späteren
Nachschlagen gut auf.
Entsorgung von gebrauchten
elektrischen und elektronischen
Geräten (anzuwenden in den
Ländern der Europäischen Union
und anderen europäischen Ländern
mit einem separaten Sammelsystem
für diese Geräte)
Das Symbol auf dem Produkt oder seiner Verpackung
weist darauf hin, dass dieses Produkt nicht als normaler
Haushaltsabfall zu behandeln ist, sondern an einer
Annahmestelle für das Recycling von elektrischen und
elektronischen Geräten abgegeben werden muss. Durch
Ihren Beitrag zum korrekten Entsorgen dieses Produkts
schützen Sie die Umwelt und die Gesundheit Ihrer
Mitmenschen. Umwelt und Gesundheit werden durch
falsches Entsorgen gefährdet. Materialrecycling hilft, den
Verbrauch von Rohstoffen zu verringern. Weitere
Informationen über das Recycling dieses Produkts
erhalten Sie von Ihrer Gemeinde, den kommunalen
Entsorgungsbetrieben oder dem Geschäft, in dem Sie das
Produkt gekauft haben.
Geeignetes Zubehör: Autobatterieadapter
2
Entsorgung von gebrauchten
Batterien und Akkumulatoren
(anzuwenden in den Ländern der
Europäischen Union und anderen
europäischen Ländern mit einem
separaten Sammelsystem für diese Produkte)
Das Symbol auf der Batterie/Akkumulator oder der
Verpackung weist darauf hin, daß diese nicht als normaler
Haushaltsabfall zu behandeln sind. Durch Ihren Beitrag
zum korrekten Entsorgen dieser Batterien/Akkumulatoren
schützen Sie die Umwelt und die Gesundheit Ihrer
Mitmenschen. Umwelt und Gesundheit werden durch
falsches Entsorgen gefährdet. Materialrecycling hilft, den
Verbrauch von Rohstoffen zu verringern. Bei Produkten
die auf Grund ihrer Sicherheit, der Funktionalität oder als
Sicherung vor Datenverlust eine ständige Verbindung zur
eingebauten Batterie bedürfen, sollte die Batterie nur
durch qualifiziertes Servicepersonal ausgetauscht werden.
Um sicherzustellen, daß die Batterie korrekt entsorgt wird,
geben sie das Produkt zwecks Entsorgung an einer
Annahmestelle für das Recycling von elektrischen und
elektronischen Geräten ab. Für alle anderen Batterien
entnehmen Sie bitte die Batterie entsprechend dem
Kapitel über die sichere Entfernung der Batterie. Geben
Sie die Batterie an einer Annahmestelle für das Recycling
von Batterien/Akkumulatoren ab. Weitere Informationen
über das Recycling dieses Produkts oder der Batterie
erhalten Sie von Ihrer Gemeinde, den kommunalen
Entsorgungsbetrieben oder dem Geschäft, in dem Sie das
Produkt gekauft haben.
NV-U93T/U83
NV-U73T/U53
Der Hersteller dieses Produkts ist Sony
Corporation, 1-7-1 Konan, Minato-ku, Tokio,
108-0075, Japan.
Autorisierter Vertreter für EMV und
Produktsicherheit ist die Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart,
Deutschland. Für Fragen im Zusammenhang mit
Kundendienst oder Garantie wenden Sie sich bitte
an die in den separaten Kundendienst- oder
Garantieunterlagen genannten Adressen.
Achtung
UNTER KEINEN UMSTÄNDEN
ÜBERNIMMT SONY DIE HAFTUNG FÜR
NEBEN-, INDIREKTE ODER
FOLGESCHÄDEN ODER FÜR
IRGENDWELCHE ANDEREN SCHÄDEN,
EINSCHLIESSLICH UND OHNE JEDE
EINSCHRÄNKUNG JEGLICHER HAFTUNG
FÜR ENTGANGENEN GEWINN,
ENTGANGENES EINKOMMEN,
DATENVERLUST, NUTZUNGSAUSFALL
DES PRODUKTS ODER ZUGEHÖRIGER
GERÄTE, AUSFALLZEITEN ODER
ZEITAUFWAND DES BENUTZERS, DIE AUF
DIE VERWENDUNG DIESES PRODUKTS,
DER ZUGEHÖRIGEN HARDWARE UND/
ODER SOFTWARE ZURÜCKGEHEN ODER
IN VERBINDUNG DAMIT AUFTRETEN.
Hiermit erklärt Sony Corp., dass sich die Modelle
NV-U93T/U83 in Übereinstimmung mit den
grundlegenden Anforderungen und den anderen
relevanten Vorschriften der Richtlinie 1999/5/EG
befinden. Weitere Informationen erhältlich unter:
http://www.compliance.sony.de/
Die Verwendung dieses Funkgeräts ist in einem
Umkreis von 20 km um das Zentrum von NyÅlesund, Svalbard (Norwegen), nicht erlaubt.
BITTE LESEN SIE DIESE ANLEITUNG UND
DAS MITGELIEFERTE DOKUMENT „READ
THIS FIRST“ (INSTALLATIONSANLEITUNG)
VOLLSTÄNDIG DURCH, BEVOR SIE DAS
BORDNAVIGATIONSSYSTEM INSTALLIEREN
ODER BEDIENEN. DURCH EINE
FEHLERHAFTE INSTALLATION ODER
BEDIENUNG DIESES GERÄTS KANN ES ZU
UNFÄLLEN MIT VERLETZUNGEN BIS HIN
ZUM TOD KOMMEN.
Verwenden Sie unbedingt den mitgelieferten oder
einen gesondert erhältlichen Autobatterieadapter
bzw. ein Netzteil, das mit dem Gerät/der
Anschlussstation kompatibel ist. Andernfalls
wird das Gerät/die Anschlussstation übermäßiger
Spannung ausgesetzt und es kann zu
Rauchentwicklung kommen bzw. es besteht
Feuer- und Unfallgefahr.
Einzelheiten zu Sonderzubehör für Ihr Modell
finden Sie unter „Technische Daten“ auf
Seite 22.
Sicherheit
• Beachten Sie unbedingt Folgendes:
– Installieren Sie das Navigationssystem an einer
sicheren Stelle, an der es die Sicht des Fahrers
nicht beeinträchtigt.
– Installieren Sie das Navigationssystem nicht
über einem Airbag.
– Platzieren Sie Kabel und Anschlussstation so,
dass sie beim Fahren nicht hinderlich sind.
– Setzen Sie das Gerät ordnungsgemäß in die
Anschlussstation ein, damit es nicht
herunterfällt.
– Reinigen Sie vor der Montage die Oberfläche
des Saugnapfs und die Befestigungsstelle. Wenn
Sie das Gerät auf dem Armaturenbrett
installieren, reinigen Sie zuvor die Stelle, an der
der Saugnapf angebracht werden soll.
Vergewissern Sie sich nach der Montage, dass
der Saugnapf gut haftet. Andernfalls könnte das
Gerät oder die Anschlussstation herunterfallen.
Wenn diese Hinweise nicht beachtet werden, kann
es beim Fahren zu gefährlichen Situationen
kommen.
• Drücken Sie nicht zu stark auf das Gerät oder die
Anschlussstation, damit sie nicht herunterfallen.
6
• Beachten Sie stets die örtlichen Verkehrsregeln
und -vorschriften.
• Schauen Sie während der Fahrt nicht ständig auf
das Gerät. Dies ist gefährlich, denn Sie könnten
abgelenkt werden und einen Verkehrsunfall
verursachen.
• Wenn Sie das Navigationssystem während der
Fahrt bedienen müssen, halten Sie zuvor
unbedingt an einer sicheren Stelle an.
• Modifizieren Sie das Gerät nicht.
• Zerlegen Sie das Gerät nur, wenn Sie es entsorgen
wollen.
Umgang mit dem System
• Achten Sie darauf, dass keine Fremdkörper in den
Anschluss des Geräts gelangen. Andernfalls kann
es zu Fehlfunktionen kommen.
• Wenn das Gerät nicht verwendet wird, schalten
Sie es aus, indem Sie ?/1 (1) drücken bzw. ?/1
(1) verschieben. Nehmen Sie das Gerät von der
Anschlussstation und trennen Sie es vom
Autobatterieadapter. Andernfalls wird der
Autobatterie möglicherweise Strom entzogen.
Beachten Sie Folgendes:
Wenn die Zigarettenanzünderbuchse nicht mit der
Position ACC oder I des Zündschlosses verbunden
ist, wird der eingebaute Akku auch bei
ausgeschalteter Zündung oder Nichtverwendung
des Geräts mit Strom versorgt.
• Schließen Sie ausschließlich mitgelieferte oder
gesondert erhältliche Zubehörteile an.
• Schützen Sie das Gerät vor Feuer oder Wasser.
Andernfalls kann es zu einer Fehlfunktion
kommen.
• Ziehen Sie Kabel immer am Stecker heraus, nie
am Kabel selbst.
• Wenn Sie das Fahrzeug abstellen, lassen Sie das
Gerät nicht im Fahrzeug, damit es nicht gestohlen
oder durch hohe Temperaturen im Wageninneren
beschädigt wird.
• Beachten Sie, dass der eingebaute Akku nur bei
Temperaturen von 5 – 45 ºC geladen werden kann.
• Schützen Sie das Gerät vor hohen Temperaturen.
Andernfalls verringert sich die Kapazität des
eingebauten Akkus oder er lässt sich gar nicht
mehr aufladen.
Das GPS-System
Die GPS-Signale werden von Satelliten ausgestrahlt
und sind deshalb an den folgenden Orten
möglicherweise gar nicht oder nicht einwandfrei zu
empfangen:
• In Tunneln oder Unterführungen
• Unter Autobahnen
• Zwischen hohen Gebäuden
• Zwischen hohen Bäumen mit dichtem Laubwerk
Hinweis
Der GPS-Signalempfang ist je nach Material der
Windschutzscheibe am Fahrzeug unter Umständen
nicht gut.
Das Positionsbestimmungssystem
(POSITION plus)
(nur NV-U93T/U83)
Dieses System ist mit einer Funktion ausgestattet,
mit der der Standort des Fahrzeugs korrekt
angezeigt werden kann, selbst wenn es sich an einer
Stelle befindet, an der das GPS-Signal
vorübergehend gar nicht oder nur schlecht
empfangen werden kann, zum Beispiel in einer
Unterführung. Um diese Funktion einzuschalten,
gehen Sie folgendermaßen vor:
– Setzen Sie das Gerät auf die Anschlussstation.
– Fahren Sie eine Weile in einer Gegend, in der
das GPS-Signal gut zu empfangen ist.
Das Positionsbestimmungssystem ist betriebsbereit,
nachdem Sie eine Zeit lang mit eingeschaltetem
Gerät gefahren sind.
Hinweise
• Die Genauigkeit dieser Funktion kann beeinträchtigt
werden, wenn Sie das Gerät in der Nähe einer
beheizbaren bzw. Wärme abweisenden
Windschutzscheibe installieren.
• Je nach Situation wird die aktuelle Position oder
Fortbewegung des Fahrzeugs unter Umständen
nicht präzise angezeigt. Dies wird jedoch korrigiert,
sobald wieder ein GPS-Signal eingeht.
• Diese Funktion steht nur im Zusammenhang mit der
Routenführung zur Verfügung.
WICHTIGER HINWEIS zur BluetoothFunktion!
(nur NV-U93T/U83)
Sicherer und effizienter Gebrauch
Jegliche Änderungen am Gerät, die ohne die
ausdrückliche Genehmigung von Sony durchgeführt
werden, können die Befugnis des Betreibers zur
Verwendung des Geräts aufheben.
Bitte überprüfen Sie vor dem Gebrauch dieses
Produkts, ob es auf nationaler Ebene Vorschriften
oder Bestimmungen gibt, die die Verwendung von
Bluetooth-Geräten einschränken.
Führen von Fahrzeugen
Erkundigen Sie sich in den Gebieten, in denen Sie
unterwegs sind, nach Gesetzen und Vorschriften
zum Gebrauch von Mobiltelefonen (Handys) und
Freisprecheinrichtungen.
Richten Sie Ihre Aufmerksamkeit beim Fahren
immer uneingeschränkt auf das Verkehrsgeschehen.
Wenn die Verkehrssituation es erfordert, fahren Sie
an den Straßenrand und halten Sie, bevor Sie einen
Anruf tätigen oder entgegennehmen.
Hochfrequenzstrahlung
HF-Signale beeinträchtigen möglicherweise nicht
ordnungsgemäß installierte oder unzureichend
abgeschirmte elektronische Systeme in
Kraftfahrzeugen, wie z. B. elektronische
Kraftstoffeinspritzsysteme, elektronische
Antiblockiersysteme, elektronische
Geschwindigkeitsregelsysteme oder AirbagSysteme. Zur Installation oder Wartung dieses
Geräts wenden Sie sich bitte an den
Fahrzeughersteller oder einen Vertreter des
Herstellers. Eine fehlerhafte Installation oder
Wartung kann gefährlich sein und zum Erlöschen
der für dieses Gerät gültigen Gewährleistung führen.
Wenden Sie sich bitte an den Fahrzeughersteller und
klären Sie ab, ob der Gebrauch von Mobiltelefonen
(Handys) im Fahrzeug die Fahrzeugelektronik in
ihrer Funktionsfähigkeit beeinträchtigen könnte.
Überprüfen Sie regelmäßig, ob alle drahtlosen
Geräte in Ihrem Fahrzeug richtig montiert sind und
ordnungsgemäß funktionieren.
Fortsetzung auf der nächsten Seite t
7
Herstellen einer Verbindung zu anderen
Geräten
Wenn Sie eine Verbindung zu einem anderen Gerät
herstellen, lesen Sie in der dazugehörigen
Bedienungsanleitung bitte die ausführlichen
Sicherheitshinweise.
Notrufe
Diese Bluetooth-Freisprecheinrichtung für das Auto
und das elektronische Gerät, das mit der
Freisprecheinrichtung verbunden ist, arbeiten mit
Radiosignalen, Mobilfunk- und Festnetzen sowie
benutzerprogrammierten Funktionen, bei denen
nicht unter allen Umständen eine Verbindung
garantiert werden kann. Verlassen Sie sich daher bei
wichtigen Mitteilungen (wie z. B. medizinischen
Notfällen) nicht ausschließlich auf elektronische
Geräte.
Wenn Sie Anrufe tätigen oder empfangen wollen,
denken Sie daran, dass die Freisprecheinrichtung
und das elektronische Gerät, das mit der
Freisprecheinrichtung verbunden ist, eingeschaltet
sein müssen und nur in Gebieten mit ausreichender
Mobilfunksignalstärke verwendet werden können.
Notrufe sind unter Umständen nicht bei allen
Mobilfunknetzen möglich oder stehen bei
Verwendung bestimmter Netzwerkdienste und/oder
Telefonfunktionen nicht zur Verfügung.
Weitere Informationen erhalten Sie bei ihrem
lokalen Mobilfunkanbieter.
Die Software
Lesen Sie vor Gebrauch des Systems das Dokument
„END-USER LICENSE AGREEMENT“
(Endbenutzerlizenzvertrag) bitte genau durch.
Lage und Funktion der Teile und
Bedienelemente
Näheres finden Sie auf den angegebenen Seiten.
NV-U93T/U83
a Taste ?/1 (Ein/Bereitschaft) 10
Ein- bzw. Ausschalten des Geräts.
b Eingebautes Mikrofon
Zum Telefonieren mithilfe der BluetoothFunktion.
c Bildschirmtasten 13
d Display/Touchscreen
e Sensor für automatischen Dimmer
Erkennt die Helligkeit des Umgebungslichts
und passt die Helligkeit im Display
automatisch entsprechend an.
f (Bluetooth-Anzeige)
Leuchtet blau, während Bluetooth-Signale
ausgegeben werden.
g Anzeige CHG (Laden des Akkus)
Leuchtet während des Ladevorgangs rot und
wechselt zu grün, wenn der Akku vollständig
geladen ist.
Wenn der Autobatterieadapter bzw. das
Netzteil vom Gerät getrennt wird, erlischt
die Anzeige.
h Anschluss für Anschlussstation
i Taste RESET 25
j Buchse DC IN 5V
Hier können Sie den Autobatterieadapter
oder ein Netzteil* anschließen.
k (USB-Buchse) 17
Hier können Sie über ein USB-Kabel einen
Computer anschließen.
8
Loading...
+ 164 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.