Conditions of Use:
(1) Please use this information only for the purpose of repair and recycling of Sony products. Using this information for any
purpose other than the purpose described foregoing is forbidden.
(2) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part
without the prior written permission of the author.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is upto-date before using it.
4. Metal Washer (Flat) or Coin (for remove Rear Cover)
5. Ruler (for remove Rear Cover)
2 OPTIONAL EQUIPMENT
TOOLS & EQUIPMENTS
1. Screwdriver (e.g. #0 Phillips Screwdriver)
2. Parts Tray for loose screws and small items
3. Flashlight
For Surface Mounted Parts/Connectors;
Hot-Air Type soldering Iron is needed.
Thickness: approx. 1.5mm
Diameter: 20~25mm
(wrap in tape (L=50mm))
Plastic or Metal Ruler
(In case of Metal ruler, wrap
in tape (L=50mm) for prevent
scratches)
3
Page 4
DISSASSEMBLY AND REMOVAL CAUTION
4
Page 5
Only on limited region / country /
EXPLODED VIEW
•Place the TV set facing downwards on a stable, level surface before disassemblyand assembly of parts.
!
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential information. Strictly follow the instruction whenever the components are
repaired and/or replaced.
1-4. EXPLODED VIEW AND PART LIST
17
14
13
10
5
11
(*) Parts are not stocked since they are seldom required for routine service.
Some delays should be anticipated when ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference numberbeside the part indicates the disassembly sequence.
Remove screws before disassembly. Unplug connectors before disassembly
*
TV model
18
19
12
2
16
4
3
1
15
6
8
9
7
Stand
20
21
5
Page 6
CONNECTORS
KEY(1)
CN800(B)(1)
SP(1)
BT(1)
H(1)
CN7(TCON)(1)
CN5(TCON)(1)
CN6(TCON)(1)
HARNESS/CABLES
2
8
3
6
7
REF.
NO
1
2
3
4
5
6
7
8
4
5
PART NO.DESCRIPTIONDESTINATIONREMARKS
1-007-226-11
1-007-227-11
1-007-455-11
1-007-456-11
1-007-457-11
1-007-458-11
1-007-459-11
1-972-658-11
CONNECTOR ASSY 3PCN1202(B)-
CONNECTOR ASSY 20PCN6401(PSU)-
CONNECTOR ASSY 6PCN9007(B)-
FLEXIBLE FLAT CABLE 20PCN4801(B)-
FLEXIBLE FLAT CABLE 25PCN1201(B)-
FLEXIBLE FLAT CABLE 41PCN9200(B)-
FLEXIBLE FLAT CABLE 51PCN9201(B)-
CONNECTOR ASSY 28PCN6601(PSU)-CN8(TCON)-
1
6
Page 7
SET PART LIST
PARTS LIST
REF. NOPART NO.
1
2
3
4
4
5
6
7
8
9
10
11
12
13
14
15
5-012-160-31LABEL, UNDER TERMINAL (BM3J)
5-014-965-21LABEL, SIDE TERMINAL (LMN)
4-745-608-01AC COVER (AT)
!
1-839-643-13POWER-SUPPLYCORD(WITHCONN.)
!
1-839-667-13POWER-SUPPLYCORD(WITHCONN.)
5-015-439-01REAR COVER (M DRN) A
4-726-396-42BRACKET UNDER (BM2A)
5-015-523-21BRACKET, SIDE (M DRN)
5-012-017-01HOLDER, SIDE SW (CRY)
1-004-496-111 KEY SWITCH UNIT
1-005-555-31SP-BOX ASSY,FY20 D40-WF-DRN
5-015-403-01GUIDE, SC (M DRN)
1-005-419-11WLAN/BT MODULE(11AC)
!
1-006-403-12G93F-STATICCONVERTER(TV)
5-015-816-01SHT, INSULATION (DRN M)
A-5014-201-ACOMPLSVCBM3J20_EUUK_NDL
DESCRIPTION
REMARKS
CEI
UKA
Cable
Internal Power Supply
Printed Circuit Board, incl. capacitors
16
17
18
19
20
21
4-699-975-02SHEET,THERMAL(5567H)
2-650-770-31SLIDE, CLAMP (Qty, 3pcs)
*5-018-175-01BRACKET, VESA (M DRN)
1-008-811-11OLEDPANEL(L48ENA1)
!
5-015-573-11NECK, STAND (M DRN) (Qty, 2pcs)
4-745-114-01STAND, BASE (L PAN) A
OLED Panel
7
Page 8
OTHER PARTS
PARTS LIST
PART NO.
4-535-064-04
4-595-704-11
4-262-708-04
5-015-443-01
5-015-444-01
5-015-572-01
1-493-548-22REMOTE COMMANDER (RMF-TX600E)
7-600-031-97TAPE (3M 1350FB-1)15MMX66M BLK
4-599-900-02CLAMPER, CABLE L (PUC) ( at Stand, Base )