Singing Machine SDL9039 User Manual
SDL9039
FIESTA PLUS
INSTRUCTION MANUAL
www.singingmachine.com
The Singing Machine® is a registered trademark of The Singing Machine Co.,Inc.
Warnings
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The Caution marking is located on the bottom panel.
DANGEROUS VOLTAGE: The lightning flash with arrowhead
symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous voltage within
the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral
triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying this product.
DRIPPING WARNING: This product shall not be exposed to dripping or
splashing, and no objects filled with liquids, such as vases, shall be placed
on the product.
VENTILATION WARNING: The normal ventilation of the product shall not be
impeded for intended use.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT AND FULLY INSERT.
CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectriqu subi,
même si le brouillage est susceptible d’encompromettre le fonctionnement.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm
entre le radiateur et votre corps.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
FCC WARNING: This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subjec t
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The rating information is located at the rear of the unit.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada licence-exempt RSS standard( s).
Operation is subject to the following two conditions: (1) This device may
not cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment should be installed and operated with a minumum distance
of 20 cm between the radiator and your body.
Important Safety Information
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the Manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with a cart , stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all ser vicing to qualified ser vice
personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. Do not place objects
filled with water, such as a vase, on the apparatus.
16. The AC mains plug is used as the power disconnect device
and it should remain readily accessible and operable during
intended use. In order to completely disconnect the apparatus
from power, the mains plug should be completely removed
from the AC outlet socket.
17. C AUTION: To reduce the risk of fire or explosion, do not expose
batteries to excessive heat such as sunshine, fire or other
heat sources.
— E1 —
Included
Please make sure the following items are included.
Wired Interactive Microphone
AC Adapter
Manual
Main Unit
Wired Microphone
HDMI Cable
Singing Machine Flash Drive
— E2 —
Location of Controls (Top/Front)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
9
25
26
27
28
14
29
1. Disco Ball
2. TFT LCD Color Screen
3. VOCAL/PAIR Button
4. FUNCTION (Monitor ON/OFF) Button
5. MENU Button
6. RECORD Button
7. DISCO BALL Button
8. ON/OFF Button
9. MIC Holder
10. EXTERNAL INPUT VOLUME Control
11. MIC 1 VOLUME Control
12. EXTERNAL INPUT Jack
13. LINE IN Jack
14. Tweeter
15. Bluetooth Indicator
16. Speaker/Lights
17. Navigation LEFT 3 Button
18. Navigation UP 5 Button
19. Navigation RIGHT 4Button
20. Navigation DOWN 6Button
21. USB Slot
22. ENTER/ Button
23. LIGHT MODE Button
24. Remote Sensor
25. ECHO Control
26. MIC 2 Jack
27. MIC 2 VOLUME Control
28. MIC 1 Jack
29. MASTER VOLUME Control
— E3 —
Location of Controls (Rear)
1
4
2
3
1. Adjustable Handle
2. DC IN Jack
3. Wheels
5
4. Handle Release
5. HDMI Jack
— E4 —
Master Volume: 0-20
Record Status
Battery
Status
Lead Vocal Status
Current
Playlist
Song
Elapsed Time
Song
Total Time
Song Title
Playback Status
Location of Controls (Microphones)
Interactive Microphone
5 6
141
32
Standard Microphone
1
1. Mic ON/OFF Switch
2. MENU Button
3. Navigation Buttons
4. ENTER/ Button
5. Remote Transmitter (Rear)
6. Battery Compartment (Rear)
Location of Controls (Playback Display)
— E5 —
Connection
2
Connecting the Microphone(s)
Connection
Connecting the Unit to a TV
v
u
Microphones:
Connect a microphone into Mic jack 1 u
and the other microphone into Mic jack 2
v
(if desired).
Note: Do not drop or tap the Mic as
damage to the Mic or speakers may occur.
Do not twirl the microphone by cord as it
will cause damage to the encased wiring.
The video and lyrics will be
displayed on the built-in screen.
You may also want to connect a
TV to display a larger image and
additional sound; follow the steps
HDMI Jack (Out)
Rear of External TV
HDMI Jack (In)
HDMI IN 1
HDMI Cable
— E6 —
below:
Plug the HDMI cable (included)
into the HDMI Jack on the back of
the unit. Plug the other end of the
HDMI cable into the HDMI input
on your TV.
Notes:
• This unit can be used with or
without a TV.
• Also refer to the TV’s or external
unit’s User Guide.
Connection
Connecting to AC Power
Changing the Interactive Microphone’s Battery
Insert the AC power
1
cord into a conveniently
located AC outlet having
100V-240V/50Hz-60Hz.
Note:
Make all connections before
connecting to AC power.
When performance suffers,
change the batteries as follows:
Unscrew the Battery
1
Compartment screw and
remove the door.
CR2032
BATTERY PRECAUTIONS:
Follow these precautions when using batteries in this device:
1. Warning – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
2. Use only the size and type of batteries specified.
3. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
A reversed battery may cause damage to the device.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
5. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery
manufacturer’s directions.)
6. Remove batteries promptly if consumed.
— E7 —
Replace battery with
2
CR2032 button cell battery.
Replace Battery
3
Compartment and screw.
Rechargeable Battery
This unit comes with a built-in rechargeable battey pack that will allow the unit to be used
without being connected to AC power. The Battery indicator (top right of the display) will
show the battery charge left indicated by the amount of bars.
pack must NOT to be replaced by the user.
To optimize the battery life, we recommend to charge the unit once a month. When the
battery icon turns red and flashing, recharge the unit by following the steps below:
Attention: The sound volume will adjust automatically when the battery is not full.
The rechargeable battery
Insert the AC power
1
cord into a conveniently
located AC outlet having
100V-240V/50Hz-60Hz.
Allow the unit to charge for
2
approximately twelve hours
for a full charge.
Disconnect the AC cord and
3
the fully charged unit can
be used for approximately
five hours depending on the
function chosen.
Recycling and Disposal Information:
• Do not dispose of electronic devices or any of their components.
(especially batteries and LCD displays) in your municipal trash collection.
• Consult your local waste management authority or a recycling organization like
Earth911.com to find an electronics recycling facility in your area.
CAUTION: Rechargeable batteries must be recycled or disposed of properly.
Lead Acid Battery Warning
• This equipment contains a rechargeable valve-regulated lead acid battery.
• Do not charge the battery in temperatures below 32° F (0° C) or higher than 122° F (50° C).
• Do not open or mutilate the battery.
• The rechargeable batteries contained in this equipment may explode if disposed of in a fire.
• Do not short-circuit the battery.
• Do not charge the rechargeable battery pack used in this equipment with any charger other than
the one designed to charge this battery pack, as specified in the owner’s manual. Using another
charger may damage the battery pack or cause the battery pack to explode.
— E8 —
Singing Machine USB Flash Drive
Included with the system
is a Singing Machine USB
Flash Drive, which is used for
storing Karaoke songs as well as
recordings from this unit.
There are two songs included on
the Singing Machine USB Flash
Drive, but you can access the
Karaoke Store for many more
songs. Just follow the Welcome
Kit Instructions!
Inserting the USB Flash Drive
Before you insert the Singing
Machine USB Flash Drive, make
sure to remove it from its stand
which will reveal the USB plug.
— E9 —
Insert it into the USB slot on the
unit with the face towards the
top of the unit.
Loading...