Sony KF-50SX200K User Manual

4-087-135-41(1)

Instruction Manual

Инструкции за експлоатация

Návod k obsluze

Kezelési útmutató

Instrukcja obsługi

Инструкция пo эксплyатации

CZ HU

KF-50SX200K

Introduction

Thank you for choosing this Sony “Grand Wega” model. Before operating the TV set, please read this manual thoroughly and retain it for future reference.

• Symbols used in the manual:

• Important information.

• Information on a feature.

1,2...

•

Sequence of instructions.

• Buttons shaded white on the remote control show the buttons you have to press to follow the sequence of instructions.

• Informs you of the result of the instructions.

Table of Contents

Introduction ...................................................................................................................................................................................................................... 3

Safety Information............................................................................................................................................................................................................ 4

Overview

Checking the Accessories Supplied.................................................................................................................................................................. 5

Overview of TV Buttons .................................................................................................................................................................................... 5

Overview of Remote Control Buttons.............................................................................................................................................................. 6

Installation

Inserting Batteries into the Remote Control.................................................................................................................................................... 7

Connecting the Aerial and VCR ....................................................................................................................................................................... 8

Stabilizing the TV set.......................................................................................................................................................................................... 8

First Time Operation

Switching on the TV set and Automatically Tuning ..................................................................................................................................... 9

Menu System

Changing the Screen Format........................................................................................................................................................................... 11

Introducing and Using the Menu System ..................................................................................................................................................... 11

On Screen display Menus Guide....................................................................................................................................................................12

Using the Menu System:

Adjusting the Picture..................................................................................................................................................................................... 13

Adjusting the Sound......................................................................................................................................................................................14

Using the Features menu............................................................................................................................................................................... 16

Manually Tuning the TV............................................................................................................................................................................... 17

Labelling a channel ........................................................................................................................................................................................ 18

Skipping programme positions.................................................................................................................................................................... 19

Using the “Further Programme Preset” function...................................................................................................................................... 20

Inputting your personal ID........................................................................................................................................................................... 21

Using the Demo Mode................................................................................................................................................................................... 22

Adjusting the H Centre picture for an RGB source................................................................................................................................... 23

Labelling and Selecting the screen format of Input Sources.................................................................................................................... 24

Using Multi PIP (Picture In Picture)............................................................................................................................................................ 25

Using PAP (Picture And Picture)................................................................................................................................................................. 25

Teletext NexTView

...................................................................................................................................................................................................................... 26

Optional Connections

Connecting Optional Equipment.................................................................................................................................................................... 30

Using Optional Equipment.............................................................................................................................................................................. 31

Smartlink............................................................................................................................................................................................................ 32

Remote Control of other Sony Equipment.................................................................................................................................................... 32

Additional Information

Remote Control Configuration for VCR/DVD ............................................................................................................................................ 33

Replacing the Lamp.......................................................................................................................................................................................... 34

Optimum Viewing Area .................................................................................................................................................................................. 35

Specifications.....................................................................................................................................................................................................36

Troubleshooting................................................................................................................................................................................................ 37

Safety Information

This set is to operate on a 220-240V AC supply only. Take care not to connect too many appliances to the same power socket as this could result in ﬁre or electric shock.

Do not open the cabinet and the rear cover of the TV. Refer to qualiﬁed service personnel only.

Do not cover the ventilation openings of the TV For ventilation, leave a space of at least 10cm all around the set.

For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. Disconnect from the mains.

For your own safety, do not touch any part of the TV, power lead or aerial lead during lightning storms.

Never place the TV in hot, humid or excessively dusty places. Do not install the TV where it may be exposed to mechanical vibrations.

Never push objects of any kind into the set as this could result in a ﬁre or electric shock. Never spill liquid of any kind on the set. If any liquid or solid object does fall into the cabinet, do not operate the TV. Have it checked immediately by qualiﬁed personnel.

T o prevent ﬁre or shock hazar d, do not expose the TV to rain or moisture.

To prevent ﬁre, keep inﬂammable objects or naked lights (eg candles) away from the TV.

Clean the TV with a soft, lightly dampened cloth. Do not use benzine, thinner or any other chemicals to clean the TV. Do not scratch the TV screen. As a safety precaution, unplug the TV before cleaning it.

Place the TV on a secure stable stand. Do not allow children to climb on to it. Do not place the TV on its side or face up.

Pull out the power lead by the plug. Do not pull on the power lead itself.

Unplug the power lead before moving the TV. Avoid uneven surfaces, quick steps or excessive force. If the set has been dropped or damaged, have it checked immediately by qualiﬁed service personnel.

Additional Safety Information

•When moving the TV set two persons are needed. To prevent damage DO NOT push on the speaker grills on each side of the screen. Do not grasp the front panels to prevent these parts from breaking off. Support the bottom of the screen with one hand while grasping the top part with the other hand.

•Do not block or cover the ventilation opening situated on the bottom rear of the left hand side of the TV set. For ventilation, leave a space of at least 10 cm from the wall.

•If after transporting the TV set, directly from a cold to a warm location, or if the room temperature has changed suddenly, pictures may be blurred or show poor colour over portions of the picture. This is because condensation has formed on the mirrors or lenses inside the TV set. Let the moisture evaporate before using the TV set.

•To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed down from the ceiling.

Safety Information

Take care not to place heavy objects on the power lead as this could result in damage. We recommend you wind any excess lead around the holders provided on the rear of the TV.

Do not cover the ventilation openings of the TV with items such as curtains or newspapers etc.

• This TV set incorporates the latest high-precision LCD technology. Even though the highest standards are applied in manufacture it is still possible that a few black dots or bright points (red, green or blue) may be visible on the screen under certain picture conditions. It is not possible to remove them and this is not a fault condition.

• The screen of this TV set has an anti-reflection screen coating. To avoid screen degradation, follow the advice given below:

• To remove dust from the surface of the screen, wipe with the

supplied cleaning cloth or a soft cloth.

• Clean the screen and cabinet with a soft, damp cloth. Do not use

any abrasive cleaners. As a safety precaution, unplug the TV set before cleaning it.

• Avoid touching the screen, and take care not to scratch the

surface with hard objects.

Overview

Press on the mark , on the front of the TV set to reveal the front connectors.

Checking the Accessories Supplied

Two batteries

(AAA size)

1 Hexagon key2 Brackets

One Remote Control

(RM-905)

Overview of TV Buttons

Headphone jack

S Video Input jack

2 Screws

1 Cleaning cloth

Lamp indicator (see page 34)

On/Off Switch

Standby indicator:

• By pressing the On/ Off button on the Remote Control to turn the TV off, the standby indicator light up in red.

• By pressing the On/ Off on the TV set to turn the TV off, the standby indicator lights up in amber.

Video Input jack

Audio Input jacks

Input source selection button

Volume control buttons

Programme up or down buttons (selects TV channels)

Overview

Overview of Remote Control Buttons

To Temporarily Switch Off:

Muting the Sound:

Press again to restore the sound.

Selecting TV mode:

Multi PIP, Teletext or video input.

Displaying the time:

display on or off (available only when teletext is broadcast).

Displaying On Screen Information:

to display all on-screen indications. Press again to cancel.

Press to mute TV sound.

Press to switch off PAP,

Press to switch the time

Press

Media Selector:

With this remote control you can operate not only this TV but also the main functions of your VCR or DVD. Switch on the device you want to operate and next press this button repeatedly to select the VCR, TV or DVD. A green light will be momentarily lit to indicate the chosen function.

Before the first time you want to control a DVD or VCR by using this remote control, you have to set it up depending on the brand of the device to be used. For more details, refer to chapter “Remote Control Configuration for VCR or DVD” on page 33.

a) PAP (Picture And Picture):

For more details, please refer to the section “Using PAP (Picture And Picture)”.

b) Teletext:

Buttons with green symbols are also used for

teletext operation. For more details, please refer to the section “Teletext” of this manual.

NexTView:

For more details, please refer to the section “NexTView” of this manual.

Joystick: a) If Media Selector is switched to TV:

•When MENU is switched on, use these buttons to operate the menu system. For details refer to “Introducing and Using the Menu System” on page 11.

• When MENU is switched off, press OK to show an overview of all TV channels. Then press or to select the channel and then press button to watch the selected channel.

b) If Media Selector is switched

to VCR or DVD:

Using these buttons you can control the main functions of your VCR or DVD.

Fastext:

Fastext operation. For more details please refer to the “Fastext” chapter in the “Teletext” section of this manual.

Selecting Sound effect:

repeatedly to change the sound effect.

These buttons are also used for

Press this button

Press to temporarily switch off TV (the standby indicator up in red). Press again to switch on TV from standby mode.

After 15-30 minutes without a signal and without any button being pressed, the TV set switches automatically into standby mode.

VCR DVD on/off:

your VCR or DVD on or off.

Selecting Input source:

repeatedly until the input of the desired source appears on the TV screen.

Selecting channels:

If Media Selector is switched to TV or VCR, press this button to select channels. For double-digit programme numbers, enter the second digit within 2.5 seconds.

a) If Media Selector is switched to TV:

b) If Media Selector is switched to VCR:

To select a double-digit programme on a Sony

a) Recording button:

button to record programmes.

b) Resetting to factory set levels:

picture and sound settings to the factory default levels. This will also return the set to the install condition and the “Auto Tuning” menu will appear on the screen. If this is the case refer to the section “Switching on the TV set and automatically Tuning” (step 4) of this manual.

Freezing the picture:

freeze the picture. Press again to return to the normal picture.

Selecting Screen format:

repeteadly to change the format of the screen (for more details, please refer to the section “Changing the Screen format”) of this manual.

Displaying Multi PIP (Picture In Picture):

Press to display Multi PIP mode. Press again to cancel. For more details, please refer to the section “UsingMulti PIP (Picture In Picture)”.

a) Selecting channels:

select the number of the next or previous broadcast channel.

b) Teletext:

teletext operation. For more detail please refer to the section “Teletext” of this manual.

Displaying the menu system:

button to display the menu on the screen. Press again to remove the menu display from the screen.

Selecting Picture mode:

Adjusting TV Volume:

this button to adjust the volume of the TV.

Press

repeatedly to change the picture mode.

on the TV set lights

Press this button to switch

Press this button

Press this button to watch the last channel selected (the last channel watched for at least 5 seconds).

VCR, e.g. 23, press -/- - first and then the buttons 2 and 3.

If Media Selector is switched to VCR, press this

Press, for a minimum of 3 seconds, to return the

Press this button to

Press this button

Press this button to

These buttons are also used for

Press this

Press this button

Overview

Installation

Inserting Batteries into the Remote Control

Always remember to dispose of used batteries in an environmental friendly way.

Make sure you insert the batteries using

the correct polarities.

Installation

The Scart lead is optional, however if you use a Scart lead to connect your VCR it can improve picture and sound quality when using it.

If you do not use a Scart lead, after automatically tuning the TV set, refer to the "Manually Tuning the TV" section of this instruction manual, to tune in the set to the output of your VCR. Also, refer to your VCR instruction manual to find the output channel of your VCR.

Connecting the Aerial and VCR

Connecting cables are not supplied.

OUT IN

VCR

Stabilizing the TV set the set

After setting up, secure the TV set to a wall, etc., using the supplied brackets and screws, for safety purposes.

Mount the two supplied brackets with the screws provided to the upper rear side of the TV set.

Do not block or cover this ventilation opening. For ventilation, leave a space of at least 10 cm from the wall.

Pass a strong cord or a chain through each bracket, and then secure to a wall or a pillar, etc.

Installation

First Time Operation



Language/Country

Language

Country

Select Language: Confirm: OK

4 Italiano

Français Español

English

Deutsch

Dansk

Čeština



Language/Country

Language

Country

Select Language: Confirm: OK

4 Italiano

Français Español

English

Deutsch

Dansk

Čeština



Language/Country

Language

Country

Select Language: Confirm: OK

4 Italiano

Français Español

English

Deutsch

Dansk

Čeština



Language/Country

Language

Country Select Country:

Confirm: OK

Finland

Denmark

Czech Rep.

Bulgaria Belgium

Austria

Off



Do you want to start automatic tuning?

Yes: OK No:

Please confirm that aerial is connected!

Yes: OK No:

1 2 3 4 5

CO2 CO3 CO4 CO7 CO8

Searching...



Switching on the TV set and Automatically Tuning

The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to 1) choose the language of the menu screen, 2) choose the country in which you wish to operate the TV set, 3) search and store all available broadcast

channels and 4) change the order in which the broadcast channels appear on the screen.

However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in the

(Set Up) menu

Connect the TV plug to the mains socket (220-240V AC, 50 Hz). The first time that the TV set is connected, it is usually turned on. If the

TV is off, press the The first time you switch on the TV, the

On/Off

button on your TV set to switch it on.

Language/Country

automatically displayed on the screen.

Push the joystick on the remote control or to select the

language, then press to confirm your selection. From now on all the menus will appear in the selected language.

menu is

Push the joystick or to select the country in which you will

operate the TV set, then press to confirm your selection.

Select "Off" instead of a country if you do not want the broadcast channels stored in the normal channel sequence starting from programme position 1 (i.e. BBC1= programme 1, BBC2= programme 2...).

The Auto Tuning menu appears on the screen in the selected

language, then press the button on the remote control to select

Yes

A new menu appears automatically on the screen asking you to

check that the aerial is connected. Confirm that the aerial is connected

and then press the button to start the automatic tuning.

• The TV starts to automatically search and store all available broadcast channels for you.

• If you have selected the “Off” option in the Country menu and you activate autotuning, the broadcast channels will be stored in the order in which they are received and no sorting will take place.

This procedure could take some minutes. Please, be patient and do not press any buttons while the automatic tuning is in progress, otherwise the automatic tuning will not be completed.

continued...

First Time Operation

After all available broadcast channels are captured and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen.

If you wish to keep the broadcast channels in the tuned order, go to

step 7.

If you wish to store the broadcast channels in a different order:

Push the joystick on the remote control

or to select the programme number with the broadcast channel you wish to rearrange, then push to enter.

Push the joystick or to select the new programme number

for your selected broadcast channel, then press .

The selected broadcast channel now moves to its new programme position and the other broadcast channels move accordingly.

Repeat steps b1) and b2) if you wish to change the order of the other channels.

Press the button to exit and return to the normal TV screen.

Programme Sorting

PROG CH LABEL

TV 5

C03

1

PRO 7

C05

2

EU-SP

C07

3

SWF

C08

4

RTL

C09

5

SAT

C11

6

MDR

C12

7

DDI

C13

8

DSF

C14

9

RTL 2

C15

10

KAB 1

C16

Select Prog: Confirm:

Programme Sorting

PROG CH LABEL

1

TV 5

C03 TV 5

C03

2

PRO 7

C05

3

EU-SP

C07

4

SWF

C08

5

RTL

C09

6

SAT

C11

7

MDR

C12

8

DDI

C13

9

DSF

C14

10

RTL 2

C15

KAB 1

C16

Select Position: Move: OK

The TV set is now ready for use.

First Time Operation

Menu System

Picture Adjustment

Select: Enter Menu:

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Personal

On Off

Normal

Picture Adjustment

Select: Enter Menu:

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Personal

On Off

Normal

Joystick:

Changing the Screen Format

This feature allows you to change the size of the TV picture.

Press the button on the remote control repeatedly to select one of the following formats.

Smart: 4:3: 14:9: Zoom: Wide:

Smart, Zoom

imitation of wide screen effect for 4:3 broadcast. conventional 4:3 picture size, full picture information. compromise between 4:3 and 16:9 picture size. widescreen format for letterbox movies. for 16:9 broadcast, full picture information.

and

14:9 modes

parts of the top and bottom of the screen are cut off. Press or to adjust the position of the image on screen (eg to read subtitles).

Press the button to confirm your selection.

Introducing and Using the Menu System

Your TV set uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system:

Smart

Wide

Zoom

14:9

4:3

Press the button to switch the main menu on.

•To higlight the desired menu or option, push the joystick

or .

•To enter to the selected menu or option, push

•To return to the last menu or option, push .

•To alter settings of your selected option, push / / or .

•To confirm and store your selection, press .

push / / or

press OK

Press the button to remove the menu from the screen.

Menu System

On Screen display Menus Guide

Picture Adjustment

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Select: Enter Menu:

Audio Adjustment

Sound Effect Equaliser Adjustment Virtual Effect Balance Auto Vol. Control Dual Sound Volume Dual Sound

Select: Enter Menu:

Features

Speaker Auto Format Format Correction Sleep Timer Parental Lock AV3 Output

Select: Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

Select NexTView AV Preset

AV Preset

Manual Set Up

Select:

Personal

Enter Menu:

On Off

Normal

Off

Mono

Normal

- - - - - - -

Picture Adjustment

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Select: Enter:

Audio Adjustment

Sound Effect Equaliser Adjustment Virtual Effect Balance Auto Vol. Control Dual Sound Volume Dual Sound

Select: Enter:

Features

Main

On Off Off TV

Speaker

Auto Format Format Correction Sleep Timer Parental Lock AV3 Output

Select: Enter:

Set Up

Auto Tuning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Set Up

Auto Tuning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Personal

Normal

Personal

Mono

Start

- - - - - - -

Start Auto Tuning



- - - - - - -

Enter:

Refer to the section "Adjusting the Picture”

On Off

Refer to the section

Off

"Adjusting the Sound”

Main

Refer to the section

Normal

"Using the features

Off Off

menu”



Do you want to start automatic tuning?

Yes: OK No:

Programme Sorting

PROG CH LABEL

TV 5

C03

1

PRO 7

C05

2

EU-SP

C07

3

SWF

C08

4

RTL

C09

5

SAT

C11

6

MDR

C12

7

DDI

C13

8

DSF

C14

9

RTL 2

C15

10

KAB 1

C16

Select Prog: Confirm:

Refer to the section "Switching on the TV set and Automatically Tuning"

Teletext

Top / Bottom / Full Text Clear Reveal Time Page Page Overview

Select: Enter:

Refer to the section "Teletext"

Set Up

Auto Tuning Programme Sorting Select NexTView AV Preset Manual Set Up

Enter:

Select:

Set Up

Auto Tuning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Enter:

Select:

Set Up

Auto Tuning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Enter:

Select:



- - - - - - -



- - - - - - -



- - - - - - -

Refer to the section “NexTView”

Refer to the section "Labelling and selecting the screen format of Input Sources”

Manual Set Up

Language/Country Manual Programme Preset Further Programme Preset

RGB Set Up

Personal ID Demo

Select: Enter:

Manual Set Up

Language/Country Manual Programme Preset Further Programme Preset

RGB Set Up

Personal ID Demo

Select: Enter:

Manual Set Up

Language/Country Manual Programme Preset Further Programme Preset

RGB Set Up

Personal ID Demo

Select: Enter:

Manual Set Up

Language/Country Manual Programme Preset Further Programme Preset RGB Set Up Personal ID Demo

Select: Enter:

Manual Set Up

Language/Country Manual Programme Preset Further Programme Preset RGB Set Up Personal ID Demo

Select: Enter:

Manual Set Up

Language/Country Manual Programme Preset Further Programme Preset RGB Set Up Personal ID Demo Start

Select: Enter:

- - - - - - -

Refer to the section



"Switching on the TV



set and Automatically Tuning"

Refer to the sections "Manually Tuning the



TV", "Labelling a



channel" and "Skipping programme positions"

Refer to the section



"Using the Further

 

Programme Preset function"

Refer to the section



"Adjusting the H centre



picture for an RGB source"



Refer to the section

 

"Inputting your



personal ID"

Refer to the section



"Using the Demo



Mode"

Menu System

Adjusting the Picture

Although the picture is adjusted at the factory, you can modify it to suit your own taste.

1 Press the button on the remote control to display the menu

on the screen.

2 Push the joystick to enter the Picture Adjustment menu. 3 Push the joystick or to select the item you wish to change,

then push to enter. See the table below for the effect of each menu item:

Picture Mode Live (for live broadcast programmes) Personal (for individual settings) Movie (for films)

Game (for computer games)

Contrast Less More

Brightness* Darker Brighter

Colour* Less More

Sharpness* Softer Sharper

** Reddish Greenish

Hue

Reset Resets picture to the factory preset levels.

AI (Artificial Off: Normal

Intelligence) On: Automatic optimization of contrast level

according to the TV signal

Noise High: High noise reduction.

Reduction Mid: Medium noise reduction.

selected. (This option is not available when viewing an RGB source).

Colour Tone Warm: Gives a warm tint to the picture.

Low: Low noise reduction. Auto: Optimum noise reduction automatically

Off: No noise reduction.

---Normal: Normal.

Cool: Gives a cool tint to the picture.

Picture Adjustment

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Select: Enter Menu:

Picture Adjustment

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Select: Enter:

Picture Mode

Contrast

Noise Reduction

Colour Tone

Personal

Live

Personal

Movie

Game

On

Off

High

Mid Low

Auto

Off

Warm

Normal

Cool

Normal



On Off

* Can only be altered if Personal Picture Mode is selected. ** Only avalaible for NTSC colour signal (e.g: USA video tapes).

4 Push the joystick , , or to alter the selected item, then

press the button to store the new adjustment.

5 Repeat steps 3 and 4 to alter the other items. 6 Press the button to exit and return to the normal TV screen.

Changing the Picture Mode Quickly

You can quickly change the Picture Mode without entering the Picture Control menu screen.

1 Press the button on the remote control repeatedly to directly

access and select your desired picture mode (Live, Personal, Movie, or Game).

2 Press the button to remove the display from the screen.

Picture Mode

Personal

Movie Game

Menu System

Live



Menu System

Adjusting the Sound

Although the sound is adjusted at the factory, you can modify it to suit your own taste.

1 Press the button on the remote control to display the menu

on the screen.

2 Push the joystick to select the symbol, then push to

enter to the Audio Adjustment menu.

3 Push the joystick or to select the item you wish to change,

then push to enter. See the table below for the effect of each menu item:

Sound Effect Personal: No special acoustic effects.

Dolby Dynamic: “BBE High Definition Sound system”**

Equaliser Push to or to select the frequency band you

Adjustment want to alter and push to or to adjust. Finally,

press the

(Only available if “Sound Effect” is set to “Personal”)

Virtual Effect Push to or to change the level of surround sound

effect when listening to a Dolby surround sound broadcast. (Only available when “Sound Effect” is set to “Dolby V”).

Balance Left Right Auto Vol. Off: volume level changes according to the

Control broadcast signal

Dual Sound • For a stereo broadcast:

• For a bilingual broadcast:

Headphones:

Volume Less More

Dual Sound • For a stereo broadcast:

When listening to the TV through the headphones, special sound

effects are disabled.

• For a bilingual broadcast:

* V: Dolby Virtual, simulates the sound

effect of “Dolby Surround Pro Logic”.

intensifies clarity and presence of sound for better intelligibility and musical realism.

Natural: Enhances clarity, detail and presence of sound by using “BBE High Definition Sound system”**.

button to store the new adjustment.

On: volume level of the channels will stay the same independent of the broadcast signal (e.g. in case of advertisement)

Mono Stereo

Mono (for mono channel if available)

A (for channel 1)

B (for channel 2)

Mono Stereo

Mono (for mono channel if available)

A (for channel 1) B (for channel 2)

PAP (only when PAP is switched on)

Picture Adjustment

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Select: Enter Menu:

Audio Adjustment

Sound Effect Equaliser Adjustment Virtual Effect Balance Auto Vol. Control Dual Sound Volume Dual Sound

Select: Enter:

Audio Adjustment

Sound Effect Equaliser Adjustment Virtual Effect Balance Auto Vol. Control Dual Sound Volume Dual Sound

Select Mode: Confirm: OK

Equaliser Adjustment

(Personal)

+ 0 –

120 500 1,5K 5 K 10 K

Sel: Adjust: Confirm:OK

Virtual Effect

Balance

Auto V ol. Control

Dual Sound

Volume

Dual Sound

Personal

Dolby V

Dynamic

Natural

Personal

Mono

Normal

Mono

Off

Off

On Off

A B

B

continued...

Menu System

4 Push the joystick//orto alter the selected item, then

press the button to store the new adjustment.

5 Repeat steps 3 and 4 to alter the other items.

6 Press the button to exit and return to the normal TV screen.

*This TV has been designed to create the “Dolby Surround” sound

effect by simulating the sound of four speakers with two speakers. This sound effect will only operate when the broadcast audio signal is Dolby Surround encoded.

* Manufactured under license from Dolby Laboratories. “Dolby”,

“Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

** The “BBE High Definition Sound system” is manufactured by

Sony Corporation under license from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word “BBE” and BBE Symbol are trademarks of BBE Sound, Inc.

Changing Sound Mode Quickly

You can quickly change Sound mode without entering the Sound Control menu screen.

1 Press the button on the remote control repeatedly to directly

access and select your desired sound mode (Personal, Dolby V,

Dynamic or Natural).

2 Press the button to remove the display from the screen.

Sound Effect

Personal

Dolby V

Dynamic

Natural

Menu System

Using the Features Menu

Using the Features menu you can:

a) Select if you want to listen to the sound from the TV set directly or through an external amplifier. b) Automatically adjust the size of picture. c) Select a time period after which the TV set switches itself into standby mode. d)

Lock the buttons on the TVset. In this way, the TV set only works by using the remote control buttons.

e) Select the source to be output from the Scart connector :3/q3 (SMARTLINK). In this way you can record from this scart connector while watching another source. If your VCR supports Smartlink, this procedure is not necessary.

1 Press the button on the remote control to display the menu

on the screen.

2 Push the joystick to select the symbol, then push to

enter the Features menu.

3 Push the joystick or to select the desired menu item, then

push to enter (see the table below for the effect of each menu item).

4 Push or to select the desired setting and press the button

to store.

5 Press the button to exit and return to the normal TV screen.

Features Effect / Operation

Speaker Main (sound from the TV set)

Auto Format Off: Size of picture is not automatically adjusted.

(only for aerial Normal: Size of picture is automatically adjusted signal) according to the broadcaster information.

size to eliminate any dark areas on the TV picture.

Format Correction

(only if Auto Format is set to “Normal” or “Full”)

Centre In (sound from external amplifier)

Full: The TV set automatically adjusts the picture

Off: 4:3/14:9 is selected. On: Smart mode is selected automatically for

4:3/14:9 broadcast.

Picture Adjustment

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Select: Enter Menu:

Features

Speaker Auto Format

Format Correction Sleep Timer Parental Lock AV3 Output

Select: Enter:

Speaker

Auto Format

Format Correction

Personal

Normal

Main

Centre In

Normal

Normal

Main

Off

Full

Off

Off

On Off Off TV

Sleep Timer

Off 10 min. 20 min.

. 90 min.

• One minute before the TV set switches into standby mode, the time remaining is displayed

on the screen automatically.

•When watching the TV, press the button on the remote control to display the time remaining.

•To return to normal operation from standby mode, press the TV button on the remote

control.

Parental Lock Off (Normal mode)

On (The TV set can only be switched on using the

remote control, the buttons on the TV do not work)

AV3 Output TV (audio/video signal from the aerial)

AV1

(audio/video signal from the Scart connector :1/ 1).

AV2 (audio/video signal from the Scart

connector

2/ 2).

AV3 (audio/video signal from the Scart

connector :3/q3 (SMARTLINK)).

AV4 (audio/video signal from the connector … 4

placed in the front of the TV set).

If you have connected a decoder, please remember to change the AV3 Output back to "TV" for correct unscrambling.

Sleep Timer

Parental Lock

AV3 Output

10 min

Off

AV1 AV2 AV3 AV4

Menu System

Manually Tuning the TV

Use this function to preset channels (TV Broadcast) or a video input source one by one to the programme order of your choice.

1 Press the button on the remote control to display the

menu on the screen.

2 Push the joystick to select the symbol, then push to

enter the Set Up menu.

3 Push the joystick or to select Manual Set Up, then push

to enter.

4 Push the joystick to or to select Manual Programme Preset,

then push to enter.

5 Push the joystick or to select which programme number

you want to preset a channel on (for VCR select programme number "0"), then push twice . The column SYS is highlighted.

6 Push the joystick or to select the system for TV Broadcast

and VCR channel (B/G for western european countries, L for France, I for Great Britain or D/K for eastern european countries) or a external input source (EXT), then push . The column CH is highlighted.

7 Push the joystick or to select the channel tuning, "C" for

terrestrial channels (for TV Broadcast or VCR channel), "S" for cable channels or "F" for direct frequency input then push .

Picture Adjustment

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Select: Enter Menu:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Manual Set Up

Language/Country Manual Programme Preset Further Programme Preset

RGB Set Up

Personal ID Demo

Select: Enter:

Manual Programme Preset

PROG CHSYSSKIP LABEL

1 2

3 4 5 6 7 8 9 10 11

Select: Enter:

Start Auto Tuning

Enter:

B/G

Off

B/G

Off Off Off Off Off Off Off Off Off Off

Start

- - - - - - -

C09 C10

Personal

Normal

- - - - - - -



- - - - - - -

ARD BBC

On Off

 

8 a) If you know the channel number of the TV Broadcast, the VCR

test signal channel or the frequency, press the number buttons to enter the channel number directly. Then press the button to store.

b) If you do not know the channel number, push the joystick

to select SEARCH and the TV set starts to search automatically

for the next available TV Broadcast channel or the channel of the VCR signal. Then press the button to store or push to continue searching for the desired channel.

c) For external input sources (EXT), push to select the input

source to which you have connected your equipment (AV1,

AV2, AV3 or AV4). Then press the button to store.

9 Repeat steps 4 to 8 a), b) or c) if you wish to store more channels. 10 Press the button to exit and return to the normal TV screen.

The TV set is now ready for use.

PROG CHSYS

SKIP LABEL Off

EXT

PROG SYS

SKIP LABEL Off

1 B/G

PROG SYS

SKIP LABEL Off

1 B/G

PROG CHSYS

SKIP LABEL Off

3 EXT

B/G

L I

D/K





C

- S F

03





AV1 AV2 AV3 AV4



Menu System

Labelling a channel

Names for channels (TV Broadcasts) are usually taken automatically from Teletext if available. You can however name a channel or an input video source using up to five characters (letters or numbers). Using this function, you can easily identify which channel (TV Broadcasts) or video source you are watching.

1Press the button on the remote control to display the

menu on the screen.

2Push the joystick to select the symbol, then push to

enter the Set Up menu.

3Push the joystick or to select Manual Set Up, then push

to enter.

4Push the joystick or to select Manual Programme Preset,

then push to enter.

5Push the joystick or to select the programme number with

the channel you wish to name.

6Push the joystick repeatedly until the first element of the

LABEL column is highlighted.

Picture Adjustment

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Select: Enter Menu:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Manual Set Up

Language/Country Manual Programme Preset Further Programme Preset

RGB Set Up

Personal ID Demo

Select: Enter:

Manual Programme Preset

PROG CHSYSSKIP LABEL

1 2

3 4 5 6 7 8 9 10 11

Select: Enter:

PROG SYS

SKIP LABEL Off

1 B/G

Start Auto Tuning

Enter:

B/G

Off

B/G

Off Off Off Off Off Off Off Off Off Off



C 03



Personal

Start

- - - - - - -



- - - - - - -

C09 C10



ARD BBC

Normal

On Off

 

18 Menu System

7Push the joystick or to select a letter, number, "+" or a

blank, then push to confirm this character. Select the other four characters in the same way.

8After selecting all the characters, press the button.

9Repeat steps 5 to 8 if you wish to label other channels.

10Press the button to exit and return to the normal TV

screen.

When you select a named channel, the name will appear for a few seconds.

Menu System

Skipping Programme positions

You can programme this TV set to skip any unused programme numbers when they are selected with the PROG +/- buttons. To cancel this function afterwards, proceed in the same way as described below but by selecting Off instead of On in step 6.

1 Press the button on the remote control to display the menu

on the screen.

2 Push the joystick to select the symbol, then push to

enter the Set Up menu.

3 Push the joystick or to select Manual Set Up, then push to

enter.

4 Push the joystick or to select Manual Programme Preset,

then push to enter.

5 Push the joystick or to select the programme position you

want to skip, then push to enter the SKIP column.

6 Push the joystick to select On, then press the button to

store.

Picture Adjustment

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Select: Enter Menu:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Manual Set Up

Language/Country Manual Programme Preset Further Programme Preset

RGB Set Up

Personal ID Demo

Select: Enter:

Manual Programme Preset

PROG CHSYSSKIP LABEL

1 2

3 4 5 6 7 8 9 10 11

Select: Enter:

PROG SYSSKIP LABEL

1 B/G

Off On

 

Start Auto Tuning

Enter:

B/G

Off

B/G

Off Off Off Off Off Off Off Off Off Off



C 09



Personal

Start

- - - - - - -



- - - - - - -

C09 C10

ARD

ARD BBC

Normal

On Off

 

7 Repeat steps 5 and 6 to skip other unused programme positions.

8 Press the button to exit and return to the normal TV screen.

When changing channels (TV Broadcasts) with the PROG +/- buttons,

the skipped programme positions do not appear. You can, however, still select them using the number buttons.

Menu System

Using the "Further Programme Preset" function

With this feature you can: a) Individually attenuate the strength of a channel signal in case there is a strong local aerial signal (characteristically a striped

picture). b) Individually adjust the volume level of each channel. c) Normally the automatic fine tuning (AFT) will operating, however you can manually fine-tune the TV to obtain better

reception if the picture is distorted.

d) Preset the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way

1 Press the button on the remote control to display the menu

on the screen.

2 Push the joystick to select the symbol, then push to enter the

Set Up menu.

Picture Adjustment

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Select: Enter Menu:

Personal

Normal

On Off

3 Push the joystick or to select Manual Set Up then push to

to enter.

4 Push the joystick or to select Further Programme Preset,

then push to to enter.

5 Push the joystick or to select the relevant programme number,

then push repeatedly to select:

a) ATT (RF attenuator) b) VOL (Volume Offset) c) AFT (Automatic Fine Tuning) or d) DECODER

6 a) ATT

Push the joystick to select On, then press the button. Repeat steps 5 and 6 a) to attenuate other channels.

b)VOL

Push the joystick or to adjust the volume level of the channel over a range of -7 to +7, then press the button. Repeat steps 5 and 6b) to adjust the volume level of the other channels.

c) AFT

Push the joystick or to fine tune the channel frequency over a range of -15 to +15, then press the button. Repeat steps 5 and 6c) if you wish to fine tune other channels.

d)DECODER

Push the joystick or to select AV1 (for a decoder connected to the Scart :1/ 1) or AV3 (for a decoder connected to the

Scart :3/q 3 (SMARTLINK)), then press the button. Repeat steps 5 and 6d) to select the AV1 or AV3 output for other programme positions.

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Manual Set Up

Language/Country Manual Programme Preset Further Programme Preset

RGB Set Up

Personal ID Demo

Select: Enter:

Further Programme Preset

PROG AFTVOLATT DECODER

1 2

3 4 5 6 7 8 9 10 11

Select: Enter:

PROG AFTVOLATT DECODER

1 Off

PROG AFTVOLATT DECODER

1On

PROG AFTVOLATT DECODER

1 On -5

PROG AFTVOLATT DECODER

1 On -5 2

Start Auto Tuning

Enter:

Off

0

Off

0

Off



- 5





On On On

2



Start

- - - - - - -



- - - - - - -

Off Off Off

Off AV1 AV3

 

The picture from the decoder connected to the Scart connector :1/ 1 or :3/q 3 (SMARTLINK) on the back of the set will appear on the selected programme number.

7 Press the button to exit and return to the normal TV screen.

The TV set is now ready for use.

Menu System

Inputting Your Personal ID

You can programme this TV set with a personal code, using up to eleven characters (letters and numbers). By using this function it will be possible to identify your TV set if it is ever stolen.

This code can only be input once! Make sure you make a note of it in this instruction manual.

1 Press the button on the remote control to display the menu

on the screen.

2 Push the joystick to select the symbol, then push to enter the

Set Up menu.

3 Push the joystick or to select Manual Set Up, then push to

enter.

4 Push or to select Personal ID, then push to enter.

5 Push the joystick to or to select a letter, number, + or a blank;

then push to confirm this character. Select the other ten characters in the same way.

Picture Adjustment

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Select: Enter Menu:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Manual Set Up

Language/Country Manual Programme Preset Further Programme Preset RGB Set Up Personal ID Demo

Select: Enter:

Manual Set Up

Language/Country Manual Programme Preset Further Programme Preset

RGB Set Up

Personal ID Demo

Select A-Z, 0-9: Store: OK

Personal

Start

- - - - - - -

Start Auto Tuning



- - - - - - -

Enter:

- - - - - - -

A----------

Normal



On Off

 

6 After selecting all the characters, press the button. A new menu

automatically appears on the screen asking you to be sure that you want to save this ID.

7 a) If you do not wish to store this ID, push the joystick and

repeat steps 4 to 6 to enter a new ID.

b) If you wish to store this ID, press the button.

Remember that this code can only be input once.

8 Press the button to return to the normal TV screen.

When you enter the Manual Set Up menu, in the "Personal ID" option the code you entered above will be displayed. You will not be able to select and change this option.

Are you sure?

Save: OK Cancel:

Menu System

Picture Adjustment

Select: Enter Menu:

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Personal

On Off

Normal

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Start Auto Tuning

Start

- - - - - - -

Enter:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:



- - - - - - -

Manual Set Up

Select: Enter:

Language/Country Manual Programme Preset Further Programme Preset RGB Set Up Personal ID Demo Start

 

- - - - - - -

Using the Demo Mode

This function provides an overview of some of the features available on this TV set.

1 Press the button on the remote control to display the menu

on the screen.

2 Push the joystick to select the symbol, then push to

enter the Set Up menu.

3 Push the joystick or to select Manual Set Up, then push to

enter.

4 Push or to select Demo, then push to enter and start

the demonstration.

The TV set starts the demonstration and shows most of the available picture functions.

Note:

Press the button on the remote control to stop the demonstration and return to the normal TV screen.

Menu System

Adjusting the H Centre picture for an RGB source

When connecting an RGB source, such as a DVD player, to Scart connector :1/ 1 or :2/ 2 you may need to readjust

the H Centre of the picture.

1 Press the button repeatedly on the remote control until the

symbol …1 or …2 appears on the screen.

• …1 symbol for devices connected to the

:1/ 1 Scart

connector.

• …2 symbol for devices connected to the :2/ 2 Scart

connector.

2 Press the button to display the menu on the screen.

3 Push the joystick to select the symbol, then push to

enter the Set Up menu.

4 Push or to select Manual Set Up then push to enter.

… 1

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Picture Adjustment

Select: Enter Menu:

Start

Start Auto Tuning

- - - - - - -

Enter:

Personal

Normal

- - - - - - -



On Off

5 Push the joystick or to select RGB Set Up then push to enter.

6 Push the joystick to enter H Centre, then push or to

adjust the centre of the picture over a range of -10 to +10. Press the button to store.

7 Press the button to exit and return to the normal TV screen.

Manual Set Up

Language/Country Manual Programme Preset Further Programme Preset RGB Set Up Personal ID Demo

Select: Enter:

RGB Set Up

H Centre

Adjust Position: Confirm: OK

RGB Set Up

- - - - - - -

 

Menu System

Labelling and Selecting the screen format of Input Sources

This function enables you to select the size of the picture coming from the input source. It also allows you to assign a name to the optional equipment you have connected to the sockets of this TV set. This name can contain up to 5 characters (letters or numbers).

1 Press the button on the remote control to display the menu

on the screen.

2 Push the joystick to select the symbol, then push to enter the

Set Up menu.

3 Push the joystick or to select AV Preset, then push to enter.

4 Push the joystick or to select the input source. Then push

to enter.

5 Push the joystick or to select:

Off (The size of picture is not automatically adjusted). Normal (The size of picture is automatically adjusted according to

the broadcaster information).

Full (The TV set automatically adjusts the picture size to

eliminate any dark areas on the TV picture (as shown in the section “Changing the Screen Format”).

Picture Adjustment

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Select: Enter Menu:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Select:

AV Preset

INPUT LABEL

AV1 AV2 AV3 AV4

Select: Enter:

AV Preset

INPUT LABEL

AV1 AV2 AV3 AV4

Select: Next: Confirm: OK

AV Preset

Start Auto Tuning

Enter:

AUTO FORMAT

Off Off Normal Full

AUTO FORMAT

Off Off Normal Full

Personal

Normal

Start

- - - - - - -



- - - - - - -

VIDEO  VIDEO VIDEO

VIDEO VIDEO

VIDEO

On Off

Menu System

Next push .

6 With the first element of the LABEL column highlighted, push the

joystick or to select a letter, number, "+" or blank;

then push to confirm this character. Select the other four characters in the same way.

7 After selecting all the characters, press the button.

8 Repeat steps 4 to 7 if you wish to select the picture size or label other

input sources.

9 Press the button to exit and return to the normal TV screen.

Whenever the equipment with the labelled input is selected for use, the name

appears on the screen for a few seconds.

AUTO FORMAT

INPUT LABEL

Off

AV1 AV2 AV3 AV4

Select A-Z, 0-9: Confirm: OK

Off Normal Normal

IDEO V VIDEO VIDEO

Menu System

Using Multi PIP (Picture In Picture)

Multi PIP (Picture in Picture) mode displays a succession of 12 still pictures and a 13th that is live. You can manually select which channel you wish to watch, either full-screen or in the PIP.

03 05

1 Press the button on the remote control to select the PIP mode.

Now 13 programme positions appear on the screen, with the current channel in the centre. The programme displayed at the top left will be highlighted by a frame around it.

2 Push the joystick//orto move within the 13 displayed

channels. You will notice that the framed channel moves to highlight the current selection. Continue until the channel you wish to select is framed.

By pressing PROG -/+, the next or previous 13 programme numbers will appear on the screen.

3 Press the button to select the framed channel. The selected

channel moves to the centre.

01 06

11 09 08

4 Press to return to the normal TV mode.

Using PAP (Picture And Picture)

PAP divides the screen into two for watching two channels simultaneously. One of the pictures can be selected to come from a video source. The sound from the left screen comes through the TV set loudspeakers, the sound from the right screen can be heard via headphones.

Switching PAP on and off

Press the button on the remote control to display the two screens in format 4:3. Press again to switch PAP off.

Selecting PAP source

1 To change the source of the left screen:

With PAP switched on, press the number buttons (to select a TV channel) or press (to select a video source).

2 To change the source of the right screen:

With PAP switched on, press the button on the remote control. When the symbol appears at the bottom of the right screen, press the number buttons (to select a TV channel) or press (to select a video source).

Swapping screens

With PAP switched on, press the button on the remote control to swap the two screens.

Zooming the screens

With PAP switched on, push the joystick repeatedly or to change the size of the two screens.

Selecting the sound of the right screen

You can hear the sound of the right screen via headphones. With PAP switched on, refer to the "Adjusting the Sound" section of this instruction manual and set the option "l Dual Sound" to "PAP".

Menu System

Teletext

Most TV channels broadcast information via Teletext. The index page of the teletext service (usually page 100) gives you information on how to use the service.

! Please use a TV channel with a strong signal, otherwise there may be Teletext errors.

Switching Teletext on and off

1 Select the TV channel which carries the teletext service you want

to view.

2 Press the button once for Picture and Teletext (P&T). The screen

is divided in two, with the TV channel in the right corner and the Teletext display on the left.

P&T mode: Press then press PROG +/- to change the channel of the TV screen. Push the joystick or to change the size of the TV screen then press again to resume normal teletext reception.

3 Press twice to get Teletext only. 4 Press three times for Mix mode. 5 Press a fourth time or press to switch off Teletext.

Selecting a Teletext page

Input three digits for the page number using the numbered buttons on the control. If you make a mistake, type in any three digits then re-enter the correct page number.

Selecting the next or preceding page

Press the (PROG+) or (PROG-) buttons on the remote control to select the previous or next page.

TELETEXT

Index

Programme News Sport Weather

Index

Programme

Programme News

News

News Sport

Sport

Sport Weather

Weather

Index Programme News Sport Weather



TELETEXT



25 153 101



25

153

153 101

101



25 153 101

Selecting a sub page

A teletext page may consist of several sub pages. In this case, after a few seconds, an information line is displayed showing the number of subpages. Select the sub page by pressing or .

To freeze a Teletext page

Press the button to freeze the page. Press again to cancel the freeze.

Revealing the index page

Press the button to reveal the index page (normally page 100).

Fastext

(only available if the TV station broadcasts Fastext signals) When the colour coded menu appears at the bottom of a teletext page,

press a coloured button on the remote control (red, green, yellow or blue) to access the corresponding page.

Using the feature "Page Catching"

1 This feature is used if the selected teletext page has several page

numbers on it (eg the index page).

2 Press the button. 3 Push the joystick or to select the desired page number

then press the buttons. The requested page is displayed after a few seconds.

216-02

01 03 04 05 06 07 0802

continued...

Teletext

Using the Teletext menu

1 With Teletext switched on, press the button on the remote

control to display the teletext menu on the TV screen.

2 Push the joystick or to select your chosen item, then push to

to display the relevant sub menu.

3 To remove the teletext menu from the screen, press the

button.

Top / Bottom / Full

The Top/Bottom/Full sub menu allows you to enlarge different sections of the Teletext page. Push the joystick to enlarge the upper half of the screen, push to enlarge the lower half. Press the button to restore the page to normal size.

Text Clear

After having selected this function, you can watch a TV channel while waiting for a requested Teletext page. As soon as the page is available, the symbol changes colour. To view the page, press .

Teletext

Top / Bottom / Full Text Clear Reveal Time Page Page Overview

Select: Enter:

Top: Bottom: Full: OK

Reveal

Some teletext pages contain hidden information (e.g. for a quiz). By pressing Reveal the hidden information appears on screen.

Time Page

(depending on availability of teletext service) You can call up a time-coded page such as an alarm page at a time

specified by you. After you have displayed the Time Page sub menu:

1 Press the numbered buttons on the remote control to enter the

three digits of the desired page.

2 Press the numbered buttons again to enter the four digits of the

desired time.

3 Press the button to store the desired time. The time is displayed

in the top left corner of the screen. At the requested time the page is displayed.

Page Overview

(depending on availability of teletext service) In the Page Overview menu the block and group pages of TOP- Text

are sorted into two columns, so that the customer can easily select the desired page. For each block page in the first column, the corresponding group pages are shown in the second column. Push the joystick or to select the desired block page, then push to enter to the group pages column. Push or to select the desired group page . Finally, press the button to display the page.

Time Page

PAGE TIME

- - : - -– – –

Select Page: 0-9 Next:

Teletext

NexTView

NexTView *

* (depending on availability of service)

NexTView is an on-screen electronic programme guide (EPG), providing you with programme information for different broadcasters.

Selecting your NexTView provider

The TV set automatically selects the best NexTView provider for

you. This provider is available about 30 minutes after the channel tuning. You can however change this selection of provider if you wish.

1 Press the button on the remote control to display the menu

on the screen.

2 Push the joystick or to select the symbol, then push

to enter the Set Up menu.

3 Push or to highlight Select NexTView then push to enter. A

list is displayed containing all available NexTView providers.

4 Push or to select the desired provider then press the

button to store.

5 Press the button to remove the menu from the screen.

Displaying NexTView

1 Press the button repeatedly on the remote control to switch

NexTView on and off. * In some cases, you may also need to push the joystick to display the Sony electronic programme guide.

2 Push the joystick//orto move the cursor

around the screen.

3 Press the button to confirm a selection.

a) If you press the button in the date, time or icon (themes)

columns, you change the programme list according to the selection.

b) If you press the button in the programme list, you directly

display the channel if the broadcast is currently running, or, you display the "Long Info" menu if the broadcast is running at some future time.

Using the "Individual Setting" menu

07 Tue

12:38

Wed

Thu

Sun

Mon

Tue

10 Fri

11 Sat

12

13

7

8

9

Index

Star Wars Super RTL

Werner - Beinhart Pro 7

Flui grüsst den Rest der Welt Kabel 1

Once upon a time in the West Euronews

International News RTL Plus

Hat der alte Hexenmeister sich doch einmal fortbegeben, und nun sollen seine Geister auch nach meinem Willen leben.

Picture Adjustment

Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone

Select: Enter Menu:

Set Up

Auto T uning Programme Sorting

Select NexTView

AV Preset Manual Set Up

Start Auto Tuning

Select:

Set Up

Auto T uning Programme Sorting Select NexTView AV Preset Manual Set Up

Select:

Enter:

SWISS

TXT TPS / RINGIER

Tue 07. 04 .98

 10:35 - 12:45

 10:20 - 12:00

 10:45 - 10:50

 11:00 - 11:20

 11:45 - 12:50

full selection list personal selection news broadcasts movies sports entertainment children return to last menu

Personal

Normal

Start

- - - - - - -



- - - - - - -

On Off

You can make a personal list of the types of programmes you wish to view on the programme guide.

1 Push the joystick or to select the icon then push to to

display the "Individual Setting" menu.

2 Push the joystick or to select your chosen item on the screen

then press the button to confirm your choice.

3 Repeat step 2 for all the items you wish to have in your list. 4 When you have finished the list, push to select the icon. 5 Press the button to return to the previous menu. 6 Push the joystick or to select the icon then press the

button again to activate your "Individual Setting" filter.

continued...

NexTView

Using the Long Info menu

With this menu screen, you can set timers or record selected programmes.

1 Push or to select a future programme in the programme list

column.

2 Press the button to display the Long Info menu on the TV

screen.

To set the timer

Push the joystick or to highlight the icon then press the button repeatedly to "set the timer" or "cancel the timer". If you choose to set the timer, the programme is marked with a clock symbol and a message appears on the screen shortly before the programme is due to start asking whether you wish to still view this programme.

To view the timer table

Push the joystick or to highlight the icon then press the button repeatedly to switch on/off the timer table. This table shows the programmes on which you have already set a timer. (You can set a timer on up to 5 programmes).

First nextTView/EPG-Providers in Europe

07 Tue

SWISS TXT TPS / RINGIER nexTView

12:38

Address Mapping  The position of the addresses in the OSDA is shown in the following diagram. The position values of the DPW are set to '0'.  If other values are set, the complete combination will be scrolled.  Example: if the DPWC is set to '63', the char-

This channel has been set for a timer

VPS/PDC

Speed

SP

Timer Prog

VCR1

Tue 07. 04 .98

To record programmes

(only with Smartlink VCRs)

1 Connect your Smartlink VCR. 2 Push the joystick or to select then press the button

to download the information to your VCR.

3 To set up the VCR:

VPS/PDC

Push the joystick or to select VPS/PDC then press the button repeatedly to select On or Off. With this setting on you have the guaranteed recording of the whole broadcast should there be a change in the TV programme. This only works if the selected channel broadcasts a VPS/PDC signal.

Speed

Push the joystick to select Speed then press the button repeatedly to select between SP for standardplay or LP for longplay. With longplay you can record twice as much on a videotape. The picture quality however may suffer.

VCR Setup

Push the joystick to select VCR Setup then press the button repeatedly to select which VCR you wish to programme, namely VCR1 or VCR2.

4 Finally, push the joystick to select the icon then press the

button to remove the menu from the TV screen.



VPS/PDC

Speed VCR Setup

On SP

VCR1

NexTView

Optional Connections

8mm/Hi8/DVC camcorder

Connecting Optional Equipment

Using the following instructions, you can connect a wide range of optional equipment to this TV set.

S.VHS/Hi8/DVC camcorder

To avoid picture distortion:

• Do not connect

equipment to F and G connectors at the same time.

“PlayStation”*

DVD

Dolby

Surround

Amplifier

* “PlayStation”

is a product of Sony Computer Entertainment, Inc.

* “PlayStation”

is a trademark of Sony Computer Entertainment, Inc.

“PlayStation”*

DVD

Decoder

Acceptable input signal

A Audio/video and RGB signal B Audio/video and RGB signal C Audio/video and S video signal D Centre speaker input Set “Speaker”

on the Features menu to “Centre in”.

E No inputs F S Video signal G Video signal H Audio signal I No input

Hi-Fi

VCR

Available output signal

Video/audio from TV tuner. Video/audio displayed on TV screen (monitor out). Video/audio from selected source. No outputs.

Audio signal. No output. No output. No output. Audio signal to headphones.

Optional Connections

Using Optional Equipment

Additional Information when connecting equipment

Connecting a VCR

We recommend you connect your VCR to the C socket using a scart lead. If you do not have a scart lead, use the “Manually Tuning the TV” section of this instruction manual to tune in the channel of the VCR test signal to TV programme number “0”. Also refer to your VCR instruction manual to get the VCR test signal. If your video supports Smartlink, please refer to the “Smartlink” section of this instruction manual.

Connecting to External Audio Equipment

1 To listen to the sound from the TV set on Hi-Fi equipment:

Plug in your Hi-Fi equipment to the E sockets on the rear of the TV set if you wish to amplify the audio output from the TV. The output level from the E sockets can be varied by adjusting the volume of the headphones output. Refer to the “Adjusting the sound” section of this instruction manual to adjust this.

2 To listen to Dolby Prologic system sound on the TV set speakers:

Plug in your Dolby Prologic system decoder amplifier to the D socket on the rear of the TV set if you wish to listen to the audio

output from your equipment on the TV speakers. If you have a Dolby amplifier, connect the centre output from your amplifier

to the D socket to use the TV set as a centre speaker. Refer to the “Using the Features menu” section of this instruction manual and set the option “Speaker” to “Centre in”.

Remember that the maximum input level of this input is 30 W. Be careful never to exceed this.

For mono equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select the 4 input signal using the instructions on this page below.

Select and View the Input Signal

In order to get the input signal of a connected equipment onto the TV screen, you need to select the symbol of the connector to which you have connected the device. e. g. : If your VCR is connected to the connector with the symbol repeatedly until you see the symbol 1 on the screen.

Y1/ 1. Press the button on the remote control

1 Connect your equipment to the designated socket, as shown on the previous page. 2 Press the button on your remote control repeatedly until the correct input symbol

appears on the screen.

Symbol Input signals

1 • Audio/video input signal through the Scart connector A or * RGB

through Scart connector A.

2 • Audio/Video input signal through the Scart connector B or * RGB

through Scart connector B.

3 • Audio/Video input signal through the Scart connector C or * S Video

through Scart connector C.

4 • S Video input signal through the 4-pin DIN connector F or * video input

signal through phono jack G and audio input signal through phono jacks H.

* (automatic detection of the signal according to the connected equipment)

3 Switch on the connected equipment. 4 To return to the normal TV picture, press the button on the remote control.

Optional Connections

+ 182 hidden pages