Sony KDE-P47XS1, KDE-P42XS1 Quick Start Manual

KDE-P37XS1

Checking the

Connecting the AC

Stabilizing the TV set

KDE-P42XS1

Thank you for purchasing this Sony product.

After following this step by step guide you will be able to:

Insert Batteries into the Remote Control.

Connect the AC Cable, Aerial and VCR to your TV.

Stabilize the TV set.

Tune your TV.

Accessories Supplied

1 Remote control (RM-Y1011): 2 Batteries (AA size): 2 Coaxial Cables:

2 Anchor attachments: 1 Cleaning Cloth: 1 AV Mouse:

1 Mains Lead (Type BF):

Do not remove ferrite cores.

1 Clamp Belt: 1 “Notes on the Plasma TV” book.

Notes on the Plasma TV

English..............2

Cable, Aerial and VCR

• Use the supplied mains lead (Type BF, see step 1).

• Use one of the supplied coaxial cables for aerial connection, and the other one for digital connection.

Connecting an aerial

4-092-684-01(1)

Connecting a VCR with an aerial

VCR

OUTIN

After setting up, secure the TV set to a wall, pillar, etc, using the supplied anchor attachments, for a safety purposes.

1 Remove the two screws attached to the upper rear side of te TV set.

2 Replace the two screws with the two supplied anchor attachments.

3 Secure a wall anchor bracket (not supplied) to a solid wall or a pillar.

4 Pass a strong cord or chain trough both holes of the anchor attachments and then secure to a wall

or pillar, etc.

Do not connect to the mains before all connections are complete.

Change the broadcast channels into a different order.

View TV Programmes.

Use the basic functions of the Remote Control.

Inserting Batteries into the Remote Control

Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmentally friendly way.

Do not connect to the mains before all connections are complete.

• The Scart lead is optional, however if you use a Scart lead to connect your VCR it can improve picture and sound quality when using it.

• For more details of VCR connection, please refer to the section “Connecting Optional Equipment” on page 50 of the instruction manual.

If you do not have a Scart lead, after automatically tuning the TV, tune in the VCR test signal to the TV programme number “0” by using the “Manual Programme Preset” option. (for details of how to manually programme these presets, see page 32, step A of the instruction manual). Refer to your VCR instruction manual to find out how to find the output channel of your VCR.

Quick Start Guide

Ecological Paper - Totally Chlorine Free

4-103-039-11 (1)

Printed in Spain

Switching on the set

DIGITAL

Automatically Tune the TV

You need to tune the TV to receive channels (TV Broadcast). By following the instructions below, this set automatically searches and stores all available channels for you.

Changing the Programme Order of the analogue channels

By following the instrutions below, you can rearrange the order in which the analogue channels appear on the screen.

Basic overview of the Remote Control

1 Connect the TV plug to the mains socket

(220-240V AC, 50Hz).

2 The first time that the TV set is connected, it

is usually turned on. If the TV is off, press the

on/off button on the TV set to turn on the

TV.

The first time you press the Power switch,

Please connect your equipment according to this chart

DVD

Do you want to start

automatic tuning?

Yes No

a diagram showing you how to connect equipment to your TV set appears on the TV screen. Follow the instructions and finally press the OK button to remove the picture and continue the automatic tuning process.

The connection diagram should be used as a guide only as most equipment can be connected to more than one type of TV socket. Once the TV has completed the automatic tuning process, refer to the ‘Connection Guide’ section on page 27 of the instruction manual for further information on getting the best set up for your equipment.

1 Press the OK button on the remote control

to select Yes.

2 The TV starts to automatically search and

a/DIGITAL

Auto Tuning

The number of stored services 16

0% 100%

Searching. . . 63 %

Press Blue key to cancel Auto Tuning.

Auto Tuning

Programmes found: 4

No channel found.

Please connect aerial

Confirm

Programme Sorting

TVE

TVE2

TV3

C33

C27

C58

S02

S06

Cancel

store all available broadcast channels for you as follows:

a) The Digital autotune display appears on

screen and the search and store procedure begins. All the available Digital channels will now be captured and stored. As this may take some time, a message is included in the display to inform you of the tuning progress.

b) When Digital tuning is complete, the

analogue display appears automatically and the search and store procedure for the analogue channels begins.

•This procedure could take some minutes.

Please be patient and do not press any

buttons, otherwise automatic tuning will not

be completed.

• If no Digital and no Analogue channels were found during the auto tuning process then a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (see page 15) and press OK. The auto tuning process will start again.

• Once all Digital and Analogue channels have been captured and stored, the TV returns to normal operation and displa ys the first Digital channel tuned.

captured, the Analogue channel that is stored on channel number 1 is displayed.

When the auto tuning is finished, the Programme Sorting menu appears on the screen (only if the TV has captured analogue channels).

If no Digital channels are

stored in your television’s memory.

a) If you wish to keep the analogue channels in

the tuned order:

Programme Sorting

TVE

TVE2

TV3

C33

C27

C58

S02

S06

Press the MENU button on the remote control to exit and return to the normal TV screen.

Your set is now ready for use.

b) If you wish to store the analogue channels in a

different order:

Programme Sorting

TVE

TVE2

TV3

C33

C27

C58

S02

S06

1 Press the or button to select the

programme number with the channel (TV Broadcast) you wish to rearrange, then press the button.

Programme Sorting

TVE

TVE2

TV3 04 05 06 07 08

01 TVE

C33

C27

C58

S02

S06

Your television stations are now

2 Press the or button to select the new

programme number position for your selected channel (TV Broadcast), then press .

The selected broadcast channel now moves to its new programme position and the other broadcast channels move accordingly.

3 Repeat steps 1) and 2) if you wish to change

the order of the other channels.

4 Press the MENU button on the remote

control to exit and return to the normal TV screen.

The TV set is now ready for use.

To Press

Select channels... PROG +/- or Numbered buttons.

When selecting double digit numbers using the Numbered buttons, press enter the second digit within two seconds.

Adjust the volume... 2 +/- buttons.

Mute the sound... % button. Press again to cancel.

Turn off the TV temporarily... TV I/1 button on the remote control. When the

TV is in standby mode, the 1 indicator on the TV is lit red. Press the TV I/1 button again to return to normal TV operation.

Switch to Digital mode... DIGITAL button.

Switch to Analogue mode... a button.

Change the screen mode... button.

Watch pictures from equipment connected to the TV´s front and rear sockets (video input mode)...

Access text services (depending on availability of service) ..

Return to normal TV operation (from text, video input mode etc.)...

Please refer to the main instruction manual

for a complete overview of the remote control.

t button repeatedly until the picture appears.

/ button.

a button.

Sony KDE-P47XS1, KDE-P42XS1 Quick Start Manual

Specifications and Main Features

Frequently Asked Questions

User Manual