Sloan EAF-200 User Manual

Code No. 0816728

Rev. 0 (08/07)

INSTALLATION INSTRUCTIONS

EAF-200/250/275 LINO AND SOLIS™

FAUCET EXTENSION KIT

SLOAN VALVE COMPANY • 10500 Seymour Avenue • Franklin Park, IL 60131

Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: [phone] or 1-847-671-4380

www.sloanvalve.com

Printed in the U.S.A. 08-07

Copyright © 2007 SLOAN VALVE COMPANY

The information contained in this document is subject to change without notice.

2. Install the Extension Kit

A. Install O-ring

onto Extension
Cylinder.

B. Remove flexible supply hoses.

C. Remove retainer nut, retainer, gasket

and stud.

D. Remove O-ring.

B. Install stud

included with kit,
into base of faucet.

D. Connect flexible

supply hoses
included with
Extension Kit into
base of faucet.

Refer to Installation Instruction Manual 0816490
included with your EAF-200 Series Faucet for
complete Faucet installation. Begin at Step 1B.

C. Guide Extension

Cylinder over
flexible supply
tubes and stud.

1. Remove the Retainer Nut, Retainer, Gasket, O-ring, Stud and Flexible Supply Hoses

A. Remove screw.

E. Replace and

tighten screw.

G. Tighten Adapters

(Adapters included

with EAF-35-A only).

F. Slide Extension

Cylinder to base
of faucet.