SMC Networks WAP5110 Datasheet

WAP5110

802.11n Dual-Band Wireless Access Point

Product Overview

The WAP5110 is an indoor 802.11a/b/g/n dual-band, dual-radio enterprise AP with a 2x2 MIMO antenna configuration. Through its Gigabit Ethernet port the 802.11n dual-band wireless AP can connect to the backbone network. The WAP5110 supports 802.3af PoE, which enables the AP to be powered remotely by a PoE switch. An AC power adapter option is also included for locations where PoE is not available.

Key Features and Benefits

Wireless 802.11n Technology

Using 802.11n MIMO (Multiple Input Multiple Output) wireless technology, the AP supports two transmitting and two receiving antennas that extend range and increase the throughput by up to nine times that of existing Wi-Fi.

Full Management Capabilities

The WAP5110 supports Simple Network Management Protocol (SNMP v1/v2c/v3), including MIB II and MIB I. The IEEE 802.1X authentication protocol supports Extensible Authentication Protocol (EAP) MD5, Transport Layer Security (TLS), Protected EAP (PEAP), Tunneled TLS (TTLS), EAP-SIM, and EAP-AKA.

Advanced Traffic Management

Support for up to sixteen Virtual Access Point (VAP) interfaces per radio, which allows traffic to be separated for different user groups within the same service area. Each radio can support up to 100 wireless clients, shared between all VAPs, whereby the clients associate with each VAP in the same way as they would with physically separate APs. This means that each VAP can be configured with its own Service Set Identification (SSID), security settings, VLAN assignments, and other parameters, allowing the AP to serve a diverse range of client needs from a single unit.

Dual-Band Access Point

Easy on your budget and simple to install, the AP uses dynamic rate shifting to automatically match the best connection speed, keeping users connected to the network even while roaming.

Application Diagram

Network

AP Mode

VAP 1

AP Mode

VAP 2

VAP 0

WDS STA Mode

VAP 1

WDS AP Mode

VAP 0

WDS STA Mode

Core

WDS AP Mode

Between Access Points

VAP 0

Connect Your World ...

Switches | Wireless | Broadband | Carrier Ethernet | Network Management

WDS Links

VAP 1

AP Mode

VAP 2

AP Mode

WDS STA Mode

VAP 0

WDS STA Mode

VAP 1

WDS AP Mode

VAP 0

www.smc.com www.smc-asia.com

Features

Physical Features

One 10/100/1000BASE-T Gigabit Ethernet (RJ-45) port with

802.3af-compliant Power over Ethernet (PoE) support One console port with an RJ-45 connector Two LEDs: Power/Diag, WLAN1/WLAN2/LAN Four embedded omni antennas PoE 802.3af compliant

Standards

IEEE 802.11n 2.4 GHz and 5.0 GHz IEEE 802.11a 5.0 GHz IEEE 802.11b/g, 2.4 GHz IEEE 802.3, IEEE 802.3u, IEEE 802.3ab IEEE 802.3af Power over Ethernet (PoE) IEEE 802.11h Regulatory Domain Selection Wi-Fi Multimedia (WMM) Wireless Distribution System (WDS)

Wireless Frequency

802.11g/n:

2.4 ~ 2.4835 GHz (US, Canada)

2.4 ~ 2.4835 GHz (ETSI, Japan)

802.11b:

2.4 ~ 2.4835 GHz (US, Canada)

2.4 ~ 2.4835 GHz (ETSI)

2.4 ~ 2.497 GHz (Japan)

802.11a/n:

5.15 ~ 5.25 GHz (lower band) US/Canada, Europe, Japan

5.25 ~ 5.35 GHz (middle band) US/Canada, Europe, Japan

5.725 ~ 5.825 GHz (upper band) US/Canada

5.50 ~ 5.70 GHz Europe

Wireless Features

VAP (Virtual Access Point) support with up to 16 SSIDs Operation modes: AP Mode, Point-to-Point WDS, Point-to-Multiple points WDS, WDS With AP Transmit power adjustment IEEE 802.11h DFS/DFS2 and automatic TPC Traffic Control for each SSID Band Preference for same SSID services on dual band Dynamic Channel Selection for noisy environment Rate Selection to disable low data rate access Client connection preemption (n > ag > b) in case service capability is full Auto-channel selection

Security

WEP 64/128-bits Wi-Fi Protected Access (WPA/WPA2) WPA/WPA2 (PSK) over WDS Secure SSH (Secure Sockets Shell), Telnet Secure Sockets Layer (SSL) remote management login HTTPS Access control list RADIUS authentication EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, EAP-SIM, and EAP-AKA SSID broadcast disable

Contact

Network Management

Industrial CLI (Command Line Interface) Telent, SSH Web-based Management (HTTP and HTTPS) SNMP management v1/v2c/v3 Software download and upgrade by TFTP, FTP, or HTTP Configuration file backup and restore by TFTP or FTP System Information – AP status, station status, event logs Dual image SNTP Country selection Scheduling Rebooting Radius Accounting IPv4 and IPv6 dual stack support Link Integrity to disable WiFi service while uplink is not available

Antenna

Type: PCB type Gain: 2dBi in 2.4GHz, 3dBi in 5GHz

Regulatory Compliance

FCC Part 15 Subpart B CE

Radio Signal Certification

FCC Part 15C 15.247, 15.207 (2.4GHz) EN 300 328 EN 301 489-1 EN 301 489-17 NCC (Taiwan)

Mechanical

Dimensions: 14 x 14 x 4.8 cm (5.51 x 5.51 x 1.88 in.) Weight: 1.12 lbs (0.51 kg)

Power

Input: 100 or 240 VAC, 50-60 Hz Output:48 V/0.38 A Power Consumption: 10.56 W maximum

Environmental Specification

Temperature: Standard Operating: 0°C to 40°C (32°F to 104°F) Storage: -20°C to 70°C (-4°F to 158°F) Humidity: 15% to 95% (non-condensing)

Warranty

Please check www.smc.com for the warranty terms in your country/region.

is a trademark of SMC Networks.

Edge-Core Networks Corporation

Worldwide Corporate and Sales Headquarters

No. 1 Creation Road III,

Hsinchu Science Park,

30077, Taiwan, R.O.C.

Tel: +886 3 5638888 Fax: +886 3 6686111

Singapore

15 Enggor Street

#10-04, Realty Centre

Singapore 079716

Tel: 65-63387667 Fax: 65-63387767

Check www.smc-asia.com or www.smc.com for your local country contact information

Connect Your World ...

Switches | Wireless | Broadband | Carrier Ethernet | Network Management

www.smc.com www.smc-asia.com

SMC-DS-0713-01