Sonance BPS6 TL Specification Sheet
THIN-LINE
SUBWOOFER
BPS6 TL
Overview
Sonance is pleased to introduce the new BPS6 Thin Line
bandpass subwoofer designed for challenging install
applications. We recognize that many home interiors are
faced with space limitations and mounting restrictions
within walls and ceilings, leaving clients with limited options
for quality audio. The new Sonance BPS6 TL is the perfect
solution to add performance audio to any room without
impeding on the design of the space.
Key Features
Aesthetics
• Designed to visually disappear among surrounding
downlight fixtures
• Low profile paintable grille
• Round or square adapter to match the geometry of
architectural elements within the room
Performance
• Designed using state-of-the-art computer modeling
software to vastly improve magnetic field and suspension
linearity for consistent sonic performance at any SPL for
best-in-class performance
• Improved low frequency performance over past
bandpass subwoofers
Installation
• One-piece paintable grille
• Fits easily into a 2 x 4 stud bay with its 3 3/8” mounting depth
• Flexible install applications with in-wall and
in-ceiling accessories
BPS6 TL
Dimensions
BPS6 TL
BPS6 TL SUBWOOFER
Width: 11” (279mm)
Depth: 3 3/8” (86mm)
Length: 39 3/8” (1000mm)
BPS6 TL PORT TUBE
Diameter: 3” (76mm)
Length: 22” (559mm)
Visual Performance
Required Accessory Dimensions
VPBPC3R TL BANDPASS CONNECTOR
Diameter: 4 9/32” (109mm)
Cut Out Diameter: 3 7/8” (99mm)
Depth: 3 27/32” (98mm)
* 4” hole saw recommended for cut out.
WidthWidth
DepthDepth
Diameter
Port Tube
Depth
Length
Width
Length
Port Tube
Cut Out
Diameter
Depth
Diameter
Architectural Series
Required Accessory Dimensions
ASBPC3RS TL BANDPASS CONNECTOR
Diameter: 3 15/16” (100mm)
In Surface
Depth: 3 15/16” (100mm)
Finishing Ring
Depth: 23/32” (18mm)
Specifications
BPS6 TL In-Wall & In-Ceiling Thin-line Subwoofer
Sku: 93324
Unit of Measure: Each
Woofer: 13” (330mm) x 3” (76mm)
Laminated Carbon Fiber Cone with a
rubber surround, dual voice coil
Frequency Response: 38Hz - 125Hz ±3dB
Impedance: 6 Ohms nominal, 4 Ohms minimum
Power Handling:
Sensitivity: 87dB @ 2.83V / 1 meter
Dimensions: 11” x 3 3/8” x 39 3/8”
(W x D x L) (279mm x 86mm x 1000mm)
Shipping Weight: 40 lbs (18.68kg) each
Port Tube
Dimensions (Dia x L): 3” x 22” (76mm x 559mm)
50 Watts minimum; 150 Watts maximum
In Surface
Depth
Finishing
Ring Depth
Diameter Diameter
VPBPC3R TL Bandpass Connector
Sku: 93334
Unit of Measure: Each
Dimensions (Dia x D): 4 9/32” x 3 27/32” (109mm x 98mm)
Grille: VPBPC3R shipped with Round 4 29/32”
(124mm) perforated steel grilles
ASBPC3RS TL Bandpass Connector
Sku: 93335
Unit of Measure: Each
Dimensions (Dia x D): 3 15/16” x 13/16” (100mm x 20mm)
Loading...