Sloan WES BPW-1150 User Manual

►► Code NumberCode Number

3729726

►► DescriptionDescription

Exposed Bedpan Washer Water Closet Flushometer with Dual Flush Feature,
for floor mounted or wall hung top spud bowls.

►► Flush CycleFlush Cycle

Model WES BPW-1150-1.6/1.1 High Efficiency (DOWN - 1.6 gpf/ 6.0 Lpf, UP -

1.1 gpf/ 4.2 Lpf)

►► SpecificationsSpecifications

Single Flush, Quiet, Exposed, Diaphragm Type, Chrome Plated Closet
Flushometer with the following features:

● ● Lifting Handle UP initiates reduced flush (1.1 gpf/4.2 Lpf), eliminating
liquid and paper waster, saving a ½-gallon of water

● ● Pushing Handle DOWN initiates full flush (1.6 gpf/6.0 Lpf), eliminating all
waste

● ● Reduces water volume by up to 30% when activated UPWARDS

● ● Infrared Sensor with Multiple-focused, Lobular Sensing Fields for high and
low target detection

● ● Antimicrobial Coating on Handle Protects Against Germs

● ● Metal Non-Hold-Open Handle with Triple Seal Handle Packing

● ● 1” I.P.S. Screwdriver Bak-Chek® Angle Stop with Vandal Resistant Stop
Cap

● ● 1 1/2” Offset Flush Tube

● ● Vacuum Breaker with Flush Connection

● ● Spud Coupling and Spud Flange for 1½” Top Spud

● ● Sweat Solder Adapter with Cover Tube and Cast Wall Flange

● ● Non-Hold-Open Handle and No External Volume Adjustment to Ensure
Water Conservation

● ● Flush Accuracy Controlled by CID Technology

● ● Stop Seat and Vacuum Breaker molded from PERMEX® Rubber
Compound for Chloramine Resistance

● ● Includes two (2) adhesive backed Metal Wall Plates etched with
Instructions

Bedpan Washer Diverter Assembly with the following features:

● ● Solid One-piece Body Construction

● ● Solid Brass Spray Arm

● ● Counter Balanced Pivot Assembly and Diverter Valve Wall Support

● ● Valve Body, Cover, Tailpiece and Control Stop shall be in conformance
with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in
compliance to the applicable sections of ASSE 1037 and ANSI/ASME

112.19.2. Installation conforms to ADA requirements.

Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with
ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to
the applicable sections of ASSE 1037. Installation meets ADA height
requirements. Installation conforms to ADA requirements.

►► Compliance & CertificationsCompliance & Certifications

This space for Architect/Engineer Approval

Slimline® Bedpan Washers
SLOAN WES BPW 1150

2016-10-05 Page 1 of 1

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com