Sony KV-28FQ70U User Manual

The first time the TV set is connected, it is usually turned on. If the TV is off, push in the On/Off switch on the front of the TV

Connect the TV plug to the mains socket (220-240V AC, 50Hz).

Checking the Accessories Supplied

Connecting cables are not supplied.

2 Batteries (AA size)

Connecting the Aerial and VCR

S®

Thank you for purchasing this Sony product.

After following this step by step guide you

will be able to:

Insert Batteries into the Remote Control.

Connect the Aerial and VCR to your TV.

KV-28FQ70U KV-32FQ70U

VCR

OUT IN

Select the language of the menu screens.

Adjust the picture slant.

Tune your TV.

Change the broadcast channels into a different order.

View TV Programmes.

Remote Control RM-938

Inserting Batteries into the Remote Control

• Make sure you insert the supplied batteries using the correct polarities.

• Always remember to dispose of used batteries in an environmental friendly way.

The Scart lead is optional. If you use this optional connection it can improve the picture and sound quality when using a VCR.

If you do not use a SCART lead, after automatically tuning the TV refer to the “Manual Programme Preset” option on page 15 step a) of the instruction manual, to tune in the TV to the output of your VCR. Also refer to your VCR instruction manual to find out how to find the output channel of your VCR.

Switching on the TV

Quick Start Guide

FD Trinitron

Colour Television

Ecological Paper - Totally Chlorine Free

4-093-903-01 (1)

Language

English Norge Français Italiano Nederlands

Select Language: Confirm: OK

If no channels were found during the auto tuning process then a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (see step 3) and press OK . The auto tuning process will start again.

When the automatic tuning is finished, the Programme Sorting menu appears on the screen.

Changing the Programme Order of the broadcast channels

By following the instrutions below, you can rearrange the order in which broadcast channels appear on the screen.

Automatically Tuning the TV

You need to tune the TV to receive channels. By following the instructions below, this TV automatically searches and stores all available broadcast channels for you.

Your television stations are now stored in your television’s memory.

If picture slants, please

adjust picture rotation

Not necessary

Adjust now

Select: Confirm: OK

If picture slants, please

adjust picture rotation

Not necessary

Adjust now

Select: Confirm: O K

Do you want to start

automatic tuning?

Ye s

Programme: Channel:

Searching...

C 01

Auto Tuning

No channel found

Please connect aerial

Confirm

Programme Sorting

Programme: 01 TVE2 02 TVE 03 ANT3 04 TELE5 05 C+ 06 C44

Select Channel: Confirm:

Press the OK button on the remote control to select Yes .

The TV starts to automatically search and store all available broadcast channels for you.

This procedure could take some minutes. Please be patient and do not press any buttons while the automatic tuning is in progress. Otherwise automatic tuning will not be completed.

In some countries the TV Broadcaster installs the channels automatically (ACI system). In this case, the TV Broadcaster sends a menu in which you can select your city by pressing the or button and OK to store the channels.

Programme Sorting

Programme: 01 TVE2 02 TVE 03 ANT3 04 TELE5 05 C+ 06 C44

Select Channel: Confirm:

Programme Sorting

Programme: 01 TVE2 41 TVE 02 TVE 03 ANT3 04 TELE5 05 C+ 06 C44

Select new position Move: OK

• Press the MENU button on the remote control to exit and return to the normal TV screen.

Your TV is now ready for use.

• Press the or button on the remote control to select the programme number with the broadcast channel you wish to rearrange, then press the

button.

• Press the or button on the remote control to select the new programme number position for your selected broadcast channel, then press the OK button.

• Repeat all the above steps if you wish to change the order of the other broadcast channels on your TV.

• Press the MENU button on the remote control to exit and return to the normal TV screen.

Your TV is now ready for use.

Selecting the language of the menu screens

This TV set works with menu screens. By following the instructions below, you can select the desired language of the menu screens.

a) If it is not necessary, press OK to

select Not necessary .

b) If it is necessary, press or to

select Adjust now , then press

OK and correct any slant of the picture between –5 and +5 by pressing or . Finally press OK to store.

The automatic tuning menu appears on the TV screen.

Programme Sorting

Programme: 01 TVE2 02 TVE 03 ANT3 04 TELE5 05 C+ 06 C44

Select Channel: Confirm:

Correcting the Picture Slant

Because of the earth’s magnetism, the picture might slant. By following the instructions below, you can correct the picture slant if it is necessary.

If picture slants, please

adjust picture rotation

Not necessary

Adjust now

Select: Confirm: OK

Language

English Norge Français Italiano Nederlands

Select Language: Confirm: OK

The first time that you switch on your TV, the Language menu appears automatically.

Press the or button on the remote control to select the language, then press the OK button on the remote control to confirm your selection.

The Picture Rotation menu appears on the screen.

a) If you wish to keep the broadcast channels in the tuned order:

b) If you wish to store the broadcast channels in a different order: