Thank you for choosing this Soehnle Professional product. All the features of this product were
designed to the state of the art and are optimised for simple and straightforward use.
If you have any queries or experience any problems with your appliance not addressed in the
operating manual, please contact your Soehnle Professional service partner, or visit us on the web
at www.soehnle-professional.com.
1.1Notes on the Operating Manual
This operating manual is a short version of the Program Terminal 3020 and is intended to help you
through your first steps with the scale and entry-level operations.
This detailed manual is supplied on the CD so that you can obtain maximum performance from your
new appliance.
It contains complete information on the application programs. It also describes the Setting mode
which helps you to set the scales to meet your specific requirements.
All information refers to the standard version of the Program Terminal 3020.
Differences may occur with special versions.
1.2Description of the appliance
Technical data
• Housing made of stainless steel, protection class IP 67, integrated power supply 230VAC, optional
DC/DC converter, 12/24/48 V.
• Membrane keyboard with a total of 19 keys, 1 function key, 1 organisation data key, alphanumeric
keys.
• Display: dot matrix 240 x 64 pixels, backlit and dimmable.
• Memory capacity: fixed value memory for a total of 400 fixed values, valid for all programs,
failsafe, alibi memory for 2 million inputs optional.
• Ports: 1 x RS 232, additional interfaces optional, including bus, analogue output 0 - 20mA.
• Operating temperature: -10°C to +40°C
• Approvable to Precision Class III for n = 6000e for multirange and multidivision scales.
• Approvable weighing range 0.1 kg to 120 t.
• Smallest permissible input signal per calibration value = 0.25µV.
• Load cell power supply, either 5VDC or 5VAC, 33Hz.
33
English
1.3Installation and commissioning
Before connecting up the appliance, make sure that the power supply complies with the specifications on the appliance nameplate, and the power plug version conforms to local regulations. Place
the connected scales on a level and stable surface. Select an installation site where the appliance
is not exposed to shocks, vibrations, intense heat or cold, draughts, chemicals and moisture.
The appliance may only be opened by trained service technicians. Before working on the appliance,
unplug the power supply.
After power-on, the measured values will stabilise after a warm-up period of 30 minutes. Further
information on power-on is provided in the Operating Manual 3020 on the CD.
Connections
Power supply
Ground (GND)
Scale 1
Interfaces 1 + 2
Pressure compensation membrane
Anybus interface
1.4Operating concept, keys and display symbols
The setting options are divided into two function ranges:
Setting mode
Here you can enter user-definable settings on the appliance to adapt the weighing system to your
requirements. For a detailed description, refer to Chapter 2 Setting mode in the manual.
Program settings
General
Weighing + taring
Totalising + batching
Counting
Checking
44
Terminal
Version
Display
Keypad
Date/time
Organisation data
User password
Reset terminal
Scale
Scale parameters
Data processing
Data transfer
Alibi memory
Interface 1
Interface 2
Print template
Data processing settings
Fieldbus
Barcode
Service
Only for service
technicians
Program mode
Here, select the required weighing application program.
After selecting and activating the application program, the scale is ready to operate.
Function key
The F function key is for calling up functions.
It assumes different functions depending on how it is assigned.
The current function is assigned in Setting mode.
Navigation in Setting mode
Moves the marking arrow up the list
Moves the marking arrow down the list
Exits Setting mode
Calls the marked menu option
Accepts (saves) an input or change
English
Returns to the next higher level
(Returns without saving a change)
Clears an item
Moves the cursor one step to the right
Moves the cursor one step to the left
55
English
Input and control keys
The following keys are available for input and control:
...
Numeric keys to type in numerical values
Multiple programming of numeric keys to type in alphabetic characters
Calls organisation data
Clears last number
Info key, electronic nameplate with reference data
Scale change key (press in succession)
Call tare memory
Tare key / Cursor down / Cursor right
Zeroing key
Print key / Enter key
On / Off
66
Display
The display shows a number of situative views. It is divided into display panes.
English
ADDITIONAL INDICATOR
SYMBOL BAR
DISPLAY PANE
Symbols in the display symbol bar
Alibi memory capacity 100%
Alibi memory capacity 80%
Alibi memory capacity empty
Keylock
Second unit
Multirange/Multidivision 1
Multirange/Multidivision 2
Multirange/Multidivision 3
Resolution X10
Zero
Additional indicator: Displays second units, weight
values for counting, differences with setpoint, etc.
Press the F key to activate as required.
Symbol bar: Displays information on the status of the
activated measuring point.
Display pane: Displays weight values, quantities, unit
characters.
Hold function active
Unit character
Symbol for standstill
After placing the weighing product on the scale, the scale requires some time to settle.
Until the scale reaches standstill, the unit character (kg, g) is not displayed.
The unit character only appears when the scale reaches standstill and a stable value is obtained
(clip off).
77
English
2.Basic functions
The basic functions are similar or identical for all application programs.
2.1Power on/off
Power-on
After power-on and during the run-up phase, the Soehnle Professional logo is
displayed.
The measuring points are briefly listed as they are detected.
The scale is zeroed after the power-on routine. (This may vary with
non-approved calibration). On power-on, the last application program
activated is displayed.
Zero range limits at power-on
Approvable: Zero range at power-on 20% of the weighing range.
The default value is -5% to +15% of the weighing range.
Non-approved: Zero range at power-on -99% to +99% of the weighing range.
If the appliance is switched on outside the zero range, the scale displays error
message Error 50 / 51 Value outside zero range limit.
When the cause for overload or underload is rectified, the scale is zeroed without
having to switch the appliance on and off and is ready to operate.
Response to power failure
The scale returns to the previous settings when power is restored.
Power-off
Press the On/Off key.
If the activated measuring point is loaded or a menu is open, the scale switches
off only 3 seconds after the On/Off key is pressed.
2.2Selecting a program
Select one of the application programs from the list.
Call up the setting menu by pressing the Print key and F key
(press simultaneously).
• The arrow points to "Program Settings" .
• Press the Print key: the arrow points to "General".
• Press the Print key: the arrow points to "Programs".
• Press the Print key: the arrow points to the program last selected.
• Select the program you wish to activate by pressing the Tare key or F key.
• Confirm the program by pressing the Print key.
88
2.3Zeroing
Press the zeroing key to correct minor deviations from the zero point,
e.g. caused by soiling on the scale.
Zero range approvable and non-approvable: -1% to +3% of the weighing range.
If zeroing is not possible, the error message "Above zero range limit" or
"Below zero range limit" appears for two seconds in the display.
Zero tracking
Zero tracking automatically corrects minor deviations in the zero display.
2.4X10 display
Shows the weight value with an additional decimal point at ten times the
resolution. Switch to the x10 display by pressing the Print key and then the
Zeroing key, and hold them both down simultaneously.
Approvable scale
If the scale is approvable, the ten times resolution appears and switches off
after 5 seconds.
Non-approved scale
If the scale is calibrated as non-approved, the ten times resolution appears
constantly in the display. Press the key once to activate the ten times resolution
function. Press the key again to deactivate the ten times resolution function.
English
99
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.