Sony CCD-TRV69E, CCD-TRV55E, CCD-TRV65E, CCD-TRV75, CCD-TRV75PK Service Manual
...
CCD-TRV3E/TRV13E/TRV23E/TRV45E/TRV55E/
TRV65E/TRV69E/TRV75/TRV75PK/TRV715
RMT-708/717
SERVICE MANUAL
Photo : CCD-TRV55E
: RMT-708
B MECHANISM
US Model
Canadian Model
CCD-TRV75/TRV715
E Model
CCD-TRV3E/TRV23E/TR V45E/
TRV55E/TRV75/TRV75PK
AEP Model
CCD-TRV13E/TRV65E/TRV69E
UK Model
East European Model
North European Model
Russian Model
CCD-TRV13E/TRV65E
Hong Kong Model
CCD-TRV3E/TRV23E/TR V45E/TR V55E
Tourist Model
CCD-TRV3E/TRV55E/TRV75
Australian Model
CCD-TRV3E/TRV23E/TR V45E
Chinese Model
CCD-TRV3E/TRV23E/TRV45E/
TRV55E/TRV65E
Video camera recorder
System
Video recording system
CCD-TR V75/TRV75PK/TRV715 : 4
rotary heads (SP/LP independent heads)
CCD-TRV3E/TRV13E/TRV23E/
TRV45E/TRV55E/TRV65E/TRV69E :
2 Rotary heads
Helical scanning FM system
Audio recording system
Rotary heads, FM system
Video signal
CCD-TR V75/TRV75PK/TRV715 :
NTSC color, EIA standards
CCD-TRV3E/TRV13E/TRV23E/
TRV45E/TRV55E/TRV65E/TRV69E :
PAL color CCIR standards
Usable cassette
8mm video format cassette
CCD-TRV3E/TRV13E/TRV23E/
TRV45E/TRV55E : standard 8
CCD-TRV65E/69E/TRV75/TRV75PK/
TRV715 : Hi8 or standard 8
Recording / Playback time
CCD-TR V75/TRV75PK/TRV715 :
(using 120 min. cassette)
SP mode: 2 hours
LP mode: 4 hours
CCD-TRV3E/TRV13E/TRV23E/
TRV45E/TRV55E/TRV65E/TRV69E :
(using 90 min. cassette)
SP mode: 1 hours and 30 minutes
LP mode: 3 hours
MICROFILM
SPECIFICATIONS
Fastforward/rewind time
CCD-TR V75/TRV75PK/TRV715 :
(using 120 min. cassette) Approx. 5 min.
CCD-TRV3E/TRV13E/TRV23E/
TRV45E/TRV55E/TRV65E/TRV69E :
(using 90 min. cassette) Approx. 5 min.
Image device
CCD (Charge Coupled Device)
Viewfinder
Electronic viewfinder
Monochrome
Lens
Combined power zoom lens
Filter diameter 17/16 in. (37 mm)
CCD-TRV13E (AEP,UK) :
16 x (Optical), 32 x (Digital)
CCD-TR V13E (EE,NE,RU) :
16 x (Optical), 160 x (Digital)
CCD-TR V65E (AEP,UK)/TRV75 (US,
CND)/TRV715 :
18 x (Optical), 72 x (Digital)
CCD-TRV23E/TRV45E/TRV55E/
TRV65E (EE,NE,RU,E,AUS,HK,CN)/
TRV75 (E, JE)/TRV75PK :
18 x (Optical), 220 x (Digital)
Focal distance
CCD-TR V3E/13E : 3/16 - 2 5/8 in.
(4.1 - 65.6 mm)
CCD-TRV23E/TRV45E/TRV55E/
TRV65E/TRV69E/TRV75/TRV75PK/
TRV715 : 3/16 - 8 in. (4.1 - 73.8 mm)
When converted to a 35 mm still camera
CCD-TRV3E/TRV13E :
1 9/16 - 24 7/8 in. (39.4 - 630 mm)
CCD-TRV23E :
1 9/16 - 28 in. (39.4 - 709 mm)
CCD-TRV45E/TRV55E/TRV65E/
TRV69E/TRV75/TRV75PK/TRV715 :
1 7/8 - 33 1/2 in. (47.2 - 850 mm)
For MECHANISM ADJUSTMENTS, refer to
the “8mm Video MECHANICAL ADJUSTMENT
MANUAL VII” (9-973-801-11).
Color temperature
Auto
Minimum illumination*
* Minimum illumination expresses the
light level a camcoder requires to
produce a picture.
CCD-TRV23E : 0.4 lux (F 1.4)
CCD-TRV3E/13E : 0.4 lux (F1.4)
(*Visible minimum low light 0.2 lux)
* Visible minimum low light expresses
the light level to produce a visible
signal.
CCD-TRV45E/TRV55E/TRV65E/
TRV69E/TRV75/TRV75PK/TRV715 :
0.7 lux (F 1.4)
CCD-TRV23E/TRV45E/TRV55E/
TRV65E/TRV69E/TRV75/TRV75PK/
TRV715 :
0 lux (in NightShot mode)*
* Object invisible for the dark can be
shot with infrared lighting.
Illumination range
CCD-TR V3E/TRV13E/TRV23E :
0.4 lux to 100,000 lux
CCD-TRV45E/TRV55E/TRV65E/
TRV69E/TRV75/TRV75PK/TRV715 :
0.7 lux to 100,000 lux
Recommended illumination
More than 100 lux
LCD screen
Picture
CCD-TRV3E/TRV13E/TRV23E/
TRV65E/TRV69E :
2.5 inches measured diagonally
2 x 1 1/2 in.(50.3 x 37.4 mm)
CCD-TRV45E/TRV55E :
3.5 inches measured diagonally
2 7/8 x 2 in.(72.4 x 50.4 mm)
— Continued on next page —
hVIDEO CAMERA RECORDER
CCD-TRV3E/TRV13E/TRV23E/TRV45E/TRV55E
HVIDEO CAMERA RECORDER
CCD-TRV65E/TRV69E/TRV75/TRV75PK/TRV715
CCD-TRV75/TRV75PK/TRV715 :
3 inches measured diagonally
2 3/8 x 1 3/4 in.(59.5 x 43.2 mm)
On-screen display
TN LCD/TFT active matrix method
Total dot number
CCD-TRV3E/TRV13E/TRV23E :
61,380 (279 x 220)
CCD-TRV65E/TRV69E :
84.260 (380 x 220)
CCD-TRV45E/TRV55E :
105,380 (479 x 220)
CCD-TRV75/TRV75PK/TRV715 :
89,622 (383 x 234)
Input and output connectors
S video input/output(CCD-TRV65E
(CN)/TRV75/TRV75PK/TRV715 only)
S video output(CCD-TRV65 (AEP,
UK, EE, NE, RU)/TRV69E only)
4-pin mini DIN
Luminance signal :
1 Vp-p, 75 ohms, unbalanced
CCD-TRV75/TRV75PK/TRV715 :
Chrominance signal :
0.286 Vp-p, 75 ohms, unbalanced
CCD-TRV65E (CN) :
Chrominance signal :
0.3 Vp-p, 75 ohms, unbalanced
Video input(CCD-TRV45E/TRV55E/
TRV65E (CN)/TRV75/TRV75PK/
TRV715 only)/output
Phono jack, 1 Vp-p, 75 ohms, unbalanced
Audio input (CCD-TRV45E/TRV55E/
TRV65E (CN)/TRV75/TRV75PK/
TRV715 only)/output
CCD-TRV13E/TRV13E/TRV23E :
Monaural, Phone jack, 327 mV
CCD-TRV45E/TRV55E/TRV69E/
TRV75/TRV75PK/TRV715 : Phono
jacks (2: stereo L and R) 327 mV, (at
output impedance 47 kilohms)
impedance less than 2.2 kilohms
RFU DC OUT
Special minijack, DC 5V
Headphone jack(CCD-TRV45E/
TRV55E/TRV65E/TRV69E/TRV75/
TRV75PK/TR V715 only)
Stereo minijack (ø 3.5 mm)
Earphone jack(CCD-TRV3E/
TRV13E/TR V23E only)
Monaural minijack (ø 3.5 mm)
LANC control jack
Stereo mini-minijack (ø 2.5 mm)
MIC jack
Mini jack, 0.388mV low impedance
with 2.5 to 3.0 V DC, output impedance
6.8 kilohms (ø 3.5 mm)
CCD-TRV3E/TRV13E/TRV23E :
Monaural type
CCD-TRV45E/TRV55E/TRV65E/
TRV69E/TR V75/TRV75PK/TRV715 :
Stereo type
Speaker
Dynamic speaker
Intelligent accessory shoe(CCD-
TRV45E/TRV55E/TRV65E/TRV69E/
TRV75/TRV75PK/TRV715 only)
8-pin connector
General
Power requirements
7.2 V (battery pack)
8.4 V (AC power adaptor)
Averege power
consumption(when using the
battery pack)
During camera recording using
LCD
CCD-TRV3E/TRV13E : 3.1 W
CCD-TRV23E : 3.2 W
CCD-TRV65E/TRV69E : 3.3 W
CCD-TRV45E/TRV55E : 3.5 W
CCD-TRV75/TRV75PK/TRV715 :
3.4 W
Viewfinder
CCD-TRV3E/TRV13E : 2.5 W
CCD-TRV23E/TRV75/TRV75PK/
TRV715 : 2.6 W
CCD-TRV45E/TRV55E/TRV65E/
TRV69E : 2.7 W
Operating temperature
32°F to 104°F(0°C to 40°C)
Storage temperature
-4°F to +140°F(-20°C to +60°C)
Dimentions (Approx.)
CCD-TRV3E/TRV13E/TRV23E/
TRV65E/TRV69E :
4 1/4 x 4 1/4 x 8 1/4 in.
(107 x 107 x 209 mm)(w/h/d)
CCD-TRV45E/TRV55E/TRV75/
TRV75PK/TRV715 :
4 1/2 x 4 3/8 x 8 1/2 in.
(114 x 111 x 214 mm)(w/h/d)
Mass (Approx.)
CCD-TR V3E/TRV13E/TRV23E :
1 lb 15 oz (890 g)
CCD-TRV65E/TRV69E :
1 lb 15 oz (900 g)
CCD-TRV45E/TRV55E :
2 lb 1 oz (950 g)
CCD-TR V75/TRV75PK/TRV715 :
2 lb 1oz (940 g)
excluding the battery pack, lithium
battery, cassette and shoulder strap
2 lb 3 oz (1 kg)
including the battery pack NP-F330,
lithium battery CR2025, cassette and
shoulder strap
Microphone
CCD-TR V3E/TRV13E/TRV23E :
Monaural type
CCD-TRV45E/TRV55E/TRV65E/
TRV69E/TRV75/TRV75PK/TRV715 :
Stereo type
Supplied accessories
See page 4.
AC power adaptor
Power requirements
100 -240 V AC, 50/60 Hz
Power consumption
23 W
Output voltage
DC OUT: 8.4 V, 1.5 A in operating
mode
Operating temperature
32°F to 104°F(0°C to 40°C)
Storage temperature
-4°F to +140°F(-20°C to +60°C)
Dimentions (Approx.)
5 x 1 9/16 x 2 1/2 in. (125 x 39 x 62
mm)(w/h/d) excluding projecting parts
Mass (Approx.)
9.8 oz (280 g) excluding power cord
(Main lead)
Design and specifications are subject to
change without notice.
• Abbreviation
CND : Canadian Model
EE : East European Model
NE : North European Model
RU : Russian Model
CN : Chinese Model
HK : Hong Kong Model
AUS : Australian Model
JE : Tourist Model
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer:
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
2. Check the interboard wiring to ensure that no wires are “pinched”
or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors,
that were installed during a previous repair. P oint them out to
the customer and recommend their replacement.
4. Look for parts which, though functioning, show obvious signs
of deterioration. Point them out to the customer and recommend
their replacement.
SAFETY-RELATED COMPONENT WARNING !!
COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH
MARK ! ON THE SCHEMA TIC DIAGRAMS AND IN THE P ARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit board Repairing
• Keep the temperatur e of the soldering iron around 270°C during
repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!!
LES COMPOSANTS IDENTIFIÉS P AR UNE MARQUE ! SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE P AR DES PIÈCES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
– 2 –
Remark
CCD-
TRV715
CCD-
TRV75/
CCD-
TRV75
CCD-
TRV69E
CCD-
TRV65E
US,CND
TRV75PK
E,JE/E
US,CND
AEP
CN
AEP,UK,EE,
CND : Canadian Model
EE : East European Model
NE : North European Model
RU : Russian Model
HK : Hong Kong Model
AUS : Australian Model
JE : Tourist Model
Note1 : EE,NE,RU model is 160X
Note2 : EE,NE,R U model is 220X
• Abbreviation
16X : LSV601A, 18X : LSV600A
¬ : LSV600A
¬ : with SE-66/67 board SE451,452,IC451
¬ : with VC-195 board IC204
¬ : with FK-8500 block S005,007
¬ : with VC-195 board IC751
¬ : VC-195 board IC204 is CXD3131
¬ : VC-195 board IC204 is CXD3131
2.5 inch : PD-92 board, 3/3.5 inch : PD-93 board
¬ : with VC-195 board X151
¬ : with VC-195 board CN909
¬ : with VC-195 board IC701
¬ : with CF-50/51 board Q003,005
¬ : with MF-8500/MR-8500
NTSC
RMT-708¬G
18X
72X
760H¬¬
5heads
Stereo¬¬¬GG3 inch¬¬GG¬¬
NTSC
RMT-708¬G
18X
220X
760H¬¬
5heads
Stereo¬¬¬GG3 inch¬¬GG¬¬
NTSC
RMT-708¬G
18X
72X
760H¬¬
5heads
Stereo¬¬¬GG3 inch¬¬GG¬¬
PAL
RMT-717¬G
18X
72X
760H¬¬
3heads
Stereo¬GGGG2.5 inch¬¬G¬¬¬
PAL
RMT-708¬G
18X
220X
760H¬¬
3heads
Stereo¬¬GGG2.5 inch¬¬GG¬¬
NE,RU
PAL
RMT-708¬G
18X
72X(Note 2)
760H¬¬
3heads
Stereo¬GGGG2.5 inch¬¬GG¬¬
CN : Chinese Model
CCD-
TRV55E
E,HK,CN,JEPAL
CCD-
TRV45E
E,HK,AUS,
CCD-
TRV23E
E,HK,AUS,
CCD-
TRV13E
AEP,UK,EE
CCD-
TRV3E
E,AUS,HK,
Model
Table for difference of function
Destination
CN
PAL
CN
PAL
TYPE A TYPE B TYPE C TYPE D TYPE E TYPE F
NE,RU
PALGG¬16X
CN,JE
PALGG¬16X
Classification
Color System
RMT-708G¬
18X
220X
760H¬¬
RMT-708G¬
18X
220X
760H¬¬
RMT-708G¬
18X
220X
510H¬G
32X (Note 1)
510HGG
100X
510HGG
Digital
Remote commander
Hi8
Standard 8
Lens Optical
CCD
3heads
3heads
3heads
3heads
3heads
Night shot
Steady shot
5heads/3heads
Stereo¬¬G¬¬3.5 inch¬¬GG¬¬
StereoG¬GGG3.5 inch¬¬GG¬¬
MonoGGGG¬2.5 inchGG¬GG¬
MonoGGGGG2.5 inchGGGGGG
MonoGGGGG2.5 inchGGGGGG
Audio System
TBC&DNR
VTR REC
Laser Link
Photo mode
Digital effect
LCD
Monitor IN
Intelligent Accessory Shoe
Normal Accessory Shoe
Time code
Display window indicator backlight
Manual Focus
– 3 –
Supplied accessories
1
3
7
!¡
4
8
!™
2
56
90
1 Wireless Remote Commander (1)
RMT-717 : CCD-TRV69E
RMT-708 : Except CCD-TRV69E
2 AC-L10A/L10B/L10C AC power adaptor
3 NP-F330 Battery pack (1)
4 CR2025 Lithium Battery (1)
The lithium battery is already installed in your camcorder.
5 Size AA (R6) battery for Remote Commander
(2)
6 A / V connecting cable (1)
Stereo : Except CCD-TRV3E/TRV13E/TRV23E
Monaural : CCD-TRV3E/TRV13E/TRV23E
7 Shoulder strap (1)
8 Battery case (1)
CCD-TRV75 : US, CND
9 21 pin adaptor (1)
VMC-91 : CCD-TRV65E : AEP, EE, NE, RU, UK/TRV69E
VMC-89 : CCD-TRV13E
!º 8mm tape
CCD-TRV75 : US/TRV715 : US
!¡ 2 pin conversion adaptor (1)
CCD-TRV3E : E, HK/TRV23E : E, HK/TRV45E : E, HK/
TRV55E : E, HK/TRV75 : E/TRV75PK
!™ 2 pin conversion adaptor (1)
CCD-TRV3E : JE/TRV55E : JE/TRV75 : JE
• Abbreviation
CND : Canadian Model
EE : East European Model
NE : North European Model
RU : Russian Model
HK : Hong Kong Model
AUS : Australian Model
JE : Tourist Model
CN : Chinese Model
– 4 –
SERVICE NOTE
1. POWER SUPPL Y DURING REPAIRS
In this unit, about 10 seconds after power is supplied (8.4V) to the
battery terminal using the service power cord (J-6082-223-A), the
power is shut off so that the unit cannot operate.
This following three methods are available to prevent this. Take
note of which to use during repairs.
Method 1.
Connect the servicing remote commander RM-95 (J-6082-053-B)
to the LANC jack, and set the remote commander switch to the
“ADJ” side.
Method 2.
Press the battery switch of the battery terminal using adhesive tape,
etc.
Method 3.
Use the DC IN terminal. (Use the AC power adaptor.)
Battery terminal
Battery switch
‘
DC IN terminal
2. TO T AKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)
1 Refer to 2-1-1. to remove the front panel assembly.
2 Refer to 2-1-2. to remove the cabinet (R) assembly.
3 Refer to 2-1-11. to remove the battery panel assembly.
4 Refer to 2-1-13. to remove the cabinet (L) assembly.
5 Add +5V from the DC POWER SUPPLY and unload with a
pressing the cassette lid.
6
Pull the timing belt in the direction of arrow A
with a pinsette while pressing the cassette lid
(take care not to damage) to adjust the
bending of a tape.
A
Pinsette
Timing belt
Battery SIG terminal
Press the cassette lid not to rise the
cassette compartment
[DC power supply]
Battery terminal
(+5V)
’
7
Let go your hold the cassette
lid and rise the cassette
compartment to take out a cassette.
Timing belt
– 5 –
+
Loading motor
Adjust the bending of a tape
–
SELF-DIAGNOSIS FUNCTION
1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or Display
window what to do. This function consists of two display; selfdiagnosis display and service mode display.
Details of the self-diagnosis functions are provided in the Instruction
manual.
Viewfinder
C : 3 1 : 1 1
Blinks at 3.2 Hz
C
Repairede by :
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service engineer
3 1 1 1
Block
Indicates the appropriate step to be taken
E. g.
31 ... Reload the tape.
32 ... Turn on power again.
Display window
C : 3 1 : 1 1
Detailed Code
2. Self-diagnosis display
When problems occur while the unit is operating, the counter of the
viewfinder or Display window shows a 4-dig it display consisting
of an alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
Refer to page7
Self-diagnosis Code table
3. Service Mode Display
The service mode display shows up to six self-diagnosis codes shown in the past.
Display window
3-1. Display Method
While pressing the “STOP” key, set the switch from OFF to “VTR or PLAYER”, and continue pressing the “STOP” key for 5 seconds
continuously. The service mode will be displayed, and the counter will show the backup No. and the 5-character self-diagnosis codes.
Viewfinder
[3] C : 3 1 : 1 1
Lights up
[3]
Backup No.
Order of previous errors
3-2. Switching of Backup No.
By rotating the control dial, past self-diagnosis codes will be shown in order. The backup No. in the [] indicates the order in which the
problem occurred. (If the number of problems which occurred is less than 6, only the number of problems which occurred will be shown.)
[1] : Occurred first time [4] : Occurred fourth time
[2] : Occurred second time [5] : Occurred fifth time
[3] : Occurred third time [6] : Occurred the last time
C : 3 1 : 1 1
Self-diagnosis codes
Display window
3 C : 3 1 : 1 1
Control dial
3-3. End of Display
Turning OFF the power supply will end the service mode display.
Note: The self-diagnosis display data will be backed up by the coin-type lithium battery. When this coin-type lithium battery is
disconnected, the self-diagnosis data will be lost by initialization.
– 6 –
4. Self-diagnosis Code T able
Self-diagnosis Code
Block
Function
Repaired by:
C
21
C
22
C
23
C
31
C
31
C
31
C
31
C
31
C
31
C
31
C
31
C
31
C
31
C
31
C
31
C
31
C
32
C
32
C
32
C
32
C
32
C
32
C
32
C
32
C
32
C
32
C
32
C
32
C
32
E
61
E
61
E
62
E
62
Detailed
Code
00
00
00
10
11
20
21
22
23
30
31
40
41
42
43
44
10
11
20
21
22
23
30
31
40
41
42
43
44
00
10
00
01
Condensation.
Video head is dirty .
Non-standard battery is used.
LO AD direction. Loading does not
complete within specified time
UNLOAD direction. Loading does not
complete within specified time
T reel side tape slacking when unloading.
S reel side tape slacking when unloading.
T reel fault
S reel fault
FG fault when starting capstan
FG fault during normal capstan operations
FG fault when starting drum
PG fault when starting drum
FG fault during normal drum operations
PG fault during normal drum operations
Phase fault during normal drum operations
LO AD direction loading motor time-out
UNLOAD direction loading motor time-
out
T reel side tape slacking when unloading.
S reel side tape slacking when unloading.
T reel fault
S reel fault
FG fault when starting capstan
FG fault during normal capstan operations
FG fault when starting drum
PG fault when starting drum
FG fault during normal drum operations
PG fault during normal drum operations
Phase fault during normal drum operations
Difficult to adjust f ocus
(Cannot initialize focus.)
Zoom operations fault
(Cannot initialize zoom lens.)
Handshake correction function does not
work well.(With pitch angular velocity
sensor output stopped)
Handshake correction function does not
work well.(With y aw angular v elocity
sensor output stopped)
Symptom/State Correction
Remove the cassette, and insert it again after one hour.
Clean with the optional cleaning cassette.
Use the InfoLITHIUM battery.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Inspect the lens block focus reset sensor (Pin !ª of CN551 of VC-195
board) when focusing is performed when the focus dial is rotated in the
focus manual mode and the focus motor drive circuit (IC552 of VC-195
board) when the focusing is not performed.
Note : Use the remote commander RM-95 only for the model without
the focus dial.
Inspect the lens block zoom reset sensor (Pin @¡ of CN551 of VC-195
board) when zooming is performed when the zoom lens is operated and
the zoom motor drive circuit (IC552 of VC195 boar d) when zooming is
not performed.
Inspect pitch angular velocity sensor (SE451 of SE-66/67 board)
peripheral circuits.
Inspect yaw angular velocity sensor (SE452 of SE-66/67 board)
peripheral circuits.
– 7 –
TABLE OF CONTENTS
SERVICE NOTE
1. Power Supply During Repairs ......................................... 5
2. To Take out a Cassette when not Eject (Force Eject)....... 5
Self-Diagnosis Function
1. Self-diagnosis function ....................................................6
2. Self-diagnosis Display ..................................................... 6
3. Service Mode Display......................................................6
3-1. Display Method................................................................ 6
3-2. Switching of Backup No..................................................6
3-3. End of Display ................................................................. 6
4. Self-diagnosis Code Table ...............................................7
1. GENERAL
Using this manual ......................................................................1-1
Checking supplied accessories ..................................................1-1
Installing and Charging the battery pack ...................................1-1
Inserting a cassette.....................................................................1-2
Camera recording ......................................................................1-2
Hints for better Shooting ...........................................................1-4
Checking the recorded picture ...................................................1-5
Playing back a tape ....................................................................1-5
Searching for the end of the picture ..........................................1-6
Using alternative power sources ................................................1-6
Changing the mode settings ......................................................1-7
Shooting with backlighting .......................................................1-8
Using the FADER function .......................................................1-8
Shooting in the dark (NightShot) ..............................................1-9
Using the wide mode function...................................................1-9
Using the PROGRAM AE function...........................................1-9
Focusing manually...................................................................1-10
Enjoying picture effect ............................................................1-10
Adjusting the exposure ............................................................1-11
Superimposing a title ...............................................................1-11
Making your own titles............................................................1-12
Recording with the date/time...................................................1-12
Optimizing the recording condition.........................................1-12
Releasing the STEADY SHOT function .................................1-13
Watching on a TV screen.........................................................1-13
Editing onto another tape.........................................................1-13
Recording from a VCR or TV .................................................1-14
Changing the lithium battery in the camcoder ........................1-14
Resetting the date and time......................................................1-14
Simple setting of clock by time difference..............................1-15
Usable cassettes and playback modes .....................................1-15
Tips for using the battery pack ................................................1-15
Maintenance information and precautions ..............................1-16
Using your camcorder abroad .................................................1-17
Self-diagnosis display..............................................................1-17
Identifying the parts.................................................................1-18
Warning Indicators ..................................................................1-20
2. DISASSEMBLY
2-1. Removal of Front Panel Block .........................................2-1
2-2. Removal of Cabinet (R) Block .........................................2-2
2-3. Removal of EVF Block-1.................................................2-2
2-4. Removal of LCD Block (3/3.5 inch) ................................2-2
2-5. Removal of LCD Block (2.5 inch) ...................................2-2
2-6. Remo val of CF-51 (CF-50) Board and Control Switch Bloc k
(MR-8500)/(MF-8500) .................................................... 2-3
2-7. Removal of EVF Block-2.................................................2-3
2-8. Removal of Cabinet (L) Block and
Battery Panel Block .........................................................2-4
2-9. Removal of Cassette Lid Assembly .................................2-4
2-10. Removal of Control Switch Block (FK-8500) .................2-4
2-11. Removal of Zoom Lens Block .........................................2-5
2-12. Removal of DD-105 Board and PJ-84 (PJ-83) Board......2-5
2-13. Removal of VC-195 and SE-67 (SE-66) Board ............... 2-5
2-14. Service Position ............................................................... 2-6
2-15. Circuit Board Location..................................................... 2-7
3. BLOCK DIAGRAMS
3-1. Overall Block Diagram ....................................................3-1
3-2. Camera/Video 1 Block Diagram ......................................3-5
3-3. VTR/Camera Control Block Diagram .............................3-9
3-4. Servo Block Diagram .....................................................3-12
3-5. Mode Control Block Diagram........................................3-15
3-6. Audio Block Diagram ....................................................3-19
3-7. LCD (CCD-TR V23E/TRV45E/TR V55E/TR V65E/TRV69E/
TR V75/TR V75PK/TRV715) Block Diagram ......................3-23
3-8. LCD (CCD-TR V3E/TRV13E) Block Diagram ...................3-26
3-9. B/W EVF Block Diagram ..............................................3-29
3-10. Power Block Diagram ....................................................3-33
– 8 –
4. PRINTED WIRING BOARDS AND SCHEMATIC
DIAGRAMS
4-1. Frame Schematic Diagram (1) ...........................................4-1
• Frame Schematic Diagram (2) ........................................4-4
4-2. Printed Wiring Boards and Schematic Diagrams...............4-7
• CD-197/198 (CCD Imager)
(2.5 Inch LCD, 3 Inch/3.5 Inch LCD Model) Board.......4-8
• VC-195 (Camera, Y/C Processor, IN/OUT,
REC/PB Head Amp, Servo/System Control, Servo,
Audio, IR Transmiter, Mode Control) Board ................4-10
• VC-195 (Camera 1) Board ............................................4-17
• VC-195 (Camera 2) Board ............................................4-19
• VC-195 (Y/C Process) Board........................................4-23
• VC-195 (IN/OUT) Board ..............................................4-27
• VC-195 (REC/PB Head Amp) Board............................4-31
• VC-195 (Servo/System Control) Board ........................4-35
• VC-195 (Servo) Board ..................................................4-38
• VC-195 (Audio) Board..................................................4-41
• VC-195 (IR Transmiter) Board .....................................4-46
• VC-195 (Mode Control) Board .....................................4-49
• SE-67/66 (Steady Shot)
(2.5 Inch, 3 Inch/3.5 Inch LCD Model) Board..............4-52
• PJ-83/84 (AV IN/OUT)
(2.5 Inch, 3 Inch/3.5 Inch LCD Model) Board..............4-55
• MA-331 (Stereo Mic, Laser Link)
(2.5 Inch LCD Model) Board ........................................4-58
• MA-312 (Stereo Mic, Laser Link)
(3 Inch/3.5 Inch LCD Model) Board.............................4-59
• CF-50 (Control (2.5 Inch LCD Model)) Board .............4-64
• CF-51 (Control (3 Inch/3.5 Inch LCD Model)) Board..4-73
• Control Switch Block (FK-8500/SS-8500) ...................4-77
• PD-92 (RGB Decorder, LCD Drive, Back Light LCD
(2.5 Inch LCD Model)) Board.......................................4-78
• PD-92 (RGB Decorder) Board ......................................4-81
• PD-92 (LCD Drive) Board ............................................4-84
• PD-92 (Back Light) Board ............................................4-87
• PD-92 (LCD) Board ......................................................4-88
• PD-93 (RGB Decorder, LCD Drive, Back Light LCD
(3 Inch/3.5 Inch LCD Model)) Board ...........................4-90
• PD-93 (RGB Decorder) Board ......................................4-93
• PD-93 (LCD Drive) Board ............................................4-96
• PD-93 (Back Light) Board ............................................4-99
• PD-93 (LCD) Board ....................................................4-100
• VF-99 (B/W EVF (B/W EVF Model)) Board.............4-103
• DD-105 (Power) Board ...............................................4-108
5. ADJUSTMENTS
5-1. CAMERA SECTION ADJUSTMENTS ..........................5-1
1-1. Preparations before Adjustment (Camera Section) ..........5-1
1-1-1. List of Service Tools ................................................. 5-1
1-1-2. Preparations ...............................................................5-2
1-1-3. Precautions ................................................................5-5
1. Setting the Switch .....................................................5-5
2. Adjusting Procedure ..................................................5-5
3. Subject .......................................................................5-5
1-1-4. Adjusting Remote Commander .................................5-6
1. Using the adjusting remote commander ....................5-6
2. Precautions upon using the adjusting
remote commander ....................................................5-6
1-1-5. Data Processing .........................................................5-7
1-2. Initialization of D, E, F Page Data....................................5-8
1. Initialization of D, E, F Page Data ............................5-8
2. Modification of D, E, F Page Data...........................5-8
3. D Page Table .............................................................5-9
4. F Page Table ............................................................5-10
5. E Page Table ............................................................5-12
1-3. Camera System Adjustments ..........................................5-14
1. G-CAM flip Adjustment .........................................5-14
2. Hall Adjustment ......................................................5-15
3. Flange Back Adjustment .........................................5-16
3-1. Flange Back Adjustment (1) ................................... 5-16
3-2. Flange Back Adjustment (2) ................................... 5-16
4. Flange Back Check .................................................5-17
5. Picture Frame Setting ..............................................5-17
6. Color Reproduction Adjustment .............................5-18
7. IRIS IN/OUT Adjustment .......................................5-19
8. MAX GAIN Adjustment .........................................5-19
9. Auto White Balance Standard Data Input ...............5-20
10. Auto White Balance Adjustment.............................5-20
11. White Balance Check ..............................................5-21
12. Angular Velocity Sensor Sensitivity Adjustment ....5-22
(CCD-TRV45E/TRV55E/TRV65E/TRV69E/TRV75/
TRV75PK/TRV715)
1-4. Monochrome Electronic Viewfinder
System Adjustments .......................................................5-23
1-4-1. Horizontal Slant Check ...........................................5-23
1-4-2. Centering Adjustment ............................................. 5-23
1-4-3. Focus Adjustment ....................................................5-23
1-4-4. Aberration Adjustment ............................................5-24
1-4-5. Horizontal Amplitude Adjustment (VF-99 board) ..5-24
1-4-6. Vertical Amplitude Adjustment (VF-99 board) .......5-25
1-4-7. Brightness Adjustments (VF-99 board) ..................5-25
1-4-8. Horizontal Amplitude, Vertical Amplitude,
Focus Check ............................................................5-25
1-5. LCD System Adjustment ................................................5-26
1. LCD initial data input ............................................. 5-26
2. VCO adjustment (PD-92/93 board) ........................ 5-27
3. D range adjustment (PD-92/93 board) ....................5-27
4. Bright adjustment (PD-92/93 board).......................5-28
5. Contrast adjustment (PD-92/93 board) ...................5-28
6. V-COM level adjustment (PD-92/93 board) ........... 5-29
7. Color adjustment (PD-92/93 board) ........................5-29
8. V-COM adjustment (PD-92/93 board)....................5-30
9. White balance adjustment (PD-92/93 board) ..........5-30
5-2. MECHANICAL SECTION ADJUSTMENT.................5-31
2-1. Operating without a Cassette ..........................................5-31
2-2. Tape path Adjustment .....................................................5-31
1. Preparations for adjustments ...................................5-31
– 9 –
5-3. VIDEO SECTION ADJUSTMENTS.............................5-32
3-1. Preparations before Adjustment..............................5-32
3-1-1. Equipments to be Used ...........................................5-32
3-1-2. Precautions on Adjusting ........................................5-33
3-1-3. Adjusting Connectors..............................................5-33
3-1-4. Connecting the Equipments ....................................5-34
3-1-5. Alignment T ape .......................................................5-34
3-1-6. Input/Output Level and Impedance.........................5-36
3-1-7. Recording Mode (Standard 8/Hi8) switching
(Hi8 model) .............................................................5-36
3-1-8. Service Mode ..........................................................5-36
1. Test mode setting.....................................................5-36
2. Emergency memory address ...................................5-37
2-1. EMG CODE (Emergency Code) .............................5-37
2-2. MSW Codes ............................................................5-38
3. Bit value discrimination ..........................................5-39
4. Switch check (1)......................................................5-39
5. Switch check (2)......................................................5-40
6. Headphone jack check ............................................5-40
7. Input/output selection check ...................................5-40
8. LED, LCD (display window) check........................5-41
9. Record of use check ................................................5-41
3-2. System Control System Adjustment .......................5-42
1. Initialization of D, E, F Page Data ..........................5-42
2. Battery End Adjustment (VC-195 board) ...............5-42
3-3. Servo System Adjustments ......................................5-43
1. CAP FG Offset Adjustment (VC-195 board)..........5-43
2. Switching Position Adjustment (VC-195 board) ....5-43
3. NTSC LP Mode Switching Position Adjustment
(VC-195 board) (CCD-TR V75/TR V75PK/TRV715)....5-44
3-4. Video System Adjustments .....................................5-44
1. 28 MHz Origin Oscillation Adjustment
(VC-195 board) .......................................................5-44
2. AFC f0 Adjustment (VC-195 board) ......................5-45
3. Filter f0 Adjustment (VC-195 board)......................5-45
4. Y OUT Level Adjustment (VC-195 board) .............5-46
5. C OUT Level Adjustment (VC-195 board) .............5-46
6. RP Filter f0 Adjustment (VC-195 board)................5-47
7. Hi8 REC Y Current Adjustment
(VC-195 board) (CCD-TRV65E/TRV69E/TRV75/
TRV75PK/TRV715)................................................5-48
8. Standerd8 REC Y Current Adjustment
(VC-195 board) (CCD-TRV3E/TRV13E/TRV23E/
TRV45E/TRV55E) ..................................................5-49
9. Hi8 REC L Level Adjustment
(VC-195 board) (CCD-TRV65E/TRV69E/TRV75/
TRV75PK/TRV715)................................................5-50
10. Standerd8 REC L Level Adjustment
(VC-195 board) (CCD-TRV3E/TRV13E/TRV23E/
TRV45E/TRV55E) ..................................................5-51
11. REC C Current Adjustment (VC-195 board) ..........5-52
3-5. IR Transmitter Adjustments
(CCD-TRV75/TRV75PK/TRV715) ........................5-53
1. IR Video Carrier Frequency Adjustment
(VC-195 board) .......................................................5-53
2. IR Video Deviation Adjustment (VC-195 board)....5-53
3. IR Audio Deviation Adjustment (VC-195 board) ...5-54
3-6. Stereo Audio System Adjustment
(CCD-TR V45E/TR V55E/TR V65E/TR V69E/TRV75/
TR V75PK/TR V715)................................................5-55
1. 1.5 MHz Deviation Adjustment (VC-195 board)....5-57
2. 1.7 MHz Deviation Adjustment (VC-195 board)....5-57
3. BPF f0 Adjustment (VC-195 board) .......................5-58
3-7. Monaural Audio System Adjustment
(CCD-TR V3E/TR V13E/TR V23E) ..........................5-58
1. 1.5 MHz Deviation Adjustment (VC-195 board)....5-59
2. BPF Adjustment (VC-195 board) ...........................5-59
3-8. Arrangement Diagram for Adjustment Parts...........5-60
6. REPAIR P ARTS LIST
6-1. Exploded Vie ws ....................................................... 6-1
6-1-1. Cabinet (L) Block Assembly....................................6-1
6-1-2. Front Panel Block Assembly....................................6-2
6-1-3. Cabinet (R) Block Assembly
(TRV45E/TRV55E/TRV75/TRV75PK/TRV715)....6-3
6-1-4. Cabinet (R) Block Assembly
(TRV3E/TRV13E/TRV23E/TRV65E/TRV69E)......6-4
6-1-5. LCD Block Assembly (3/3.5 Inch)
(TRV45E/TRV55E/TRV75/TRV75PK/TRV715)....6-5
6-1-6. LCD Block Assembly (2.5 Inch)
(TRV3E/TRV13E/TRV23E/TRV65E/TRV69E)......6-6
6-1-7. EVF Block Assembly (B/W EVF) ...........................6-7
6-1-8. Main Boards Assembly ............................................6-8
6-1-9. Battery Panel and CCD Block Assembly ................6-9
6-1-10. Device Lens (LSV -600A/LSV-601A) ....................6-10
6-1-11. Cassette Compartment Assembly ..........................6-11
6-1-12. LS Chassis Assembly............................................. 6-12
6-1-13. Mechanism Chassis Assembly............................... 6-13
6-2. Electrical Parts List ................................................6-14
– 10 –
Loading...