On - Off
Switch on
(Only when the scale is not loaded)
The main display sets to zero after the test routine.
The scale is ready for use now.
Zero setting of the display within
-1%......+3% f. max.
Manipulation time < 3 sec.
OVERLOAD:
If the weight is ≥≥≥≥ Overlaod
(Set point 1)
LED red „illuminates“
Operating manual Basic-Terminal Air Luggage 3015 Version V1.0 Date: 31.08.07 Page 1 of 4
No part of this document may be reproduce, stored in information retrieval systems, or transmitted, in any form or by any means- electronic, mechanical, photocopying, recording, or otherwise (German Civil Code)
Soehnle Professional GmbH
Soehnle Professional GmbH & Co. KG
Soehnle Professional GmbHSoehnle Professional GmbH
Place the next item to be weighed on the scale
Continue as under 2.
Displaying the total memory.
Number of individual weighings
Deleting the total memory and the number of
Individual weighings
Operating manual Basic-Terminal Air Luggage 3015 Version V1.0 Date: 31.08.07 Page 2 of 4
No part of this document may be reproduce, stored in information retrieval systems, or transmitted, in any form or by any means- electronic, mechanical, photocopying, recording, or otherwise (German Civil Code)
Soehnle Professional GmbH
Soehnle Professional GmbH & Co. KG
Soehnle Professional GmbHSoehnle Professional GmbH
The scale sets the value zero
automatically when it is switched
tolerance range - - 0 - - is displayed
Underload: Only the bottom
horizontal lines appear on the
display
Overload: Only the top horizontal
lines appear on the display. The
maximum weighing range has
been exceeded.
The zero setting range has been
exceeded
Bei allen anderen ERROR- Meldungen
Elimination
Remove the items and if necessary
also the dirt from the weighing
platform. If the scale does not indicate
zero after a couple of seconds, you
should contact your service partner
Switch the scales off and on again. The
zero point will be reset automatically.
Remove some of the items from the
weighing platform.
Operating manual Basic-Terminal Air Luggage 3015 Version V1.0 Date: 31.08.07 Page 3 of 4
No part of this document may be reproduce, stored in information retrieval systems, or transmitted, in any form or by any means- electronic, mechanical, photocopying, recording, or otherwise (German Civil Code)
Soehnle Professional GmbH
Soehnle Professional GmbH & Co. KG
Soehnle Professional GmbHSoehnle Professional GmbH
Setpoint Overload (red „LED)
One range scale
Total memory
Zero message
Unit = Standstill
Number of luggage
Operating manual Basic-Terminal Air Luggage 3015 Version V1.0 Date: 31.08.07 Page 4 of 4
No part of this document may be reproduce, stored in information retrieval systems, or transmitted, in any form or by any means- electronic, mechanical, photocopying, recording, or otherwise (German Civil Code)
Soehnle Professional GmbH
Soehnle Professional GmbH & Co. KG
Soehnle Professional GmbHSoehnle Professional GmbH