Sony DSC-H3 User Manual

Digital Still Camera/Cámara fotografía digital

Instruction Manual Manual de instrucciones

DSC-H3

For details on advanced operations, please read “Cybershot Handbook” (PDF) and “Cyber-shot Step-up Guide”

on the CD-ROM (supplied) using a computer.

Para obtener más información acerca de las operaciones avanzadas, consulte mediante un ordenador la “Guía

práctica de Cyber-shot” (PDF) y la “Guía avanzada de Cyber-shot” que encontrará en el CD-ROM (suministrado).

Operating Instructions

Before operating the unit, please read this manual thoroughly, and retain it for future reference.

Manual de instrucciones

Antes de utilizar la unidad, lea detenidamente este manual y consérvelo para consultarlo en el futuro.

English

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. DSC-H3

Serial No. ___________________________

WARNING

IMPORTANT SAFEGUARDS

For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them.

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

For Customers in the U.S.A.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Use

[ Power Sources

This set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those sets designed to operate from battery power, or other sources, refer to the operating instructions.

[ Polarization

This set may be equipped with a polarized ac power cord plug (a plug having one blade wider than the other).

This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in.

[ Overloading

Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.

[ Object and Liquid Entry

Never push objects of any kind into the set through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set.

[ Attachments

Do not use attachments not recommended by the manufacturer, as they may cause hazards.

[ Cleaning

Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set.

Installation

[ Water and Moisture

Do not use power-line operated sets near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

[ Power-Cord Protection

Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance.

[ Accessories

Do not place the set on an unstable cart, stand, tripod, bracket, or table. The set may fall, causing serious injury to a child or an adult, and serious damage to the set. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer.

[ Ventilation

The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered.

– Never cover the slots and openings with a cloth

or other materials.

– Never block the slots and openings by placing

the set on a bed, sofa, rug, or other similar surface.

– Never place the set in a confined space, such as

a bookcase, or built-in cabinet, unless proper ventilation is provided.

– Do not place the set near or over a radiator or

heat register, or where it is exposed to direct sunlight.

[ Lightning

For added protection for this set during a lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power-line surges.

Service

[ Damage Requiring Service

Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions:

– When the power cord or plug is damaged or

frayed.

– If liquid has been spilled or objects have fallen

into the set. – If the set has been exposed to rain or water. – If the set has been subject to excessive shock by

being dropped, or the cabinet has been

damaged. – If the set does not operate normally when

following the operating instructions. Adjust

only those controls that are specified in the

operating instructions. Improper adjustment of

other controls may result in damage and will

often require extensive work by a qualified

technician to restore the set to normal operation. – When the set exhibits a distinct change in

performance – this indicates a need for service.

[ Servicing

Do not attempt to service the set yourself as opening or removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

[ Replacement parts

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts.

Unauthorized substitutions may result in fire, electric shock, or other hazards.

[ Safety Check

Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition.

Read this first

CAUTION

Replace the battery with the specified type only. Otherwise, fire or injury may result.

Do not expose the batteries to excessive heat such as sunshine, fire or the like.

For Customers in the U.S.A. and Canada

[ RECYCLING LITHIUM-ION

BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.

For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

Battery charger

This power unit is intended to be correctly orientated in a vertical or floor mount position.

For Customers in the U.S.A.

If you have any questions about this product, you may call:

Sony Customer Information Center 1-800-222-SONY (7669)

The number below is for the FCC related matters only.

[ Regulatory Information

Declaration of Conformity

Trade Name: SONY Model No.: DSC-H3 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo,

San Diego, CA 92127U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna. – Increase the separation between the

equipment and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

The supplied interface cable must be used with t he equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

For Customers in Europe

This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).

[ Attention

The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

[ Disposal of Old Electrical &

Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

For the State of California, USA only

Perchlorate Material - special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Perchlorate Material: Lithium battery contains perchlorate.

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

[ Notice for the customers in the

countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 1080075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

Notice for customers in the United Kingdom

A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience.

Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or mark) must be used.

If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

Table of contents

IMPORTANT SAFEGUARDS .................................................................... 2

Read this first ............................................................................................ 4

Notes on using the camera ...................................................................... 8

Getting started ................................................................................. 9

Checking the accessories supplied ......................................................... 9

1 Preparing the battery pack .................................................................. 10

2 Inserting the battery pack/a “Memory Stick Duo” (not supplied) ........ 11

3 Turning the camera on/setting the clock ............................................. 13

Shooting images easily .................................................................14

Mode dial/Zoom/Flash/Macro/Self-timer/Display/Lens hood ................. 15

Viewing/deleting images ...............................................................17

Learning the various functions – HOME/Menu ........................... 19

Using the HOME screen ......................................................................... 19

HOME items ........................................................................................... 20

Using menu items ................................................................................... 21

Menu items ............................................................................................. 22

Enjoying your computer ............................................................... 23

Supported Operating Systems for USB connection and application

software (supplied) ................................................................................. 23

Viewing “Cyber-shot Handbook” ............................................................ 24

Indicators on the screen ............................................................... 25

Battery life and memory capacity ................................................27

Battery life and number of images you can record/view ........................ 27

Number of still images and recording time of movies ............................ 28

Troubleshooting ............................................................................30

Battery pack and power ......................................................................... 30

Shooting still images/movies .................................................................. 31

Viewing images ...................................................................................... 31

Precautions .................................................................................... 32

Specifications ................................................................................33

Notes on using the camera

[ Internal memory and “Memory

Stick Duo” back up

Do not turn off the camera, remove the battery pack, or remove the “Memory Stick Duo” while the access lamp is lit. Otherwise, the internal memory data or “Memory Stick Duo” may be damaged. Be sure to make a backup copy to protect your data.

[ Notes on recording/playback

• Before you start recording, make a trial recording to make sure that the camera is working correctly.

• The camera is neither dust-proof, nor splashproof, nor water-proof. Read “Precautions” (page 32) before operating the camera.

• Avoid exposing the camera to water. If water enters inside the camera, a malfunction may occur. In some cases, the camera cannot be repaired.

• Do not aim the camera at the sun or other bright light. It may cause the malfunction of the camera.

• Do not use the camera near a location that generates strong radio waves or emits radiation. Otherwise, the camera may not properly record or play back images.

• Using the camera in sandy or dusty locations may cause malfunctions.

• If moisture condensation occurs, remove it before using the camera (page 32).

• Do not shake or strike the camera. It may cause a malfunction and you may not be able to record images. Furthermore, the recording media may become unusable or image data may be damaged.

• Clean the flash surface before use. The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission.

[ Notes on the LCD screen and

lens

• The LCD screen is manufactured using extremely high-precision technology so over

99.99% of the pixels are operational for effective use. However, some tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen. These dots are a normal result of the manufacturing process, and do not affect the recording.

• When the battery level becomes low, the lens might stop moving. Insert a charged battery pack and turn on the camera again.

[ On image data compatibility

• The camera conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and Information Technology Industries Association).

• Sony does not guarantee that the camera will play back images recorded or edited with other equipment, or that other equipment will play back images recorded with the camera.

[ Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.

[ No compensation for damaged

content or recording failure

Sony cannot compensate for failure to record or loss or damage of recorded content due to a malfunction of the camera or recording media, etc.

Getting started

Checking the accessories supplied

• Battery charger BC-CSG/BC-CSGB/ BC-CSGC (1)

• Power cord (mains lead) (1) (not supplied in the USA and Canada)

• Rechargeable battery pack NP-BG1 (1)/ Battery case (1)

• USB, A/V cable for multi-use terminal (1)

• Shoulder strap (1)

• Lens hood (1)/Adaptor ring (1)

• Lens cap (1)/Lens cap strap (1)

•CD-ROM (1) – Cyber-shot application software – “Cyber-shot Handbook” – “Cyber-shot Step-up Guide”

• Instruction Manual (this manual) (1)

Attaching the shoulder strap and the lens cap

Attach the strap to prevent the camera from damage by being dropped.

1 Preparing the battery pack

For customers in the USA and Canada

Plug

CHARGE lamp

For customers in countries/regions other than the USA and Canada

CHARGE lamp

Power cord (mains lead)

1Insert the battery pack into the battery charger.

2Connect the battery charger to the wall outlet (wall socket).

The CHARGE lamp lights up, and charging starts. When the CHARGE lamp turns off, charging is finished (Practical charge). If you continue charging the battery pack for about one more hour (until it is fully charged), the charge

will last slightly longer.

[ Charging time

Full charge time Practical charge time

Approx. 330 min. Approx. 270 min.

• The table above shows the time required to charge a fully depleted battery pack at a temperature of 25 °C (77 °F). Charging may take longer depending on conditions of use and circumstances.

• See page 27 for the number of images that can be recorded.

• Connect the battery charger to the nearest wall outlet (wall socket).

• Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger.

• Designed for use with compatible Sony batteries.

2 Inserting the battery pack/a “Memory Stick Duo” (not

supplied)

Battery/“Memory Stick Duo” cover

With the terminal side facing the LCD screen, insert the “Memory Stick Duo” until it clicks into place.

Insert the battery pack while pressing the battery eject lever with the tip of the battery pack.

1Open the battery/“Memory Stick Duo” cover.

2Insert the “Memory Stick Duo” (not supplied).

3Insert the battery pack.

4Close the battery/“Memory Stick Duo” cover.

[ When there is no “Memory Stick Duo” inserted

The camera records/plays back images using the internal memory (approx. 31 MB).

[ To check the remaining battery charge

Press POWER to turn on and check the remaining battery charge on the LCD screen.

Remaining charge indicator

Status Sufficient

power remaining

• It takes about one minute until the correct remaining charge indicator appears.

• The remaining charge indicator may not be correct depending on conditions of use and circumstances.

• The Clock Set screen appears when you turn on the camera for the first time (page 13).

Battery almost fully charged

Battery half full

Battery low, recording/ playback will stop soon.

Change the battery with fully charged one, or charge the battery. (The warning indicator flashes.)

[ To remove the battery pack/“Memory Stick Duo”

Open the battery/“Memory Stick Duo” cover.

Battery pack“Memory Stick Duo”

Make sure that the access lamp is not lit, then push the

“Memory Stick Duo” in once.

• Never remove the battery pack/“Memory Stick Duo” when the access lamp is lit. This may cause damage to data in the “Memory Stick Duo”/internal memory.

Slide the battery eject lever. Be sure not to drop the battery pack.

3 Turning the camera on/setting the clock

POWER button

HOME button

z button

Control button

Clock Settings

Y/M/D

M/D/Y

D/M/Y

://3010112007

1Press POWER.

2Set the clock with the control button.

1 Select the date display format with v/V, then press z. 2 Select each item with b/B and set the numeric value with v/V, then press z. 3 Select [OK], then press z.

[ To change the date and time

Press HOME, and select [ Clock Settings] in (Settings) (pages 19, 20).

[ Notes on when the power is turned on

• Once the battery is inserted in the camera, it may take time before operation becomes possible.

• If the camera is running on battery power and you do not operate the camera for about three minutes, the camera turns off automatically to prevent wearing down the battery pack (Auto power-off function).

Shooting images easily

Flash

Microphone

Shutter button

Mode dial

W/T (Zoom) button MENU button

Control button

HOME button

Tripod receptacle (bottom)

1Select the desired function from the mode dial.

When shooting still images (Auto Adjustment mode): When shooting movies: Select .

Select .

2Hold the camera, with your elbows pressed against your body to steady it.

Position the subject in the center of the focus frame.

3Shoot with the shutter button.

When shooting still images:

1 Press and hold the shutter button

halfway down to focus.

The z (AE/AF lock) indicator (green) flashes, a beep sounds, the indicator stops flashing and remains lit.

2 Press the shutter button fully down.

AE/AF lock indicator

When shooting movies:

Press the shutter button fully down. To stop recording, press the shutter button fully down again.

Macro button

DISP button

Flash button

Self-timer button

Mode dial/Zoom/Flash/Macro/Self-timer/Display/Lens hood

[ Using the mode dial

Set the mode dial to the desired function.

Auto Adjustment

Allows easy shooting with the settings adjusted automatically.

Program Auto

Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value). You can adjust other settings using the menu.

Manual Exposure shooting

Allows you to shoot after adjusting the exposure manually.

Movie mode

Allows you to record movies with audio.

High Sensitivity

Shoots images without a flash even in low lighting.

Soft Snap

Shoots images with a softer atmosphere for portraits of people, flowers, etc.

Advanced Sports Shooting

Shoots images by predicting the movement of the subject and setting focus.

Twilight Portrait

Shoots sharp images of people in a dark place without losing the nighttime atmosphere.

Landscape

Shoots with the focus on a distant subject.

SCN* Scene Selection

Selects a setting from the Scene Selection menu.

* Scene Selection in SCN mode

Press MENU and select a setting.

Twilight

Shoots night scenes without losing the nighttime atmosphere.

Beach

Shoots seaside or lakeside scenes with the blueness of the water captured more vividly.

Snow

Shoots snow scenes in white more clearly.

Fireworks

Shoots fireworks in all their splendor.

[ W/T Using the zoom

Press T to zoom, press W to undo zoom. Pressing the button slightly zooms slowly and pressing the button fully down zooms fast.

[ Flash (Selecting a flash mode

for still images)

Press B ( ) on the control button repeatedly until the desired mode is selected.

: Flash Auto

Flashes when there is insufficient light or backlight (default setting)

: Flash forced on

: Slow synchro (Flash forced on)

The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light.

: Flash forced off

• The flash automatically pops up and strobes when using the flash. Close the flash by hand after use.

[ Macro (Shooting close-up)

Press b ( ) on the control button repeatedly until the desired mode is selected.

: Macro off

: Macro on (W side: Approx. 2 cm or farther (13/16 inches or farther), T side: Approx. 90 cm or farther (2 feet 11 1/2 inches or farther))

[ Using the self-timer

Press V ( ) on the control button repeatedly until the desired mode is selected.

: Not using the self-timer

: Setting the 10-second delay self-timer

: Setting the 2-second delay self-timer

When you press the shutter button, the selftimer lamp flashes and a beep sounds until the shutter operates.

[ Attaching the lens hood

1 Attach the adaptor ring while the power

is off.

Adaptor ring

2 Position the lens hood as shown below

and turn the lens hood clockwise until it clicks.

Self-timer lamp

[ DISP Changing the screen

display

Press v (DISP) on the control button. Each time you press v (DISP), the display and brightness changes as follows:

Indicators on

Indicators on*

Histogram on*

Indicators off*

* The brightness of the LCD Backlight up.

Lens hood

Storing the lens hood

Position the lens hood as shown below and turn the lens hood clockwise until it clicks.

Viewing/deleting images

(playback zoom)/ (Index) button

(playback zoom)

(Playback)

button

MENU button

HOME button

Speaker (bottom)

1Press (Playback).

If you press when the camera is powered off, the camera is turned on automatically and set to playback mode. To switch to the shooting mode, press again.

2Select an image with b/B on the control button.

Movie:

Press z to play back a movie. (Press z again to stop playback.) Press B to fast forward, b to rewind. (Press z to return to normal playback.) Press V to display the volume control screen, then press b/B to adjust the volume.

[ To delete images

1 Display the image you want to delete, then press MENU. 2 Select [Delete] with v and select [This Image] with b/B, then press z. 3 Select [OK] with v, then press z.

button

Control button

[ To view an enlarged image (playback zoom)

Press while displaying a still image. To undo the zoom, press . Adjust the position with v/V/b/B. To cancel the playback zoom, press z.

[ To view an index screen

Press (Index) to display the index screen while a still image is displayed. Then, select an image with v/V/b/B. To return to the single image screen, press z.

• You can also access the index screen by selecting [ Index Display] in (View Images) on the

HOME screen.

• Each time you press (Index), the number of images on the index screen increases.

[ To delete images in index mode

1 Press MENU while the index screen is displayed. 2 Select [Delete] with v and select [Multiple Images] with b/B, then press z. 3 Select the image you want to delete with v/V/b/B, then press z.

The mark is checked in the checkbox of the image. To cancel a selection, select an image you have selected for deletion, then press z again.

4 Press MENU and select [OK] with v, then press z.

•To delete all the images in a folder, select [All In This Folder], then press z in step 2.

[ To play back a series of images (Slide Show)

1 Select [ Slide Show] in (View Images) on the HOME screen. 2 Select [Start] with v, then press z.

[ To view images on TV

Connect the camera to the TV with the cable for multi-use terminal (supplied).

To the multi connector

To audio/video input jacks

Cable for multi-use terminal (supplied)

To view on HD (High Definition) TV, an HD Output Adaptor Cable (not supplied) is needed.

• If you set the image size to [16:9], you can record images in the size that fills the entire screen of the HD

TV.

• You cannot view movies output in [HD (1080i)] signal format.

Learning the various functions – HOME/Menu

Using the HOME screen

The HOME screen is the gateway screen for all the functions of the camera, and can be called up regardless of the mode setting (shooting/viewing).

HOME button

z button

Control button

1Press HOME to display the HOME screen.

Category Item

Guide

2 Select a category with b/B on the control button.

3 Select an item with v/V, then press z.

[ When you select the (Manage Memory) or (Settings) category

1 Select the desired item with v/V.

• This is functional only when you select (Settings).

2 Press B and select the desired setting with v/V, then press z. 3 Select a setting with v/V, then press z.

• The camera is set to the shooting or viewing mode by pressing HOME again.

For details on the operation 1 page 19

HOME items

Pressing HOME displays the following items. Details on the items are displayed on the screen by the guide.

Categories Items

Shooting View Images

Printing, Other

Manage Memory

Settings

Shooting

Single Image

Index Display

Slide Show

Music Tool

Download Music Format Music

Memory Tool

Memory Stick Tool

Format Create REC. Folder Change REC. Folder Copy

Internal Memory Tool

Format

Main Settings

Main Settings 1

Beep Function Guide Initialize

Main Settings 2

USB Connect COMPONENT Video Out

Shooting Settings

Shooting Settings 1

AF Illuminator Grid Line AF Mode Digital Zoom Conversion Lens

Shooting Settings 2

Auto Review

Clock Settings

Language Setting

Using menu items

MENU button

Control button

z button

Press MENU to display the menu.

Function Guide

• The menu will be displayed only during shooting and playback mode.

• Different items will become visible depending on the selected mode.

2Select a desired menu item with v/V on the control button.

• If the desired item is hidden, keep pressing v/V until the item appears on the screen.

3Select a setting with b/B.

• If the desired item is hidden, keep pressing b/B until the item appears on the screen.

• Select an item in playback mode, and press z.

4Press MENU to turn off the menu.

+ 47 hidden pages