Sony MZ-E77 User Manual

Portable MiniDisc Player

Operating instructions
XXXXXX (XXXX)

MZ-E77

Sony Corporation © 2000 Printed in Japan

WARNING

To prevent fire or shock
hazard, do not expose
the unit to rain or
moisture.

To avoid electrical
shock, do not open the
cabinet. Refer servicing
to qualified personnel
only.

Caution

The use of optical instruments with this
product will increase eye hazard.

Listening for many hours at maximum
volume may damage your hearings.

CAUTION — LASER RADIATION WHEN

OPEN

DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS

Information

IN NO EVENT SHALL SELLER BE LIABLE
FOR ANY DIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES
RESULTING FROM ANY DEFECTIVE
PRODUCT OR THE USE OF ANY
PRODUCT.

Certain countries may regulate disposal of
the battery used to power this product.
Please consult with your local authority.

“MD WALKMAN” is a trademark of Sony
Corporation.

TM

Welcome!

Welcome to the world of the MiniDisc! Here
are some of the capabilities and features
you’ll discover with the new MiniDisc Player.

• Small body almost the size of a MiniDisc
jacket

Ideal weight and size; fits in your shirt
pocket.

• Personalized sound through Digital

Sound Preset functions

You can store two sets of sound quality
adjustments (made during playback) to
two switches.

• Low power-consumption design enables
extended battery life.

• Simple “One-Touch Eject” function for
easy MiniDisc handling

A single press of the OPEN button causes
the player lid to open and the MiniDisc to
eject.

• Easy-to-operate headphones remote
control with backlit LCD

The LCD displays disc and track
information, playback mode as well as
battery condition. Keep the main unit in
your pocket and operate the MiniDisc
player through the “slim stick” remote
control.

• Shock-resistant memory offsets up to 40
seconds of optical read errors.

3-046-782-11(1)

Playing an MD right
away!

Charge the supplied rechargeable battery, before using it for the first
time. Other choices are a dry battery and house current. For details, see
“Power Sources”.
Stereo or monaural playback is automatically selected, depending on
the sound source.

1

Charge the rechargeable battery.

After about 1.5 hours, charging ends and the lamp on the charger
turns off. (To get maximum performance from battery, continue
charging it for another hour after the lamp turns off.)

2

Insert the rechargeable battery.

compartment as shown in the
illustration.

3

Insert an MD.

1 Press OPEN.

4

Play an MD.

Remote
control

4

1 Connect the headphones to the remote control.

Plug it in firmly all the way.

2 Connect the headphones with the remote control to the i jack.
3 Press > N (or press the control towards N/> or . on the remote

control).

The OPR lamp on the player lights up and the player starts to play the first track.
When using the remote control, a short beep sounds in the headphones.

4 Press VOLUME +/– (or press VOL +/– on the remote control) to adjust the

volume.

The volume indicator appears on the remote control to allow you to check the
volume.

To stop play, press x.

The OPR lamp on the player goes off. The display on the remote control disappears
after a while. When using the remote control, a long beep sounds in the headphones.

A

to a wall outlet

3

.

1

N/
>

lamp

NH-14WM (supplied)

2 Insert the battery.1 Slide open the battery

e

E

2 Insert an MD and press the lid down to

close.

With label facing upward, insert disc in
direction of the arrow.

3

x

4

x

Player

Make sure the + and
– terminals are
correctly oriented.

OPR lamp

i jack

2

To

Pause

Find the
beginning of
the current
track

Find the
beginning of
the previous
tracks

Find the
beginning of
the next track

Go backwards
while
playing*

Go forward
while
playing*

Remove the
MD

If playback does not start

Make sure the player is not locked. For
details, see “To lock the controls
(HOLD)”.

For models supplied with the AC
plug adaptor

If the battery charger does not fit the wall
outlet, use the AC plug adaptor.

Display window while playing
back

For details, see “To know the track name
and time”.

Track name*3 or elapsed time of
the track being played

Track number

Tips

• The OPR lamp on the player lights up on
the player during playback. When you
press x, the lamp goes off.

• The display on the remote control
disappears after a while after you have
pressed x.

Note

Do not press OPEN during playback. If you
do, the lid opens and playback stops.

When using optional headphones

Use headphones with a stereo-miniplug.
You cannot use headphones with a
microplug.

1

*

When you press . or > N on the
player during pause (X), the player
resumes playback.
If you hold down . or > N on the
player (or press and hold the control
towards . or N/> on the remote
control) during pause (X), you can fast
forward/rewind without listening to the
playback sound.

2

*

Once you open the lid, the point to start
playback will change to the beginning of
the first track.

3

*

Appears only with MDs that have been
electronically labeled.

Do this (Beeps in the
headphones)

Press X on the remote
control. (Continuous
short beeps)
Press X on the remote
control again to
resume play.*

Press .once.
Press the control
towards . on the
remote control. (Three
short beeps)

Press . repeatedly.
Press the control
towards . on the
remote control
repeatedly.
(Continuous three
short beeps)

Press > N once.
Press the control
towards N/> on
the remote control.
(Two short beeps)

Hold down ..
Press and hold the

1

control towards .
on the remote control.

Hold down > N.
Press and hold the

1

control towards
N/> on the
remote control.

Press x, and then
press OPEN.*

1

2

BVarious ways of

playback

Bottom side of the player

DIGITAL SOUND PRESET E

AVLS F

HOLD D

Remote control

DISPLAY C
PLAYMODE B
HOLD D

Playing tracks repeatedly

B

You can play tracks repeatedly in three ways
— all repeat, single repeat, and shuffle repeat.

Press PLAYMODE while the player is playing
an MD.
Each time you press PLAYMODE, the play
mode indication changes as follows.

Play mode indication

(none) (normal play)

All the tracks are played once.

m

“F” (all repeat)

All the tracks are played repeatedly.

m

“F1” (single repeat)

A single track is played repeatedly.

m

“F

SHUF

All the tracks are played repeatedly in
random order.

” (shuffle repeat)

b

Tips on playback

To know the track name and time C

Press DISPLAY on the remote control while
the player is playing an MD.
Each time you press DISPLAY, the display
changes as follows.

Elapsed time

b

Track number

Track name

Track number

Disc name

Number of tracks recorded on the MD

Note

Disc and track names appear only with MDs that
have been electronically labeled.

m

m

To lock the controls (HOLD) D

To prevent the buttons from being
accidentally operated when you carry the
player, use this function.

Slide HOLD on the player in the direction of
the . to lock the controls of the unit.
Slide HOLD on the remote control in the
direction of the . to lock the controls of the
remote control.

To adjust the sound quality
(DIGITAL SOUND PRESET) E

You can make adjustments to the sound
quality to suit your taste, and then store
two sets of these adjustments.

1 Slide DIGITAL SOUND PRESET to select

1 or 2.
If you want, you may also listen to MDs
without making any adjustments (i.e., by
using the factory settings).

OFF 1 2
DIGITAL SOUND PRESET

2 During playback, hold down DISPLAY

or PLAYMODE until the following
indicator appears on the remote control.
Press DISPLAY to select bass, and
PLAYMODE to select treble.

When you select bass-setting mode, “B”
appears. When you select treble-setting
mode, “T” appears.

3 Press N/> or . on the remote

repeatedly to adjust the bass or the treble.
Adjust the sound as you listen to it.

Example: While adjusting the bass.
The cursor moves. (Position: –2)

The sound can be adjusted in 8 steps
(–4, –3…±0…+2, +3).

If you hold down PLAYMODE while in
bass-setting mode, the mode will change
to treble-setting mode. If you hold down
DISPLAY while in treble-setting mode,
the mode will change to bass-setting
mode.

–4 ±0 +3

4 Press DISPLAY or PLAYMODE.

The sound settings are saved and the
playback display appears again.
If you perform no sound adjustments for
a given duration of time, the playback
display appears again and any settings
that were made are saved.

Returning the MD player to its factory
settings

To return the MD player to its factory settings,
reset the following items to the value indicated:

• DIGITAL SOUND PRESET 1:
bass +1, treble ±0

• DIGITAL SOUND PRESET 2:
bass +3, treble ±0

Notes

• Settings can also be changed while playback is
momentarily paused (X).

• Settings cannot be changed through the
operation buttons on the player.

• Settings cannot be changed while the DIGITAL
SOUND PRESET switch is set to OFF.

To protect your hearing (AVLS) F

The AVLS (Automatic Volume Limiter
System) function keeps down the maximum
volume to protect your ears.

Set AVLS to LIMIT.
The volume is kept at a moderate level, even
if you try to turn the volume above the
limited level.

NORM LIMIT

B Power sources

You can use the player on a dry battery,
house current, or a Ni-MH rechargeable
battery.

Using on a dry battery G

1 Insert one LR6 (size AA) alkaline battery

(not supplied) into the supplied battery
case, and close the lid.

Make sure the + and – terminals

are correctly oriented.

2 Attach the battery case to the player.

Turn towards LOCK.

To release the battery case,
turn towards RELEASE.

When to replace or charge the batteries

You can check the battery condition with the
battery indication which is displayed while using
the player.

t Battery power decreasing

v

r Weak batteries.

v

e The batteries have gone out. “LOW

BATT” flashes in the display on the
remote control, and the power goes off.

Battery life*

Batteries

Ni-MH
rechargeable battery
(NH-14WM)

One LR6 (size AA)
alkaline battery

One LR6 (size AA)
alkaline battery
and a Ni-MH
rechargeable
battery
(NH-14WM)

* The battery life may be shorter depending on

operating conditions and the temperature of
the location.

** With a fully charged battery

Playback

Approx. 21 hours**

Approx. 31 hours

Approx. 56 hours**

Using on house current H

Remove the rechargeable battery when using
the player on house current.

1 Attach the supplied battery case to the

player.

2 Connect the AC-E15L AC power adaptor

(not supplied) to the DC IN 1.5V jack of
the battery case.

3 Connect the AC power adaptor to a wall

outlet.

to a wall outlet

to DC IN 1.5V jack

Note

The battery indication is displayed while using
the AC power adaptor.

BAdditional information

Precautions

On safety

Do not put any foreign objects in the DC IN

1.5V jack.

On power sources

• For use in your house: Use the AC power
adaptor AC-E15L (not supplied). Do not
use any other AC power adaptor since it
may cause the player to malfunction.

Polarity of the plug

• If you are not going to use this player for a
long time, be sure to disconnect the power
supply (AC power adaptor, dry battery, or
rechargeable battery). To remove the AC
power adaptor from the wall outlet, grasp
the adaptor plug itself; never pull the cord.

On charging

• Be sure to use the supplied battery charger.

• Charging time may vary depending on the
battery condition.

• When you use the battery for the first time
or after a long period of disuse, the battery
life may be shorter. In this case, charge
and discharge the battery several times.
The battery life will be restored.

• If the rechargeable battery capacity
becomes half the normal life, replace it
with a new one.

• Remove the rechargeable battery when the
unit is not to be used for a long time. Do
not carry the rechargeable battery in your
pocket or a bag, etc., with metallic objects
such as key rings.

On the battery case attachment
terminals on the main unit

• Do not short-circuit the battery case
attachment terminals on the main unit with
metallic objects, etc., when the
rechargeable battery is inserted, as this
may cause heat and can be dangerous.

• When carrying the player in a bag, be sure
to put it in the supplied carrying pouch.

On heat build-up

Heat may build up in the player if it is used
for an extended period of time. In this case,
leave the player to cool down.

On installation

• Never use the player where it will be
subjected to extremes of light, temperature,
moisture or vibration.

• Never wrap the player in anything when it
is being used with the AC power adaptor.
Heat build-up in the player may cause
malfunction or injury.

On the headphones

Road safety

Do not use headphones while driving,
cycling, or operating any motorized vehicle. It
may create a traffic hazard and is illegal in
many areas. It can also be potentially
dangerous to play your player at high volume
while walking, especially at pedestrian
crossings. You should exercise extreme
caution or discontinue use in potentially
hazardous situations.

Preventing hearing damage

Avoid using headphones at high volume.
Hearing experts advise against continuous,
loud and extended play. If you experience a
ringing in your ears, reduce the volume or
discontinue use.

Caring for others

Keep the volume at a moderate level. This
will allow you to hear outside sounds and to
be considerate of the people around you.

On the MiniDisc cartridge

• Do not touch the internal disc directly.
Forcing the shutter open may damage the
internal disc.

• Do not place the cartridge where it will be
subjected to light, temperature, moisture or
dust.

On cleaning

• Clean the player casing with a soft cloth
slightly moistened with water or a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder or solvent
such as alcohol or benzene as it may mar
the finish of the casing.

• Wipe the disc cartridge with a dry cloth to
remove dirt.

• Dust on the lens may prevent the unit from
operating properly. Be sure to close the
disc compartment lid after inserting or
ejecting an MD.

On dry batteries and the battery
carrying case

Incorrect battery usage may lead to leakage of
battery fluid or bursting batteries. To prevent
such accidents, observe the following
precautions:

• Install batteries with the + and – poles
aligned correctly.

• Do not try to recharge dry batteries.

• When the player is not to be used for a long
time, be sure to remove the batteries.

• If a battery leak should develop, carefully
and thoroughly wipe away battery fluid
from the battery compartment before
inserting new ones.

• Do not carry the dry battery in your pocket
or a bag, etc., with metallic objects such as
key rings. The terminals of the battery or
the battery carrying case may heat up from
a short-circuit and can be dangerous.

On mechanical noise

The player gives out mechanical noise while
operating, which is caused by the power­saving system of the player. This is not a
malfunction.

If you have any questions or problems
concerning your player, please consult your
nearest Sony dealer.

Troubleshooting

Should any problem persist after you have
made these checks, consult your nearest Sony
dealer.

The player does not work or works
poorly.

•You tried to play with no disc in the
player (“NO DISC” flashes on the
remote control).

b

Insert an MD.

•The hold function is activated and the
controls are locked. (If you press any of
the operation buttons on the player,
“HOLD” flashes on the remote control.)

b

Slide HOLD against the direction of
the arrow to release the hold
function.

•Moisture has condensed inside the
player.

b

Take the MD out and leave the
player’s lid open for several hours
until the moisture evaporates.

•The rechargeable battery or dry battery
is weak (“LOW BATT” flashes on the
remote control).

b

Replace the dry battery or recharge
the battery.

•The rechargeable battery or dry battery
has been installed incorrectly.

b

Install the battery with correct
polarity.

•An MD with no recording on it is
inserted (“BLANKDISC” flashes on the
remote control).

b

Insert a recorded MD.

•The player cannot read the disc (it’s
scratched or dirty) (“DISC ERR” flashes
on the remote control).

b

Reinsert or replace the disc.

•While operating, the player received a
mechanical shock, too much static,
abnormal power voltage caused by
lightning etc.

b

Restart as follows.

1 Disconnect all the power sources.
2 Leave the player for about

30 seconds.

3 Connect the power source.

The MD is not played normally.

•The player is set to the repeat mode
(“F” is displayed on the remote
control).

b

Press PLAYMODE repeatedly until
“F” disappears, then start
playing.

An MD is not played from the first track.

•Disc playing stopped before it came to
the last track.

b

Press . repeatedly or eject and
reinsert the MD once to go back to
the beginning of the disc, and restart
playing after checking the track
number in the display.

The Digital Sound Preset function does
not function.

•The DIGITAL SOUND PRESET switch
is set to OFF.

b

Set the switch to 1 or 2.

Playback sound skips.

•The player is placed where it receives
continuous vibration.

b

Put the player on a stable place.

•A very short track may cause sound to
skip.

Sound has a lot of static.

•Strong magnetism from a television or
such device is interfering with
operation.

b

Move the player away from the
source of strong magnetism.

The rechargeable battery does not start
charging (in case of a charger with a lid).

•The lid of the battery charger is not
closed properly.

b

Close the lid and slide the lock.

No sound comes through the
headphones.

•The headphones plug is not firmly
connected.

b

Connect the headphones plug firmly
to the remote control.

b

Connect the headphones plug firmly
to the i jack.

•Volume is too low.

b

Adjust the volume by pressing
VOLUME +/– (VOL +/– on the
remote control).

•AVLS is on.

b

Slide AVLS to NORM.

Specifications

System

Audio playing system

MiniDisc digital audio system

Laser diode properties

Material: GaAlAs
Wavelength: λ = 790 nm
Emission duration: continuous
Laser output: less than 44.6 µW*
* This output is the value measured at a distance

of 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.

Revolutions

600 rpm to 2250 rpm

Error correction

Advanced Cross Interleave Reed Solomon Code
(ACIRC)

Sampling frequency

44.1 kHz

Coding

Adaptive TRansform Acoustic Coding (ATRAC)

Modulation system

EFM (Eight to Fourteen Modulation)

Number of channels

2 stereo channels
1 monaural channel

Frequency response

20 to 20,000 Hz ± 3 dB

Wow and Flutter

Below measurable limit

Outputs

Headphones: stereo mini-jack, maximum output
level 5 mW + 5 mW, load impedance 16 ohms

General

Power requirements

Nickel metal hydride rechargeable battery
NH-14WM (supplied)
One LR6 (size AA) battery (not supplied)
Sony AC Power Adaptor AC-E15L* (not
supplied) connected to the DC IN 1.5V jack

Battery operation time

See “When to replace or charge the batteries”

Dimensions

Approx. 78.3 × 13.9 × 71.4 mm (w/h/d)

1

(3

/8 × 9/16 × 2 7/8 in.) not including projecting

parts and controls

Mass

Approx. 85 g (3.0 oz.) the player only
Approx. 128 g (4.5 oz.) incl. a premastered MD
and a nickel metal hydride rechargeable battery
NH-14WM

Supplied accessories

Battery Charger (1)
Rechargeable battery (1)
Rechargeable battery carrying case (1)
Headphones with a remote control (1)
Dry battery case (1)
Carrying pouch (1)

Optional accessories

AC-E15L AC power adaptor*
MDR-series Stereo headphones**
SRS-series Sony Active Speakers

* The operative voltage for the AC power

adaptor varies depending upon the country in
which it is sold. Therefore, purchase the AC
power adaptor in the country you intend to
use it.

** Whether you should plug the headphones

directly to the i jack on the main unit or to a
remote control, use only headphones with
stereo mini plugs.

stereo mini plugs

Your dealer may not handle some of the above
listed accessories. Please ask the dealer for
detailed information about the accessories in
your country.

US and foreign patents licensed from Dolby
Laboratories Licensing Corporation.

Design and specifications are subject to change
without notice.

English (Traditional Chinese)

As you read, refer to the
illustrations in the English text.

Welcome!

Welcome to the world of the MiniDisc! Here
are some of the capabilities and features
you’ll discover with the new MiniDisc player.

• Small body almost the size of a MiniDisc
jacket

Ideal weight and size; fits in your shirt
pocket.

• Personalized sound through Digital
Sound Preset functions

You can store two sets of sound quality
adjustments (made during playback) to
two switches.

• Low power-consumption design enables
extended battery life.

• Simple “One-Touch Eject” function for
easy MiniDisc handling

A single press of the OPEN button causes
the player lid to open and the MiniDisc to
eject.

• Easy-to-operate headphones remote
control with backlit LCD

The LCD displays disc and track
information, playback mode as well as
battery condition. Keep the main unit in
your pocket and operate the MiniDisc
player through the “slim stick” remote
control.

• Shock-resistant memory offsets up to
40 seconds of optical read errors.

“MD WALKMAN” is a trademark of Sony
Corporation.

BMD playing

Playing an MD! A

Charge the supplied rechargeable battery,
before using it for the first time. Other
choices are a dry battery and house current
(see “Power Sources”).
Stereo or monaural playback is automatically
selected, depending on the sound source.

1 Charge the supplied rechargeable battery

NH-14WM with the supplied battery
charger.

After about 1.5 hours, charging ends and
the lamp on the charger turns off. (To get
maximum performance from battery,
continue charging it for another hour
after the lamp turns off.)
A fully-charged battery should power
consecutive playback for about 21 hours
before you need to recharge it.

2 Open the rechargeable battery

compartment lid and insert the charged
battery.

3 Insert an MD.

1 Press OPEN.
2 Insert the MD with the label side

facing up, and press the lid down to
close.

4 Play the MD.

1 Connect the headphones to the

remote control.

2 Connect the headphones with the

remote control to the i jack on the
player.

3 Press > N (or press the control

towards N/> or . on the
remote control).
The OPR lamp on the player lights up
and the player starts to play the first
track.
When using the remote control, a
short beep sounds in the headphones.

4 Press VOLUME +/– (or press

VOL +/– on the remote control) to
adjust the volume.
The volume indicator appears on the
remote control to allow you to check
the volume.

To stop play, press x.

The OPR lamp on the player goes off.
The display on the remote control disappears
after a while.
When using the remote control, a long beep
sounds in the headphones.

Other disc operation

To

Pause

Find the
beginning of
the current
track

Find the
beginning of
the previous
tracks

Find the
beginning of
the next track

Go backwards
while playing*

Go forward
while playing*

Remove the
MD

* When you press . or > N on the player

during pause (X), the player resumes
playback.
If you hold down . or > N on the
player (or press and hold the control towards
. or N/> on the remote control)
during pause (X), you can fast forward/
rewind without listening to the playback
sound.

** Once you open the lid, the point to start

playback changes to the beginning of the first
track.

If playback does not start

Make sure the player is not locked. See “To
lock the controls (HOLD).”

B

Various ways of playback

Do this (Beeps in the
headphones)

Press X on the remote
control. (Continuous short
beeps)
Press X on the remote
control again to resume
play.*

Press . once.
Press the control towards
. on the remote
control. (Three short
beeps)

Press . repeatedly.
Press the control towards
. on the remote control
repeatedly. (Continuous
three short beeps)

Press > N once.
Press the control towards
N/> on the remote
control. (Two short beeps)

Hold down ..
Press and hold the control
towards . on the
remote control.

Hold down > N.
Press and hold the control
towards N/> on the
remote control.

Press x, and then press
OPEN.**

Playing tracks repeatedly B

Press PLAYMODE on the remote control
while the player is playing an MD.
Each time you press PLAYMODE, the play
mode indication changes as follows:

(none) (normal play)
All the tracks are played once.

B

v

“F” (all repeat)
All the tracks are played repeatedly.

v

“F1” (single repeat)
A single track is played repeatedly.

v

“F SHUF” (shuffle repeat)
All the tracks are played repeatedly in
random order.

Using other functions

To know the track name and time C

Press DISPLAY on the remote control while
the player is playing an MD.
Each time you press DISPLAY, the elapsed
time of the current track and the track
number, the track name and number, and the
disc name and the number of tracks recorded
on the MD appear.

Note

Disc and track names appear only with MDs that
have been electronically labeled.

To lock the controls (HOLD) D

On the player, slide HOLD in the direction of
the . to lock the controls of the player.
On the remote control, slide HOLD in the
direction of the . to lock the controls of the
remote control.

To adjust the sound quality
(DIGITAL SOUND PRESET) E

You can make adjustments to the sound
quality to suit your taste, and then store
two sets of these adjustments.

1 Slide DIGITAL SOUND PRESET to select

1 or 2.
If you want, you may also listen to MDs
without making any adjustments (i.e., by
using the factory settings).

2 During playback, hold down DISPLAY

or PLAYMODE until the following
indicator appears on the remote control.
Press DISPLAY to select bass, and
PLAYMODE to select treble.

3 Press N/> or . on the remote

repeatedly to adjust the bass or the treble.
Adjust the sound as you listen to it.
If you hold down PLAYMODE while in
bass-setting mode, the mode will change
to treble-setting mode. If you hold down
DISPLAY while in treble-setting mode,
the mode will change to bass-setting
mode.
The sound can be adjusted in 8 steps
(–4, –3, ...±0...+2, +3).

4 Press DISPLAY or PLAYMODE.

The sound settings are saved and the
playback display appears again.

Returning the MD player to its factory
settings

To return the MD player to its factory settings,
reset the following items to the value indicated:

• DIGITAL SOUND PRESET 1:
bass +1, treble ±0

• DIGITAL SOUND PRESET 2:
bass +3, treble ±0

Notes

• Settings can also be changed while playback is
momentarily paused (X).

• Settings cannot be changed through the
operation buttons on the player.

• Settings cannot be changed while the
DIGITAL SOUND PRESET switch is set to
OFF.

To protect your hearing (AVLS) F

Set AVLS (Automatic Volume Limiter
System) to LIMIT.
The volume is kept at a moderate level, even
if you try to turn the volume above the
limited level.

BPower Sources

Using on a battery G

Insert one LR6 (size AA) alkaline battery with
correct polarity, and then attach the supplied
battery case to the player.
The battery should power consecutive
playback for about 31 hours before you need
to replace it. If you use both a dry battery
and a rechargeable battery (consecutively),
the total playback time should be about
56 hours.

When to recharge or replace the
battery

When the battery indication changes to r,
the rechargeable battery or the dry battery is
weak. Recharge the rechargeable battery or
replace the dry battery. When the battery is
exhausted, “LOW BATT” flashes in the
display on the remote control and the power
goes off.

Using on house current H

Before using the unit, remove the rechargeble
battery if it is installed.
Attach the supplied battery case and connect
the AC-E15L AC power adaptor (not
supplied) to the DC IN 1.5V jack of the
battery case.
Do not use any other AC power adaptor.

Note

The battery indication mark is displayed while
using the AC power adaptor.