Sony BDPS-2000-ES Service manual

BDP-S2000ES

RMT-B101A

SERVICE MANUAL

Ver. 1.0 2007.09

SPECIFICATIONS

System

Laser: Semiconductor laser

Outputs

(Jack name: Jack type/Output level/Load impedance)
AUDIO OUT L/R:

Phono jack/2 Vrms/10 kilohms

DIGITAL OUT (OPTICAL):

Optical output jack/–18 dBm (wave length 660 nm)

DIGITAL OUT (COAXIAL):

Phono jack/0.5 Vp-p/75 ohms

5.1CH OUTPUT:

Phono jack/2 Vrms/10 kilohms

HDMI OUT:

HDMI 19-pin standard connector

COMPONENT VIDEO OUT(Y, PB, PR):

Phono jack/Y: 1.0 Vp-p/PB, PR: progressive or interlace
= 0.7 Vp-p/75 ohms

VIDEO: Phono jack/1.0 Vp-p/75 ohms
S VIDEO: 4-pin mini DIN/Y:

1.0 Vp-p, C: 0.286 Vp-p/75 ohms

US Model

Canadian Model

General

Power requirements:

120 V AC, 60 Hz

Power consumption: 33 W
Dimensions (approx.):

430 × 105 × 362 mm (17 × 4 1/4 × 14 3/8 in.) (width/height/depth)
incl. projecting parts

Mass (approx.): 7.6 kg (16 3/4 lb)
Operating temperature:

5 ºC to 35 ºC (41ºF to 95ºF)

Operating humidity:

25 % to 80 %

Supplied accessories

• Video cord (phono plug × 1) (1)

• Stereo audio cord (phono plug × 2) (1)

• Power cord (1)

• Remote commander (remote) (1)

• Size AA (R6) batteries (2)

Specifications and design are subject to change without notice.

TM

BLU-RAY DISC PLAYER

SERVICE NOTE

1. DISK REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)

2 side panel (L) assy

5 flexible flat cable

qa two screws

(P3 × 3)

1 two screws

(BV3)

0 top panel block assy

7 three screws (BV3)

9 five screws (BV3)

8 three screws (BV3)

3 two screws

(BV3)

qs front display block assy

4 side panel (R) assy

6 flexible flat cable

qa two screws

(P3 × 3)

qd Insert the clip.

qf Open the tray.

– 2 –