In this set, HP-AMP, JA CK, MAIN, POWER HT and SP boards hav e been
changed in the midway of production.
Printed wiring boards, schematic diagrams and electrical parts list of
new type are described in this supplement-1.
Refer to original service manual for other information.
2-5. Schematic Diagram – MAIN Section (1/2) –.................. 8
2-6. Schematic Diagram – MAIN Section (2/2) –.................. 9
2-7. Printed Wiring Board – MAIN Section – ........................ 10
AEP Model
HCD-DH5BT
E Model
Australian Model
Chinese Model
HCD-DH3/DH5BT
9-887-629-81
3.ELECTRICAL PARTS LIST................................ 11
HCD-DH3/DH5BT/DH7BT
1. NEW/FORMER DISCRIMINATION
– MAIN Board (Component Side) –
Former : 1-873-260-11
New: 1-873-260-13
– JACK Board (Component Side) –
Former : 1-873-264-11
New: 1-873-264-13
– HP-AMP Board (Component Side) –
Former : 1-873-265-11
New: 1-873-265-13
– POWER HT Board (Component Side) –
– SP Board (Component Side) –
Former : 1-873-267-11
New: 1-873-267-13
Former : 1-873-263-11
New: 1-873-263-13
2
2.DIAGRAMS
• Note for Printed Wiring Boards and Schematic Diagrams
HCD-DH3/DH5BT/DH7BT
Ver. 1.2
Note on Printed Wiring Board:
• X : parts extracted from the component side.
• Y : parts extracted from the conductor side.
f
•
•: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
• Indication of transistor
: internal component.
C
Q
B
E
Q
B
CE
These are omitted.
These are omitted.
Note on Schematic Diagram:
• All capacitors are in µF unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and
specified.
•f: internal component.
• C : panel designation.
Note:
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part
number specified.
• A : B+ Line.
• Voltages are dc with respect to ground under no-signal
conditions.
no mark : TUNER (FM/AM)
(): DVD PLAY
[]: XM
〈〈 〉〉 : SIRIUS
∗: Impossible to measure
• Voltages are taken with a V OM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production tolerances.
• Signal path.
I : DIGITAL OUT
F: AUDIO
f: TUNER (FM/AM)
d: USB
: XM
O: SIRIUS
h : AUDIO IN
N: MIC
• Abbreviation
AUS: Australian model
CH: Chinese model
CND : Canadian model
KR: Korean model
RU: Russian model
SP: Singapore model
TH: Thai model
TW: Taiwan model
1
4
/
W or less unless otherwise
Note:
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro
spécifié.