Sony DVS-7200A Users guide

DIGITAL VIDEO SWITCHER

DVS-7200A

ADVANCED WIPE BOARD

BKDS-7370

FRAME MEMORY EXPANSION BOARD

BKDS-7444

SUPPLEMENT-1

FOR INST ALLA TION MANUAL

Some of the pages in the manual for this model have been revised.
Please update the manual in your possession by adding or replacing
the indicated pages with those supplied as part of this supplement.

Applicable Manual (Manual Code)

1st Edition (3-201-868-01)

Contents

Additional information for the above models.

Section 4 Installation of Options
Section 5 Confirmation in Installation
Section 6 Initial Set-up of System

DVS-7200A (SY) E
3-203-030-01

Printed in Japan

Sony Corporation 1999. 8 08

Broadcasting & Professional Systems Company ©1999

Table of Contents

Manual Structure

Purpose of this manual .............................................................................................. 4

Related manuals......................................................................................................... 4

Contents ..................................................................................................................... 5

1. Installation

1-1. Operating Environment............................................................................... 1-1

1-2. Power Supply .............................................................................................. 1-1

1-2-1. Power Switch for Service (Control panel) .................................1-1

1-2-2. Power Specifications ..................................................................1-1

1-2-3. Power Cord.................................................................................1-1

1-3. Connectors...................................................................................................1-2

1-4. Input and Output Signals of Connectors ..................................................... 1-3

1-4-1. DVS-7200A................................................................................1-3

1-4-2. BKDS-7015................................................................................ 1-6

1-4-3. BKDS-7025/7026.......................................................................1-8

1-5. Examples of System Connection ..............................................................1-11

2. Installation of DVS-7200A

2-1. External Dimensions ................................................................................... 2-1

2-2. Rack Mounting............................................................................................ 2-2

3. Installation of Control Panel

3-1. External Dimensions ................................................................................... 3-1

3-2. Installation Space ........................................................................................3-3

3-3. Installation of MAIN PANEL..................................................................... 3-4

3-4. Installation of DISPLAY PANEL (BKDS-7025/7026)..............................3-5

3-5. Replacement of Key Tops........................................................................... 3-6

DVS-7200AE IM

1

4. Installation of Options

4-1. Installation of Plug-in Boards .....................................................................4-2

4-2. Combination of Optional boards................................................................. 4-4

4-2-1. Function of Optional Boards ......................................................4-4

4-2-2. Relation between Optional Boards and

Rear Panel Connectors ...............................................................4-4

4-3. Installation of Options for DVS-7200A...................................................... 4-6

4-3-1. Removing and Installing of Front Panel ....................................4-6

4-3-2. Inserting/Pulling Out of Plug-in Boards ....................................4-7

4-3-3. Installation of Optional Boards .................................................. 4-9

4-3-4. Installation of BKDS-7690 (Redundant Power Supply Unit).. 4-12
4-3-5. Installation of BKDS-7444

(Frame Memory Expansion Board) ..................................... 4-12-1

4-4. Installation of Options for Control Panel ..................................................4-13

4-4-1. Opening and Closing of Panel..................................................4-13

4-4-2. Turning On/Off the Power Switch ........................................... 4-15

4-4-3. Installation of BKDS-7001 (Control Port Expansion Board) ..4-16
4-4-4. Installation of BKDS-7002 (Source Name Display Unit)

(BKDS-7015) ...........................................................................4-17

4-4-5. Installation of BKDS-7031 Track Ball ....................................4-19

4-4-6. Installation of Option Panels

(BKDS-7030/7031/7033/7340) ................................................4-21

4-4-7. Joining of BKDS-7075 (Control Panel Remote Adaptor) .......4-29

4-4-8. Installation of BKDS-7091 (Redundant Power Supply Unit)

(BKDS-7015) ...........................................................................4-33

4-4-9. Installation of BKDS-7090 (Redundant Power Supply Unit)

(BKDS-7025/7026) .................................................................. 4-34

5. Confirmation in Installation

5-1. Switch Settings on Boards and LEDs Description......................................5-1

5-1-1. DVS-7200A................................................................................5-1

5-1-2. BKDS-7133................................................................................ 5-6

5-1-3. BKDS-7015................................................................................ 5-6

5-1-4. BKDS-7091................................................................................ 5-9

5-1-5. BKDS-7025/7026.....................................................................5-10

5-1-6. BKDS-7090.............................................................................. 5-16

5-2. Adjustment of Secondary Power Supply Voltage.....................................5-17

5-2-1. DVS-7200A..............................................................................5-17

5-2-2. BKDS-7015.............................................................................. 5-19

5-2-3. BKDS-7025/7026.....................................................................5-21

5-3. Adjustment of Operation Power for Fader Lever .....................................5-23

2

DVS-7200AE IM

6. Initial Set-up of System

6-1. Operation and Saving of Set-up Data..........................................................6-1

6-2. Installation of Program (BZS-7040A/7060A) ............................................6-5

6-2-1. Down Load of Program..............................................................6-6

6-2-2. Initializing of Data on RAM ......................................................6-7

6-2-3. Initializing of “Nonvolatile Memory”........................................ 6-8

6-3. Set-up ..........................................................................................................6-9

6-3-1. Confirmation of the Software Version .....................................6-10

6-3-2. Setting of the Signal Format ....................................................6-10

6-3-3. Setting about the System ..........................................................6-11

6-3-4. Saving Set-up Data to Nonvolatile Memory ............................6-12

6-4. Installation of Software for Option Board ................................................6-13

DVS-7200AE IM

3

Purpose of this manual

Related manuals

Manual Structure

This manual is the installation manual of Digital Video Switcher DVS-7200A.
This manual is intended for use by trained system and service engineers, and
describes the information when installing DVS-7200A.

The following manuals are prepared for DVS-7200A.
The part numbers of these manuals as of February, 1999 describe.

..

. User’s Guide (Supplied with BZS-7040A or BZS-7060A)

..

This manual describes the application and operation of DVS-7200A

..

. Operation Manual (Supplied with DVS-7200A)

..

This manual describes the overview, system configuration examples and specifica­tions of options.

..

. Maintenance Manual Part 1 (Supplied with DVS-7200A)

..

This manual describes the information for the periodic maintenance, and the
information for the service with predicated on the replacement of the principal
blocks and mounted circuit boards.
Part number : 3-201-866-01

..

. Maintenance Manual Part 2

..

The following manuals describe the detailed service information. For obtaining,
please contact your local Sony’s sale/service office.

Volume 1 (Block diagrams and Frame wirings)

Part number : 9-967-615-03

Supplement 4 Part number : 9-967-615-84

Volume 2
(Spare parts, Service overview and Replacement of main parts)

Part number : 9-967-616-03

Supplement 5 Part number : 9-967-616-85

Volume 3 (Semiconductor pin assignments)

Part number : 9-967-617-03

Supplement 3 Part number : 9-967-617-83

Volume 4 (Board layouts)

Part number : 9-967-618-03
Supplement 4 Part number : 9-967-618-84

4

DVS-7200AE IM

Section 4

Installation of Options

Optional Equipments for DVS-7200A

Option Function name

BKDS-7103 (DI-36 board) 12Input Serial Digital Board
BKDS-7110 (ADC-21 board) Blank Input Adaptor Board
BKDS-7111 (ADI-3 board) Analog Composite Input Board
BKDS-7113 (DI-34 board) Serial Digital Input Board
BKDS-7133 (ADC-22 and ENC-34 boards) CRK Analog Component Input Board
BKDS-7161 (DA-94 board) Analog Composite Output Board
BKDS-7163 (SD-48 board) Serial Digital Output Board
BKDS-7250 (MIX-35 board) P/P DSK Board
BKDS-7270 (BD-26 board) Key Border Board
BKDS-7271 (BD-35 board) Fine Key/Key Border Board
BKDS-7280 (UP-10 board) ME PVW Board
BKDS-7340 (MIX-35 board) DSK Board/Control Panel Unit
BKDS-7370 (WKG-27 board) Advanced Wipe Board

BKDS-7420 (CC-81 board) Color Correction Board
BKDS-7444 (MY-95 board) Frame Memory Expansion Board
BKDS-7445 (YC-59 board) Frame Memory Adaptor Board
BKDS-7690 (LE-55, RE-109 and RE-110 boards) Redundant Power Supply Unit

BKDS-2031 (CRK-10 board) Chromakey Board
BKDS-2032 (CRK-11 board) Chromakey Upgrade Board
BKDS-2041 (MY-66 board) Frame Memory Board
BKDS-2070 (WKG-12 board) Enhanced Wipe Generator Board
BZS-7040A
BZS-7060A

(*1)

(*2)

Operation Software with Manual (E)
Operation Software with Manual (E)

Optional Equipments for the control panels

Option Function name

BKDS-7001 (IF-523 board) Control Port Expansion Board
BKDS-7002 (LE-147, 148, 180 and DC-92 boards) Source Name Display Unit
BKDS-7030 (KY-328 and LE-144 boards) Key Frame Control Panel Unit
BKDS-7031 (KY-329 board) DME Control Panel Unit
BKDS-7033 (KY-395C board) Memory Recall Control Panel Unit
BKDS-7075 (IF-629 board) Control Panel Remote Adaptor
BKDS-7090 (RE-112 board) Redundant Power Supply Unit
BKDS-7091 (RE-146 board) Redundant Power Supply Unit
BKDS-7340 (KY-393 and LE-142 boards) DSK Board/Control Panel Unit

(*1) : For installation of BZS-7040A, refer to the section 6 and BZS-7040A User’s Guide.
(*2) : For installation of BZS-7060A, refer to the section 6 and BZS-7060A User
(*3) : Those boards can be installed only on the BKDS-7015.

DVS-7200AE IM

’s Guide.

(*3)

(*3)

4-1

4-1. Installation of Plug-in Boards

4-1. Installation of Plug-in Boards

It is possible to be used DVS-7200A for various systems, and its functions can be extended by selecting
the optional boards. Each plug-in board must be installed in the corresponding slot of DVS-7200A.
Confirm that all the boards are in the specified slots by referring to the following table.
For the details of how to install the plug-in board, refer to “4-3-2. Inserting/Pulling Out of Plug-in
Boards”.
The board name are displayed near the eject lever at the left side on the A side of each plug-in board. The
slot numbers that can be installed the board are displayed on the inside of the front panel of DVS-7200A.
Like the standard board, each optional boards should also be installed in the specified slot according to
the slot number display.

Eject lever

Board name

(A side)

1

CPU-2642YC-59



MY-66
CC-81

3 4

ENC-34
ADC-22

5
ENC-34
ADC-22

6
CRK-10
CRK-11

7

MIX-35

BD-26
BD-35

89
CRK-10
CRK-11

MIX-35

BD-26
BD-35

10

11

12

MIX-35

OUT-913OUT-914XPT-1615XPT-1616ADC-21
BD-26
BD-35

DI-36

ADC-21

DI-36

n

(1) Confirm that the connectors on each board are securely connected to the MB-618 board of the main

unit.

(2) If the board is installed in an incorrect slot, a system error occurs. Then the system is not properly

activated.

(3) Be sure to confirm the power supply voltage when an optional board is added or a board is replaced.

(Refer to “5-2. Adjustment of Secondary Power Supply Voltage”.)

17

CPU-264

18

ADC-21

DI-36

4-2

DVS-7200AE IM

Plug-in Boards

Slot No. Option Board Standard Board Function Name

1 CPU-264B board 1 System control board
2 IF-758 board
3 MEM-94 board

1

6 CC-81 board
7 YC-59 board

4 CA-35B board
5 CPU-264 board

2 Interface board
3 Memory board
4 Application board
5 System control board

6 BKDS-7420 : Color correction board
7 BKDS-7445 : Frame memory adaptor board

4-1. Installation of Plug-in Boards

2

3 (Spare)

4 and 5

6, 8 and 10

7, 9 and 11

8 MY-95 board
9 MY-66 board

!/ ENC-34 board
!- ADC-22 board

!= CRK-10 board

![ CRK-11 board

!\ MIX-35 board

(Slot No. 11 only)

!; UP-10 board

!. BD-26 board

(Slot No. 7 and 9)
@/ BD-35 board
(Slot No. 7 and 9)

@- WKG-12 board
or

@= WKG-27 board

!] MIX-35 board

(Slot No. 7 and 9)

!' BD-26 board
(Slot No. 11 only)
!, BD-35 board
(Slot No. 11 only)

8 BKDS-7444 : Frame memory expansion board
9 BKDS-2041 : Frame memory board

!/ BKDS-7133 : Encoder board
!- BKDS-7133 : CRK analog component input board

!= BKDS-2031 : Chromakey board

![ BKDS-2032 : Chromakey upgrade board

!] Video mixer board
!\ BKDS-7250 (for BKDS-7025/7026) or 

BKDS-7340 (for BKDS-7015) : Video mixer board

!; BKDS-7280 : ME PVW board
!' Key border board

!, Fine key/key border board
!. BKDS-7270 : Key border board

@/ BKDS-7271 : Fine key/key border board

@- BKDS-2070 : Enhanced wipe generator board

@= BKDS-7370 : Advanced wipe board

12 and 13

14 and 15

16, 17
and 18

DVS-7200AE IM

@] DA-94 board
@\ SD-48 board

@' DI-36 board

@, ADC-21 board

@. ADI-3 board
#/ DI-34 board

@[ OUT-9 board

@; XPT-16 board

@[ Output processor board
@] BKDS-7161 : Analog composite output board

@\ BKDS-7163 : Serial digital output board

@; Cross point board

@' BKDS-7103 : 12 input serial digital board

@, BKDS-7110 : Blank input adaptor board

@. BKDS-7111 : Analog composite input board
#/ BKDS-7113 : Serial digital input board

4-3

4-2. Combination of Optional boards

4-2. Combination of Optional boards

4-2-1. Function of Optional Boards

1. Input

. The primary inputs, 1 through 12, on the rear panel can be used if installing DI-36 board (BKDS-7103)

into Slot 16. Similarly, inputs 13-24 with DI-36 board installed in Slot 17, and inputs 25-36 with DI-36
board installed in Slot 18.

. The analog composite (NTSC) input can be used if installing ADI-3 board (BKDS-7111) onto ADC-21

board (BKDS-7110).

. The serial digital input can be used if installing DI-34 board (BKDS-7113) onto ADC-21 board

(BKDS-7110).

. The names for the ADI-3 and DI-34 boards printed on the ADC-21 board mean the name of the input

connector for DVS-7200A.

2. Output

. The analog composite output can be used if installing DA-94 board (BKDS-7161) onto the OUT-9

board.

. The serial digital input can be used if installing SD-48 board (BKDS-7163) onto OUT-9 board.
. The names for the DA-94 and SD-48 boards printed on the OUT-9 board mean the name of the output

connector for DVS-7200A.

4-2-2. Relation between Optional Boards and Rear Panel Connectors

Install the applicable optional boards to the specified slots according to the signal to be input and output.
The following table shows the relations between rear panel connectors, signals to be input and output,
boards and slot numbers.

<DVS-7200A Rear Panel>

PRIMARY INPUTS GPI

19

25

31

20

26

32

21

27

33

22

28

34

23

29

35

24

30

36

13

2

8

14

3

9

15

4

10

16

5

11

17

6

12

18

1

7

2

8

3

9

4

10

5

11

6

12

13

AUX BUS

OUTPUTS

1

7

OUTPUTS

OUTPUTS

OUTPUTS

OUTPUTS

CLEAN

OUTPUT

EDIT PVW

OUTPUT

ME-1

ME-2

DSK PGM

PGM

3

4

PVW

OUTPUT

DIRECT

INPUT

1

2



ORK INPUT/

D1 PRIMALY INPUTS

Y/G

B-Y/B

CH 3 CH 1

R-Y/R

SYNC

Y/G

B-Y/B

CH 4 CH 2

R-Y/R

Y/G

B-Y/B

R-Y/R

SYNC

Y/G

B-Y/B

R-Y/R

TERMINAL

REMOTE 4

MATRIX

PANEL 2

/REMOTE 3

SERIAL
TALLY

DME 2

DME 4

EDITOR B

/REMOTE 2

PANEL 1

DME 1

DME 3

EDITOR A

/REMOTE 1

REF

INPUTS

REF

OUTPUT

4-4

SYNC

SYNC

DVS-7200AE IM

4-3. Installation of Options for DVS-7200A

4-3-3. Installation of Optional Boards

There are the three installation types of the optional boards in DVS-7200A excluding BKDS-7444.
<Type 1> The type that the optional board is inserted in the slot.
<Type 2> The type that the optional board is connected onto the connector of the pre-installed board and

is secured by the screws.
<Type 3> The type that the optional board is connected onto the connector of the pre-installed board.
The installation procedures are described below.

<Type 1>

This Type’s Optional Boards

Slot No. Optional board

2 CC-81 board (BKDS-7420)

or

YC-59 board (BKDS-7445)
4, 5 ADC-22 and ENC-34 boards (BKDS-7133)
6, 8 CRK-10 board (BKDS-2031)
11 MIX-35 board (BKDS-7250 when using BKDS-7025/7026)

or

MIX-35 board (BKDS-7340 when using BKDS-7015)
16 to 18 DI-36 board (BKDS-7103)

or

ADC-21 board (BKDS-7110)

(1) Install the optional board. (Refer to “4-3-2. Inserting/Pulling Out of Plug-in Boards”.)

<Type 2>

This Type’s Optional Boards

Slot No. Optional board Pre-installed board

2 MY-66 board (BKDS-2041) CC-81 board (BKDS-7420)

or

YC-59 board (BKDS-7445)
6, 8 CRK-11 board (BKDS-2032) CRK-10 board (BKDS-2031)
7, 9 BD-26 board (BKDS-7270) MIX-35 board

or
BD-35 board (BKDS-7271)

11 BD-26 board (BKDS-7270) MIX-35 board (BKDS-7250 when using BKDS-7025/7026)

or or
BD-35 board (BKDS-7271) MIX-35 board (BKDS-7340 when using BKDS-7015)

DVS-7200AE IM

4-9

4-3. Installation of Options for DVS-7200A

Install the optional board to the pre-installed board or the optional board in the following procedures.

(1) Remove the eleven screws secured to the pre-installed board, shield plate and dummy plate.

PTTWH3 x 6

PTTWH3 x 6

PTTWH3 x 6

Dummy plate

Pre-installed boards

(2) Connect the optional board to the connectors on the pre-installed board.
(3) Secure the optional board and shield plate by ten screws.

Pre-installed board

Shield plate

PTTWH3 x 6

Optinal board

PTTWH3 x 6

PTTWH3 x 6

Shield plate

4-10

DVS-7200AE IM

4-3. Installation of Options for DVS-7200A

<Type 3>

This Type’s Optional Boards

Slot No. Optional board Pre-installed board

7, 9 UP-10 board (BKDS-7280)

WKG-12 board (BKDS-2070)
or
WKG-27 board (BKDS-7370)

11 UP-10 board (BKDS-7280) MIX-35 board (BKDS-7250 when using BKDS-7025/7026)

WKG-12 board (BKDS-2070) MIX-35 board (BKDS-7250 when using BKDS-7025/7026)
or or
WKG-27 board (BKDS-7370) MIX-35 board (BKDS-7340 when using BKDS-7015)

12, 13 DA-94 board (BKDS-7161)

SD-48 board (BKDS-7163)

16 to 18 ADI-3 board (BKDS-7111)

DI-34 board (BKDS-7113)

MIX-35 board

or

MIX-35 board (BKDS-7340 when using BKDS-7015)

OUT-9 board

ADC-21 board (BKDS-7110)

After checking the installation direction of the optional board by its connector number, connect the
optional board to the connectors on the pre-installed board.

n

When installing the optional boards, confirm that the connectors are tightly connected. If the connectors
cannot be completely connected, the optional board may be placed in the other way.

ADI-3 board or DI-34 board

ADC-21 board

Spacers

WKG-27 board

WKG-27 board

MIX-35 boardShield plate Spacer

DA-94 board or SD-48 board

OUT-9 board

WKG-12 board

UP-10 board

MIX-35 board

Removal of WKG-27 board

Pinch the board spacers on the board using a pair of long-nose prier, releasing the lock. Then pull out the
WKG-27 board.

n

A spacer that was attached on the WKG-27 board remains on the MIX-35 board.

DVS-7200AE IM

4-11

4-3. Installation of Options for DVS-7200A

4-3-4. Installation of BKDS-7690 (Redundant Power Supply Unit)

w

To avoid shock hazards, be sure to turn off the breaker at the outside of DVS-7200A or unplug the power
cord when installing BKDS-7690.

Contents

Power unit : 1 pc
Screw (PWH4 x 6) : 4 pcs

(1) Detach the front panel of DVS-7200A. (Refer to “4-3-1. Removing and Installing of Front Panel”.)
(2) Remove the pre-installed blank panel of BKDS-7690 as shown in the following figure.

(Four screws PWH4 x 6)
(3) Properly insert BKDS-7690 to the pre-install position.
(4) Secure BKDS-7690 to DVS-7200A by the four screws (PWH4 x 6) supplied with BKDS-7690.
(5) Turn on the power switch of BKDS-7690.

Blank panel

PWH4 x 6

BKDS-7690

PWH4 x 6

PWH4 x 6

PWH4 x 6

4-12

DVS-7200AE IM

4-3. Installation of Options for DVS-7200A

4-3-5. Installation of BKDS-7444 (Frame Memory Expansion Board)

n

When installing the MY-95 board (BKDS-7444) be sure to turn off the power in order to prevent electric
shock or to protect the board from damaging.

BKDS-7444 configurations

MY-95 board : 1
Harness (MY-95) : 1
Supports : 2
Screws (PWH 3 x 6) : 2

Destination board

MY-66 board (BKDS-2041)

The following procedures explain how to install the BKDS-7444 assuming that the MY-66 board had
already been installed. When installing both BKDS-7444 (MY-95 board) and BKDS-2041 (MY-66
board) at the same time, refer to section “4-3-3. Installation of Optional Boards.”

(1) Remove the two screws they are fixing the MY-66 board (BKDS-2041).
(2) Secure the two supports to the specified positions where the two screws were removed in step (1).
(3) Check the mounting direction of the MY-95 board and connect CN1, CN2, and CN3 on the MY-95

board to the connectors on the MY-66 board.

n

Be sure to check that the three connectors are connected securely.

(4) Fix the MY-95 board to the supports with the supplied two screws (PWH 3 x 6).

Screw (PWH3 x 6)

MY-95 board

Support

Screw (PWH3 x 6)

Screw (PWH3 x 6)

Screw (PWH3 x 6)

Support

CN1

CN2

CN3

CN01

DVS-7200AE IM

CN03

CN02

MY-66 board

4-12-1

4-3. Installation of Options for DVS-7200A

(5) Insert the MY-66 board with the MY-95 board to slot 2. (Refer to section “4-3-2. Installation/

Removal of Plug-in Boards.”)
(6) Remove the CPU-264B board from slot 1. (Refer to section “4-3-2. Installation/Removal of Plug-in

Boards.”)
(7) Connect the supplied harness (MY-95) to CN1 on the CA-35B board of the CPU-264B board.

Harness (MY-95)

CA-35B board

CN1

CPU-264B board

(8) Insert the CPU-264B board to slot 1. (Refer to section “4-3-2. Installation/Removal of Plug-in

Boards.”)
(9) Connect the other end of harness (MY-95) which was connected in step (7) to CN5 on the MY-66

board (slot 2).

CN5

Harness (MY-95)

MY-66 board

4-12-2

DVS-7200AE IM

5-2. Adjustment of Secondary Power Supply Voltage

5-2. Adjustment of Secondary Power Supply Voltage

5-2-1. DVS-7200A

DVS-7200A has the four power sources, +5 V (A), +5 V (B), +3 V, and _5 V. Voltages +5 V (A) and
_5 V can be checked at the test points on the CPU-264 board with digital voltmeter. Voltages +5 V (B)

and +3 V can be checked at the test points on the XPT-16 board with digital voltmeter. After the installa­tion of all plug-in board, be sure to check all voltages in accordance with the following procedures.

n

Confirm that the power unit is properly inserted and secured by the four screws.

When only standard power unit is installed, refer to the following procedures for power
unit A.

This standard power unit is named as power unit A

(Procedures for Power Unit A)

(1) Detach the front panel of DVS-7200A. (Refer to “4-3-1 Removing and Installing of Front Panel”)
(2) Turn on the power switch of the power unit A.
(3) Confirm that all indicators (D15, D16 and D18) on the CPU-264 board light.
(4) Connect the digital voltmeter between test terminals on the CPU-264 and the XPT-16 boards and

confirm that the voltage value of each test connector meet the specification shown in the next page.
If the specification does not meet, adjust the voltage by the adjustment potentiometers of the power
unit A.

n

When connecting the probes of the digital voltmeter between test terminals, take care to avoid
contacting the probes with the GND areas of the shield plates.

When the power unit BKDS-7690 is installed, refer to the following procedures for power
unit B.

The power unit of BKDS-7690 is named as power unit B.

(Procedures for Power Unit B)

(1) Turn off the power switch of the power unit B.
(2) Carry out all steps of “procedures for power unit A”.
(3) Turn off the power switch of the power unit A and turn on the power switch of the power unit B.
(4) Confirm that all indicators (D15, D16 and D18) on the CPU-264 board light.

DVS-7200AE IM

5-17

5-2. Adjustment of Secondary Power Supply Voltage

(5) Connect the digital voltmeter between test terminals on the CPU-264 and the XPT-16 boards and

confirm that the voltage value of each test connector meet the specification shown in the table below.

If the specification does not meet, adjust the voltage by the adjustment potentiometers of the power

unit B.
(6) Turn on the power switches of the power units A and B.
(7) Confirm that the indicators of the power units A and B light. If an indicator of both does not light, re-

carry out from the step (1) of “procedures for power unit B”.

Power supply unit

RE-110 board

+5 V (A)

PWH4 x 8

5V

D15 (B5)

3V

D16 (B5)

_5V

D18 (B5)

5V 3V _5V

GND

CNT3
CNT4

CNT6
CNT7

XPT-16 board

CNT1
CNT2
CNT3

Adjustment driver

CPU-264 board

Power unit Voltage Specifications Test connector Adjustment potentiometer

A +5 V (A) +5.05 ± 0.02 V CPU-264 board RE-110 board

→

CNT3 (+5 V)

→

CNT7 (GND) 1RV201 (Power unit A)

+5 V(B) +5.05 ± 0.02 V XPT-16 board RE-110 board

→

CNT1 (+5 V)

→

CNT3 (GND) 1RV202 (Power unit A)

+3 V +3.35 ± 0.02 V XPT-16 board RE-110 board

→

→

CNT3 (GND) 1RV203 (Power unit A)

→

→

CNT7 (GND) 1RV204 (Power unit A)

_5 V _5.05

+0.00 V (*1)
_0.02 V

CNT2 (+3 V)
CPU-264 board RE-110 board
CNT6 (_5 V)

B +5 V(A) +5.05 ± 0.02 V CPU-264 board RE-110 board

→

CNT3 (+5 V)

→

CNT7 (GND) 1RV201 (Power unit B)

+5 V(B) +5.05 ± 0.02 V XPT-16 board RE-110 board

→

CNT1 (+5 V)

→

CNT3 (GND) 1RV202 (Power unit B)

+3 V +3.35 ± 0.02 V XPT-16 board RE-110 board

→

CNT2 (+3 V)

_5 V _5.03

+0.02 V (*2)
_0.00 V

CPU-264 board RE-110 board
CNT6 (_5 V)

(*1) For the power unit A the center value of the _5 V is _5.05 V.
(*2) For the power unit B the center value of the _5 V is _5.03 V.

→

CNT3 (GND) 1RV203 (Power unit B)

→

→

CNT7 (GND) 1RV204 (Power unit B)

RV201

RV202

+5 V (B)

RV203

+3 V

RV204

_5 V

5-18

DVS-7200AE IM

6-4. Installation of Software for Option Board

6-4. Installation of Software for Option Board

When using BKDS-7370 and BKDS-7444, be sure to install an exclusive software previously in accor­dance with the following procedures. The exclusive software is stored in the supplied floppy disk.

(1) Insert the floppy disk that is supplied with BKDS-7370 or BKDS-7444 in the floppy disk drive.
(2) In the set-up menu screen, press the keys on the display panel in the following sequence.

[SETUP], [1] (SYSTEM), [F10] (INSTALL)
The display for the function keys is changed as follows.

DVS7200
SYSTEM

F1 F2 F3 F4 F5 F6 F7

BKDS-

7370

BKDS-

7444

F8

EXEC

F9 F10

(3) Press [F3] (BKDS-7370) or [F4] (BKDS-7444) key (to display in the reverse), then [F10]

(EXEC) key.
“Do You Want to Load the BKDS-7370 (or BKDS-7444) PROGRAM ?” is indicated on the display,
and the display for the function keys is changed as follows.

NOYES

F9 F10

F1 F2 F3 F4 F5 F6 F7

F8

(4) Press [F9] (YES) key.

The loading of the program starts.

(5) When loading is completed, “Done Load the BKDS-7370 (or BKDS-7444) PROGRAM.” is indicated

on the display, and the display for the function keys is changed as follows.

EXIT

F9 F10

F1 F2 F3 F4 F5 F6 F7

F8

(6) Press [F10] (EXIT) key to reset the control panel.

DVS-7200AE IM

6-13