Sony KLV-48W652D, KLV-40W652D, KLV-32W602D User Manual

Television

Parts and Controls

Operating Instructions

Connecting TV to the Internet

Watching TV

Navigating through Home Menu

Viewing Pictures from Connected Equipment

Additional Information

KLV-48W652D / 40W652D / 32W602D

Table of Contents

Safety Information . . . . . . . . . . . . . . . . . . . . .3

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Parts and Controls

TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Remote Control . . . . . . . . . . . . . . . . . . . . . 7

Connecting TV to the Internet

Setting up the Internet Connection . . . . . 9

Type 1: Secured network with Wi-Fi

Protected Setup™ (WPS) . . . . . . . . . . . . . . . .9

Type 2: Secured network without Wi-Fi

Protected Setup™ (WPS) . . . . . . . . . . . . . . . 10

Type 3: Unsecured network with any type

of wireless LAN router . . . . . . . . . . . . . . . . . 10

Type 4: Wired network set-up. . . . . . . . . . . 10

Preparing a Wired Network . . . . . . . . . . . . . 11

Viewing the Network Status . . . . . . . . . . . . 11

If You Cannot Connect to the Internet . . .11

Watching TV

Changing the Viewing Style . . . . . . . . . . 12

Changing the Wide Mode . . . . . . . . . . . . . . 12

Setting Scene Select. . . . . . . . . . . . . . . . . . . 12

Navigating through Home Menu

All Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Photo Sharing Plus . . . . . . . . . . . . . . . . . . . . 13

Using the TV as a Photo Frame Mode. . . . . 14

Listening to FM Radio. . . . . . . . . . . . . . . . . . 14

Favourites . . . . . . . . . . . . . . . . . . . . . . . . . 14

Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Playback Photo/Music/Video via USB . . . . 15

Home Network . . . . . . . . . . . . . . . . . . . . .16

Connecting to a Home Network . . . . . . . . . 16

Renderer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Display Settings for Media Servers . . . . . . . 16

Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

System Settings . . . . . . . . . . . . . . . . . . . . . . 16

Customer Support . . . . . . . . . . . . . . . . . . . . 22

Viewing Pictures from Connected Equipment

Connection Diagram. . . . . . . . . . . . . . . . 24

Using Audio and Video Equipment. . . . .25

Using Screen mirroring . . . . . . . . . . . . . . .25

Additional Information

Installing the TV to the Wall . . . . . . . . . . 26

Troubleshooting . . . . . . . . . . . . . . . . . . . 30

Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Specifications . . . . . . . . . . . . . . . . . . . . . .33

Introduction

Screw (supplied with the Wall- Mount Bracket)

Wall- Mount Bracket

10 mm - 12 mm

1.5 N·m/1,5 N·m {15 kgf·cm}

Thank you for choosing t his Sony product. Before operating the TV, please read this manual thoroughly and retain i t for future reference.

Note

• Before operating the TV, please read the “Safety Information” (page 3).

• Instructions about “Installing th e TV to the Wall” are included within this TV’s instructions manual.

• Images and illustrations used in Setup Guide and this manual are for reference only and may differ from the actual product.

Location of the identification label

Labels for TV Model No. and Power Supply rating are located on the rear of the TV. Labels for the AC adapter Model No. and Serial No. are located on the bottom of the AC adapter.

Safety Information

WARNING

Batteri es must not be expos ed to excessive heat such as sunshine, fire or the like. Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:  Using cabinets or stands recommended by the manufacturer of

the television set.

 Only using furniture that can safely support the television set.  Ensuring the television set is not overhanging the edge of the

supporting furniture.

 Not placing the television set on tall furniture (for example,

cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.

 Not placing the television set on cloth or other materials that

may be located between the television set and supporting furniture.

 Educating children about the dangers of climbing on furniture

to reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied.

Installation/Set-up

Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electric shock or damage and/or injuries.

Installation

• The TV set should be installed near an easily accessible AC

power outlet (mains soc ket).

• Place the TV set on a stable, level surface to prevent it from

falling over and causing personal injury or property damage.

• Install the TV so that the TV’s Table-Top Stand does not

protrudes out from the TV stand (not supplied). If the Table-Top Stand protrudes out from the TV stand, it may cause TV set to topple over, fall down, and cause personal injury or damage to the TV.

• Only qualified service personnel should carry out wall-mount installations.

• For safety reasons, it is strongly recommended that you use Sony acce ssories, includi ng: Wall-Mount Bracket: SU-WL450

• Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the Wall-Mount Bracket to the TV set. The supplied screws are designed as indicated by illustration when measured from the attaching surface of the Wall-Mount Bracket. The diameter and length of the screws differ depending on the Wall-Mount Bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc.

Tran spo rti ng

• Before transporting the TV set, disconnect all cables.

• Two or three people are needed to transport a large TV set.

• When transporting the TV set by hand, hold it as shown below. Do not put stress on the LCD panel and the frame around the screen.

• When transporting the TV s et, do not subject it to jolts or excessive vibration.

• When transporting the TV set for repairs or when moving, pack it using the original carton and packing material.

Topple prevention

Ventilation

• Never insert anything in the cabinet.

• Leave space around the TV set as shown below.

• It is strongly recommended that you use a Sony Wall-Mount Bracket in order to provide adequate air circulation.

Installed on the wall

30 cm

10 cm

Leave at least this space around the set.

30 cm

10 cm

Leave at least this space around the set.

6 cm

Air circulation is blocked.

Wall Wall

Installed with stand

NOTE ON AC ADAPTER

Warni ng

To reduce the risk of fire or electric shock, do not expose this appara tus to rai n or moisture . To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Do not install this equipment in a confined space, such as a bookshelf or similar unit.

• Please ensure that the AC powe r outlet (mains socket) is installed near the equipment and shall be easily accessible.

• Be sure to use the supplied AC adapter and AC power cord (mains lead). Otherwise it may cause a malfunction.

• Connect the AC adapter to an easily accessible AC power outlet (mains socket).

• Do not coil the AC power cord (mains lead) around the AC adapter. The core wire may be cut and/or it may cause a malfunction of the TV.

• To ensure proper ventilation and prevent the collection of dirt or dust:  Do not lay the TV set flat, install upside down, backwards, or

sideways.

 Do not place the TV set on a shelf, rug, bed or in a closet.  Do not cover the TV set with a cloth, such as curtains, or items

such as newspapers, etc.

 Do not install the TV set as shown below.

AC power cord (mains lead)

Handle the AC power cord (mains lead) and outlet (mains socket) as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries:  The shape of AC power plug (mains plug), which is supplied

with the TV set, varies depending on the region. Be sure to connect the appropriate supplied AC power cord (mains lead) with the plug that fits into the AC power outlet (mains socket).

 Use only Sony supplied AC power cords (mains lead), not those

of other brands.

 Insert the plug fully into the AC power outlet (mains socket).  Operate the TV set on a 100 V – 240 V AC supply only.  When wiring cables, be sure to unplug the AC power cord

(mains lead) for your safety and take care not to catch your feet on the cables.

 Disconnect the AC power cord (mains lead) from the AC power

outlet (mains socket) before working on or moving the TV set.

 Keep the AC power cord (mains lead) away from heat sources.  Unplug the AC power plug (mains plug) and clean it regularly. If

the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire.

Note

• Do not use the supplied AC power cord (mains lead) on any other equipment.

• Do not pinch, bend, or twist the AC power cord (mains lead) excessively. The core conductors may be exposed or broken.

• Do not modify the AC power cord (mains lead).

• Do not put anything heavy on the AC power cord (mains lead).

• Do not pull on the AC power cord (mains lead) itself when disconnecting the AC power cord (mains lead).

• Do not connect too many appliances to the same AC power outlet (mains socket).

• Do not use a poor fitting AC power outlet (mains socket).

• Do not touch the AC adapter with wet hands.

• If you notice an abnormality in the AC adapter, disconnect it from the AC power outlet (mains socket) immediately.

• The set is not disconnected from the AC source as long as it is connected to the AC power outlet (mains so cket), even if the set itself has been turned off.

• As the AC adapter will become warm when it is used for a long time, you may feel hot when touching it by hand.

Prohibited Usage

Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries.

Location:

• Outdoors (in direct sunlight), at the seashore, on a ship or other vessel, inside a vehicle, in medical institutions, unstable locations, near water, rain, moisture or smoke.

• If the TV is placed in the changing room of a public bath or hot spring, the TV may be damaged by airborne sulphur, etc.

• For best picture quality, do not expose the screen to direct illumination or sunlight.

• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may cause moisture condensation. This may cause the TV to show poor picture and/or poor colour. Should this occur, allow moisture to evaporate completely before powering the TV on.

Environment:

 Do not install the TV in places that are hot, humid, or

excessively dusty; where insects may enter; where it might be exposed to mechanical vibration, near flammable objects (candles, etc.). The TV set shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV.

 Do not place the TV in a humid or

dusty space, or in a room with oily smoke or steam (near cooking tables or humidifiers). Fire, electric shock, or warping may result.

 Do not install the TV in places subject to extreme temperature,

such as in direct sunlight, near a radiator or a heating vent. The TV may overheat in such conditions which can cause deformation of the enclosure and/or TV malfunction.

Situation:

• Do not use when your hands are wet, with the cabinet removed, or with attachments not recommended by the manufacturer. Disconnect the TV set from AC power outlet (mains socket) and antenna during lightning storms.

• Do not install the TV so that it sticks out into an open space. Injury or damage from a person or object bumping into the TV may result.

Broken pieces:

• Do not throw anything at the TV set. The screen glass may break by the impact and cause serious injury.

• If the surface of the TV set cracks, do not touch it until you have unplugged the AC power cord (mains lead). Otherwise electric shock may result.

When not in use

• If you will not be using the TV set for several days, the TV set should be disconnected from the AC power (mains) for environmental and safety reaso ns.

• As the TV set is not disconnected from the AC power (mains) when the TV set is just turned off, pull the plug from the AC power outlet (mains socket) to disconnect the TV set completely.

• Some TV sets may have features that require the TV set to be left in standby to work correctly.

For children

• Do not allow children to climb on the TV set.

• Keep small accessories out of the reach of children, so that they are not mistakenly swallowed.

If the following problems occur...

Turn of f the TV set and unplug the AC power cord (mains lead) immediately if any of the following problems occur. Ask your dealer or Sony service centre to have it checked by qualified service personnel.

When:

 AC power cord (mains lead) is damaged.  Poor fitting of AC power outlet (mains socket).  TV set is damaged by being dropped, hit or having something

thrown at it.

 Any liquid or solid object falls through openings in the cabinet.

About LCD TV Temperature

When the LCD TV is used for an extended period, the panel surrounds become warm. You may feel hot when touching there by the hand.

Precautions

Viewing the TV

• View the TV in moderate light, as viewing the TV in poor light or during long period of time, strains your eyes.

• When using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result.

LCD Screen

• Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD screen and is not a malfunction.

• Do not push or scratch the front filter, or place objects on top of this TV set. The image may be uneven or the LCD screen may be damaged.

• If this TV set is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena disappear as the temperature rises.

• Ghosting may occur when still pictures are displayed continuously. It may disappear after a few moments.

• The screen and cabinet get warm when this TV set is in use. This is not a malfunction.

• The LCD screen contains a small amount of liquid crystal. Follow your local ordinances and regulations for disposal.

Handling and cleaning the screen surface/ cabinet of the TV set

Be sure to unplug the AC power cord (mains lead) connected to the TV set from AC power outlet (mains socket) before cleaning. To avoid material degradation or screen coating degradation, observe the following precautions.

• To remove dust from the screen surface/cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution.

• Never spray water or detergent directly on the TV set. It may drip to the bottom of the screen or exterior parts and enter the TV set, and may cause damage to the TV set.

• Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material.

• When adjusting the angle of the TV set, move it slowly so as to prevent the TV set from moving or slipping off from its table stand.

Optional Equipment

Keep optional components or any equipment emitting electromagnetic radiation away from the TV set. Otherwise picture distortion and/or noisy sound may occur.

Wireless Function of the unit

• Do not operate this unit near medical equipment (pacemaker, etc.), as malfunction of the medical equipment may result.

• Although this unit transmits/receives scrambled signals, be careful of unauthorised interception. We cannot be responsible for any trouble as a result.

Caution about handling the remote control

• Observe the correct polarity when inserting batteries.

• Do not use different types of batteries together or mix old and new batteries.

• Dispose of batteries in an environmentally friendly way. Certain regions may regulate the disposal of batteries. Please consult your local authority.

• Handle the remote control with care. Do not drop or step on it, or spill liquid of any kind onto it.

• Do not place the remote control in a location near a heat source, a place subject to direct sunlight, or a damp room.

Disposal of the TV set

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol is on the remote control and AC adapter.

Parts and Controls

 (Power) / + / –

Short press  to turn the TV on. Long press  until the TV turn off.

When the TV is on, Volume

Press + or – button to increase/decrease the volume. You can also press  until notification is displayed. Increases/decreases the volume by pressing the + or – button.

Input

Press  until notification is displayed. Moves the selected input source by pressing + (up) or – (down) button.

Programme

Press  until PROG notification is displayed. Select the programme by pressing + (next) or – (previous) button.

 (Sensors/LED indicator)

• Receives signals from the remote control. Do not put anything over the sensor. Doing so may affect its function.

• Lights up in amber when the [Sleep Timer] or [On Timer] is set (page 20), or the TV is in Photo Frame Mode (page 14).

• Lights up in green when [Power Saving] is set to [Picture Off] (page 22).

• Lights up in green when the TV is turned on.

• Does not light up when the TV is in standby mode.

• Flashes while the remote control is being operated.

Note

• Make sure that the TV is completely turned off before unplugging the AC power cord (mains lead).

• To disconnect the TV from the AC power completely, pull the plug from the mains socket.

• Please wait for a while when perform input selection to change to other input.

Remote Control

The remote control shape, location, availability and function of remote control button may vary depending on your region/country/TV model.

 / (Input select / Text hold)

• Displays and selects the input source.

• In text mode, holds the current page.

 SYNC MENU

Press to display the BRAVIA Sync Menu and then select connected HDMI equipment from [Device Selection]. The following options can be selected from BRAVIA Sync Menu.

Device Control:

Use the [Device Control] to operate equipment that is compatible with BRAVIA Sync Control. Select options from [Home (Menu)], [Options], [Content List] and [Power Off] to operate the equipment.

Speakers:

Select [TV Speakers] or [Audio System] to output the TV’s sound from the TV speakers or connected audio equipment.

TV Control:

Use the [TV Control] menu to operate the TV from the [Home (Menu)] or [Options] menu.

Return to TV:

Select this option to return to TV programme.

 Number buttons

• Select channels. For channel numbers 10 and above, enter the next digit quickly.

• In text mode, enter the three digit page number to select the page.

 (Wide Mode)

Adjusts the screen display. Press repeatedly to select the desired wide mode (page 12).

 Colour buttons

Displays operation guide (when colour buttons are available).

 NETFLIX (Only on limited region/

country/TV model)

Accesses the “NETFLIX” online service.

 / (Info / Text reveal)

• Displays information. Press once to display information about the programme/input you are viewing. Press again to remove the display from the screen.

• In text mode, reveals hidden information (e.g. answers to a quiz).

Parts and Controls

 SLEEP

Press repeatedly until the TV displays the time in minutes ([Off]/[15 min]/[30 min]/ [45 min]/[60 min]/[90 min]/[120 min]) that you want the TV to remain on before shutting off. To cancel the sleep timer, press SLEEP repeatedly until [Off] appears.

 //// (Item select / Enter)

• Select or adjust items.

• Confirm selected items.

 RETURN

• Returns to the previous screen of any displayed menu.

• Stops playback when playing photo/ music/video file.

 HOME

Displays or cancels the menu.

 +/– (Volume)

Adjust the volume.

 AUDIO

Select the sound of multilingual source or dual sound for the programme current being viewed (Depend on programme source).

//////

• Operate media contents on TV and connected BRAVIA Sync-compatible device.

• This key also can be used to operate VOD (Video on demand) service playback. Availability is depend on VOD service.



Replays the scene/briefly fast forwards the scene.

/ (TV standby)

Turns the TV on or switches to standby mode.

 (Text)

In text mode, displays Text broadcast. Each time you press , the display changes cyclically as follows: Tex t  Text over the TV picture (mix mode)  No Text (ex it th e Tex t se r vic e)



Exit Text mode, or switches to a TV display when displaying external input.

 OPTIONS

Displays a list that contains shortcuts to some setting menus. The listed options vary depending on the current input and content.

 (Jump)

Returns to the previous channel or input viewed more than 15 seconds.

 PROG +/–/ /

• Selects the next (+) or previous (–) channel.

• In text mode, selects the next ( ) or previous ( ) page.

 (Mute)

Mutes the sound. Press again to restore the sound.

Hint

•The number 5, , PROG + and AUDIO buttons have

tactile dots. Use the tactile dots as references when operating the TV.

Connecting TV to the Internet

Setting up the Internet Connection

To use the network features of your TV it needs to be connected to the Internet. The set-up procedure differs depending on the type of network and LAN router. Before setting up the Internet connection, be sure to set up a LAN router. Check your wireless LAN environment using the following chart.

Wireless LAN

Secure Wireless LAN? NO

YES m

Do you use a wireless LAN router compatible with Wi-Fi Protected Setup™ (WPS)?

YES m

Typ e 1*

Wired LAN , Type 4

* Type 1 is easier to set up if your router has an

automatic setting button, e.g. Air Station One-Touch Secure System (AOSS). Most of the latest routers have this function. Check your router.

Typ e 1: Follow the configuration for Secured

network with Wi-Fi Protected Setup™ (WPS).

Typ e 2: Follow the configuration for Secured

network without Wi-Fi Protected Setup™ (WPS).

Typ e 3: Follow the configuration for Unsecured

network with any type of wireless LAN router.

Typ e 4: Follow the configuration for Wired

network set-up.

k Typ e 3

NO k Typ e 2

Type 1: Secured network with Wi-Fi Protected Setup™ (WPS)

The WPS standard makes security of a wireless home network as straightforward as pressing the WPS button on the wireless LAN router. Before setting up a wireless LAN, check the location of the WPS button on the router and verify how to use it. For security purpose, [WPS (PIN)] provides a PIN code for your router. PIN code is renewed every time you select [WPS (PIN)].

1 Press HOME, then select [Settings] 

[System Settings]  [Set-up]  [Network]  [Network Set-up].

2 IP Address setting/Proxy server:

– automatic setting: [Set up network connection]  [Easy] – manual setting: [Set up network connection]  [Expert]  [Wired Set-up] or [Wireless Set-up]

3 Select [WPS (Push Button)] for Push

Button method or [WPS (PIN)] for PIN method.

Note

Button name of the WPS may differ depending on the router (e.g. AOSS button).

4 Follow the instructions on the set-up

screen.

Note

• If you use WPS for network set-up, the security settings of the wireless LAN router activate, and any equipment previously connected to the wireless LAN in a non-secure status will be disconnected from the network. In this case, activate the security settings of the disconnected equipment and then reconnect. Or, you can deactivate the security settings of the wireless LAN router, and then connect the equipment to a TV in a non-secure status.

• To use the network with IPv6, select [Settings]  [System Settings]  [Set-up]  [Network]  [IPv6/IPv4 Priority]  [IPv6], then select [Easy] in [Set up network connection].

• When IPv6 is selected, HTTP Proxy cannot be set.

Connecting TV to the Internet

Type 2: Secured network without Wi-Fi Protected Setup™ (WPS)

To set up a wireless LAN, SSID (wireless network name) and security key (WEP or WPA key) will be required. If you do not know them, consult the instruction manual of your router.

1 Press HOME, then select [Settings] 

[System Settings]  [Set-up]  [Network]  [Network Set-up].

2 IP Address setting/Proxy server:

– automatic setting: [Set up network connection]  [Easy] – manual setting: [Set up network connection]  [Expert]  [Wired Set-up] or [Wireless Set-up]

3 Select [Scan], then select a network from

the list of scanned wireless networks.

4 Follow the instructions on the set-up

screen.

Note

• To use the network with IPv6, select [Settings]  [System Settings]  [Set-up]  [Network]  [IPv6/IPv4 Priority]  [IPv6], then select [Easy] in [Set up network connection].

• When IPv6 is selected, HTTP Proxy cannot be set.

• Please make sure your surrounding is secure when you key in your password.

Type 3: Unsecured network with any type of wireless LAN router

To set up a wireless LAN, SSID (wireless network name) will be required.

1 Press HOME, then select [Settings] 

[System Settings]  [Set-up]  [Network]  [Network Set-up].

2 IP Address setting/Proxy server:

– automatic setting: [Set up network connection]  [Easy] – manual setting: [Set up network connection]  [Expert]  [Wired Set-up] or [Wireless Set-up]

3 Select [Scan], then select a network from

the list of scanned wireless networks.

4 Follow the instructions on the set-up

screen.

Note

• Security key (WEP or WPA key) will not be required because you do not need to select any security method in this procedure.

• To use the network with IPv6, select [Settings]  [System Settings]  [Set-up]  [Network]  [IPv6/IPv4 Priority]  [IPv6], then select [Easy] in [Set up network connection].

• When IPv6 is selected, HTTP Proxy cannot be set.

Type 4: Wired network set-up

Enter the respective alphanumeric values for your router if necessary. The items that need to be set (e.g. IP Address, Subnet Mask, DHCP) may differ depending on the Internet service provider or router. For details, refer to the instruction manuals provided by your Internet service provider, or those supplied with the router.

1 Press HOME, then select [Settings] 

[System Settings]  [Set-up]  [Network]  [Network Set-up].

2 IP Address setting/Proxy server:

– automatic setting: [Set up network connection]  [Easy] – manual setting: [Set up network connection]  [Expert]  [Wired Set-up] or [Wireless Set-up]

3 Follow the instructions on the set-up

screen.

[Network Set-up] can also be set from [Auto

Internet

Modem with router functions

Router

Modem

Internet

Start-up] menu.

Note

• Allows automatic configuration of your wired/ wireless network.

When connecting with LAN cable: Wired When connecting with built-in Wireless LAN:

Wireless

When connecting with both of the cables: Wired

• Set to [Easy], sets the IP address automatically. For proxy server is not use.

• To use the network with IPv6, select [Settings]  [System Settings]  [Set-up]  [Network]  [IPv6/IPv4 Priority]  [IPv6], then select [Easy] in [Set up network connection].

• When IPv6 is selected, HTTP Proxy cannot be set.

Preparing a Wired Network

If You Cannot Connect to the Internet

Use the diagnosis to check possible causes for network connection failures, and settings.

1 Press HOME, then select [Settings] 

[System Settings]  [Set-up]  [Network]  [Network Set-up].

2 Select [View Network setting and

status].

3 Select [Check Connection].

This may take several minutes. You cannot cancel the diagnosis after selecting [Check Connection].

Privacy Policy

When you use the following functions to connect to the Internet, certain information will be sent to Sony Corporation’s global servers, which is considered to be personal information, and requires your agreement in order for service providers to use it.

• System software updates by connecting to Sony Corporation’s global servers via the Internet.

• Internet contents or other Internet services from service providers like Youtube.

Connecting TV to the Internet

Note

• For LAN connections, use a Category 7 cable (not supplied).

Viewing the Network Status

You can confirm your network status.

1 Press HOME, then select [Settings] 

[System Settings]  [Set-up]  [Network]  [Network Set-up].

2 Select [View Network setting and

status].

This TV has the setting screens in Auto Start-up or Setting Menu to confirm your agreement to this after you read the detail of the Privacy Policy. If you want to use these functions, please check [Agree] in each setting screen. If [Disagree] is checked, the above two functions are not available. However, even in this case, if [ON] is selected at [Automatic Software Download] in Auto Start-up or Setting Menu, the system software updating is available. You can change this setting by pressing HOME, then select [Settings]  [System Settings]  [Set-up]  [Privacy Policy].

+ 25 hidden pages