Skytron Stellar ST23 User manual

STELLAR SERIES • SURGICAL LIGHTS

FOCUSABLE LIGHTING SYSTEM WITH

EXTENDED DEPTH OF FIELD CONTROL

NON-STERILE

POSITIONING HANDLES

ST2319WC

360° RANGE OF MOVEMENT

(Pitch, Roll, Rotation)

110° VERTICAL

TRAVEL

SINGLE YOKE

BALANCE MECHANISM

LIGHT WEIGHT, EXTREMELY

DURABLE POLYMER LIGHTHEAD

POSITIONING/FOCUS

CONTROL HANDLE

INTRODUCTION

SKYTRON’s Stellar Series Surgical Lighting provides
advanced variable and fixed focus optics within separate
lightheads. Exceptionally durable, lightweight polymer
lightheads create the perfect balance of performance,
maneuverability and dependability. The Vertical
Segmented Reflector optics provide shadow controlled
illumination and a generous field size. Typical
applications include General, ASC ORs, Labor &
Delivery, Plastics, OB/GYN and Emergency rooms.

TECHNICAL DATA

Electrical: 120V, 60 Hz, 1 phase
Power Consumption: 400watts (1,360 BTU/hr)
Amperage: Approximately 4.25 amps, fuse protected.
Intensity: 226,800 lux (21,000 fc)
Color Temperature: 4,000K
Beam Temperature: Less than 25,000 microwatts per

cm2 as recommended by the I.E.S. handbook.

Current Leakage: Less than 30 microamps
Bulb Type: Halogen 24V/50W.
Fixture Weight: 151 lbs.
Moment Load: 580 ft. lbs.

STERILE

WALL CONTROL WITH

EXCLUSIVE SKYTRON SOF-START

BULB PROTECTION

ACCESSORIES

Wall Mounted Intensity Control provides continuous

intensity adjustment according to surgeon's requirements
and can be set for high or low line voltage to assure
maximum performance. Required, priced separately.

ARCHITECTURAL SPECIFICATIONS

Surgical lighting system shall consist of a dual radial arm
mounted 23" and 19" lightheads. Each lighthead to be
equipped with a sterilizable center positioning handle and
non-sterile positioning handles. Total system output is to
be 226,800 lux (21,000 foot-candles) at a color
temperature of 4,000K. System is to be designed
Halogen fuve-bulb and Halogen three-bulb to operate at

18.5V to 20.5V, 50W. Bulb life is protected by
SKYTRON's Sof-Start System. Wall Control provides
intensity adjustment and ON/OFF control. The system
shall be SKYTRON Model ST2319WC.

ST2319WC

ELEVATION VIEW

PLAN VIEW

45-1/2"

1155mm

2-3/4"

70mm

360°

360°

360°

fMinimum ceiling height: 8'-7". Consult your SKYTRON representative for lower ceiling heights and special applications.

110°

80"

2030mm

360°

360°

52-1/2"

1335mm

35-1/2"

900mm

38"

965mm

110°

360°

360°

3/4" Diameter

Conduit

Wall

Control

360°

360°

35-1/4"

895mm

360°

43"

1090mm

35-1/4"

895mm

360°

360°

78.34"

1990mm

35-1/4"

895mm

91"

2310mm

360°

REFER TO APPROPRIATE MOUNTING STRUCTURE GUIDELINE

• STANDARD MOUNTING STRUCTURE GUIDELINE

• SPECIFIC SEISMIC CALCULATIONS IF APPLICABLE

WALL CONTROL

3-1/2"

10"

1"

7-7/8"

5-7/8"

3-1/2"

4"

BACK

VIEW

7-5/8"

TOP VIEW

1"

1-1/16" Dia.

(2 places)

11-3/4"
10-1/4"

RECESS

MOUNT

FLANGE

12-7/16"

14"

6-7/8"

6mm Dia.

(4 places)

4mm Dia.

(4 places)

5000 36th Street SE • Grand Rapids, MI 49512

1.800.SKYTRON • 616.957.0500 • FAX: [phone]

4/05