Sony KE-42M1 Operating Instructions (primary manual) Operating Instructions Manual
2-021-773-11 (1)
EGA
Fiat Panel Color TV
Operating Instructions
WEGA ENGINE
@2004 Sony Corporation
Owner's Record
The model and serial numbers are located at the rear of the TV.
Record these numbers in the spaces provided below. Refer to them
whenever yon call upon your Son?' dealer regarding this product.
Model No.
Serial No.
Contacting Sony
Ifi after reading the following instructions, you have additional
questions related to the use of yottr Sony TV, please call one of the
following numbers.
Customers in the continental United States contact the Direct
Response Center at:
1-800-222-SONY (7669)
Customers in Canada contact the Customer Relations Center at:
1-877-899-SONY (7669)
WARNING
To reduce the risk of fire or shock hazard do
not expose the TV to rain or moisture.
A'I-I'ENTION
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVR]R
PRECAUCION
RIESGO DE CHOQUE ELECTRICO
NO ABRIR
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
This symbol is intended to
alert the user to the presence
of uninsulated "dangerous
voltage" within the product's
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
CAUTION
To prevent electric shock do not use this
polarized AC plug with an extension cord.
receptacle or other outlet unless the blades can
be fully inserted to prevent blade exposure.
Note on Caption Vision
This television receiver provides display of
television closed captioning in accordance with
B15.119 of the FC( rules.
Note to CATV System Installer
This reminder is provided to call the CATV
system installer's attention to Article 820-40 of
the National Electrical (?ode (NEC) that
provides guidelines for proper grmmding and, in
particular, specifies that the cable grotmd shall
be connected to the grounding system of the
building, as close to the point of cable entry as
practical.
Use of this television receiver lbr other than
private viewing of programs broadcast on UHF
or VHF or transmitted by cable companies ±br
the use of the general public may reqnire
authorization from the broadcaste_cable
company and/or program turner.
NOTIFICATION
This eqnipment has been tested and t'otmd to
comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This eqnipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harlnful interference with radio
conmmnications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment offand on, the user is encouraged
to tD" to correct the interference by one or more
of the lbllowing measttres:
[] Reorient or relocate the receMng antelmas.
[] Increase the separation between the
equipment and receiver.
[] Connect the equipment into an outlet on a
circuit different from that to which the
receiver is creme(ted.
[] Consult the dealer or an experienced radio/
TV technician for help.
You are cautioned that an?"changes or
modifications not expressly approved in this
manual could void your anthority to operate
this equipment.
Safety
[] Operate the TV only on 120 V AC.
[] The plug is designed, for safety purposes, to
fit into the wall outlet only one way. If you
are unable to insert the plug fully into the
outlet, contact yonr dealer.
[] If any liquid or solid object should fall
inside the cabinet, unplug the TV
ilurnediately and have it checked by
qualified service personnel before operating
it further.
[] If you will not be using the TV *br several
days. discomlect the power by pulling the
plug itsel£ Never pull on the cord.
[] For details concerning safety precautions,
see "Important Safeguards" on page 4.
Important Notice
[] \_llen used at an altitude of greater than
1,900m or 6.2481"eet (air pressure less than
800hPa), this Plasma Display Panel may
generate a low buzzing sourld as a result of
the difference between the interior and
exterior air pressare of the panels. This is
not considered a defect and is not covered
under by the Limited Warranty.
Installing
[] To prevent internal heat bnildnp do not
block the ventilation openings.
[] Do not install the TV in a hot or humid
place or in a place snbject to excessive ctust
or mechanical vibration.
[] Avoid operating the TV at temperatures
below 5°((4Y'F).
[] If the TV is transported directly from a cold
to a wam_ location, or if the room
temperamre changes suddenly, the picture
may be blurred or show poor color clue to
moisture condensation. In this case, please
wait a few hours to let the moisture
evaporate before turning on the TV.
[] To obtain the best picture, do not expose
the screen to direct illnlnination or direct
sunlight. It is recolnmended to use spot
lighting directed down from the ceiling or
to cover the windows that face the screen
with opaque drapery. It is desirable to
install the TV in a room where the floor and
walls are not of a reflective material.
CAUTION
How to reduce the risk of"Image Retention"
on your TV
\*lien using TV games, compmers and
similar products with your TV. or viewing a
TV station whose logo always stays on the
screen, keep the brightness and contrast
fnnctions at low settings.
Bright, stationary images such as TV station
logos displayed on your TV can cause
permanent damage to yottr TV, resulting in
retention of the image in the picture. Please
take the following steps to reduce the risk of
causing image retention:
View a variety of program sonrces or
progrannning material.
hnage retention can occur when bright
stationary images such as TV station logos
are viewed. (?hanging the program lnaterial
viewed reduces the possibility that a single
image will become imprinted on the picture
tubes in your TV.
\_11en viewing programs with stational T
images, adjust the picture setting to reduce
the "Pictttre" and "Brighmess" levels. Image
retention is accelerated by higher
"Brightness" and higher "Picture" settings.
Please see page 59 for instructions on
ac[iusting pictttre settings.
This will help you reduce the risk of causing
image retention.
IMAGE RETENTION IS NOT COVERED
BY YOUR WARRANTY
(Continued)
3
CAUTION
Use the following SONY appliance(s) only"with the following WALL-
MOUNT BRACKET. Use with other WALL-MOLLNT BRACKET may
cause instability and result in possible i11.iury.
SONY APPLIANCE MODEL NO.
KE-42M1
SONY WALL-MOLrNT BRACKET
MODEL NO.
SU-PW2
To Customers
Sufficient expertise is required for installing the specified product. Be
sure to subcontract the installation to Sony dealers or contractors and pay
adequate attention to safety during the installation.
ENERGYSTAR
As an ENEROYSTAR®Partner, Son)' Corporation has
determined that this product meets the E_ERC_YSTARs
guidelines for energy efficiency.
ENERGYSTAR_ is a U.S. registered mark.
Trademark Information
TruSnrronnd. TrnBass SRS and the (O) sylnbol are trademarks of
SRS Labs. Inc. TruSurrotmd teclmology is incorporated under license
from SRS Labs, Inc.
Licensed by BBE Sound. Inc. under USP4638258, 4482866. "BBE" and
BBE symbol are trademarks of BBE Sound, Inc.
H rn I This TV incorporates High-Definition
TM C_
Multimedia Iuterf'ace (HDMI , ) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Wega, Stea@ Sonnd, Digital Reality Creation, Caption Vision, and
CineMotion are registered trademarks of Sony"Corporation.
Important
Safeguards
Before using your TV, please read these instructions completely, and
keep this mannal for furore reference.
Carefully observe and comply with all warnings, cautions and
ins_uctions placed on the set or described in the operating instructions or
service manual.
WARNING
To guard against injury the following basic safety precautions should be
observed in the installation, use and servicing of the set.
Use
Power Sources
This set should be operated only from the type of
power sonrce indicated on the serialilnodel plate.
If you arc not snre of the type of electrical power
supplied to your home, consult vonr dealer or local
power company. For those sets designed to operate
from battel) power, refer to the operating
instructions.
Grounding or Polarization
This set is equipped with a polarized AC power cord plug (a plug having
one blade wider than the other), or with a three-wire grounding type plug
(a plug having a third pin ±br gounding). Follow the instructions below:
For the set with a polarized AC power cord plug
This plug will fit into the power outlet only one way.
This is a safety featnre. If you are unable to insert
the plug fully into the outlet, try reversing the plug.
If the plug still fails to fit, contact yonr electrician to
have a suitable outlet installed. Do not dd'eat the safety ptu'pose of the
polarized plug by forcing it in.
Wall outlet
Do not use a poor fitting ontlet.
Insert the plug fully into the outlet. If it is loose, it may
cause arcing and result in fire.
Contact your electrician to have the outlet changed.
Wiring
Unplug the AC power cord when wiring cables.
Be sure to unplug the AC power cord for your safety', when hooking up.
Electric Shock
Do not tonch the AC power cord or the unit
with a wet hand.
If you plug/unplug the AC power cord from the
unit with a wet hand, it may cause electric
shock.
Cleaning
Clean the AC power plug regularly.
If the plug is covered with dust and it picks tip
moisture, its insulation may deteriorate and
result in fire. Unplug the AC power plug and
clean it regularly.
For the set with a three-wire grounding type AC
plug
This plug will only fit into a grounding-type power
outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician
to have a suitable outlet installed. Do not defeat the
safety purpose of the grounding plug.
Overloading
Do not overload wall outlets extension cords or
convenience receptacles be3smd their capacity, since
this can result in fire or electric shock.
Always turn the set offwhen it is not being used.
When the set is left tmattended and tmused for long
periods of time. unplug it from the wall outlet as a
precaution against the possibility of an internal
malfunction that could create a fire hazard.
Ifa snapping or popping sound fi:om a TV set is
continuous or frequent while the TV is operating,
unplug the TV and consult 3star dealer or service
technician. It is normal for some TV sets to make
occasional snapping or popping sounds, particularly
when being turned on or off.
AC power cord
If yon damage the AC power cord it may result in fire or electric shock.
[] Do not pinch, bend, or twist the cord excessively. The core lines
may be bared and cut. and cause short-circuit, resulting in fire or
electric shock.
[] Do not convert or damage the AC power cord or display interi;ace
cable.
[] Do not put anything heavy on the AC power cord. Do not pull the
AC power cord.
[] Keep the AC power cord away fi:om heat sonrces.
[] Be snre to grasp the plug when discolmecting the AC power cord.
If the AC power cord is damaged, stop using it and ask your dealer or
Son}" service center to exchange it.
Object and Liquid Entry
Never push objects of any kind into the set through
the cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the
set.
Ventilation holes
Do not insert anything in the ventilation holes. If metal
or something flanmlable enters, it may result in fire or
electric shock.
Cleaning
Unplug the AC power cord when cleaning this unit.
If not. it may result in electric shock.
(?lean the cabinet of the TV with a &y soft cloth. To
remove dust from the screen, wipe it gently with a
soft cloth. Stubborn stains may be removed with a
cloth slightly dampened with a solution of mild soap and warn1 water.
Never use strong solvents such as thinner or benzine for cleaning.
If the picture becomes dark after using the TV for a long period of time
it may be necessa D"to clean the inside of the TV. Consult qualified
service persolmel.
Attachments
Do not use attachments not reconmlended by the
manuJ:;actnrer, as they may cause hazards.
Medical institution
Do not place this unit in a place where
medical equipment is in use.
It may cause malfunction of medical
instruments.
Moisture and flammable objects
[] Do not use power-line operated sets near
water for exalnple, near a bathtub. F-_'-">"_"_Ph
washbowl, kitchen sink, or latmdry tub. in a (_ _]J__)
wet basement, or near a swinnning pool, etc.
It may result in fire or electric shock.
Do not let this unit get wet. Never spill liquid of ,_v
any kind on the trait. If an)' liquid or solid object
does fall through, do not operate the unit. It may
result in electric shock or damage to the trait.
Have it checked immediately by qualified personnel.
To prevent fire, keep inflammable objects or naked lights (e.g.
candles) away from the set.
Accessories
Do not place the set on an unstable cart, stand, table
or shel£ The set may l;all, causing serious injuD" to a
child or an adult and serious damage to the set. Use
only a cart or stand reconnnended by Sony l\_r the
specific model of TV. No part of the TV set should
overhang any edge of the TV cart or stand: an)"
overhanging edge is a safety hazard. An appliance and cart
combination should be moved with care. Quick stops,
excessive force, and uneven snrfaces may cause the
appliance and cart combination to overtnrn.
Dispose of used batteries
To preserve ottr environment, dispose the used batteries according to
your local laws or regulations.
Damage requiring service
If the surfiace of the TV cracks do not touch it until yon unplug the AC
power cord.
Otherwise electric shock may result.
Broken pieces
Do not throw anything at the trait.
The screen glass may explode by the impact and cause serious i11jury.
Cable wiring
Take care not to catch your feet 011the cables. It may damage the unit.
Heat
Do not touch the suri;ace of the TV.
It remains hoL even for some time after the TV is turned off.
(ContinHed)
5
Installation and moving
Carry the TV in the specified manner
Carrying the TV requires at least two people.
If you carry the TV in a maimer other than that specified and without
the specified nnlnber of persons, it may drop and a serious i_iun" may
result. Be sttre to follow the instructions given below.
[] Carry the TV with the specified number of
persons.
[] Carry the TV holding the upper and bottom
flames of the TV as illustrated. Do not carry
it holding the speaker units.
[] Hold the TV securely when carrying it.
[] As the glass sur±;ace of the TV has a special coating, be careful to
avoid touching the glass sttr±;ace as far as possible.
[] When transporting, do not stfl'_iect the set to shocks or vibration,
or excessive force.
Installation
When installing the TV on the wall. be snre to
have qualified contractors install and stay away
from the unit. Ifa person other than the
qnalified contractors install the TV on the wall
using a wall mount unit, the unit may *;alland
cause serious iNury when the unit is not
installed secnrely.
Optional accessories
Observe the following when installing the TV using a
stand or wall mount unit. If the TV is not secured
properly, it may ±;alland cause iNury.
[] Be sure to follow the operating instructions supplied
with your stand or wall mount unit when installing the unit.
Be snre to attach the brackets supplied with yonr stand or wall
mount unit.
Protruding location
Do not install the TV in protruding locations. If you install the unit in the
following locations, injttry may result.
[] Do not install the unit in a location where the unit protrudes, such as
pillars.
[] Do not install the unit in a location that may cause facial injnry.
Oils
Do not install this unit in restaurants where oily vapors occnr. Dust
absorbing oil may enter into the mlit and damage the unit.
Corrosion
If you use this unit near the seashore, salt may corrode metal parts of the
tulit and cause internal damage or fire.
It may also shorten the life of the unit.
Ventilation
The slots and openings in the TV are provided for necessary ventilation.
To ensure reliable operation of the set, and to protect it from overheating,
these slots and openings mnst never be blocked or covered.
Unless proper ventilation is provided, the unit may gather dnst and get
dirty. For proper ventilation, Observe the
following:
[] Do not install the unit turned backward or
sideways.
[] Do not install the unit turned over or npside
down.
[] Never cover the slots and openings with a cloth or
other materials.
[] Never block the slots and openings by placing
the set on a be& so±;a,rug or other similar
surface.
Never place the set in a confined space, such as a
bookcase or built-in cabinet, tmless proper
ventilation is provided.
Do not place the set near or over a radiator or
heat register, or where it is exposed to direct
sunlight.
I 5= ,
JL2L
] I [ "l_ii
Leave some space around the unit. Otherwise. adequate air-circulation
may be blocked causing overheating and cause fire or damage the unit.
When installing the unit on the wall
30 cm (11 7/8 inches)
1 i
10 cm (4 inches)
10 cm (4 inches)
When installing the unit using a stand
30 cm (! 1 7/8 inches)
!
10 cm (4 inches) 10 cm
(4 inches)
Allow this
much space.
Never install the unit as follows:
Air circulation is blocked. Air circulation is blocked.
Outdoor use
Do not install this mlit outdoors. If the unit is
exposed to rain it may result in fire or electric
shock. If the unit is exposed to direct sunlight
the unit may heat up and it may damage the
unit.
\\@
" L
Vehicle and ceiling
Do not install this tulit in a vehicle or hung
from the ceiling.
Bmnping of the vehicle may cause the set to
fall down and cause i111ury.
Ship and vessel
Do not install this trait m a ship or vessel. If the
unit is exposed to seawater, it may cause fire or
damage the unit.
AC power cord
b
Unplug the AC power cord when moving the set.
Do not move the set with the AC power cord plugged in. It may damage
the AC power cord and result in fire or electric shock.
Fall
Do not hang anything on the unit.
The unit may Pall from the stand or wall mount trait,
causing damage or serious inju13".
co;
Power-Cord Protection
Do not allow anything to rest on or roll over the
power cord. and do not place the set where the power
cord is stff'_iectto wear or abuse.
Antennas
Outdoor Antenna Grounding
If an outdoor antenna is installed, follow the precantions below. An
outdoor antemm system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can come
in contact with such power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT
WITH THEM IS ALMOST INVARIABLY FATAL.
Be sure the antelma system is grounded so as to provide some protection
against voltage surges and built-np static charges.
Section 810 of the National Electrical Code (NEC) in USA and Section
54 of the Canadian Electrical Code in Canada provides information with
respect to proper grmmding of the mast and supporting structure
grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antemm discharge unit connection to
grounding electrodes, and requirements for the grounding electrode.
Antenna Grounding According to the National
Electrical Code, ANSI/NFPA 70
'_ Antenna lead-in wire
_'/Ground clamp_
__------_/'z/ _"_ _E Antenna discharge unit
] Electric se_l / _ I(NEC Section 810-20)
] eauiDment _ ]._, /_.-_vl Grounding conductors
_--J_bJ,/_ (NEC Section 810-20)
Ground clamps
_..__/- Power service grounding
electrode system
(NEC Art 250 Part H)
NEC: National Electrical Code
Lightning
For added protection for this television receiver during a lighming storm.
or when it is left unattended and umlsed for long periods of time. unplug
it from the wall outlet and disconnect the antelma. This will prevent
damage to the receiver due to lightning and power-line surges.
(Continued7
7
Service
Damage Requiring Service
Unplug the set from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
[] When the power cord or plug is
damaged or frayed.
[] If liquid has been spilled into the set. A_u_ _s_ P*a
[] If the set has been exposed to rain or water.
[] If the set has been sut!iect to excessive shock by
being droppe& or the cabinet has been damaged.
If the set does not operate nomaally when
following the operating instructions. Acliust only
those controls that are specified in the operating
instructions. Improper acliusmlent of other controls
may result in damage and will often require
extensive work by a qualified technician to restore
the set to nom_al operation.
[] When the set exhibits a distinct change in
performance, it indicates a need ±Brservice.
Servicing
Do not attenapt to service the set yourself since opening
the cabinet may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
Replacement Parts
When replacement parts are required be sure the
service teclmician certifies in writing that he/she
has used replacement parts specified by the
manufacturer that have the same characteristics as
the original parts.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
Safety Check
lTpon completion of any service or repairs to the set. ask
the service technician to perform routine safety checks (as
specified by the manufi_cturer) to detemaine that the set is
in safe operating condition, and to so certify. \,X]lenthe set
reaches the end of its useful life, improper disposal could
result in a picture robe implosion. Ask a qualified service
technician to dispose of the set.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block an?" ventilation openings. Install in accordance with the
manufacturer's instructions.
8) Do not install near an?"heat sources such as radiators, heat registers.
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety pttrpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for )_ur safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete ontlet.
10) Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart. stand, tripod, bracket, or table specified by
the naanufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
i111ury_om tip-over.
13) Unplug this apparatus during lightning storms or when unused for
long periods of time.
14) Refer all servicing to qualified service persormel. Servicing is
required when the apparatus has been damaged in an?"way, such as
power-supply cord or plug is damaged, liqnid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
Installing the TV
Unpacking ................................................ 11
Overview of the Remote Control ............ 11
Remote Control Descriptions ........... 12
Programming the Remote Control ... 14
Using your Remote Controls
with Other Equipment .................. 16
Overview of the TV Controls
and Connectors ................................... 18
Front Panel Controls and
Connectors .................................. 18
Rear Panel Connectors .................... 19
Preventing the TV
from Falling Down ........................ 20
Connecting and Setting the TV
Basic Connections (Connecting Cable or
an Antenna) ......................................... 21
Connector types ............................... 21
Connecting directly to cable or
an antenna ................................... 21
Cable box connections ..................... 21
Connecting Optional Equipment ...... 22
Connecting the Power Cord ............. 22
Connecting a VCR and Cable TV ........... 23
Connecting a Satellite Receiver ............. 24
Connecting a Satellite Receiver
and a VCR ............................................ 25
Connecting an Audio Receiver .............. 26
Connecting a DVD Player with
Component Video Connectors .......... 27
Connecting a DVD Player with
S Video and Audio Connectors ......... 28
Connecting a Digital Cable Box ............. 29
Connecting a Digital
Satellite Receiver ................................ 30
Connecting a Digital Satellite Receiver
with HDMI Connector .......................... 31
Connecting a DVD Player or Digital
Satellite Receiver via AV Receiver with
CENTER SPEAKER IN terminals ....... 33
Connecting a Camcorder ........................ 34
Setting the TV .......................................... 35
Setting the Channels ........................ 35
Using the Menu ........................................ 37
Selecting the On-screen Menu
Language ............................................. 38
Watching the TV
Watching the TV ...................................... 40
Watching with closed caption ........... 41
Selecting the Picture Mode ..................... 42
Selecting the Effect Mode ....................... 43
Using the Wide Screen Mode ................. 44
Changing the Wide Screen Mode .... 44
Changing the Wide Screen Mode
using the menu ............................ 46
Using the Freeze Function ...................... 48
Using the Picture Off Function ............... 48
Using the Center Speaker Feature ......... 49
Setting the Center Speaker Mode .... 49
Listening to the center speaker
sound from the TV's speakers ..... 50
Adjusting the phase of the sound ..... 51
Setting the Video Inputs ......................... 52
Using the Video Label and
Skip Feature ........................................ 53
Using Favorite Channels ........................ 54
Setting your favorite channels .......... 54
Watching favorite channels .............. 55
Using the Channel Label Feature ........... 55
(Contimted)
9
Using Advanced Features
Adjusting the Picture Position
Vertically .............................................. 57
Adjusting the Picture Position
Horizontally ......................................... 58
Adjusting the Picture Quality ................. 59
Adjusting the Sound Quality .................. 61
Selecting Stereo or
Bilingual Programs ............................. 62
Selecting stereo or bilingual
programs using the menu ............ 63
Selecting How to Control the Volume
of the TV's Speakers .......................... 63
Selecting the TV Speakers or an External
Amplifier to Listen to the TV .............. 64
Using the Parental Control Feature ....... 65
Activating the Parental Control
feature ......................................... 66
Selecting a Custom Rating ............... 68
What the Ratings Mean ........................... 70
Ratings in the U.S.A ......................... 70
Ratings in Canada ............................ 72
Using the Screen Saver Function .......... 74
Turning Off the TV Automatically .......... 75
Additional Information
Troubleshooting ...................................... 77
Self-diagnosis function ..................... 77
Trouble symptoms and remedies ..... 77
Specifications .......................................... 79
Index ......................................................... 80
10
Unpacking
When you unpack this unit, make sure it includes the
following:
Remote control (1) and
size AA batteries (2)
AC power cord (1)
75-ohm coaxial cable (1)
Overview of the Remote
Control
Insert two size AA batteries (supplied) by matching
the O and • on the batteries to the diagram inside
the remote control's battery compartment.
# ...............
i! ii i!!i!!i:iii!ii,:,....
Notes
• Remove the batteries to avoid damage from possible battery
leakage whenever you anticipate that the remote control will
not be used for an extended period.
• Handle the remote control with care. Avoid dropping it,
getting it wet, or placing it in direct sunlight, near a heater or
where the lmmidity is high.
• The supplied remote control can be programmed to operate most
video equipment (see "Programming the Remote Control" on
page 14).
¢s21
<
Clamp Screws (2)
Plug Holder for AC Power Cord (1)
Cleaning Cloth (1)
Operating Instructions (1)
Quick Setup Guide (1)
Warranty Card (1)
11
Remote Control Descriptions
VOL CH
RESET PICOFF MTS/SAP (0)
SONY
J
Tip
The MTSiSAP button, the number 5 button and the CH + button
have a tactile dot.
Use the tactile dot as a reference when operating the TV.
Button
[] DVD,VCR, SAT .......
CABLE Power
Buttons
[] MUTING
[] PICTURE
[] WIDE
[] JUMP
[] FREEZE
Description
Press to turn on and off the equipment
you have programmed into the remote
control. For details, see "Programming
the Remote Control" on page 14.
DVD/VCR: Press to turn on and off the
video equipment.
SAT/CABLE: Press to turn on and off
the satellite receiver or cable box.
Press to mute the sound. Press again or
press VOL+ to restore the sound.
Press repeatedly to cycle through the
available video picture modes: Vivid,
Standard, Pro. The video picture modes
can be also accessed in the Video
menu. For details, see "Adjusting the
Picture Quality" on page 59.
Press repeatedly to step through the
Wide Screen Mode settings: Wide
Zoom, Normal, Full, Zoom. The Wide
Screen Mode settings can be also
accessed in the Screen menu. For
details, see pages 44 and 46.
Press to jump back and forth between
two channels. The TV alternates
between the current channel and the last
channel that was selected.
Press to freeze the picture. Press again
to restore the picture. For details, see
"Using the Freeze Function" on page
48.
TOP MENU
[] FAVORITES
[] FUNCTION
Buttons
[] DVD VCR
Operating Buttons
When FLYNCTION is switched on DVD, VCR
Press to display the top menu of your
DVD VCR.
Press to display the Favorite Channels
list. For details, see page 54.
Press to have the remote control operate
the equipment you want. For details,
see "Programming the Remote Control"
on page 14.
When FUNCTION is switched on
DVD VCR, these buttons operate the
video equipment you have programmed
into the remote control. For details, see
"Using your Remote Control with
Other Equipment" on page 16.
Rewind
Play
Fast forward
|| Pause
• Stop
Q Record
12
Button
[] Input Select
Buttons
[] VOL +....
[] RESET
[] PIC OFF
[] POWER
[] DISPLAY
[] SLEEP
[] 0 - 9 ENTER
[] MENU
[]GD
[_F1
[] F2
[] CH+ ....
Description
Press to select the video equipment
connected to the TV's video inputs.
TV: Press to select the TV to watch the
TV programs.
VIDEO 1/2/3: Press repeatedly to cycle
through the video equipment connected
to the VIDEO IN 1 , the VIDEO IN 2
and the VIDEO IN 3.
If the video label is selected as "Skip,"
the selected input will be skipped from
the cycle.
VIDEO 4: Press to select the video
equipment connected to the HDiDVD
IN 4.
VIDEO 5: Press to select the video
equipment connected to the HDMI IN
5.
Press to adjust the volume.
Press to reset the settings to the factory
defaults. See pages 60 and 62. Also
used to clear Channel Label.
Press to turn off the TV screen. For
details, see "Using the Picture off
Function" on page 48.
Press to turn on and offthe TV.
Press once to display the current
channel number, and channel label. If
set, the cun'ent channel number will
display for 10 seconds.
Press repeatedly until the TV displays
the time in minutes (15, 30, 45, 60 or
90) that you want the TV to remain on
before shutting off. To cancel Sleep
Timer, press SLEEP repeatedly until
Sleep Off appears.
Press 0 - 9 to select a channel; the
channel changes after 2 seconds. Press
ENTER to change channels
immediately.
Press to display the menu. Press again
to exit from the menu. For details, see
page 37.
Press t,/.!./_,/,*, to move the on-screen
cursor. To select an item, press (_.
Press to select the function of your
video equipment which is programmed
on the TV's remote control.
Press to select the function of your
video equipment which is programmed
on the TV's remote control.
Press to scan through channels. To scan
quickly through channels, press and
hold down either CH.
Button
[] (O)
TViSAT
Description
Press to select the sound effect modes:
TruSun'ound, Off. The sound effect
modes can be also accessed in the
Audio menu. For more details, see
"Selecting the Effect Mode" on page
43.
When FUNCTION is switched on SAT/CABLE
Press to switch between the TV and the
satellite receiver.
[] MTS SAP
GUIDE
Press repeatedly to cycle through the
Multi-channel TV Sound (MTS)
options: Stereo, Auto SAP (Second
Audio Program), and Mono. The MTS
setting can be also accessed in the
Audio menu. For more details, see
"Selecting Stereo or Bilingual
Programs" on page 62.
When FUNCTION is switched on SAT/CABLE
Press to display the program guide of
your satellite program provider.
¢Cl
-q
<
13
Programming the Remote Control The remote control is preset to operate Sony brand
video equipment.
5
Sony Equipment Programmable Code Number
DVD VCR 701 (Sony Dream System)
SAT Cable 801 (Satellite Cable Box)
If you have video equipment other than Sony brand
that you want to control with the TV's remote
control, use the tbllowing procedures to program the
remote control.
3
4
Note
The equipment nmst have infrared (IR) remote capability in
order to be used with this remote control.
From the "Manut:acturer's codes" listed on page 15,
select the three-digit code number tbr the
manut:acturer's code of your equipment. If more than
one code number is listed, try entering them one by
one until you come to the correct code lbr your
equipment. Use the code number to complete the
following procedure.
1 Press the DVD/VCR (FUNCTION) and RESET
buttons simultaneously, or press the SAT/
CABLE (FUNCTION) and RESET buttons
simultaneously.
2 Press the function button you want to program.
3
4
5
To program a cable box or a satellite receiver
Press SAT/CABLE (FUNCTION).
To program video equipment
Press DVD/VCR (FUNCTION).
Enter the three-digit manufacturer's code number
using the 0-9 buttons.
Press ENT (enter).
To check if the code number works, aim the
TV's remote control at the equipment and press
DVD/VCR and/or SAT/CABLE (POWER) that
corresponds with that equipment. If it responds,
the programming is completed. If not, try using
the other codes listed tbr that manut:acturer.
Tips
• If you enter a new code number, the code number you
previously entered at that setting is erased.
• In some rare cases, you may not be able to operate your
equipment with the Sony remote control. In this case, use the
equipment's own remote control unit.
14
Manufacturer's codes Manufactm'er (ode Manufactm'er Code
Go Video 322. 339 340 Syhania 308 309. 338_
DVD Goldstar 332 310
Manufacturer (ode Hitachi 306 304. 305. S?_aphonic 338
Sony 751 338 Tashiro 332
General Electric 755 Instant Replay 309_ 308 Tatung 314. 336, 337
Hitachi 758 JC Penney 309 305 304. Teac 314 336. 338_
JVC 756 330 314 336. 337
337
Magnax ox 757 Yeclmics 309. 308
JVC 314. 336 337. Toshiba 312.311
Mitsubishi 761 345. 346. 347
Panasonic 753 Kenwood 314 336 332. Wards 327. 328,335.
331. 332
Philips 757 337
Yamaha 314 330. 336.
Pioneer 752 LG 332 337
RCA. Proscan 755 LXI (SEARS) 332 305. 330. Zenith 331
335. 338
Samsung 758
Ma_navox 308. 309.310
Toshiba 754 _ Cable Box
Marantz 314_ 336_ 337
Zenith 760 Manufactm'er Code
Marta 332
Sony 230
DVD changer Memorex 309_ 335 Hamlin:Regal 222, 223,224_
Manufacturer (;ode Minolta 305. 304 225. 226
Sony 765 MitsubishiMGA 323 324. 325. JerroldiG.I. 201 202. 203.
326 204. 205,206,
Panasonic 766
Multitech 325. 338. 321 207, 208,218.
222
DVD 5.1ch NEC 314. 336. 337
Oak 227. 228,229
Manufacturer (?ode Olympic 309. 308
Panasonic 219. 220, 221
Sony (DAV) 601. 602. 603. Optimus 327
Pioneer 214. 215
604 Orion 317
Scientific Atlanta 209.210, 211
Panasonic 308 309 306.
VCR 307 Yocom 216. 217
Manufacturer (;ode Pentax 305. 304 Zenith 212.213
Sony 301,302_ 303 Philco 308_ 309
Satellite Receiver
Admiral (M. Ward) 327 Philips 308_ 309_ 310
_Ianufacturer Code
Aiwa* 338,344 Pioneer 308
Sony 801
Audio Dynamic 314, 337 Quasar 308_ 309_ 306
Dish Network 810
Broksonic 319, 317 RCA PROSCAN 304. 305. 308.
309. 311. 312. Echostar 810
Canon 309, 308 313_ 310.329 General Electric 802
Citizen 332 Realistic 309 330. 328. Hitachi 805
Craig 302,332 335_ 324_ 338
Hugues 804
Curtis Mathes 304, 338_ 309 Sansui 314
Mitsubishi 809
Daewoo 341,312_ 309 Samsung 322 313. 321
Panasonic 803
DBX 314, 336_ 337 Sanyo 330, 335
RCA PROSCAN 802. 808
Dimensia 304 Scott 312 313. 321.
335 323 324. Toshiba 806. 807
Emerson 319, 320, 316,
325_ 326
317,318_ 341
Fisher 330, 335 Sharp 327, 328
Funai 338 Signature 2000 (M.Ward) 338_ 327 * If an Aiwa VCR does not work even
SV 2000 338 though you enter the code for Aiwa,
General Electronics 329, 304_ 309 enter the code for Sony instead.
O_
r..Q
-q
<
15
Using your Remote Controls with
Other Equipment
POWER buttons
(DVD/VCR,
SAT/CABLE)
Operating a cable box
To Press
Turn on/off SAT/CABLE (POWER)
Control a cable box SAT/CABLE (FUNCTION
Select a channel 0-9 buttons, ENT (enter)
Change channels CH +_
Go to the previous channel JUMP
Operating a satellite receiver
To Press
Turn on/off SAT/CABLE (POWER)
Control a satellite receiver SAT/CABLE (FUNCTION
Select a channel 0-9 buttons, ENT (enter)
Change channels CH +
Go to the previous channel JUMP
Display the channel number DISPLAY
Display the DBS guide GUIDE
Display the DBS menu MENU
Move the highlight (cursor) 4", II., _,, *
Select the item (_
Operating a VCR
To Press
Tnrn on/off DVDiVCR (POWER)
Control a VCR DVDiVCR (FUNCTION)
Change channels CH +
Record I1_ and Q sinmltaneously
Play I1_
Stop •
Fast forward
Rewind _1_
Panse II (press again to resume nomlal
playback)
Search the picture _ or _1_ during playback
forward or backward (release to resume normal playback)
3-9 buttons
(enter)
TOP MENU
FUNCTION buttons
(DVD/VCR,
SAT/CABLE)
VCR/DVD
operating buttons
3H +/-
3UIDE
_/OL +/-
16
Operating a DVD player or DVD Changer
To Press
Turn on/off DVDiVCR (POWER)
Control a DVD player DVDiVCR (FUNCTION)
If you have a DVD changer, F 1
to skip disks
Play
Stop •
Pause II (press again to resume
normal playback)
Step through different _ to step forward or
tracks of an audio disc to step backward
Step through different CH + to step forward or CH
chapters of a video disc to step backward
Select a track directly 0-9 buttons
Display the menu (Setup) MENU
Display the top menu TOP MENU
Operate the DVD menu t1', _, _,, *, @
Operating a DVD 5.1 Channel (Sony DAV)
To Press
Turn on/off DVDiVCR (POWER)
Select other equipment F 1
connected to the DAV
Skip a disk F2
Display the DVD menu TOP MENU
Display the menu (Setup) MENU
Move the highlight (Cursor) it, _, _,, *
Select the item @
Change the volume VOL +/ , MUTING
O_
fl)
-q
<
17
Overview of the TV Controls and Connectors
Front Panel Controls and Connectors
To open the drop-down panel
To open the drop-down panel of your TV, push up the panel
door just under the ::_ mark until you hear a click, then the
panel door will open.
Item/Jack Description
[] (IR) Infrared Receiver Receives IR signals from the remote control.
[] _'_ (Timer) LED When lit, indicates one of the timers is set. When the timer is set, this LED will remain lit. For details, see
page 75.
[] _[ (Picture ofl) When lit, indicates that the Picture Off feature is activated. For details, see page 48.
LED
[] (_) (Power) and Press (_) (Power) to turn on and offthe TV. The LED lights up green when the TV is turned on. When in
(_) (Power on/Stand by) standby mode, the LED lights up in red. If the LED blinks continuously, this may indicate the TV needs
LED servicing (see page 77).
[] _) Headphones jack Connects to your hea@hones.
If your headphones do not match the jack, use a suitable plug adaptor (not supplied).
[] S VIDEO IN 2 Connects to the S VIDEO OUT jack on your camcorder or other video equipment that has S VIDEO.
Provides better picture quality than composite video ([_).
[] VIDEOiL-AUDIO-R Connects to the composite AiV output jacks on your camcorder or other video equipment.
VIDEO IN 2
[] INPUT Press repeatedly to cycle through the video equipment connected to the TV's video inputs.
[] VOLUME + Press to adjust the volume.
[] CHANNEL + Press to scan through channels. To scan quickly through channels, press and hold down either CHANNEL.
18
Rear Panel Connectors
i VIDEO -
_I-L(MONO)-
VIDEO IN _HD/DVDI_
I " Y©
CENTERISPEAKER
_-_L(MO AUDIO OUT
I
rQ
-q
<
Jack Description
[] HDMI INiL-AUDIO-R HDMI (High-Definition Multimedia Inter_ace) provides an uncompressed, all-digital audio/video
(HDMI IN 5) interface between this TV and any HDMI-equipped audio/video component, such as a set-top box, DVD
player, and AN receiver. HDMI supports enhanced, or high-definition video, plus nmlti-channel digital
audio.
[] VHFiUHF RF input that connects to your VHFiUHF antenna or cable box.
[] AC IN Connects the supplied AC power cord.
[] S VIDEO IN 1/3 Connects to the S VIDEO OUT jack of your VCR or other video equipment that has S VIDEO. S
VIDEO provides better picture quality than either composite video ([_) or VHF&JHF ([]) connections.
[] VIDEO IN i/3 VIDEO/ Connect to the composite AiV output jacks on your VCR or other video component. A third composite
L-AUDIO-R AiV input jack (VIDEO IN 2) is located on the fi'ont panel of the TV. These video connections provide
better picture quality than the VHFiUHF ([]) connections.
[] HDiDVD IN 4 Y, PB, PRi Connect to your DVD player's or digital set-top box's component video (Y, PB, PR) and audio (L/R)
L-AUDIO-R jacks. Component video provides better picture quality than the S VIDEO ([]), the VHFiUHF ([]) or
the composite video ([]) connections.
[] AUDIO OUT Connects to the left and right audio input jacks of your audio or video equipment. You can use these
(VAR.FIX) LR outputs to listen to your TV's audio through your stereo system.
[] KI CENTER SPEAKER Connect the center output terminals of a Dolby Pro Logic* system decoder amplifier. You can use the
IN 180W (6f2) MAX TV speakers as a center speaker.
* "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.
19
Preventing the TV from Falling Down
After connections with antennas and other equipment are completed, be
sure to attach the supplied clamp screws to the rear of the TV, and pass
a sturdy cord or chain and attach it to a wall or pillar.
1 Remove one of the two screws at the rear of the TV, then attach the
supplied clamp screw to the screw hole.
2 Repeat step 1 to attach the other clamp screw.
3 Attach a sturdy cord or chain securely to each clamp screw, and attach
the cord or chain to a wall or pillar.
2O
Connecting directly to cable or an
antenna
Basic Connections
(Connecting Cable or an
Antenna)
Connector types
You may find it necessary to use some of the
following connector types during set up.
Supplied 75-ohm coaxial cable
Screw-on type
Screw into connection.
S VIDEO cable
High quality video cable for enhanced picture quality
_0 _'_ Align guides and push into
connection.
AUDIO/VIDEO cable
Push into connection.
VIDEO - Yellow
AUDIO (Left) - White
AUDIO (Right) - Red
Some DVD players are equipped with the following
three video connectors:
Y - Green
PB (CB, Cb or B-Y) - Blue
PR (CR, Cl or R-Y) - Red
Push into connection.
VHF only or VHF/UHF or cable
75-ohm coaxial
Rear of TV
cable (supplied) __
VHF/UHF jack
Note
It is strongly recommended to connect the antenna using a 75-
ohm coaxial cable to get optimum picture quality. A 300-ohm
twin lead cable can be easily affected by radio noise and the like,
resulting in signal deterioration. If you use a 300-ohm twin lead
cable, keep it away as tar as possible from the TV.
Cable box connections
Use this hookup if:
• You subscribe to a cable TV system that uses
scrambled or encoded signals requiring a cable
box to view all channels, and
• You do not intend to hook up any other audio or
video equipment to your TV.
1
2
Connect the coaxial connector from your cable
service to the cable box's IN jack.
Using the supplied 75-ohm coaxial cable,
connect the cable box's OUT jack to the TV's
VHF/UHF jack.
75-ohm coaxial
cable (supplied)
Cable
1 _l'_ VHF/UHF jack
IN _ OUT
jack jack
Cable box
Also, set "Cable" to "On" in the _ (Channel)
menu (see page 36).
Tips
• The supplied remote control can be programmed to operate
your cable box (see "Programming the Remote Control" on
page 14).
• To change channels using the cable box, set your TV to
channel 3 or 4 depending on the cable box channel output.
• If you will be controlling all channel selection through your
cable box, consider using the Channel Fix feature to set your
TV to channel 3 or 4 (see page 37).
©
O
5
¢O
_0
o..
O?
¢Q
-4
<
21
Connecting Optional Equipment
Use the instructions in this section to connect the following optional equipment:
If you are connecting See page
VCR and (?able TV 23 page
Satellite Receiver 24 page
Satellite Receiver and VCR 25 page
Audio Receiver 26 page
DVD Player with Component Video Connectors 27 page
DVD Player with S Video and Audio Connectors 28 page
Digital Cable Box 29 page
Digital Satellite Receiver 30 page
Digital Satellite Receiver with HDMI Connector 31 page
DVD Player or Digital Satellite Receiver via AV Receiver 33 page
Cam(order 34 page
Connecting the Power Cord
Complete other connections prior to connecting the power cord.
1 Connect the power cord to the AC IN connector of the TV.
2 Secure the AC power plug to the display's AC IN jack.
AC IN (Power
supply input) AC plug holder ..
jack of the _ (supplied) "-..
display "- "
AC power cord
(supplied)
O Attach the AC plug holder
(supplied) to the AC
power cord.
O Clip on to the AC IN jack
until you hear clicking.
Note
When you unplug the AC power cord, drag the holder down by pushing both sides of the
holder, then pull out the plug.
3 Connect the other plug of the power cord to a wall outlet.
For 120 V AC
Wall outlet 3
AC IN
22
AC power cord (supplied)
Connecting a VCR and Cable TV
Use this hookup if:
• You subscribe to a cable TV system that does not require a cable box.
75-ohm
coaxial cable
(supplied)
Disconnect all power sources before making any connections.
1 Connect the CATV cable to the VCR's IN jack.
2 Using the supplied 75-ohm coaxial cable, connect the VCR's OUT.jack
to the TV's VHF/UHF.jack.
3 Using AUDIO and S VIDEO cables, connect the VCR's AUDIO and S
VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks (VIDEO IN
1 or 3).
75-ohm coaxial 2 LT'_-'_""_
cable (supplied) """"[__
Rear of TV
VCR t
SV EO a e
.-" (not supplied)
S
VIDEO
AUDIO-L
(red)
©
O
o
5
t.Q
Q.
03
g
¢.Q
-4
<
AUDIO cable (not supplied)
Note
,,,When you, cormect. _vide° equipment to both the VIDEO,. and the S VIDEO input jacks, make sure
'Auto YC in the _ (Setup) menu is set to "On' to view the S VIDEO input (see below).
Tips
• You can also use the VIDEO IN 2 jacks located on the fi'ont of the TV to connect your VCR.
• If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S
VIDEO cable.
When connecting both VIDEO IN and S VIDEO IN
Using the menu, you can select the jack from which the TV receives the input
signal. You can set it for each video input (VIDEO IN 1, VIDEO IN 2 and
VIDEO IN 3) separately. The TV is t;actory set to receive S VIDEO input signals.
1 Press VIDEO 1/2/3 repeatedly until the desired video input appears.
2 Press MENU.
3 Press tt/!l, to select _ (Setup), then press (Z).
4 Press tt/ll, to select "Auto YC," then press @.
5 To watch the pictures input from the S VIDEO input jack:
Press tt/ll, to select "On," then press (_.
To watch the pictures input from the VIDEO input ,jack:
Press 4,/11,to select "Oft," then press CZ).
6 Press MENU to exit the menu screen.
23
Connecting a Satellite Receiver
Disconnect all power sources before making any connections.
1 Connect the satellite antenna cable to the satellite receiver's SATELLITE
IN jack.
2 Using AUDIO and S VIDEO cables, connect the satellite receiver' s AUDIO
and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks
(VIDEO IN 1 or 3).
3 Connect the supplied 75-ohm coaxial cable from your cable or antenna to the
TV' s VHF/UHF jack.
Satellite =
a2_2 na I 1
Satellite receiver I
_'_ l S VIDEO
m'_ cable
.'" (not supplied',
AUDIO-R
(red)
75-ohm coaxial 3 /')
cable (supplied) _ { V2F_i
J
Rear of TV ............................
AUDIO cable (not supplied)
Note
When you connect video equipment to both the VIDEO and the S VIDEO input jacks, make
,, ,,
"Auto YC ' in the _ (Setup) menu is set to "On' to view the S VIDEO input
sure
(see page
23).
Tips
• You can also use the VIDEO IN 2 jacks located on the front of the TV to connect your
satellite receiver.
• If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow)
instead of the S VIDEO cable.
• Use VIDEO 1/2/3 on the remote control to select VIDEO IN 1 (or VIDEO IN 3 if you use
the VIDEO IN 3 jacks for this hookup) to watch satellite TV.
24
Connecting a Satellite Receiver and a VCR
Disconnect all power sources before making any connections.
1 Connect the satellite antenna cable to the satellite receiver's SATELLITE
IN jack.
2 Connect the CATV cable to the VCR's VHF/UHF IN jack.
3 Using the supplied 75-ohm coaxial cable, connect the VCR's OUT.jack
to the TV's VHF/UHF.jack.
4 Using AUDIO and S VIDEO cables, connect the satellite receiver's
AUDIO and S VIDEO OUT.jacks to the VCR's AUDIO and S VIDEO
IN jacks.
5 Using AUDIO and S VIDEO cables, connect the VCR's AUDIO and S
VIDEO OUT.jacks to the TV's AUDIO and S VIDEO IN jacks (VIDEO
IN 1 or 3).
S VIDEO cable
(not supplied)
VCR
_,,,,,,,,,,,AUDIO cable
supplied)
3
75-ohm coaxial
cable (supplied)
S VIDEO
cable
_5 (not supplied)
S VIDEO
VIDEO
(yellow) --
AUDIO-L
(white)
_,UDIOIR
(red)
AUDIO cable
(not supplied)
75-ohm coaxial v
cable (supplied) _ _,,!
Rear of TV
O
o
o
5
t.Q
O._
03
tQ
-4
<
Note
When you cormect video equipment to both the VIDEO and the S VIDE() input jacks, make
,, . ,,
"Auto YC ' in the _ (Setup) menu is set to 'On to view the S VIDEO input
sure (see
page
23).
Tips
• You can also use the VIDEO IN 2 jacks located on the front of the TV to connect your
VCR.
• Be sure your VCR's video input is set correctly. Consult your VCR's operating manual for
instructions.
• Use VIDEO 1/2/3 on the remote control to select VIDEO IN 1 (or VIDEO IN 3 if you use
the VIDEO IN 3jacks lbr this hookup) to watch satellite TV or to watch a tape on the VCR
(your VCR must be turned on).
• If your VCR or satellite receiver is not eqnipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
25
Loading...