Sony KI-W250 User Manual

Wireless Keyboard

for the Sony Internet Terminal

Operating Instructions

3-867-539-22

Microsoft

KI-W250

1999 by Sony Electronics Inc.

Notice

This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures;

□ Reorient or relocate tiie receiving anterma.
□ Increase the separation between the equipment and the receiver.
□ Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

□ Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in

this manual could void your authority to operate this equipment.

Inserting the Batteries

Open the battery compartment and insert two AA batteries (supplied)
matching the + and - on the batteries to the diagram inside the battery

compartment. Then replace the battery compartment lid.

Notes

If the Wireless Keyboard does not operate properly, the batteries may be
weak. When replacing batteries, replace both of them with new ones. For

best results, use alkaline batteries.
Do not mix old batteries with new ones or mix different types of batteries

□

together.

If the electrolyte inside the battery should leak, wipe the contaminated

□

area of the battery compartment with a cloth, and replace the old batteries

with new ones. To prevent the electrolyte from leaking, remove the
batteries when you don't plan to use the Wireless Keyboard for a long
period of time.

Using the Wireless Keyboard

The Wireless Keyboard works as a standard keyboard, and has additional keys
designed to work with the Internet Terminal. You can also program the
Wireless Keyboard to operate your TV. The function of each key is described
below:

Key

POWER (WEB)

POWER (TV)

TV/VIDEO

PIP

PIP Loc

CODE SET

TV/WEBTV

Switch

VIEW

Function

Turn the Internet Terminal on and off.

Turn the TV on and off.

Cycle through the video inputs of your TV.

Open or close a Picture in Picture window
(INT-W250 model only).

Move the location of the Picture in Picture window on the

screen (INT-W250 model only).
Program the Wireless Keyboard to control your TV.

(See "Programming the Wireless Keyboard' on page 5).

Change the device being controlled by your Wireless
Keyboard. Set the switch to TV to control your TV, or to
WEBTV to control your Internet Terminal.

Change views between TV and the Web.

MUTE Turn the TV sound on and off.

VOLUME -/+

Adjust the volume.