To reduce the risk of fire or electric
shock, do not expose this apparatus
to rain or moisture.
To avoid electrical shock, do not
open the cabinet. Refer serv icing to
qualified personnel only.
Batteries or batteries installed
apparatus shall not be exposed to
excessive heat such as sunshine,
fire or the like.
CAUTION
The use of optical instruments with
this product will increase eye
hazard. As the laser beam used in
this Blu-ray Disc/DVD player is
harmful to eyes, do not attempt to
disassemble the cabinet.
Refer servicing to qualified
personnel only.
This label is located on the laser
protective housing inside the
enclosure.
This appliance is classified as a
CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT
MARKING is located on the laser
protective housing inside the
enclosure.
Notice for customers in the
United Kingdom and
Republic of Ireland
A molded plug complying with
BS1363 is fitted to this equipment
for your safety and convenience.
Should the fuse in the plug
supplied need to be replaced, a fuse
of the same rating as the supplied
one and approved by ASTA or BSI
to BS1362, (i.e., marked with
or mark) must be used.
If the plug supplied with this
equipment has a detachable fuse
cover, be sure to attach the fuse
cover after you change the fuse.
Never use the plug without the fuse
cover. If you should lose the fuse
cover, please contact your nearest
Sony service station.
Disposal of Old Electrical
& Electronic Equipment
(Applicable in the
European Union and
other European countries
with separate collection
systems)
This symbol on the product or on
its packaging indicates that this
product shall not be treated as
household waste. Instead it shall be
handed over to the applicable
collection point for the recycling of
electrical and electronic
equipment. By ensuring this
product is disposed of correctly,
you will help prevent potential
negative consequences for the
environment and human health,
which could otherwise be caused
by inappropriate waste handling of
this product. The recycling of
materials will help to conserve
natural resources. For more
detailed information about
recycling of this product, please
contact your local Civic Office,
your household waste disposal
service or the shop where you
purchased the product.
Disposal of waste
batteries (applicable in
the European Union and
other European countries
with separate collection
systems)
This symbol on the battery or on
the packaging indicates that the
battery provided with this product
shall not be treated as household
waste.
On certain batteries this symbol
might be used in combination with
a chemical symbol. The chemical
symbols for mercury (Hg) or lead
(Pb) are added if the battery
contains more than 0.0005%
mercury or 0.004% lead.
By ensuring these batteries are
disposed of correctly, you will help
prevent potentially negative
consequences for the environment
and human health which could
otherwise be caused by
inappropriate waste handling of the
battery. The recycling of the
materials will help to conserve
natural resources.
In case of products that for safety,
performance or data integrity
reasons require a permanent
connection with an incorporated
battery, this battery should be
replaced by qualified service staff
only.
To ensure that the battery will be
treated properly, hand over the
product at end-of-life to the
applicable collection point for the
recycling of electrical and
electronic equipment.
For all other batteries, please view
the section on how to remove the
battery from the product safely.
Hand the battery over to the
applicable collection point for the
recycling of waste batteries.
For more detailed information
about recycling of this product or
battery, please contact your local
Civic Office, your household
waste disposal service or the shop
where you purchased the product.
2
The manufacturer of this product is
Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075
Japan. The Authorized
Representative for EMC and
product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61,
70327 Stuttgart, Germany. For any
service or guarantee matters please
refer to the addresses given in
separate service or guarantee
documents.
Precautions
• This unit operates on 220 V –
240 V AC, 50 Hz/60 Hz. Check
that the unit’s operating voltage
is identical with your local power
supply.
• To prevent fire or shock hazard,
do not place objects filled with
liquids, such as vases, on the
apparatus.
• Install this unit so that the mains
lead can be unplugged from the
wall socket immediately in the
event of trouble.
Notes About the Discs
• To keep the disc clean, handle
the disc by its edge. Do not
touch the surface.
Dust, fingerprints, or scratches
on the disc may cause it to
malfunction.
• Do not expose the disc to
direct sunlight or heat sources
such as hot air ducts, or leave it
in a car parked in direct
sunlight as the temperature
may rise considerably inside
the car.
• After playing, store the disc in
its case.
• Clean the disc with a cleaning
cloth. Wipe the disc from the
centre out.
• Do not use solvents such as
benzine, thinner,
commercially available disc/
lens cleaners, or anti-static
spray intended for vinyl LPs.
• If you have printed the disc’s
label, dry the label before
playing.
• Do not use the following discs.
– A lens cleaning disc.
– A disc that has a non-
standard shape (e.g., card,
heart).
– A disc with a label or sticker
on it.
– A disc that has cellophane
tape or sticker adhesive on it.
• Do not resurface the playing
side of a disc to remove
surface scratches.
Precautions
On safety
• To prevent fire or shock
hazard, do not place objects
filled with liquids, such as
vases, on the player, or place
the player near water, such as
near a bathtub or shower ro om.
Should any solid object or
liquid fall into the cabinet,
unplug the player and have it
checked by qualified
personnel before operating it
any further.
• Do not touch the AC power
cord (mains lead) with wet
hands. Doing so may cause an
electric shock.
On placement
• Place the player in a location
with adequate ventilation to
prevent heat build-up in the
player.
• Do not place the player on a
soft surface such as a rug that
might block the ventilation
holes.
• Do not install this player in a
confined space, such as a
bookshelf or similar unit.
• Do not place the player in a
location near heat sources, or
in a place subject to direct
sunlight, excessive dust, or
mechanical shock.
• Do not place the player
outdoors, in vehicles, on ship s,
or on other vessels.
• If the player is brought directly
from a cold to a warm location,
or is placed in a very damp
room, moisture may condense
on the lenses inside the player.
Should this occur, the player
may not operate properly. In
this case, remove the disc and
leave the player turned on for
about half an hour until the
moisture evaporates.
• Do not install the player in an
inclined position. It is
designed to be operated in a
horizontal position only.
,continued
3
• Keep the player and the discs
away from equipment with
strong magnets, such as
microwave ovens, or large
loudspeakers.
• Do not place heavy or unstable
objects on the player.
• Do not place any objects other
than discs on the disc tray.
Doing so may cause damage to
the player or the object.
• When you move the player,
take out any discs. If you
don’t, the disc may be
damaged.
• When you move the player,
disconnect the AC power cord
(mains lead) and all other
cables from the player.
On power sources
• The player is not disconnected
from the AC power source
(mains) as long as it is
connected to the wall outlet,
even if the player itself has
been turned off.
• If you are not going to use the
player for a long time, be sure
to disconnect the player from
the wall outlet. To disconnect
the AC power cord (mains
lead), grasp the plug itself;
never pull the cord.
• Observe following points to
prevent the AC power cord
(mains lead) being damaged.
Do not use the AC power cord
(mains lead) if it is damaged,
as doing so may result in an
electric shock or fire.
– Do not pinch the AC power
cord (mains lead) between
the player and wall, shelf,
etc.
– Do not put anything heavy
on the AC power cord
(mains lead) or pull on the
AC power cord (mains lead)
itself.
On cleaning
Clean the cabinet, panel, and
controls with a soft cloth. Do not
use any type of abrasive pad,
scouring powder or solvent such
as alcohol or benzine.
On cleaning discs, disc/
lens cleaners
Do not use cleaning discs or
disc/lens cleaners (including wet
or spray types). These may cause
the apparatus to malfunction.
On replacement of parts
In the events that this player is
repaired, repaired parts may be
collected for reuse or recycling
purposes.
Copyrights and
Trademarks
• This product incorporates
copyright protection
technology that is protect ed by
U.S. patents and other
intellectual property rights.
Use of this copyright
protection technology must be
authorized by Macrovision,
and is intended for home and
other limited viewing uses
only unless otherwise
authorized by Macrovision.
Reverse engineering or
disassembly is prohibited.
• “AVCHD” and the “AVCHD”
logo are trademarks of
Panasonic Corporation and
Sony Corporation.
• Java and all Java-based
trademarks and logos are
trademarks or registered
trademarks of Sun
Microsystems, Inc.
•, “XMB,” and “xross media
bar” are trademarks of Sony
Corporation and Sony
Computer Entertainment Inc.
• This product incorporates
High-Definition Multimedia
Interface (HDMI™)
technology. HDMI, the HDMI
logo and High-Definition
Multimedia Interface are
trademarks or registered
trademarks of HDMI
Licensing LLC.
• “Blu-ray Disc” is a trademark.
• “Blu-ray Disc,” “DVD+RW,”
“DVD-RW,” “DVD+R,”
“DVD-R,” “DVD VIDEO,”
and “CD” logos are
trademarks.
• “BD-LIVE,” “BD-LIVE”
logo, and “BONUSVIEW” are
trademarks of Blu-ray Disc
Association.
• “x.v.Colour” and “x.v.Colour”
logo are trademarks of Sony
Corporation.
• “BRAVIA Sync” and
“BRAVIA Sync” logo are
trademarks of Sony
Corporation.
• “PhotoTV HD” and the
“PhotoTV HD” logo are
trademarks of Sony
Corporation.
• Other system and product
names are generally
trademarks or registered
trademarks of the
manufacturers. ™ and ®
marks are not indicated in this
document.
On adjusting volume
Do not turn up the volume while
listening to a section with very
low level inputs or no audio
signals. If you do, the speakers
may be damaged when a peak
level section is played.
4
IMPORTANT NOTICE
Caution: This player is
capable of holding a still
video image or on-screen
display image on your
television screen
indefinitely. If you leave the
still video image or onscreen display image
displayed on your TV for an
extended period of time you
risk permanent damage to
your television screen.
Plasma display panel
televisions and projection
televisions are susceptible to
this.
If you have any questions or
problems concerning your
player, please consult your
nearest Sony dealer.
About this manual
• In this manual, “disc” is used
as a general reference for the
BDs, DVDs, or CDs unless
otherwise specified by the text
or illustrations.
• Icons, such as , listed
at the top of each explanation
indicate what kind of media
can be used with the function
being explained.
For details, see “Playable
Discs” (page 59).
• Instructions in this manual
describe the controls on the
remote. You can also use the
controls on the player if they
have the similar symbols as
those on the remote.
• The on-screen display
illustrations used in this
manual may not match the
graphics displayed on yo ur TV
screen.
• BDP-S363 is used for
illustration purposes.
• NEED-to-know information
(to prevent incorrect
operation) is listed under the
b icon. NICE-to-know
information (tips and other
useful information) is listed
under the z icon.
Before operating the player, please read “Terms and Conditions of Use and End User License
Agreement” (page 66).
7
Guide to Parts and
Controls
For more information, see the pages in
parentheses.
Remote
Number 5, AUDIO, 2 +, and N buttons have a
tactile dot. Use the tactile dot as a reference when
operating the player.
A THEATRE (page 16)
Switches to the optimum video mode for
watching movies automatically. When
connected with an AV amplifier
(receiver) using the HDMI cable, the
speaker output also switches
automatically.
When connected with a Theatre Modecompatible TV using the HDMI cable,
the TV’s video mode switches to Theatre
Mode.
b
The THEATRE button functions only when
connected to a Sony Theatre Mo de-compatible
AV amplifier (receiver) or Sony Theatre
Mode-compatible TV.
TV t (TV input select) (page 26)
Switches between TV and other input
sources.
TV [/1 (on/standby) (page 26)
Turns on the TV, or sets to standby mode.
[/1 (on/standby) (page 27)
Turns on the player, or sets to standby
mode.
B Number buttons (page 33, 51)
Enters the title/chapter numbers, etc.
2 (volume) +/– (page 26)
Adjusts the TV volume.
TIME (page 11)
Displays the elapsed/remaining playback
time in the front panel display. Each time
you press the bu tton, the display switches
between elapsed playback time and
remaining playback time.
AUDIO (page 47)
Selects the language track when multilingual tracks are recorded on BDROMs/DVD VIDEOs.
Selects the sound track on CDs.
SUBTITLE (page 47)
Selects the subtitle language when multilingual subtitles are recorded on BDROMs/DVD VIDEOs.
ANGLE
Switches to other viewing angles when
multi-angles are recorded on BD-ROMs/
DVD VIDEOs.
8
C Colour buttons (red/green/
yellow/blue)
Short cut keys for selecting items on
some BD’s menus (can also be used for
BD’s Java interactive operations).
D TOP MENU (page 32)
Opens or closes the BD’s or DVD’s Top
Menu.
POP UP/MENU (page 32)
Opens or closes the BD-ROM’s Pop-up
Menu, or the DVD’s menu.
OPTIONS (page 32, 37)
The options menu that can be selected
appears on the screen.
HOME (page 30, 39)
Enters the player’s home menu.
Exits the home menu when a CD is
inserted.
RETURN
Returns to the previous display.
</M/m/,
Moves the highlight to select a displayed
item.
Centre button (ENTER)
Enters the selected item.
E ./> (previous/next)
Skips to the previous/next chapter, track,
or file.
To go to the beginning of the previous
track, press . twice.
/ (instant replay/instant
advance)
Replays the scene/briefly fast forwards
the scene.
Each time you press , briefly fast
forwards the current scenes for 15
seconds.
Each time you press , briefly replays
the current scenes for 10 seconds.
m/M (fast reverse/fast
forward)
Fast reverses/fast forwards the disc when
pressed during playback.
Each time you press the button, search
speed changes as follows*:
Playback direction
M1 (×10) t M2 (×30) t M3
(×120)
Reverse direction
n (×1) t m1 (×10) t m2 (×30)
t m3 (×120)
When you press and hold the button, fast
forward/fast reverse continues at the
selected speed until you release the
button.
* Search speed does not change when playing
CDs and MP3 audio tracks.
Speed multiple values are approximate.
– To resume normal playback, press N.
To play in slow, freeze frame (playback
direction only)
Plays BDs/DVDs in slow motion when
M is pressed for more than one second
in pause mode.
Plays one frame at a time when M is
pressed briefly in pause mode.
– To resume normal playback, press N.
N (play) (page 30)
Starts or re-starts playback.
Resumes playback from the point where
you press x (Resume Play).
Plays a slideshow when a disc containing
JPEG image files is inserted.
DISPLAY (page 34)
Displays the playb ack information on the
screen.
X (pause)
Pauses or re-starts playback.
x (stop)
Stops playback and remembers the stop
point (resume point) (page 31, 36).
The resume point for a title/track is the
last point you played or the last photo for
a photo folder.
F (light) (BDP-S363 only)
Lights up the 4 and 5 buttons (except
</M/m/, and ENTER) and is useful
for operation in the dark.
,continued
9
Front panel
The N button has a tactile dot. Use the tactile dot as a reference when operating the player.
A [/1 (on/standby) (page 27)
Turns on the player, or sets to standby
mode.
B Disc tray (page 30)
C Blu-ray Disc indicator
Lights up in white when the player is
turned on.
Lights up in blue when playing BDs.
D Front panel display (page 11)
E Remote sensor (page 26)
F N (play), x (stop) (page 30)
Starts or stops playback.
G Z (open/close) (page 30)
Opens or closes the disc tray.
To lock the disc tray (Child Lock)
You can lock the disc tray to prevent it being
opened by mistake.
When the player is turned on, hold down N
on the player for more than 10 seconds until
“LOCKED” appears in the front panel
display. The disc tray is locked.
To unlock the disc tray, hold down N on the
player until “UNLOCK” appears in the front
panel display.
10
Front panel display
A N, X
Lights up during playback or pause.
B HD (page 42)
Lights up when outputting 720p/1080i/
1080p video signals from the HDMI
OUT jack or 720p/1080i video signals
from the COMPONENT VIDEO OUT
jacks.
C HDMI (page 15)
Lights up when an HDMI device is
recognised.
D EXT (page 23)
Lights up when the external memory is
recognised.
E Playback information
You can check the time information.
Press TIME repeatedly during playback.
The display changes as follows.
When playing a BD-ROM/DVD VIDEO
Elapsed time of the current title
r
Remaining time of the current title
When playing a CD
Elapsed time of the current track
r
Remaining time of the current track
r
Elapsed time of the current disc*
r
Remaining time of the current disc*
* Except MP3 audio tracks
F Network connection indicator
Lights up when accessing the network
and downloading the player’s software.
For details on downloading the player’s
software, see page 40.
z
“T” (Title or Track), “C” (Chapter), or “D”
(Disc) may be displayed depending on the
disc.
,continued
11
Rear panel
A DIGITAL OUT (COAXIAL) jack
(page 21)
B LINE OUT (R-AUDIO-L) jacks
(page 17, 18, 22)
C LINE OUT (VIDEO) jack (page 18)
D DIGITAL OUT (OPTICAL) jack
(page 21)
E Ventilation holes
The ventilation fan is inside the player.
F EXT slot (page 23)
G AC IN terminal (page 25)
H COMPONENT VIDEO OUT
B/CB, PR/CR) jacks (page 17)
(Y, P
I HDMI OUT jack (page 15, 20)
J LAN (100) terminal (page 24)
12
Hookups and
Settings
Hooking Up the Player
Check that you have the following items.
• Mains lead (1)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
Follow steps 1 through 7 to hook up and
adjust the settings of the player. Do not
connect the mains lead until you reach
“Step 5: Connecting the Mains Lead”
(page 25).
Hookups and Settings
13
Step 1: Connecting to Your TV
About video/HDMI OUT jacks
The player has the following video jacks. Connect the player to your TV according to the input
jacks on your TV.
When connecting the player to your TV using the HDMI cable, you can enjoy high quality
digital pictures and sound through the HDMI OUT jack.
Jack typeVideo resolution Hookup
High
quality
Digital
Analogue
High Definition:
1080/24p, 1080p,
1080i, 720p
Standard Definition:
576p/480p, 576i/
480i
High Definition:
1080i, 720p
Standard Definition:
576p/480p, 576i/
480i
See “Connecting to an
HDMI jack” (page 15).
See “Connecting to
component video jacks
(Y, Pb/Cb, Pr/Cr)”
(page 17).
Standard
quality
b
• Plug in cables securely to prevent unwanted
noise.
• Refer to the instructions supplied with the
components to be connected.
• You cannot connect this player to a TV that does
not have a video input jack.
• Do not apply too much pressure on the connect ing
cables. Pushing against the cabinet wall, etc., may
damage the cables or jacks.
Standard Definition:
576i/480i
See “Connecting to
audio/video jacks”
(page 18).
To connect to a TV with DVI input
Use an HDMI-DVI converter cable (not
supplied). The DVI jack will not accept any
audio signals, so you have to use another
audio connection in addition to this
connection (page 19).
Furthermore, you cannot connect the HDMI
OUT jack to DVI jacks that are not HDCP
compliant (e.g., DVI jacks on PC displays).
14
Connecting to an HDMI jack
Connect the player and your TV using an HDMI cable to enjoy high quality digital pictures and
sound through the HDMI OUT jack.
If you connect a Sony TV that is compatible with the “Control for HDMI” function (page 16),
refer to the operating instructions supplied with the TV.
If you connect a 1080/24p- or 1080p-compatible TV, use a High Speed HDMI cable.
Blu-ray Disc/DVD player
HDMI cable (not supplied)
Hookups and Settings
Notes on connecting to the HDMI OUT jack
Observe the following as improper handling
may damage the HDMI OUT jack and the
connector.
• Carefully align the HDMI OUT jack on the
rear of the player and the HDMI connector
by checking their shapes. Make sure the
connector is not upside down or tilted.
TV
• Be sure to disconnect the HDMI cable when
moving the player.
• If you place the player on a cabinet with the
HDMI cable connected, do not apply too
much pressure to the cabinet wall. It may
damage the HDMI OUT jack or the HDMI
cable.
• When connecting or disconnecting, do not
screw in or rotate the HDMI connector.
About indicators for HDMI connection
When the connected HDMI-compatible
component is recognised, the HDMI
indicator lights up in the front panel display.
,continued
15
b
• Not all high definition television sets are fully
compatible with this product and may cause
artifacts to be displayed in the picture. In the case
of 480i/576i/480p/576p/720p/1080i/1080p scan
picture problems, it is recommended that the user
switch the connection to the LINE OUT VIDEO
jack. If there are questions regarding our TV set
compatibility with this model 480i/576i/480p/
576p/720p/1080i/1080p Blu-ray Disc/DVD
player, please contact our customer service
centre.
• If the picture is not clear, not natural or not to your
satisfaction, chan ge the video output resolution in
step 3 of “Output Video Format” under the
“Video Settings” setup (page 42).
• Be sure to use only an HDMI cable that bears the
HDMI logo.
About the BRAVIA Sync
features (for HDMI connections
only)
By connecting Sony components that are
compatible with the “Control for HDMI”
function with an HDMI cable (not supplied),
operation is simplified as below:
•One-Touch Play
With one touch of the following buttons, the
connected TV turns on and the input
selector on the TV is switched to the player
automatically.
– [/1
– HOME: The home menu appears
automatically (page 9, 30, 39).
– N: Playback starts automatically
(page 31).
• System Power-Off
When you turn off the TV using TV [/1 or
the power button on the TV’s remote, the
player and HDMI-compatible components
turn off automatically.
•Theatre
When you press THEATRE, the player
automatically switches to the optimum
video mode for watching movies. When
connected with a Sony AV amplifier
(receiver) using the HDMI cable, the
speaker output also switches automatically.
When connected with a Theatre Modecompatible TV using the HDMI cable, the
TV’s video mode switches to Theatre
Mode. Press the button again to return to the
original setting.
• Language Follow
When you change the language for the onscreen display on your TV, the player’s
language for the on-screen display is also
changed after turning the player off and on.
To prepare for the BRAVIA Sync features
Set “Control for HDMI” to “On” in the
“System Settings” setup (page 49).
For details on settings of your TV or other
connected components, refer to the operating
instructions supplied with the TV or
components.
z
• When connecting the Sony TV that is compatible
with the “Control for HDMI” Easy Setting
function using the HDMI cable, the “Control for
HDMI” setting of the player automatically
switches to “On” if the “Control for HDMI”
setting on the connected TV is set to “On.” Refer
to the operating instructions supplied with the
TV.
• When connecting the Sony TV that is compatible
with the BRAVIA Sync features using the HDMI
cable, you can control the basic functions of the
player with the TV’s remote if the “Control for
HDMI” setting on the connected TV is set to
“On.” Refer to the op erating instructions supplied
with the TV.
b
Depending on the connected component, the
“Control for HDMI” function may not work. Refer
to the operating instructions supplied with the
component.
16
Connecting to component video jacks (Y, PB/CB, PR/CR)
Connect the COMPONENT VIDEO OUT jacks of the player and your TV using a component
video cable (not supplied). You can enjoy high-quality pictures.
Be sure to connect to the LINE OUT (R-AUDIO-L) jacks using the audio/video cable (not
supplied).
Blu-ray Disc/DVD player
Hookups and Settings
(green)(red)(blue)
Component video
cable (not supplied)
(green)(red)(blue)
Match the colour of the plug to
that of the jack.
: Signal flow
b
When you connect the player and TV using a
component video cable, disconnect the video plug
(yellow) of the audio/video cable (not supplied).
(red)(white)
Audio/video cable
(not supplied)
(red)(white)
Match the colour of the plug to
that of the jack.
TV
,continued
17
Connecting to audio/video jacks
Connect the LINE OUT (VIDEO, R-AUDIO-L) jacks of the player and your TV using the
audio/video cable (not supplied). You can enjoy standard quality pictures and sound.
Blu-ray Disc/DVD player
(red)(white)(yellow)
Audio/video cable
(not supplied)
(red)(white)(yellow)
Match the colour of the plug to
that of the jack.
18
: Signal flow
TV
Step 2: Connecting to Your AV Amplifier (Receiver)
About audio/HDMI OUT jacks
The player has the following audio jacks. Connect the player to your AV amplifier (receiver)
according to the input jacks on your AV amplifier (receiver).
Jack typeHookup
DigitalSee “Connecting to an HDMI jack” (page 20).
See “Connecting to digital jacks (OPTICAL/
COAXIAL)” (page 21).
AnalogueSee “Connecting to audio L/R jacks” (page 22).
z
For correct speaker location, refer to the operating
instructions supplied with the connected
components.
Hookups and Settings
,continued
19
Connecting to an HDMI jack
If your AV amplifier (receiver) has an HDMI input, use this connection. You can enjoy higher
quality sound from the connected AV amplifier (receiver).
To enjoy 7.1 channel sound, use a High Speed HDMI cable.
If you connect a Sony AV amplifier (receiver) that is compatible with the “Control for HDMI”
function (page 16), refer to the operating instructions supplied with the AV amplifier (receiver).
Blu-ray Disc/DVD player
HDMI cable (not supplied)
AV amplifier (receiver)
1 Connect the HDMI OUT jack of the
player and your AV amplifier
(receiver).
2 Set “BD Audio Setting” to “Direct” in
the “Audio Settings” setup (page 45).
To enjoy the secondary audio
(commentary), set “BD Audio Setting”
to “Mix.”
20
HDMI cable (not supplied)
TV
z
Check the following settings:
– “Audio Output Priority” is set to “HDMI” in the
“Audio Settings” setup (page 44).
– “Audio (HDMI)” is set to “Auto” in the “Audio
Settings” setup (page 44).
b
Not all HDMI-compatible AV amplifiers
(receivers) accept 8ch Linear PCM signals. Refer as
well to instructions supp lied with the connected AV
amplifier (receiver).
Connecting to digital jacks (OPTICAL/COAXIAL)
If your AV amplifier (receiver) has a Dolby*1 Digital, Dolby Pro Logic, or DTS*2 decoder and
a digital input jack, you can enjoy Dolby Digital (5.1ch), Dolby Pro Logic (4.0ch), or DTS
(5.1ch) surround effects.
Coaxial digital cable
(not supplied)
Blu-ray Disc/DVD player
or
Optical digital cable
(not supplied)
Hookups and Settings
: Signal flow
1 Connect the digital jack of the player
and your AV amplifier (receiver).
2 Set “Audio Output Priority” to
“Coaxial/Optical” in the “Audio
Settings” setup (page 44).
3 Make the appropriate settings in
“Dolby Digital” and “DTS” under the
“Audio Settings” setup (page 45).
Otherwise, no sound or a loud noise will
come from your speakers.
AV amplifier (receiver)
*1
*2
,continued
21
Connecting to audio L/R jacks
If your AV amplifier (receiver) only has L and R audio input jacks, use this connection.
Blu-ray Disc/DVD player
(white)(red)
Audio/video cable (not supplied)
(white)(red)
Match the colour of the plug
to that of the jack.
22
AV amplifier (receiver)
: Signal flow
Loading...
+ 49 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.