Sony NSX-32GT1,NSX-40GT1,NSX-46GT1,NSX-24GT1 Quick Setup Manual
SONY
Preparation
!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!!!!!!!!!!!!!!!_!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Internet TV
Quick S
up
Guide
In the Box
[] Internet TV (1)
Keypad (1)
Size AA batteries (2)
[] IR Blaster cable (1)
[] AC power cord (1)
(except NSX-24GT1)
[] Table-Top Stand (1)
[] Cable cover (1)
[] Screws (M4 x 10) (3)
(for NSX-24GT1 )
[] Screws (M5 x 16) (3)
(for NSX-32/40/46GT1 )
[] Quick Setup Guide (1)
E3Reference Guide (1)
[] Warranty card (1)
C] End User License
Agreement (1)
Inserting batteries
Not the actual ratio
NSX-24GT1/NSX-32GT1/NSX-40GT1/NSX'46GT1
PLEASE READ END USER LICENSE
AGREEMENT BEFORE USING
THISPRODUCT
Printed in U.S.A.
© 2010 Sony Corporation
4-197-994-13 (1)
IIIIIIIIIIIIIII111111111II
4197994131
÷
AA-size (R6)
Connection
Connect to a network
When using wired connection, connect the TV and a router with
a LAN cable. When using wireless connection, you need to set
the Network Setup in the Initial Setup Wizard (on step 6).
Connect the Cable/Satellite Box
Use one of the connection cables illustrated below. Then, place the IR Blaster near the
remote sensor of the Cable/Satellite Box.
@
43M cabe ....
vd®,:t,J
audo cabe ot
V dec,o_.,_do c_be
$
iilli i /_ i_ ii_
Place the IR Blaster so that the infrared
transmitter points to the remote sensor of
the Cable/Satellite Box For details on the
IR Blaster, see "Help Guide" on the back
side.
:£,
• When connecting the Cable!Satellite Box with an HDMI cable, you can use any HDMI jack on the TV,
• For details of network connection with the Cabb/Satellite Box,
see the operating instructions supplied with the Cable/Satellite Box.
• 'fou can control a Cable/Satellite Box via the Home Network depending on your Cable/Satellite TV provider.
For details, see "Help Guide" on the back side,
Loading...