Sony KDL-40NX703, KDL-40NX803, KDL-46NX703, 4-180-179-14(1) User Manual

4-180-179-14(1)

LCD Digital Colour TV

Operating Instructions

Setting Up

Watching TV

Additional Information

KDL-55NX813 / 52NX803 / 46NX713 / 46NX703 / 40NX803 / 40NX713 / 40NX703

NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM

A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug s upplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

Notes on Digital TV function

• Any functions related to Digital TV

( ) will only work in countries or areas where DVB-T (MPEG-2 and H.264/MPEG-4 AVC) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG2 and H.264/MPEG-4 AVC) cable service. Please confirm with your local dealer if you can receive a DVB-T signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV.

• Your cable provider may charge a fee for

their services, or require you to agree to its terms and conditions of business.

• This TV set complies with DVB-T and

DVB-C specifications, but compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts are not guaranteed.

• Some Digital TV functions may not be

available in some countries/areas and DVB-C cable may not operate correctly with some providers.

For a list of compatible cable providers, refer to the support web site:

http://support.sony-europe.com/TV/ DVBC/

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

“BRAVIA” and are trademarks of Sony Corporation.

“XMB” and “xross media bar” are trademarks of Sony Corporation and Sony Computer Entertainment Inc.

FUSE

How to replace the fuse

Open the fuse compartment with a blade screwdriver, and replace the fuse. Please refer to the illustration that actually equipped with the product.

Introduction

Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

• Instructions about “Installing Wall

Mount Bracket” are included within this TV’s instructions manual.

• The illustrations used in this manual are

of the KDL-40NX803 series unless otherwise state.

• The illustrations of the remote used in

this manual are of the RM-ED030 unless otherwise stated.

Trademark information

is a registered trademark of the DVB

Project.

HDMI, the HDMI Logo, and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

DLNA

, the DLNA Logo and DLNA CERTIFIED marks, or certification marks of the Digital Living Network Alliance.

DivX technology, developed by DivX, Inc.

DivX logos are registered trademarks of DivX, Inc. and are used under license.

ABOUT DIVX VIDEO: DivX digital video format created by DivX,Inc.

This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified registered in order to play DivX Video-onDemand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

are trademarks, service

is a video file compression

, DivX Certified® and associated

is a

device must be

Notice for Wireless Signal

1. Hereby, Sony, declares that this unit is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

To obtain the declaration of conformity (DoC) for R&TTE Directive, please access the following URL address.

http://www.compliance.sony.de/

2. Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives.

TV wireless system may be operated in following countries:

Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, The Netherlands, Norway, Poland, Portugal, Slovak Republic, Romania, Slovenia, Spain, Sweden, Switzerland, Turkey, and The United Kingdom.

This equipment can be operated in other non-European countries.

Location of the identification label

Labels for Model No. and Power Supply rating (in accordance with applicable safety regulation) are located on the rear of the TV. For KDL-NX803 series models, they can be found by removing the bottom cover.

Table of Contents

Checking the accessories ..............................................................................................................4

Inserting batteries into the remote .................................................................................................4

Setting Up

Attaching the Table-Top Stand ......................................................................................................5

Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD recorder)..................................7

Preventing the TV from toppling over ............................................................................................8

Bundling the cables........................................................................................................................8

Performing the initial set-up ...........................................................................................................9

Detaching the Table-Top Stand from the TV .................................................................................9

Watching TV

To watch programmes .................................................................................................................10

To utilise the TV’s features ..........................................................................................................10

To use i-Manual ...........................................................................................................................11

Additional Information

Troubleshooting...........................................................................................................................12

Specifications...............................................................................................................................13

Installing the Accessories (Wall-Mount/Wall-Hanging Bracket)...................................................16

Safety Information........................................................................................................................22

Precautions..................................................................................................................................23

• Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for operation (page 11).

• Before operating the TV, please read “Safety Information” (page 22). Retain this manual for future reference.

Checking the accessories

For all models

Remote (1) Size AAA batteries (R3 type) (2) Table-Top Stand (1)*

For KDL-52/40NX803, KDL-46/ 40NX703 models

AC power cord (mains lead) (1) Cable holder (1) Stand rear cover (1) Black spacers (4) Fixing screws for Table-Top Stand (M5 × 16) (4) Assembling screws for Table-Top Stand (M5 × 16) (4)

40NX703 only)

For KDL-55NX813, KDL-46/40NX713 models

Hexagon wrench (1) Assembling screws for Table-Top Stand

(KDL-55NX813, KDL-46NX713 only)

(4) Assembling screws for Table-Top Stand (2)

(KDL-40NX713 only)

SCART Adaptor (1)

* Disassembled except for KDL-52NX803 and

KDL-46NX703. Refer to the supplied Table-Top Stand leaflet to assemble the stand.

(KDL-52/40NX803 only)

(KDL-40NX803 and KDL-

Inserting batteries into the remote

1 Remove the protection sheet. 2 Push and slide the cover upward.

Setting Up

Attaching the Table-Top Stand

Refer to the supplied Table-Top Stand leaflet for proper attachment for some TV models.

• For best picture quality, do not expose the screen

to direct illumination or sunlight.

• If the TV is brought directly from a cold to a warm

location, or is placed in a very damp room, or is placed in a room in which heating has just been turned on, moisture may condense on the surface or inside the TV. Should this occur, turn off the TV and leave the TV off until the moisture evaporates, and then the TV can be used. If you notice moisture condensation between the glass panel and the LCD, turn on the TV and the condensation will evaporate after the TV has warmed up.

For KDL-52/40NX803, KDL-46/ 40NX703

1 Place the TV set on the Table-Top

Stand.

3 After all the screws are tightened,

attach the supplied stand rear cover to the Table-Top Stand.

For KDL-55NX813, KDL-46/40NX713

1 Align with the two dowels of the Table-

Top Stand, and gently place the TV, checking the f mark is facing the front.

Setting Up

2 Fix the TV to the Table-Top Stand

according to the arrow marks that guide the screw holes using the supplied screws.

• If using an electric screwdriver, set the tightening

torque at approximately 1.5 N·m {15 kgf·cm}.

2 Attach the TV and Table-Top Stand

with the supplied screw and hexagon wrench.

• Set the torque setting to approximately 3 N·m {30

kgf·cm}.

Reattaching the Table-Top Stand to the TV

Attach to the original position using the removed screws. See “Detaching the TableTop Stand form the TV” (page 9).

(Continued)

Adjusting the viewing angle of the TV

This TV can be adjusted within the angles shown below.

• To return to 0°, reverse the above procedure.

For KDL-52/40NX803, KDL-46/ 40NX703

6º0º

For KDL-55NX813, KDL-46/40NX713

6º0º

Remove screw as shown.

Install screw into the top screw hole of the Table-Top Stand.

Slide in.Lift up and tilt.

Connecting an antenna (aerial)/Set Top Box/ recorder (e.g. DVD recorder)

Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART

For KDL-52/40NX803, KDL-46/40NX703

For KDL-55NX813, KDL-46/40NX713

SCART adaptor (supplied)

Setting Up

Set Top Box/recorder (e.g. DVD recorder)

Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI

Set Top Box/recorder (e.g. DVD recorder)

• Right Angle Type Universal SCART Lead is

recommended for this connection.

Set Top Box/recorder (e.g. DVD recorder)

• For KDL-52/40NX803, after connecting cables,

install the bottom cover and stand rear cover.

Preventing the TV from toppling over

Bundling the cables

• Do not bundle the AC power cord (mains lead)

together with other cables.

For KDL-52/40NX803, KDL-46/ 40NX703

1 Install a wood screw (4 mm in

diameter, not supplied) in the TV stand.

2 Install a machine screw (M4 × 16, not

supplied) into the screw hole of the TV.

3 Tie the wood screw and the machine

screw with a strong cord (not supplied).

*KDL-52/40NX803 only

For KDL-55NX813, KDL-46/40NX713

Performing the initial set-up

KDL-55NX813, KDL-46/40NX713

KDL-52/ 40NX803

KDL-46/ 40NX703

1 Connect the TV to your AC power

outlet (mains socket).

2 Check the ENERGY SAVING

SWITCH setting is on (

z).

3 Press 1 on the TV.

When you switch on the TV for the first time, the Language menu appears on the screen.

Programme Sorting: Changes the order of analogue channels stored in the TV.

1 Press F/f to select the channel you want

to move to a new position, then press .

2 Press F/f to select the new position for

the channel, then press .

• You can also tune channels manually.

Setting Up

Detaching the Table-Top Stand from the TV

• Remove the screws guided by the arrow marks

of the TV.

• Do not remove the Table-Top Stand for any

reason other than to install corresponding accessories on the TV.

• Be sure the TV is on the vertical position before

switching on. TV set must not powered on with LCD panel face down to avoid uneven picture uniformity.

For KDL-52/40NX803, KDL-46/ 40NX703

Follow the instructions on the screen.

Digital Auto Tuning: When you select “Cable”, we recommend that you select “Quick Scan” for quick tuning. Set “Frequency” and “Network ID” according to the information supplied from your cable provider. If no channel is found using “Quick Scan”, try “Full Scan” (though it may take some time). For a list of compatible cable providers, refer to the support web site: http://support.sony-europe.com/TV/ DVBC/

For KDL-55NX813, KDL-46/40NX713

Joint

+ 19 hidden pages