Sloan EAF-200-LT User Manual

►► Code NumberCode Number

3335055

►► DescriptionDescription

6 VDC Adapter Powered, Sensor Activated, Electronic Hand Washing
Faucet for pre-tempered or hot and cold water operation.

►► Flow RatesFlow Rates

☐ 0.5 gpm/1.9 Lpm Laminar (EAF-63 Standard)

►► SpecificationsSpecifications

Sensor Activated, Electronic, Chrome Plated Die-Cast Metal, Hand Washing
Faucet with the following features:

● ● Modular One-piece Construction with all Concealed Components
above deck

● ● Double Infrared Sensors with Automatic Setting Feature and
Microprocessor

● ● Magnetic Solenoid Valve

● ● Water Supply Connection with Flexible High-pressure Hose and Strainer

● ● 6 Volt DC Plug-in Adapter (must be ordered separately for Less
Adapter/Transformer (-LT) faucets)

● ● Appropriate Mounting Hardware included

►► AccessoriesAccessories

● ● Trim Plates must be specified and ordered separately.

● ● See Accessories Section of the Sloan Catalog for details on these and
other Shower Head variations.

►► Control CircuitControl Circuit

6 VDC — Includes Auto Set Range Adjustment

►► Sensor RangeSensor Range

Nominal: 4”-5” (102 mm - 127 mm)

Faucet Adaptive Self-adjustment Range: 2”-14” (51 mm - 356 mm) nominal

►► Time Out SettingTime Out Setting

2 minutes— Maximum time faucet will run upon continuous detection
(except for i.q.-Click models that are otherwise set in continuous run).

►► OPERATIONOPERATION

►► The new Optima i.q. faucet — Bringing intelligence toThe new Optima i.q. faucet — Bringing intelligence to

waterwater

Sloan’s new Optima i.q. EAF-200 Series electronic hand washing faucets
operate by means of a dual infrared sensor and microprocessor based
logic. The modular design incorporates all of the operating components of
the faucet, including the sensor, solenoid and circuitry above the sink within
a die-cast metal spout.

ISM models feature an integral temperature control lever which allows the
user to adjust the water temperature. This adjustment can also be
converted to a fixed setting. EAF faucets ordered without the ISM variation
must be connected to a single, pre-tempered water supply.

►► Compliance & CertificationsCompliance & Certifications

ASME A112.18.1-2005/CSA B125.1-05, ISO/IEC 17025

This space for Architect/Engineer Approval

Sloan Lino™ Faucet
EAF-200-LT

2016-11-04 Page 1 of 2

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com

As the user’s hands enter the beam’s effective range, the beam is
reflected back into the sensor receiver and activates the solenoid

valve allowing water to flow from the faucet. Water will flow until the

hands are removed or until the faucet reaches its automatic time out

limit setting.

Sloan Lino™ Faucet
EAF-200-LT

2016-11-04 Page 2 of 2

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com