Sony DWR-R01D Operating Instructions Manual
Sony Corporation
Printed in Japan
Digital Wireless
Receiver
Operating Instructions
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
DWR-R01D
4-177-125-17 (1)
© 2010 Sony Corporation
The supplied CD-ROM includes Operating Instructions for the DWR-R01D Digital
Wireless Receiver (English, Japanese, French, German, Italian, and Spanish
versions) and the frequency lists (English and Japanese versions) in PDF format.
For more details, see “Using the CD-ROMs” on page 10.
Important Safety Instructions
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
• Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
• Only use attachments/accessories specified by the
manufacturer.
• Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution
when moving the cart/apparatus combination
to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
This symbol is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the
appliance.
CAUTION
The apparatus shall not be exposed to dripping or
splashing. No objects filled with liquids, such as vases,
shall be placed on the apparatus.
WARNING
Excessive sound pressure from earphones and headphones
can cause hearing loss.
In order to use this product safely, avoid prolonged
listening at excessive sound pressure levels.
WARNING
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
WARNING
THIS APPARATUS MUST BE EARTHED.
2
Suomessa asuville asiakkaille
Laite on liitettävä suojamaadoituskoskettimilla
varustettuun pistorasiaan
For kundene i Norge
Apparatet må tilkoples jordet stikkontakt
För kunderna i Sverige
Apparaten skall anslutas till jordat uttag
For the customers in the U.S.A.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
All interface cables used to connect peripherals must be
shielded in order to comply with the limits for a digital
device pursuant to Subpart B of Part 15 of FCC Rules.
If you have any questions about this product, you may call;
Sony Customer Information Service Center 1-800-2227669 or http://www.sony.com/
Declaration of Conformity
Trade Name: SONY
Model: DWR-R01D
Responsible party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego, CA
92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
For the customers in Canada
Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device
must accept any interference, including interference that
may cause undesired operation of the device.
The term “IC:” before the radio certification number only
signifies that Industry Canada technical specifications
were met.
Use of Sony wireless devices is regulated by the Industry
Canada as described in their Radio Standard Specification
RSS-123.
A licence is normally required. The local district office of
Industry Canada should therefore be contacted. When the
operation of the device is within the broadcast band, the
licence is issued on no-interference, no-protection basis
with respect to broadcast signals.
This Class B digital apparatus complies with Canadian
ICES-003.
AVERTISSEMENT
Afin de réduire les risques d’incendie ou
d’électrocution, ne pas exposer cet
appareil à la pluie ou à l’humidité.
Afin d’écarter tout risque d’électrocution,
garder le coffret fermé. Ne confier
l’entretien de l’appareil qu’à un personnel
qualifié.
AVERTISSEMENT
CET APPAREIL DOIT ÊTRE RELIÉ À LA TERRE.
ATTENTION
Eviter d’exposer l’appareil à un égouttement ou à des
éclaboussures. Ne placer aucun objet rempli de liquide,
comme un vase, sur l’appareil.
AVERTISSEMENT
Une pression acoustique excessive en provenance des
écouteurs ou du casque peut provoquer une baisse de
l’acuité auditive.
Pour utiliser ce produit en toute sécurité, évitez l’écoute
prolongée à des pressions sonores excessives.
Pour les clients au Canada
L’utilisation doit répondre aux deux conditions suivantes :
(1) ce matériel ne doit pas provoquer de brouillage et (2) il
doit accepter tout brouillage, même celui qui est
susceptible d’affecter son fonctionnement.
La mention « IC: » devant le numéro de certification/
homologation signifie uniquement que les spécifications
techniques d’Industrie Canada sont remplies.
L’usage des appareils sans fil Sony est réglementé par
l’Industrie Canada comme décrit dans leur Cahier des
Normes Radioélectriques CNR-123.
Une licence est normalement requise.
3
Le bureau de l’Industrie Canada doit être contacté.
Lorsque le fonctionnement de l’appareil respecte les
limites de la bande de radiodiffusion, la licence est
accordée sur la base d’une non-interférence, nonprotection pour les signaux de radiodiffusion.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
WARNUNG
Um die Gefahr von Bränden oder
elektrischen Schlägen zu verringern, darf
dieses Gerät nicht Regen oder
Feuchtigkeit ausgesetzt werden.
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE: To comply with the FCC RF
exposure compliance requirements, no change to the
antenna or the device is permitted,
Any change to the antenna or the device could result in the
device exceeding the RF exposure requirements and void
user’s authority to operate this device.
This device complies with FCC radiation exposure limits
set forth for uncontrolled equipment and meets the FCC
radio frequency (RF) Exposure Guidelines in Supplement
C to OET65. This device has very low levels of RF energy
that it is deemed to comply without testing of specific
absorption radio (SAR).
Um einen elektrischen Schlag zu
vermeiden, darf das Gehäuse nicht
geöffnet werden. Überlassen Sie
Wartungsarbeiten stets nur qualifiziertem
Fachpersonal.
WARNUNG
DIESES GERÄT MUSS GEERDET WERDEN.
VORSICHT
Das Gerät ist nicht tropf- und spritzwassergeschützt. Es
dürfen keine mit Flüssigkeiten gefüllten Gegenstände, z.
B. Vasen, darauf abgestellt werden.
WARNUNG
Zu hoher Schalldruck von Ohrhörern und Kopfhörern
kann Gehörschäden verursachen.
Um dieses Produkt sicher zu verwenden, vermeiden Sie
längeres Hören bei sehr hohen Schalldruckpegeln.
This model has an RF module of the FCC/IC
approval built-in
BUILT IN MODULE RM-223
FCC-ID: AK8RM223
IC: 409B-RM223
For the customers in Canada
Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device
must accept any interference, including interference that
may cause undesired operation of the device.
The term “IC:” before the radio certification number only
signifies that Industry Canada technical specifications
were met.
Ce modèle dispose d’un module à
radiofréquence (RF) intégré qui a été certifié par
la FCC/IC.
MODULE INTÉGRÉ RM-223
ID FCC : AK8RM223
IC : 409B-RM223
Pour les clients au Canada
L’utilisation doit répondre aux deux conditions suivantes :
(1) ce matériel ne doit pas provoquer de brouillage et (2) il
doit accepter tout brouillage, même celui qui est
susceptible d’affecter son fonctionnement.
La mention « IC: » devant le numéro de certification/
homologation signifie uniquement que les spécifications
techniques d’Industrie Canada sont remplies.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
For the customers in the U.S.A.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
4
For the customers in Europe
Hereby, Sony Corporation, declares that this DWR-R01D
is in compliance with the essential requirements and other
relevant provisions of the Directive 1999/5/EC.
For details, please access the following URL:
http://www.compliance.sony.de/
Para clientes na Europa
Sony Corporation declara que este DWR-R01D está
conforme com os requisitos essenciais e outras disposições
da Directiva 1999/5/CE.
Para mais informacoes, por favor consulte a seguinte URL:
http://www.compliance.sony.de/
Pour les clients en Europe
Par la présente Sony Corporation déclare que l’appareil
DWR-R01D est conforme aux exigences essentielles et
aux autres dispositions pertinentes de la directive 1999/5/
CE.
Pour toute information complémentaire, veuillez consulter
l’URL suivante: http://www.compliance.sony.de/
Für Kunden in Europa
Hiermit erklärt Sony Corporation, dass sich das Gerät
DWR-R01D in Übereinstimmung mit den grundlegenden
Anforderungen und den übrigen einschlägigen
Bestimmungen der Richtlinie 1999/5/EG befindet.
Weitere Informationen erhältlich unter:
http://www.compliance.sony.de/
Per i clienti in Europa
Con la presente Sony Corporation dichiara che questo
DWR-R01D è conforme ai requisiti essenziali ed alle altre
disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Per ulteriori dettagli, si prega di consultare il seguente
URL: http://www.compliance.sony.de/
Til europæiske kunder
Undertegnede Sony Corporation erklærer herved, at
følgende udstyr DWR-R01D overholder de væsentlige
krav og øvrige relevante krav i direktiv 1999/5/EF.
For yderligere information gå ind på følgende
hjemmeside: http://www.compliance.sony.de/
Asiakkaille Euroopassa
Sony Corporation vakuuttaa täten että DWR-R01D
tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen.
Halutessasi lisätietoja, käy osoitteessa:
http://www.compliance.sony.de/
For kunder i Europa
Sony Corporation erklærer herved at utstyret DWR-R01D
er i samsvar med de grunnleggende krav og øvrige
relevante krav i direktiv 1999/5/EF.
For flere detaljer, vennligst se:
http://www.compliance.sony.de/
Para los clientes de Europa
Por medio de la presente Sony Corporation declara que el
DWR-R01D cumple con los requisitos esenciales y
cualesquiera otras disposiciones aplicables o exigibles de
la Directiva 1999/5/CE.
Para mayor información, por favor consulte el siguiente
URL: http://www.compliance.sony.de/
Voor de klanten in Europa
Hierbij verklaart Sony Corporation dat het toestel DWRR01D in overeenstemming is met de essentiële eisen en de
andere relevante bepalingen van richtlijn 1999/5/EG.
Nadere informatie kunt u vinden op:
http://www.compliance.sony.de/
För kunder i Europa
Härmed intygar Sony Corporation att denna DWR-R01D
står I överensstämmelse med de väsentliga egenskapskrav
och övriga relevanta bestämmelser som framgår av
direktiv 1999/5/EG.
För ytterligare information gå in på följande hemsida:
http://www.compliance.sony.de/
Για τους πελάτες που διαμένουν σε χώρες
της Ευρώπης
Με την παρούσα η Sony Corporation δηλώνει τι
DWR-R01D συμμορφώνεται προς της ουσιώδεις
απαιτήσεις και τις λοιπές σχετικές διατάξεις της
οδηγίας 1999/5/ΕΚ.
Για λεπτομέρειες παρακαλούμε πως ελένξετε
την ακλουθη σελίδα του διαδικτύου:
http://www.compliance.sony.de/
Pro zákazníky v Evropě
Sony Corporation tímto prohlašuje, že tento DWRR01D je ve shodě se základními požadavky a dalšími
příslušnými ustanoveními směrnice 1999/5/ES.
Podrobnosti lze získat na následující URL:
http://www.compliance.sony.de/
5
Klientidele Euroopas
Sony Corporation kinnitab käesolevaga seadme DWRR01D vastavust 1999/5/EÜ direktiivi põhinõuetele ja
nimetatud direktiivist tulenevatele teistele asjakohastele
sätetele.
Üksikasjalikum info: http://www.compliance.sony.de/.
Za stranke v Evropi
Sony Corporation izjavlja, da je ta DWR-R01D v
skladu z bistvenimi zahtevami in ostalimi relevantnimi
določili direktive 1999/5/ES.
Za podrobnosti vas naprošamo, če pogledate naURL:
http://www.compliance.sony.de/
Európai ügyfeleinknek
Alulírott, Sony Corporation nyilatkozom, hogy a(z)
DWR-R01D megfelel a vonatkozó alapvető
követelményeknek és az 1999/5/EC irányelv egyéb
előírásainak.
További információkat a következő weboldalon
találhat: http://www.compliance.sony.de/
Dla klientów w Europie
Niniejszym Sony Corporation oświadcza, że DWRR01D jest zgodne z zasadniczymi wymaganiami oraz
innymi
stosownymi postanowieniami Dyrektywy 1999/5/WE.
Szczegółowe informacje znaleźć można pod
następującym adresem URL:
http://www.compliance.sony.de/
For the customers in the U.S.A.
SONY LIMITED WARRANTY
http://www.sony.com/psa/warranty
information and complete terms and conditions of
Sony’s limited warranty applicable to this product.
For the customers in Canada
SONY LIMITED WARRANTY
http://www.sonybiz.ca/solutions/Support.do
important information and complete terms and
conditions of Sony’s limited warranty applicable to this
product.
For the customers in Europe
Sony Professional Solutions Europe - Standard Warranty
and Exceptions on Standard Warranty.
Please visit http://www.pro.sony.eu/warranty
important information and complete terms and
conditions.
For the customers in Korea
SONY LIMITED WARRANTY
http://bpeng.sony.co.kr/handler/BPAS-Start
important information and complete terms and
conditions of Sony’s limited warranty applicable to this
product.
Pour les clients au Canada
GARANTIE LIMITÉE DE SONY
http://www.sonybiz.ca/solutions/Support.do
obtenir les informations importantes et l’ensemble des
termes et conditions de la garantie limitée de Sony
applicable à ce produit.
- Please visit
for important
- Please visit
for
for
- Please visit
for
- Rendez-vous sur
pour
Pentru clienţii din Europa
Prin prezenta, Sony Corporation declară că acest
DWR-R01D respectă cerinţele esenţiale și este în
conformitate cu prevederile Directivei 1995/5/EC.
Pentru detalii, vă rugăm accesaţi următoarea adresă:
http://www.compliance.sony.de/
Pre zákazníkov v Európe
Sony Corporation týmto vyhlasuje, že DWR-R01D
spĺňa základné požiadavky a všetky príslušné
ustanovenia Smernice 1999/5/ES.
Podrobnosti získate na nasledovnej webovej adrese:
http://www.compliance.sony.de/
6
Table of Contents
Features .......................................................9
Using the CD-ROMs ..................................10
Supplied CD-ROM “Wireless Studio”....... 10
Supplied CD-ROM “Digital Wireless
Receiver”........................................... 11
Trademarks ................................................. 11
Parts Identification....................................12
Front Panel.................................................. 12
Rear Panel................................................... 15
Preparation ................................................17
Rack Mounting ........................................... 17
System Configuration Examples .............18
Using the Supplied Antennas...................... 18
Configuration Example of Multi-Channel
System ............................................... 20
Configuration Example of ST Remote
System ............................................... 23
Configuration Example of NT Remote
System ............................................... 24
Setting the Receiving Channel.................25
Selecting the Group/Channel...................... 25
Using the Active Channel Scan Function... 25
Using the Clear Channel Scan Function..... 26
Using the Encrypted Transmission
Function ..............................................27
Using Secure Key Mode
(SECURE KEY)................................ 27
Using Password Mode (PASSWORD)....... 27
Menu Displays and Detailed Settings......28
Menu Structure and Hierarchy.................... 28
Basic Menu Operations............................... 28
RECEIVER Menu........................................29
Group/channel Selection (GP/CH) ............. 29
Active Channel Scanning Function
(ACTIVE CH SCAN) ....................... 29
Clear Channel Scan Function (CLEAR CH
SCAN)............................................... 29
Encrypted Transmission Function
(ENCRYPTION)............................... 30
Setting Analog Audio Output Level
(BAL OUT LEVEL) ......................... 30
TRANSMITTER (Transmitter Virtual)
Menu ....................................................30
Display of the Transmitter Name
(NAME) ............................................ 30
Display of the Power Save Setting
(POWER SAVE)............................... 31
Display of the Transmission Power Setting
(RF POWER) .................................... 31
Display of Audio Input Level (INPUT
LEVEL)............................................. 31
Display of the Attenuator (ATT) ................ 31
Display of the Low-cut Filter Setting
(LCF)................................................. 31
Display of the +48 V Power Setting
(+48V) ............................................... 31
Display of Accumulated Transmitter Use
Time (TIME)..................................... 31
Display of Internal Signal Generation
(INTERNAL SG) .............................. 31
POWER Switch Lock
(PWR SW LOCK)............................. 31
POWER Switch Status
(PWR SW STATE) ........................... 31
RF REMOTE Menu.....................................31
Using the Cross Remote (RF REMOTE) ... 31
Pairing With a Transmitter (PAIRING) ..... 31
Displaying the Remote Mode (MODE)...... 33
UTILITY Menu ............................................33
Items Related to Signal Reception
(RF submenu).................................... 33
Items Related to Audio
(AUDIO submenu)............................ 34
Items Related to Network (NETWORK
submenu) ........................................... 34
Items Related to Alerts (ALERT
FUNCTION submenu)...................... 34
Items Related to Display (DISPLAY
submenu) ........................................... 35
Resetting Parameters to Their Factory
Settings (FACTORY PRESET) ........ 35
Displaying the Software Version
(VERSION)....................................... 35
Changing the Settings on the
Transmitter..........................................36
Group/channel Setting (GP/CH)................. 36
Transmitter Name Setting (NAME) ........... 36
Power-saving Setting (POWER SAVE)..... 36
Transmission Power Setting
(RF POWER) .................................... 36
Audio Input Level Setting
(INPUT LEVEL)............................... 36
Attenuator Setting (ATT) ........................... 36
Table of Contents
7
Low-cut Filter Setting (LCF)...................... 36
+48 V Power Setting (+48V)...................... 36
Resetting Accumulated Transmitter Use
Time (TIME)..................................... 36
Internal Signal Setting (INTERNAL SG)... 36
POWER Switch Lock Setting (PWR SW
LOCK)............................................... 36
Block Diagram ...........................................37
When the Alert Indicator Lights...............38
Error Messages .........................................39
Troubleshooting........................................40
Important Notes on Operation .................41
Notes on Using the Receiver ...................... 41
On cleaning................................................. 41
Specifications............................................42
Carrier Frequencies and Channel
Steps....................................................43
8
Table of Contents
Features
The DWR-R01D Digital Wireless Receiver is a rackmountable wireless receiver capable of receiving two
channels from digital wireless transmitters.
This receiver enables the application of multiple channels
over unused television channels through the use of the
built-in Sony original channel plan.
What is DWX?
DWX refers to Sony’s new digital wireless microphone
system. The DWX series reflects Sony’s extensive
expertise in professional microphones and sound design. It
represents a successful blend of Sony know-how, wireless
technology renowned for stability, and cutting-edge digital
audio technology.
In addition to realizing the high sound quality possible
with a digital system, the DWX series supports multichannel simultaneous operation, encrypted transmission,
and metadata transmission for monitoring the status of
multiple transmitters. Using a main link and a separate
additional link, remote control of transmitters from the
receiver is also possible. With its many advanced features,
the system has the potential to revolutionize the workflow
of professional applications.
What is WiDIF-HP?
WiDIF-HP (WiDIF: Wireless Digital Interface Format,
HP: High Profile) is a wireless digital audio interface
format developed by Sony.
It enables highly secure transmission with high sound
quality and low system latency, and supports simultaneous
multi-channel operation.
What is Cross Remote?
Cross Remote is a system that allows transmitters to be
monitored and controlled from a receiver and the Wireless
Studio control software installed on a computer connected
to the receiver.
For example, the settings of a transmitter worn under
clothing can be easily changed over the wireless link.
Preprogrammed wireless channel plans
for simultaneous multi-channel operation
The DWR-R01D has many preprogrammed channel
groups, meaning combination of wireless channels to
permit simultaneous operation of multiple channels
without intermodulation. The DWR-R01D also has
channel plans for multi-channel system using digital
wireless system with analog wireless system, making the
channel setting easier in such cases.
Building up wireless remote control
system according to system scale
Digital wireless transmitters can be remotely controlled
while checking their status on the display of the DWRR01D. You can also use the supplied PC control software
to enable remote control from a PC. According to the scale
and purposes of the system, the following two types of
wireless remote control system can be built up.
ST remote system (stand-alone wireless remote
control system)
The DWR-R01D emits control signal through the whip
antenna attached to the REM ANT connector to control the
transmitters.
NT remote system (network wireless remote
control system)
By adding the optional RMU-01 Remote Control Unit, up
to 82 transmitters can be controlled, enabling the multichannel remote control system operation. Using two or
more RMU-01 units within a system can achieve wider
area coverage.
Operation status monitoring and remote
control of devices via the Wireless Studio
software
The supplied Wireless Studio software allows you to
monitor the status of each receiver, transmitter, and RMU
used for operation, as well as change the settings for each
receiver and transmitter. By saving the setting
configurations as settings files and loading the files, you
can configure groups of settings simultaneously.
Two-channel wireless receiver
With its dual-channel receiver capability, one DWR-R01D
can be used with two transmitters simultaneously. Up to
eight units can be connected to an antenna in cascade, and
up to 16 channels can also be operated without an antenna
divider. Furthermore, if an optional WD-850 UHF
Antenna Divider is used, a system with more than 16
channels can be built.
Auto channel scanning functions
The DWR-R01D comes with two auto channel scanning
functions (active channel scan function and clear channel
scan function) that allow for fast, easy and safe frequency
channel changes.
Various information display and
improvement of operability
The large-scale OLED (Organic Light-Emitting Diode)
display shows various operational information. The large
display, menu buttons, and jog dial enable fast operation.
Furthermore, an ALERT indicator on the front panel lights
Features
9
if trouble occurs during operation, so you can respond
quickly.
Rack mounting
The DWR-R01D can be mounted in an EIA standard 19inch rack (1U size). Solid all-in-one structure is adopted on
the screw brackets and side panels.
Using the CD-ROMs
Supplied CD-ROM “Wireless Studio”
The supplied CD-ROM “Wireless Studio” includes the
following files.
Wireless Studio: Software that allows the status of the
DWR-R01D, RMU-01, and Sony digital wireless
transmitters to be monitored from the PC, in addition to
allowing remote control of settings for the DWR-R01D
and transmitters.
Wireless Studio User’s Guide: This is a PDF file that
describes function and usage of the Wireless Studio. The
file can be viewed on the PC screen.
To use the Wireless Studio, the software must be installed
in the PC.
For details, see “Installing the software” on page 10.
Adobe Reader Version 6.0 or higher must be installed on
your computer in order to read the User’s Guide contained
on the CD-ROM.
For details, see “Using the CD-ROM manual” on
page 11.
Operating conditions of the software
For details on operating conditions of the software, refer to
the Wireless Studio User’s Guide stored on the supplied
CD-ROM “Wireless Studio.”
Installing the software
Notes
• If the older version of Wireless Studio is already
installed in the PC, uninstall it (see page 11).
• Quit all applications before installing the software.
• Be sure to log in as the administrator.
Notes on installation
The installation procedure below describes the operation
on the PC that runs Windows 7. Note that the procedure
may vary according to the operating system.
1
Insert the CD-ROM “Wireless Studio” in your
CD-ROM drive.
10
Using the CD-ROMs
2
Click “Start” and then click “Run”.
3
Click “Browse” and then select the CD-ROM drive.
4
Select “setup.exe” and click “Open”.
This opens the “Welcome to the InstallShield Wizard
for Wireless Studio”.
5
Click “Next”.
A message “Choose an area” appears.
If Wireless Studio is already installed, a message
“Program Already Installed” appears. When this
message appears, select “Repair” to overwrite the
installation, or select “Remove” to first uninstall the
software, and then perform step 4 again.
6
Select your region and click “Next”.
7
Verify and if necessary, change the location where the
software is installed.
To change the location, click “Change...” and change
the location where the software is installed.
8
Click “Next”.
9
Click “Install”.
Installation starts.
When all application files have been copied to the PC,
a message “InstallShield Wizard Completed” appears.
versions) and the frequency lists (English and Japanese
versions) in PDF format.
Using the CD-ROM manual
The manual can be read on a computer with Adobe Reader
installed.
You can download Adobe Reader free from the Adobe
website.
1
Open the index.html file in the CD-ROM.
2
Select and click on the manual that you want to read.
Note
If you have lost or damaged the CD-ROM, you can
purchase a new one from your Sony dealer or Sony service
counter.
Trademarks
• Windows is a registered trademark of Microsoft
Corporation in the United States and/or other countries.
• Adobe and Adobe Reader are trademarks of Adobe
Systems Incorporated in the United States and/or other
countries.
10
Click “Finish”.
To uninstall the software
Note
The uninstallation procedure below describes the
operation on the PC that runs Windows 7. Note that the
procedure may vary according to the operating system.
Click and select “Uninstall a program” or “Programs and
Features” in the Windows Control Panel, then select
“Wireless Studio” from the list, and then delete it.
Opening the installed files
Click “Start” and select “All Programs,” “Sony,” and
“Digital Wireless Microphone System,” and then click one
of the following displayed items.
Wireless Studio: Wireless Studio software
Wireless Studio User’s Guide: User’s Guide in PDF
format
Supplied CD-ROM “Digital Wireless Receiver”
The supplied CD-ROM “Digital Wireless Receiver”
includes the Operating Instructions for the DWR-R01D
(English, French, German, Italian, Spanish, and Japanese
Using the CD-ROMs
11
Parts Identification
Front Panel
1 POWER switch
2 UTILITY button
1 Display (see page 13)
2 Controls (see page 14)
a POWER switch
Turns the receiver on or off.
Set to the \ position to turn the receiver on. Set to the a
position when turning off the main power supply.
3 Monitor indicators
d VOLUME control
5 PHONES terminal
b UTILITY (UTILITY menu) button
Press to display UTILITY menu. This button lights up
brightly during UTILITY menu operation.
c Monitor indicators
One of four indicators lights up corresponding to the
VOLUME control operation.
1/2: Audio from channel 1 is output from the L channel of
the headphones and audio from channel 2 is output from
the R channel.
1: Audio from channel 1 is output from the L and R
channels of the headphones.
2: Audio from channel 2 is output from the L and R
channels of the headphones.
1+2: Audio from channel 1 and 2 are mixed to be output L
and R channels of the headphones.
d VOLUME (monitor channel selection/monitor
volume) control
Press to change the audio output from the headphones.
Rotate to control monitor volume.
e PHONES (headphones) terminal
Connect the headphones here.
12
Parts Identification
1 Display
The contents of the display before the DWR-R01D enters menu operation (top display) are described below. Since the top
display shows information contained in the metadata sent from the transmitter as well as the receiver settings and status,
this can be used for operation monitoring.
The display contents of receiver channel 1 and 2 are the same. The display of receiver channel 1 is used for illustration
purposes.
1 QL meter
2 Receiver channel number
3 Cross Remote condition indication
4 Digital output sync indication
9 Reception channel information
0 RF indicator
qa RF level meters
qs Antenna selection indication
a QL (signal quality level) meter
Indicates the quality of data that is received.
This meter allows you to monitor RF signal deterioration
that may occur when there is signal interference or when
the transmitter is too far from the receiver.
b Receiver channel number
Indicates the receiver channel number.
c Cross Remote condition indication
Indicates the signal transmission condition of the wireless
remote control function (four levels).
: Good transmission
: Somewhat good transmission
: Somewhat poor transmission
: Poor transmission
: Unable to communicate with paired transmitter
Note
When the wireless remote control function (see page 31) is
off, this indication does not appear.
d Digital output sync indication
Indicates sync status of the signal output from the
DIGITAL OUT connectors.
5 Audio level meter
6 AF/PEAK indicator
7 Transmission power indication
8 Battery indication
INT: Output signal is in sync with the internal clock.
EXT: Output signal is in sync with the signal input from
the WORD SYNC IN connector.
e Audio level meter
Indicates the level of audio signal input to the transmitter.
The segments indicating below the reference input level of
the transmitter appear dimly.
When “MIC” is set for the reference input level on the
transmitter: Segments indicating –36 dBFs or below
appear dimly.
When “LINE” is set for the reference input level on the
transmitter: Segments indicating –20 dBFs or below
appear dimly.
f AF/PEAK (audio signal peak) indicator
Lights up green when the audio signal exceeding reference
level is input to the transmitter.
Lights up red when the audio signal exceeding –3 dBFs is
input to the A/D converter on the transmitter.
g Transmission power indication
Indicates the current transmission power setting. This
setting can be changed in the TRANSMITTER menu (see
page 30).
Parts Identification
13
H: transmitting at 50 mW
M: transmitting at 10 mW
L: transmitting at 1 mW
2 Controls
The control areas for channel 1 and channel 2 are identical.
For details on changing the transmitter settings, see
“Changing the Settings on the Transmitter” on page 36.
h Battery indication
Based on metadata from the transmitter, this shows the
transmitter’s battery condition according to eight level
indications.
Replace both batteries when the battery indication starts to
flash.
For details on how to change the batteries on the
transmitter, refer to the Operating Instructions supplied
with the transmitter.
i Reception channel information
Shows the information on receiving signal and the
transmitter name.
First row: Group and channel
Middle row: Frequency of the channel
Last row: Transmitter name and sleep state
j RF (radio reception) indicator
Lights up to indicate the level of the signal input from the
ANTENNA a/b IN connector as follows.
On in orange: 80 dBµ or more
On in green: 25 dBµ to 80 dBµ
On in red: 15 dBµ to 25 dBµ
Off: Less than 15 dBµ
k RF (radio reception) level meters
Indicates the level of the signal input from the ANTENNA
a/b IN connector. The number of segments that light up
depends on the input level.
l Antenna selection indication
Indicates the antenna currently selected by the diversity
function.
1 ALERT indicator
2 Jog dial
3 RECEIVER menu
button
4 RF REMOTE menu
button
5 TRANSMITTER menu button
6 ESC button
a ALERT (alert) indicator
Lights up red when error is detected.
For the specific causes of alerts and remedies, see “When
the Alert Indicator Lights” on page 38.
b Jog dial
Rotate to select an item or a parameter value in the menu.
Press to enter the selected item or parameter value.
c RECEIVER (RECEIVER menu) button
Press to enter the RECEIVER menu. While in the
RECEIVER menu, this button lights up brightly.
d RF REMOTE (RF REMOTE menu) button
Press to enter the RF REMOTE menu. While in the RF
REMOTE menu, this button lights up brightly.
14
e TRANSMITTER (TRANSMITTER menu) button
Press to enter the TRANSMITTER menu. While in the
TRANSMITTER menu, this button lights up brightly.
f ESC (escape) button
Press to go back to the previous menu display.
Parts Identification
Loading...