Sony DSCT20B, DSCT20P, DSCT20W User Manual

Digital Still Camera/Cámara fotografía digital
Instruction Manual Manual de instrucciones
DSC-T20/T25
For details on the advanced operations, please access
“Cyber-shot Handbook” and “Cyber-shot Step­up Guide”
computer.
Para obtener más información sobre las opciones avanzadas, consulte la
shot”
ROM suministrado mediante un ordenador.
Operating Instructions
Before operating the unit, please read this manual thoroughly, and retain it for future reference.
Manual de instrucciones
© 2007 Sony Corporation 3-100-787-63(1)
contained on the supplied CD-ROM via a
“Guía práctica de Cyber-
y la “Guía avanzada de Cyber-shot” del CD-
GB
ES

English

Owner’s Record
The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DSC-T20/DSC-T25 Serial No. ______________________
WARNING
To reduce fire or shock hazard, do not expose the unit to rain or moisture.
For Customers in the U.S.A.
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFEGUARDS

For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them.
Use
[ Power Sources
This set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those sets designed to operate from battery power, or other sources, refer to the operating instructions.
[ Polarization
This set may be equipped with a polarized ac power cord plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in.
[ Overloading
Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.
[ Object and Liquid Entry
Never push objects of any kind into the set through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set.
[ Attachments
Do not use attachments not recommended by the manufacturer, as they may cause hazards.
2
[ Cleaning
Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set.
Installation
[ Water and Moisture
Do not use power-line operated sets near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
[ Power-Cord Protection
Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance.
[ Accessories
Do not place the set on an unstable cart, stand, tripod, bracket, or table. The set may fall, causing serious injury to a child or an adult, and serious damage to the set. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer.
[ Ventilation
The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered.
–Never cover the slots and openings with a cloth
or other materials.
–Never block the slots and openings by placing
the set on a bed, sofa, rug, or other similar surface.
– Never place the set in a confined space, such as a
bookcase, or built-in cabinet, unless proper ventilation is provided.
–Do not place the set near or over a radiator or
heat register, or where it is exposed to direct sunlight.
[ Lightning
For added protection for this set during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power-line surges.
Service
[ Damage Requiring Service
Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions:
–When the power cord or plug is damaged or
frayed.
–If liquid has been spilled or objects have fallen
into the set. –If the set has been exposed to rain or water. –If the set has been subject to excessive shock by
being dropped, or the cabinet has been damaged. –If the set does not operate normally when
following the operating instructions . Adjust only
those controls that are specified in the operating
instructions. Improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the set to normal operation. –When the set exhibits a distinct change in
performance – this indicates a need for service.
[ Servicing
Do not attempt to service the set yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
[ Replacement parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
[ Safety Check
Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition.
3

Read this first

CAUTION
Replace the battery with the specified type only. Otherwise, fire or injury may result.
For Customers in the U.S.A. and Canada
[ RECYCLING LITHIUM-ION
BATTERIES
Lithium-Ion batteries are recyclable.
You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.
For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking Lithium-Ion batteries.
[ HD Output Adaptor Cable
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Battery charger
This power unit is intended to be correctly orientated in a vertical or floor mount position.
For Customers in the U.S.A.
If you have any questions about this product, you may call:
Sony Customer Information Center 1-800-222-SONY (7669)
The number below is for the FCC related matters only.
[ Regulatory Information
Declaration of Conformity
Trade Name: SONY Model No.: DSC-T20/DSC-T25 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
[ CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
[ Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
4
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
For the State of California, USA only
Perchlorate Material - special handling may apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material : Lithium battery contains perchlorate.
For Customers in Europe
This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).
[ Attention
The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.
[ Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.
[ Disposal of Old Electrical &
Electronic Equipment (Applicable
in the European Union and other
European countries with separate
collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Notice for customers in the
United Kingdom
A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
GB
5

Notes on using your camera

[ Internal memory and “Memory
Stick Duo” back up
Do not turn off the camera or remove the battery pack or “Memory Stick Duo” while the access lamp is lighted, as the internal memory data or “Memory Stick Duo” data may be destroyed. Always protect your data by making a back up copy.
[ Notes on recording/playback
• Before you record, make a trial recording to make sure that the camera is working correctly.
• This camera is neither dust-proof, nor splash­proof, nor water-proof. Read “Precautions” (page 30) before operating the camera.
• Be careful not to get the camera wet. Water entering the inside of the camera may cause malfunctions which in some cases may not be repairable.
• Do not aim the camera at the sun or other bright light. It may cause the malfunction of your camera.
• Do not use the camera near a location that generates strong radio waves or emits radiation. The camera may not be able to record or play back properly.
• Using the camera in sandy or dusty locations may cause malfunctions.
• If moisture condensation occurs, remove it before using the camera (page 30).
• Do not shake or strike the camera. In addition to malfunctions and an inability to record images, this may render the recording medium unusable, or cause image data breakdown, damage or loss.
• Clean the flash surface before use. The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission.
[ Notes on the LCD screen
• The LCD screen is manufactured using extremely high-precision technology so over
99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen. These points are normal in the manufacturing process and do not affect the recording in any way.
[ On image data compatibility
• This camera conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and Information Technology Industries Association).
• Playback of images recorded with your camera on other equipment and playback of images recorded or edited with other equipment on your camera are not guaranteed.
[ Warning on copyright
Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.
[ No compensation for contents of
the recording
The contents of the recording cannot be compensated for if recording or playback is not possible due to a malfunction of your camera or recording media, etc.
6

Table of contents

IMPORTANT SAFEGUARDS ..................................................................... 2
Read this first ............................................................................................ 4
Notes on using your camera .................................................................... 6
Getting started ................................................................................. 8
Checking the accessories supplied ......................................................... 8
1 Preparing the battery pack .................................................................... 9
2 Inserting the battery pack/a “Memory Stick Duo” (not supplied) ........ 10
3 Turning the camera on/setting the clock ............................................. 12
Shooting images easily (Auto adjustment mode) ...................... 13
Zoom/Flash/Macro/Self-timer/Display .................................................... 14
Viewing/deleting images ............................................................... 15
Learning the various functions – HOME/Menu ........................... 18
Using the HOME screen ......................................................................... 18
HOME screen items ............................................................................... 19
Using menu items ................................................................................... 20
Menu items ............................................................................................. 21
Enjoying your computer ............................................................... 22
Supported Operating Systems for USB connection and application
software (supplied) ................................................................................. 22
Viewing “Cyber-shot Handbook” or “Cyber-shot Step-up Guide” .......... 23
Indicators on the screen ............................................................... 24
Battery life and memory capacity ................................................26
Battery life and number of images that can be recorded/viewed .......... 26
Number of still images and recording time of movies ............................ 27
Troubleshooting ............................................................................. 28
Battery pack and power ......................................................................... 28
Shooting still images/movies .................................................................. 29
Viewing images ...................................................................................... 29
Precautions .................................................................................... 30
Specifications ................................................................................31
GB
7

Getting started

Checking the accessories supplied

• Battery charger BC-CSG/BC-CSGB/ BC-CSGC (1)
• Power cord (mains lead) (1) (not supplied in the USA and Canada)
• Rechargeable battery pack NP-BG1 (1)/ Battery case (1)
Attach the strap and pass your hand through it, to prevent the camera from damage by being dropped, etc.
• USB, A/V cable for multi-use terminal (1)
• HD Output Adaptor Cable (1) (DSC-T25 only)
• Wrist strap (1)
• CD-ROM (Cyber-shot application software/ “Cyber-shot Handbook”/“Cyber-shot Step-up Guide”) (1)
• Instruction Manual (this manual) (1)
Hook
8

1 Preparing the battery pack

For customers in the USA and Canada
Plug
ɟ
CHARGE lamp
For customers other than those in the USA and Canada
ɟ
CHARGE lamp
Power cord (mains lead)
1Insert the battery pack into the battery charger.
2Connect the battery charger to the wall outlet (wall socket).
The CHARGE lamp lights on, and charging starts. When the CHARGE lamp turns off, charging is finished (Practical charge). If you continue charging the battery pack for about one more hour (until it is fully charged), the charge
will last slightly longer.
[ Charging time
Full charge time Practical charge time
Approx. 330 min. Approx. 270 min.
• Time required to charge a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer under certain circumstances or conditions.
• See page 26 for the number of images that can be recorded.
• Connect the battery charger to an easily accessible wall outlet (wall socket) close by.
• Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger.
• Designed for use with compatible Sony batteries.
GB
9
2 Inserting the battery pack/a “Memory Stick Duo” (not
supplied)
ɟ ɠ
Insert the “Memory Stick Duo” with the front side
Battery/“Memory Stick Duo” cover
facing the LCD screen.
1Open the battery/“Memory Stick Duo” cover.
2Insert the “Memory Stick Duo” (not supplied) all the way in until it clicks.
3Insert the battery pack.
4Close the battery/“Memory Stick Duo” cover.
[ When there is no “Memory Stick Duo” inserted
The camera records/plays back images using the internal memory (approx. 31 MB).
Insert the battery pack while pressing the batter y eject lever with the tip of the battery pack.
10
[ To check the remaining battery time
Press POWER button to turn on and check the remaining battery on the LCD screen.
Battery remaining indicator
Battery remaining guidelines
• It takes about one minute until the correct battery remaining indicator appears.
• The displayed battery remaining indicator may not be correct under certain circumstances.
• The Clock Set screen appears when the camera is turned on for the first time (page 12).
Sufficient power remaining
Battery almost fully charged
Battery half full
Battery low, recording/ playback will stop soon.
Change the battery with fully charged one, or charge the battery. (The warning indicator flashes.)
[ To remove the battery pack/“Memory Stick Duo”
Open the battery/“Memory Stick Duo” cover.
Battery pack“Memory Stick Duo”
Make sure that the access lamp is not lit, then push the “Memory Stick Duo” in once.
Slide the battery eject lever. Be sure not to drop the battery pack.
GB
• Never remove the battery pack/“Memory Stick Duo” when the access lamp is lit. This may cause damage to data in the “Memory Stick Duo”.
11

3 Turning the camera on/setting the clock

POWER button
Lens cover
ɟ
Control button
HOME button
z button
1Press the POWER button or slide the lens cover downward.
2Set the clock with the control button.
1 Select the date display format with v/V, then press z. 2 Select each item with b/B and set the numeric value with v/V, then press z. 3 Select [OK], then press z.
1
2
3
[ To change the date and time
Press the HOME button, and select [ Clock Settings] in (Settings) (page 18).
[ When you turn on the power
After installing the battery pack into the camera, it may take a little while to get the camera
powered.
If the camera is running on battery power and you do not operate the camera for about three
minutes, the camera turns off automatically to prevent wearing down the battery pack (Auto power-off function).
12

Shooting images easily (Auto adjustment mode)

The following procedure is for shooting a still image.
ɠ
Shutter
butto n
Zoom button
MENU button
Control button
Microphone
Flash
Self-timer lamp
Tripod receptacle (bottom)
HOME button
Macro button
Lens cover
DISP button
Flash button Self-timer button
1Slide the lens cover downward.
2Hold the camera steady, keeping your arm at your side.
Position the subject in the center of the focus frame.
3Shoot with the shutter button.
Still image:
1 Press and hold the shutter button
halfway down to focus.
The z (AE/AF lock) indicator (green) flashes, a beep sounds, the indicator stops flashing and remains lit.
2 Press the shutter button fully down.
The shutter sounds.
Movie:
Press the HOME button, and select [ Movie Mode] in (Shooting) (page 18).
AE/AF lock indicator
Lens
GB
13

Zoom/Flash/Macro/Self-timer/Display

[ Using the zoom
Press to zoom, press to undo zoom.
[ Flash (Selecting a flash mode
for still images)
Press B ( ) on the control button repeatedly until the desired mode is selected.
:
Flash Auto
Strobes when there is insufficient light or backlight (default setting)
: Flash forced on
: Slow synchro (Flash forced on)
The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light.
: Flash forced off
[ Macro/Close Focus (Shooting
close-up)
Press b ( ) on the control button repeatedly until the desired mode is selected.
:
Macro off
: Macro On (W side: Approx. 8 cm or farther
(3 1/4 inches or farther), T side: Approx. 25 cm or farther (9 7/8 inches or farther))
:Close focus enabled (Locked to the W side:
Approx. 1 to 20 cm (13/32 to 7 7/8 inches))
[ Using the self-timer
Press V ( ) on the control button repeatedly until the desired mode is selected.
:
Not using the self-timer
: Setting the 10-second delay self-timer
: Setting the 2-second delay self-timer
Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter operates.
[ DISP Changing the screen
display
Press v (DISP) on the control button. Each time you press v (DISP) button, the display changes as follows.
Brightness of LCD backlight up
r
Histogram on
r
Indicators off
r
Indicators on
14

Viewing/deleting images

(Playback)
butto n
Speaker
Multi connector
(bottom)
1Press (Playback).
If you press when the camera is powered off, the camera is turned on automatically and set to playback mode. To switch to the shooting mode, press again.
2Select an image with b/B on the control button.
Movie:
Press z to play back a movie. (Press z again to stop playback.) Press b/B to rewind/fast forward. (Press z to return to normal playback.) Press V to display the volume control screen, then press b/B to adjust the volume.
[ To delete images
1 Display the image you want to delete, then press MENU. 2 Select (Delete) with v and select [This Image] with b/B, then press z. 3 Select [OK] with v, then press z.
(Index)/ (playback
zoom) button
(playback zoom)
button MENU button
ɟ
Control button
HOME button
GB
[ To view an enlarged image (playback zoom)
Press while displaying a still image. To undo the zoom, press . Adjust the portion: v/V/b/B Cancel playback zoom: z
15
[ Viewing an index screen
Press to display the index screen while a still image is displayed. Then, select an image with v/V/b/B. To return to the single image screen, press z.
• You can also access the index screen by selecting [ Index Display] on the HOME screen.
• Each time you press , the number of pictures on the index screen changes.
[ To delete images in index mode
1 Press MENU while the index screen is displayed. 2 Select [Delete] with v and select [Multiple Images] with b/B, then press z. 3 Select the image you want to delete with v/V/b/B, then press z.
The mark is checked in the checkbox of the image. To cancel a selection, select an image you have selected for deletion, then press z again.
4 Press MENU and select [OK] with v, then press z.
• To delete all the images in a folder, select [All In This Folder], then press z in step 2.
[ To play back a series of images (Slide Show)
Select [ Slide Show] in (View Images) on the HOME screen, and then select [Start] with v, then press z.
[ To view images on TV screen
Connect the camera to the TV with the cable for multi-use terminal (supplied).
16
To the multi connector
Cable for multi-use terminal
To audio/video input jacks
Connect the camera to the HDTV with the HD Output Adaptor Cable (DSC-T25 only).
COMPONENT
VIDEO IN
AUDIO
To the multi connector
Green/Blue/Red
HD Output Adaptor Cable (DSC-T25 only)
• The cable for video jacks (Green/Blue/Red) is the same color as the respective jacks.
White/Red
GB
17
Learning the various functions – HOME/Menu

Using the HOME screen

The HOME screen is the gateway screen for all the functions of your camera. You can select the shooting mode or playback mode, or change the settings from the HOME screen.
z button
Control button
HOME button
1Press HOME to display the HOME screen.
Category
Item
Guide
2 Select a category with b/B.
3 Select an item with v/V, then press z.
[ When you select the (Manage Memory) or (Settings) category
1 Select the desired item with v/V.
• This procedure is needed only when you select (Settings).
2 Move the frame with B and select a setting with v/V, then press z. 3 Select the desired setting with v/V, then press z.
• To switch to the shooting mode, press the shutter button halfway down.
18
Loading...
+ 42 hidden pages