Sony DSC-T7 User Manual

2-591-809-14 (1)

Prepare the battery pack

Turn the camera on/set the clock

Insert a “Memory Stick Duo”

Digital Still Camera

Read This Firs

Operating Instructions

Before operating the unit, please read this manual and “User’s Guide/Troubleshooting” (separate volume) thoroughly, and retain it for future reference.

DSC-T7

Refer to “User’s Guide/Troubleshooting” (separate volume)

Explains advanced techniques and what to do if you experience trouble with your camera.

Printed on 100% recycled paper using VOC

(Volatile Organic Compound)-free vegetable oil based ink.

1 Insert the battery pack.

Push the back part of the battery pack gently until it clicks into place.

3 To wall outlet

Battery charger

CHARGE lamp

2 Connect the power

Light on: Charging Light off: Completed (Practical charge)

If you continue charging the battery pack for about one more hour (until it is fully charged), the charge will last slightly longer.

• Connect the battery charger to an easily accessible wall outlet (wall socket) close by.

• Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger.

“InfoLITHIUM“ battery pack Full charging time (Practical charging time)

NP-FE1 (supplied) Approx. 170 min. (Approx. 110 min.)

• Time required to charge fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer under certain circumstances or conditions.

(wall socket)

Power cord (mains lead)

cord (mains lead).

4 Insert the charged battery pack.

Battery eject lever

Open the cover.

Insert the battery pack while pressing the battery eject lever with the tip of the battery.

Close the cover.

1 Select . 2 Slide the lens cover or

press

Lighting

(power).

Clock Set

2005

/ :

1 1

Y/M/D M/D/Y D/M/Y

12 00

Cancel

3 Set the clock with the control

button.

1 Select the date display format with v/V, then press

Clock Set

2005

/ :

1 1

2 Select each item with b/B and set the numeric value

v/V, then press z.

with

Clock Set

2005

/ :

1 1

3 Select [OK] with B, then press z.

Clock Set

2005

/ :

1 1

• To cancel, select [Cancel] and press z.

12 00

10 30

Y/M/D M/D/Y D/M/Y

Cancel

Y/M/D M/D/Y D/M/Y

Cancel

Y/M/D M/D/Y D/M/Y

Cancel

Terminal side

Insert the “Memory Stick Duo” all the way in until it clicks.

Select the image size for use

1 Select a mode.

Still image:

Select .

Movie:

Select .

2 Press (Image Size).

3 Select the size with v / V.

3:2

VGA(E-Mail )

Image Size

• The screen above is for still images. For movies, select [640(Fine)] (“Memory Stick PRO Duo” only), [640(Standard)] or [160].

4 Press (Image Size) to

complete the setting.

button

2591809140

Checking the accessories supplied

• Battery charger BC-CS3 (1) • USB cable (1) • Stand (1)

• Power cord (mains lead) (1) • A/V cable (1) • “Memory Stick Duo”

• Rechargeable battery pack NP-FE1 (1)

• Battery case (1) • Interface Adaptor (1) • CD-ROM (Cyber-shot

• Neck strap (1) • Memory Stick Duo Adaptor

(32 MB) (1)

(1)

application software) (1)

• Operating instructions for digital still camera “Read This First” (this manual) (1)

• Operating instructions “User’s Guide/ Troubleshooting” (1)

Notes before use

• Charge the supplied NP-FE1 battery pack before using the camera for the first time.

• The camera is a precision instrument. Be careful not to bump the lens or the LCD screen, and not to apply force to it. Attach the strap to prevent the camera from damage by being dropped, etc.

Hook

Using the AC Adaptor

You can connect the camera using the AC-LS5/AC-LS5K AC Adaptor (not supplied). t “User’s Guide/Troubleshooting” (page 15). Refer to the operating instructions supplied with the AC Adaptor.

To check the remaining battery time

Press (power) to turn on and check the time on the LCD screen.

Remaining indicator

60min

Remaining time

• It takes about one minute until the correct battery remaining time appears.

• The displayed time remaining may not be correct under certain circumstances.

To remove the battery pack

Open the battery cover and slide the battery eject lever in the direction of the arrow. Place your finger on the flange and push the battery pack out. To avoid dropping the battery pack, do not hold the camera with the battery slot facing down when the battery eject lever is out.

Battery eject lever

To use your camera abroad — Power sources

You can use your camera, the supplied battery charger, and the AC-LS5/AC-LS5K AC Adaptor (not supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/ 60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].

• Do not use an electronic transformer (travel converter), as

BC-CS3

this may cause a malfunction.

To change the date and time

Select [Clock Set] in the (Setup) screen and perform the procedure in step 3 above.

t “User’s Guide/Troubleshooting” (page 53)

On the clock display

• If you selected [D/M/Y] in step 3-1, set the time on a 24-hour cycle.

• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.

When turning on the power

• Unless you set the clock, the Clock Set screen appears each time the camera is turned on.

• The following screen appears when the camera is turned on for the second time or afterwards.

60min

When opening the lens cover

• If you open the lens cover too quickly, the camera might not turn on. If this happens, close the cover and then open it again more slowly.

• When opening the lens cover, be careful not to touch the lens.

To turn off the power

Slide the lens cover or press again.

• If the camera is running on battery power and you do not operate the camera for a period of time, the camera turns off automatically to prevent wearing down the battery (Auto power-off function).

Changing the language setting

You can change the screen display to show messages in a specified language. To change the language setting, press MENU to display the menu screen. Select (Setup) with the control button, then, select [ Language] in (Setup1), and select the desired language. t “User’s

Guide/Troubleshooting” (page 51)

On still image sizes

For details on the image size t “User’s Guide/Troubleshooting” (page 13)

Image size Guidelines No. of images Printing

5M (2592×1944) (Default setting)

3:2* (2592×1728)

3M (2048×1536)

1M (1280×960) For printing in postcard size

VGA(E-Mail) (640×480)

*Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards etc.

For printing high density images in A4 or A5 size

For recording a larger number of images For attaching images to e-mail or creating home pages

Less

Fine

Rough

On recordable number of still images and recordable time of movies

Recordable number of still images and recordable time of movies vary depending on the image size selected.

For details on recordable number or time t “User’s Guide/Troubleshooting” (page 22)

Still images Movies

Maximum recordable image Maximum recordable time

• Number of recordable images and time can differ according to shooting conditions.

To remove a “Memory Stick Duo”

Open the cover, then push the “Memory Stick Duo” in once.

• If the access lamp is lit, never remove the “Memory Stick Duo” or turn off the power. The data may be corrupted.

Access lamp

Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website.

http://www.sony.net/

continued on the reverse

Shoot images easily (Auto adjustment mode)

Shoot still images (Scene Selection)

View/delete images

Holding the camera

Hold the camera with your thumb on the strap hook

Position the subject in the center of the focus frame.

Control button

1 Select a mode.

Still image (auto adjustment mode):

Select .

Movie:

Select .

Zoom lever

2 Shoot with the shutter button.

Still image:

Press and hold halfway down to focus

Movie:

Press fully down

To stop recording, press the shutter button fully down again.

AE/AF lock indicator Flashing t lit/beeps

60min

AF range finder frame

60min

REC

Press fully down

The shutter sounds.

1 Select . 2 Press MENU.

3 Select (Camera) with b,

then select a mode with

• For details on modes, see below.

• The setting is maintained even when the power is

MENU button

Control button

turned off.

4 Press MENU to turn off the

menu.

5 Shoot with the shutter

button.

Program Auto

Camera

Mode

Program Auto

Camera

1 Select . 2 Select an image with b/B.

60min

VGA

3/9

BACK/NEXT

Still image: the image size is displayed

Movie: is displayed

v/V.

Movie:

Zoom lever

ISO

button

Control button

To play back a movie, press z.

60min

0010

STOP REV/CUE VOLUME

Rewind/Fast forward: (Return to normal playback: Volume:

v/V

Stop playback:

• Movies with the image size [160] are displayed a size smaller.

0003

10:30

2005 1 1101

VOLUME

STD

64 0

10/10

2005 1 1101

00:00:03

10:30

Playback bar

b/B

Using the control button

60min

VGA

Using the flash for

VGA

still images

60min

VGA

Shooting close-up (Macro)

SAF

v on the control button, then press z.

SAF

60min

VGA

Checking the last

Review

8/8

image you shot (Quick Review)

0029

10:30PM2005 1 1101

RETURN

60min

Using the self-timer

SAF

Checking the last still image you shot (Quick Review)

Press b ( ) on the control button.

To cancel, press

• The image may appear rough right after playback starts.

• To delete the image, press (Delete) and select [Delete] with

b again.

Selecting a flash mode for still images

Before step 2, press v ( ) on the control button repeatedly until the desired mode is selected.

No indicator Strobes if it is dark (default setting)

Forced flash

Slow synchro (Forced flash)

The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light.

No flash

• Shooting distance (when [ISO] is set to [Auto])

W side: Approx. 0.1 to 2.6 m (3 15/16 to 8 feet 6 3/8 inches)

T side: Approx. 0.5 to 2.1 m (1 feet 7 11/16 to 6 feet 10 11/16 inches)

• The flash strobes twice. The first time is to adjust the light quantity.

Shooting close-up (Macro)

Before step 2, press B ( ) on the control button.

To cancel, press

• Setting the zoom all the way to the W side is recommended.

• The in-focus range becomes narrow, and the complete subject may not entirely be in focus.

• The AF speed drops.

• To shoot at even closer distances than close-ups (Macro) recording, use (Magnifying glass mode) in the Scene mode.

B again.

Shortest shooting distance from the lens surface

Setting all the way to the W side: Approx. 8 cm (3 1/4 inches) Setting all the way to the T side: Approx. 25 cm (9 7/8 inches)

Using the zoom

Zoom lever

• You cannot change the zoom scale while shooting a movie.

• When the zoom scale exceeds 3×, the camera uses [Digital Zoom].

For details on the [Digital Zoom] settings and the image quality t “User’s Guide/Troubleshooting”

(page 45)

Using the self-timer

Before step 2, press V ( ) on the control button.

Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter operates (approximately 10 seconds later).

Self-timer lamp

• Using a tripod is recommended.

If you shoot a still image of a subject that is difficult to focus on

• If the subject is closer than approx. 50 cm (19 3/4 inches), use the Macro mode (left column).

• When the camera cannot focus on the subject automatically, the AE/AF lock indicator changes to flashing slowly and the beep does not sound. Recompose the shot and focus again.

Subjects difficult to focus on are:

–Distant from the camera and dark

–The contrast between the subject and its

background is poor.

–Seen through glass

–Moving fast

To identify items on the screen

t “User’s Guide/Troubleshooting” (page 17)

60min60min

–Reflect light or have a lustrous finish

–Flashing

–Against light

To cancel the Scene Selection

Select [Auto] or [Program] with v/V.

Scene Selection modes

The following modes are predetermined to match the scene conditions.

Magnifying glass

The subject appears on the LCD screen magnified by up to 3.5×.

Distance to the subject Magnification scale

1 cm (13/32 inch) 3.5×

2 cm (13/16 inch) 2.2×

5 cm (2 inches) 1.1×

10 cm (4 inches) 0.5×

20 cm (7 7/8 inches) 0.3×

• The focal distance to a subject is approx. 1 cm to 20 cm (13/32 inch to 7 7/8 inches).

• The optical zoom is locked to the W side and cannot be used.

• When you slide the zoom lever, the image is enlarged using the digital zoom.

1.1

Twilight*

Shoots night scenes at a distance without losing the dark atmosphere of the surroundings.

Twilight portrait*

Shoots portraits in dark places.

Candle*

Shoot candlelit scenes, without spoiling the atmosphere.

*The shutter speed becomes slower, so using a tripod is recommended.

To use the functions set by the control button with Scene Selection

Before shooting in step 5, select the settings with the control button. Some functions are not available, depending on the Scene Selection mode. When you press the button to select functions that cannot be combined with Scene Selection, a beep sounds. t “User’s Guide/

Troubleshooting” (page 25)

Soft snap

Shoots portraits of people, flowers, etc., with a gentle atmosphere.

Landscape

Shoots landscapes, etc., by focusing on a distant subject.

High-speed shutter

Shoots moving subjects outdoors or in other bright places.

Beach

Shoots seasides or lakesides, the blue of the water clearly recorded.

Snow

Shoots whitish scenes brightly.

Fireworks*

Fireworks are recorded in all their splendor.

To delete images

1 Display the image you want to delete and press (delete). 2 Select [Delete] with v, then press z.

60min

To cancel the deletion

Delete

Exit

BACK/NEXT

To view an enlarged image (playback zoom)

Slide the zoom lever toward while displaying a still image.

To undo the zoom, slide the zoom lever toward .

Adjust the portion:

v/V/b/B

Cancel playback zoom: z

To store enlarged images: [Trimming] t “User’s Guide/Troubleshooting” (page 43)

Viewing an index screen

Slide the zoom lever toward (index) and select an image with v/V/b/B. To return to the single-image screen, press z. To display the next (previous) index screen, press

b/B.

SINGLE DISPLAY

•

If you slide again, the sixteen-image index screen appears.

To delete images in index mode

1 While an index screen is displayed, press (Delete) and select [Select] with v/V on the

control button, then press z.

2 Select the image you want to delete with v/V/b/B, then press z to display the (Delete)

indicator on the selected image.

To cancel a selection

Select an image you have previously selected for deletion, then press

TO NEXTSELECT

3 Press (Delete). 4 Select [OK] with B, then press z.

• To delete all the images in the folder, select [All In This Folder] with v/V in step 1 instead of [Select], then z.

press

Select [Exit], then press z.

60min

2005 1 1101

0003

2005 1 1101

SINGLE DISPLAY

•

0003

BACK/NEXT

z to delete the indicator from the image.

VGA

VOLUME

3/9

10:30